Receiving an "acl not found" error from an RPC in the agent cache and the
streaming/event components will cause any request loops to cease under the
assumption that they will never work again if the token was destroyed. This
prevents log spam (#14144, #9738).
Unfortunately due to things like:
- authz requests going to stale servers that may not have witnessed the token
creation yet
- authz requests in a secondary datacenter happening before the tokens get
replicated to that datacenter
- authz requests from a primary TO a secondary datacenter happening before the
tokens get replicated to that datacenter
The caller will get an "acl not found" *before* the token exists, rather than
just after. The machinery added above in the linked PRs will kick in and
prevent the request loop from looping around again once the tokens actually
exist.
For `consul-dataplane` usages, where xDS is served by the Consul servers
rather than the clients ultimately this is not a problem because in that
scenario the `agent/proxycfg` machinery is on-demand and launched by a new xDS
stream needing data for a specific service in the catalog. If the watching
goroutines are terminated it ripples down and terminates the xDS stream, which
CDP will eventually re-establish and restart everything.
For Consul client usages, the `agent/proxycfg` machinery is ahead-of-time
launched at service registration time (called "local" in some of the proxycfg
machinery) so when the xDS stream comes in the data is already ready to go. If
the watching goroutines terminate it should terminate the xDS stream, but
there's no mechanism to re-spawn the watching goroutines. If the xDS stream
reconnects it will see no `ConfigSnapshot` and will not get one again until
the client agent is restarted, or the service is re-registered with something
changed in it.
This PR fixes a few things in the machinery:
- there was an inadvertent deadlock in fetching snapshot from the proxycfg
machinery by xDS, such that when the watching goroutine terminated the
snapshots would never be fetched. This caused some of the xDS machinery to
get indefinitely paused and not finish the teardown properly.
- Every 30s we now attempt to re-insert all locally registered services into
the proxycfg machinery.
- When services are re-inserted into the proxycfg machinery we special case
"dead" ones such that we unilaterally replace them rather that doing that
conditionally.
Protobuf Refactoring for Multi-Module Cleanliness
This commit includes the following:
Moves all packages that were within proto/ to proto/private
Rewrites imports to account for the packages being moved
Adds in buf.work.yaml to enable buf workspaces
Names the proto-public buf module so that we can override the Go package imports within proto/buf.yaml
Bumps the buf version dependency to 1.14.0 (I was trying out the version to see if it would get around an issue - it didn't but it also doesn't break things and it seemed best to keep up with the toolchain changes)
Why:
In the future we will need to consume other protobuf dependencies such as the Google HTTP annotations for openapi generation or grpc-gateway usage.
There were some recent changes to have our own ratelimiting annotations.
The two combined were not working when I was trying to use them together (attempting to rebase another branch)
Buf workspaces should be the solution to the problem
Buf workspaces means that each module will have generated Go code that embeds proto file names relative to the proto dir and not the top level repo root.
This resulted in proto file name conflicts in the Go global protobuf type registry.
The solution to that was to add in a private/ directory into the path within the proto/ directory.
That then required rewriting all the imports.
Is this safe?
AFAICT yes
The gRPC wire protocol doesn't seem to care about the proto file names (although the Go grpc code does tack on the proto file name as Metadata in the ServiceDesc)
Other than imports, there were no changes to any generated code as a result of this.
* Stub proxycfg handler for API gateway
* Add Service Kind constants/handling for API Gateway
* Begin stubbing for SDS
* Add new Secret type to xDS order of operations
* Continue stubbing of SDS
* Iterate on proxycfg handler for API gateway
* Handle BoundAPIGateway config entry subscription in proxycfg-glue
* Add API gateway to config snapshot validation
* Add API gateway to config snapshot clone, leaf, etc.
* Subscribe to bound route + cert config entries on bound-api-gateway
* Track routes + certs on API gateway config snapshot
* Generate DeepCopy() for types used in watch.Map
* Watch all active references on api-gateway, unwatch inactive
* Track loading of initial bound-api-gateway config entry
* Use proper proto package for SDS mapping
* Use ResourceReference instead of ServiceName, collect resources
* Fix typo, add + remove TODOs
* Watch discovery chains for TCPRoute
* Add TODO for updating gateway services for api-gateway
* make proto
* Regenerate deep-copy for proxycfg
* Set datacenter on upstream ID from query source
* Watch discovery chains for http-route service backends
* Add ServiceName getter to HTTP+TCP Service structs
* Clean up unwatched discovery chains on API Gateway
* Implement watch for ingress leaf certificate
* Collect upstreams on http-route + tcp-route updates
* Remove unused GatewayServices update handler
* Remove unnecessary gateway services logic for API Gateway
* Remove outdate TODO
* Use .ToIngress where appropriate, including TODO for cleaning up
* Cancel before returning error
* Remove GatewayServices subscription
* Add godoc for handlerAPIGateway functions
* Update terminology from Connect => Consul Service Mesh
Consistent with terminology changes in https://github.com/hashicorp/consul/pull/12690
* Add missing TODO
* Remove duplicate switch case
* Rerun deep-copy generator
* Use correct property on config snapshot
* Remove unnecessary leaf cert watch
* Clean up based on code review feedback
* Note handler properties that are initialized but set elsewhere
* Add TODO for moving helper func into structs pkg
* Update generated DeepCopy code
* gofmt
* Generate DeepCopy() for API gateway listener types
* Improve variable name
* Regenerate DeepCopy() code
* Fix linting issue
* Temporarily remove the secret type from resource generation
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Add handler errors
* Set the global read and write limits
* fixing multilimiter moving packages
* Fix typo
* Simplify globalLimit usage
* add multilimiter and tests
* exporting LimitedEntity
* Apply suggestions from code review
Co-authored-by: John Murret <john.murret@hashicorp.com>
* add config update and rename config params
* add doc string and split config
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* use timer to avoid go routine leak and change the interface
* add comments to tests
* fix failing test
* add prefix with config edge, refactor tests
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* refactor to apply configs for limiters under a prefix
* add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic
* make KeyType an exported type
* split the config and limiter trees to fix race conditions in config update
* rename variables
* fix race in test and remove dead code
* fix reconcile loop to not create a timer on each loop
* add extra benchmark tests and fix tests
* fix benchmark test to pass value to func
* server: add placeholder glue for rate limit handler
This commit adds a no-op implementation of the rate-limit handler and
adds it to the `consul.Server` struct and setup code.
