* Add support for parameterizing the ACL config used with a TestAgent
Using tokens that are UUIDs will get rid of some warnings
* Refactor to allow setting all tokens and change the template to ignore unset values.
This should cut down on test flakiness.
Problems handled:
- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.
- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).
- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
The embedded `Server` field on a `DNSServer` is only set inside of the
`ListenAndServe` method. If that method fails for reasons like the
address being in use and is not bindable, then the `Server` field will
not be set and the overall `Agent.Start()` will fail.
This will trigger the inner loop of `TestAgent.Start()` to invoke
`ShutdownEndpoints` which will attempt to pretty print the DNS servers
using fields on that inner `Server` field. Because it was never set,
this causes a nil pointer dereference and crashes the test.
The observed bug was that a full restart of a consul datacenter (servers
and clients) in conjunction with a restart of a connect-flavored
application with bring-your-own-service-registration logic would very
frequently cause the envoy sidecar service check to never reflect the
aliased service.
Over the course of investigation several bugs and unfortunate
interactions were corrected:
(1)
local.CheckState objects were only shallow copied, but the key piece of
data that gets read and updated is one of the things not copied (the
underlying Check with a Status field). When the stock code was run with
the race detector enabled this highly-relevant-to-the-test-scenario field
was found to be racy.
Changes:
a) update the existing Clone method to include the Check field
b) copy-on-write when those fields need to change rather than
incrementally updating them in place.
This made the observed behavior occur slightly less often.
(2)
If anything about how the runLocal method for node-local alias check
logic was ever flawed, there was no fallback option. Those checks are
purely edge-triggered and failure to properly notice a single edge
transition would leave the alias check incorrect until the next flap of
the aliased check.
The change was to introduce a fallback timer to act as a control loop to
double check the alias check matches the aliased check every minute
(borrowing the duration from the non-local alias check logic body).
This made the observed behavior eventually go away when it did occur.
(3)
Originally I thought there were two main actions involved in the data race:
A. The act of adding the original check (from disk recovery) and its
first health evaluation.
B. The act of the HTTP API requests coming in and resetting the local
state when re-registering the same services and checks.
It took awhile for me to realize that there's a third action at work:
C. The goroutines associated with the original check and the later
checks.
The actual sequence of actions that was causing the bad behavior was
that the API actions result in the original check to be removed and
re-added _without waiting for the original goroutine to terminate_. This
means for brief windows of time during check definition edits there are
two goroutines that can be sending updates for the alias check status.
In extremely unlikely scenarios the original goroutine sees the aliased
check start up in `critical` before being removed but does not get the
notification about the nearly immediate update of that check to
`passing`.
This is interlaced wit the new goroutine coming up, initializing its
base case to `passing` from the current state and then listening for new
notifications of edge triggers.
If the original goroutine "finishes" its update, it then commits one
more write into the local state of `critical` and exits leaving the
alias check no longer reflecting the underlying check.
The correction here is to enforce that the old goroutines must terminate
before spawning the new one for alias checks.
Also update some snapshot agent docs
* Enforce correct permissions when registering a check
Previously we had attempted to enforce service:write for a check associated with a service instead of node:write on the agent but due to how we decoded the health check from the request it would never do it properly. This commit fixes that.
* Update website/source/docs/commands/snapshot/agent.html.markdown.erb
Co-Authored-By: mkeeler <mkeeler@users.noreply.github.com>
The DNS config parameters `recursors` and `dns_config.*` are now hot
reloaded on SIGHUP or `consul reload` and do not need an agent restart
to be modified.
Config is stored in an atomic.Value and loaded at the beginning of each
request. Reloading only affects requests that start _after_ the
reload. Ongoing requests are not affected. To match the current
behavior the recursor handler is loaded and unloaded as needed on config
reload.
* First conversion
* Use serf 0.8.2 tag and associated updated deps
* * Move freeport and testutil into internal/
* Make internal/ its own module
* Update imports
* Add replace statements so API and normal Consul code are
self-referencing for ease of development
* Adapt to newer goe/values
* Bump to new cleanhttp
* Fix ban nonprintable chars test
* Update lock bad args test
The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.
* Update another test as well
* Bump travis
* Bump circleci
* Bump go-discover and godo to get rid of launchpad dep
* Bump dockerfile go version
* fix tar command
* Bump go-cleanhttp
This PR introduces reloading tls configuration. Consul will now be able to reload the TLS configuration which previously required a restart. It is not yet possible to turn TLS ON or OFF with these changes. Only when TLS is already turned on, the configuration can be reloaded. Most importantly the certificates and CAs.
In order to be able to reload the TLS configuration, we need one way to generate the different configurations.
This PR introduces a `tlsutil.Configurator` which holds a `tlsutil.Config`. Afterwards it is responsible for rendering every `tls.Config`. In this particular PR I moved `IncomingHTTPSConfig`, `IncomingTLSConfig`, and `OutgoingTLSWrapper` into `tlsutil.Configurator`.
This PR is a pure refactoring - not a single feature added. And not a single test added. I only slightly modified existing tests as necessary.
This way we can avoid unnecessary panics which cause other tests not to run.
This doesn't remove all the possibilities for panics causing other tests not to run, it just fixes the TestAgent
* Add State storage and LastResult argument into Cache so that cache.Types can safely store additional data that is eventually expired.
* New Leaf cache type working and basic tests passing. TODO: more extensive testing for the Root change jitter across blocking requests, test concurrent fetches for different leaves interact nicely with rootsWatcher.
* Add multi-client and delayed rotation tests.
* Typos and cleanup error handling in roots watch
* Add comment about how the FetchResult can be used and change ca leaf state to use a non-pointer state.
* Plumb test override of root CA jitter through TestAgent so that tests are deterministic again!
* Fix failing config test
Fixes#4515
This just slightly refactors the logic to only attempt to set the serf wan reconnect timeout when the rest of the serf wan settings are configured - thus avoiding a segfault.
* Refactors the HTTP listen path to create servers in the same spot.
* Adds HTTP/2 support to Consul's HTTPS server.
* Vendors Go HTTP/2 library and associated deps.
The anti-entropy tests relied on the side-effect of the StartSync()
method to perform a full sync instead of a partial sync. This lead to
multiple anti-entropy go routines being started unnecessary retry loops.
This change changes the behavior to perform synchronous full syncs when
necessary removing the need for all of the time.Sleep and most of the
retry loops.
The anti-entropy tests relied on the side-effect of the StartSync()
method to perform a full sync instead of a partial sync. This lead to
multiple anti-entropy go routines being started unnecessary retry loops.
This change changes the behavior to perform synchronous full syncs when
necessary removing the need for all of the time.Sleep and most of the
retry loops.
This patch removes the porter tool which hands out free ports from a
given range with a library which does the same thing. The challenge for
acquiring free ports in concurrent go test runs is that go packages are
tested concurrently and run in separate processes. There has to be some
inter-process synchronization in preventing processes allocating the
same ports.
freeport allocates blocks of ports from a range expected to be not in
heavy use and implements a system-wide mutex by binding to the first
port of that block for the lifetime of the application. Ports are then
provided sequentially from that block and are tested on localhost before
being returned as available.
* agent: consolidate http method not allowed checks
This patch uses the error handling of the http handlers to handle HTTP
method not allowed errors across all available endpoints. It also adds a
test for testing whether the endpoints respond with the correct status
code.
* agent: do not panic on metrics tests
* agent: drop other tests for MethodNotAllowed
* agent: align /agent/join with reality
/agent/join uses PUT instead of GET as documented.
* agent: align /agent/check/{fail,warn,pass} with reality
/agent/check/{fail,warn,pass} uses PUT instead of GET as documented.
* fix some tests
* Drop more tests for method not allowed
* Align TestAgent_RegisterService_InvalidAddress with reality
* Changes API client join to use PUT instead of GET.
* Fixes agent endpoint verbs and removes obsolete tests.
* Updates the change log.
* new config parser for agent
This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:
* add HCL support
* all configuration fragments in tests and for default config are
expressed as HCL fragments
* HCL fragments can be provided on the command line so that they
can eventually replace the command line flags.
* HCL/JSON fragments are parsed into a temporary Config structure
which can be merged using reflection (all values are pointers).
The existing merge logic of overwrite for values and append
for slices has been preserved.
* A single builder process generates a typed runtime configuration
for the agent.
The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.
The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.
* Upgrade github.com/hashicorp/hcl to support int64
* improve error messages
* fix directory permission test
* Fix rtt test
* Fix ForceLeave test
* Skip performance test for now until we know what to do
* Update github.com/hashicorp/memberlist to update log prefix
* Make memberlist use the default logger
* improve config error handling
* do not fail on non-existing data-dir
* experiment with non-uniform timeouts to get a handle on stalled leader elections
* Run tests for packages separately to eliminate the spurious port conflicts
* refactor private address detection and unify approach for ipv4 and ipv6.
Fixes#2825
* do not allow unix sockets for DNS
* improve bind and advertise addr error handling
* go through builder using test coverage
* minimal update to the docs
* more coverage tests fixed
* more tests
* fix makefile
* cleanup
* fix port conflicts with external port server 'porter'
* stop test server on error
* do not run api test that change global ENV concurrently with the other tests
* Run remaining api tests concurrently
* no need for retry with the port number service
* monkey patch race condition in go-sockaddr until we understand why that fails
* monkey patch hcl decoder race condidtion until we understand why that fails
* monkey patch spurious errors in strings.EqualFold from here
* add test for hcl decoder race condition. Run with go test -parallel 128
* Increase timeout again
* cleanup
* don't log port allocations by default
* use base command arg parsing to format help output properly
* handle -dc deprecation case in Build
* switch autopilot.max_trailing_logs to int
* remove duplicate test case
* remove unused methods
* remove comments about flag/config value inconsistencies
* switch got and want around since the error message was misleading.
* Removes a stray debug log.
* Removes a stray newline in imports.
* Fixes TestACL_Version8.
* Runs go fmt.
* Adds a default case for unknown address types.
* Reoders and reformats some imports.
* Adds some comments and fixes typos.
* Reorders imports.
* add unix socket support for dns later
* drop all deprecated flags and arguments
* fix wrong field name
* remove stray node-id file
* drop unnecessary patch section in test
* drop duplicate test
* add test for LeaveOnTerm and SkipLeaveOnInt in client mode
* drop "bla" and add clarifying comment for the test
* split up tests to support enterprise/non-enterprise tests
* drop raft multiplier and derive values during build phase
* sanitize runtime config reflectively and add test
* detect invalid config fields
* fix tests with invalid config fields
* use different values for wan sanitiziation test
* drop recursor in favor of recursors
* allow dns_config.udp_answer_limit to be zero
* make sure tests run on machines with multiple ips
* Fix failing tests in a few more places by providing a bind address in the test
* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.
* Add porter to server_test.go to make tests there less flaky
* go fmt
When the agent is triggered to shutdown via an external 'consul leave'
command delivered via the HTTP API then the client expects to receive a
response when the agent is down. This creates a race on when to shutdown
the agent itself like the RPC server, the checks and the state and the
external endpoints like DNS and HTTP.
This patch splits the shutdown process into two parts:
* shutdown the agent
* shutdown the endpoints (http and dns)
They can be executed multiple times, concurrently and in any order but
should be executed first agent, then endpoints to provide consistent
behavior across all use cases. Both calls have to be executed for a
proper shutdown.
This could be partially hidden in a single function but would introduce
some magic that happens behind the scenes which one has to know of but
isn't obvious.
Fixes#2880
Matt Keeler