This allows us to start working on the net/rpc and gRPC interceptors and
config logic.
* Set the global read and write limits
* fixing multilimiter moving packages
* add server configuration for global rate limiting.
* remove agent test
* remove added stuff from handler
* remove added stuff from multilimiter
* removing unnecessary TODOs
* Removing TODO comment from handler
* adding in defaulting to infinite
* add disabled status in there
* adding in documentation for disabled mode.
* make disabled the default.
* Add mock and agent test
* addig documentation and missing mock file.
* Fixing test TestLoad_IntegrationWithFlags
* updating docs based on PR feedback.
* Updating Request Limits mode to use int based on PR feedback.
* Adding RequestLimits struct so we have a nested struct in ReloadableConfig.
* fixing linting references
* Update agent/consul/rate/handler.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* Update agent/consul/config.go
Co-authored-by: Dan Upton <daniel@floppy.co>
* removing the ignore of the request limits in JSON. addingbuilder logic to convert any read rate or write rate less than 0 to rate.Inf
* added conversion function to convert request limits object to handler config.
* Updating docs to reflect gRPC and RPC are rate limit and as a result, HTTP requests are as well.
* Updating values for TestLoad_FullConfig() so that they were different and discernable.
* Updating TestRuntimeConfig_Sanitize
* Fixing TestLoad_IntegrationWithFlags test
* putting nil check in place
* fixing rebase
* removing change for missing error checks. will put in another PR
* Rebasing after default multilimiter config change
* resolving rebase issues
* updating reference for incomingRPCLimiter to use interface
* updating interface
* Updating interfaces
* Fixing mock reference
Co-authored-by: Daniel Upton <daniel@floppy.co>
Co-authored-by: Dhia Ayachi <dhia@hashicorp.com>
* integ-test: test consul upgrade from the snapshot of a running cluster
* use Target version as default
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* auto-config: relax node name validation for JWT authorization
This changes the JWT authorization logic to allow all non-whitespace,
non-quote characters when validating node names. Consul had previously
allowed these characters in node names, until this validation was added
to fix a security vulnerability with whitespace/quotes being passed to
the `bexpr` library. This unintentionally broke node names with
characters like `.` which aren't related to this vulnerability.
* Update website/content/docs/agent/config/cli-flags.mdx
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com>
Prevent serving TLS via ports.grpc
We remove the ability to run the ports.grpc in TLS mode to avoid
confusion and to simplify configuration. This breaking change
ensures that any user currently using ports.grpc in an encrypted
mode will receive an error message indicating that ports.grpc_tls
must be explicitly used.
The suggested action for these users is to simply swap their ports.grpc
to ports.grpc_tls in the configuration file. If both ports are defined,
or if the user has not configured TLS for grpc, then the error message
will not be printed.
* update go version to 1.18 for api and sdk, go mod tidy
* removes ioutil usage everywhere which was deprecated in go1.16 in favour of io and os packages. Also introduces a lint rule which forbids use of ioutil going forward.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
This continues the work done in #14908 where a crude solution to prevent a
goroutine leak was implemented. The former code would launch a perpetual
goroutine family every iteration (+1 +1) and the fixed code simply caused a
new goroutine family to first cancel the prior one to prevent the
leak (-1 +1 == 0).
This PR refactors this code completely to:
- make it more understandable
- remove the recursion-via-goroutine strangeness
- prevent unnecessary RPC fetches when the prior one has errored.
The core issue arose from a conflation of the entry.Fetching field to mean:
- there is an RPC (blocking query) in flight right now
- there is a goroutine running to manage the RPC fetch retry loop
The problem is that the goroutine-leak-avoidance check would treat
Fetching like (2), but within the body of a goroutine it would flip that
boolean back to false before the retry sleep. This would cause a new
chain of goroutines to launch which #14908 would correct crudely.
The refactored code uses a plain for-loop and changes the semantics
to track state for "is there a goroutine associated with this cache entry"
instead of the former.
We use a uint64 unique identity per goroutine instead of a boolean so
that any orphaned goroutines can tell when they've been replaced when
the expiry loop deletes a cache entry while the goroutine is still running
and is later replaced.
Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created.
Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
Adds a user-configurable rate limiter to proxycfg snapshot delivery,
with a default limit of 250 updates per second.
This addresses a problem observed in our load testing of Consul
Dataplane where updating a "global" resource such as a wildcard
intention or the proxy-defaults config entry could starve the Raft or
Memberlist goroutines of CPU time, causing general cluster instability.
Preivously the TLS configurator would default to presenting auto TLS
certificates as client certificates.
Server agents should not have this behavior and should instead present
the manually configured certs. The autoTLS certs for servers are
exclusively used for peering and should not be used as the default for
outbound communication.
To ease the transition for users, the original gRPC
port can still operate in a deprecated mode as either
plain-text or TLS mode. This behavior should be removed
in a future release whenever we no longer support this.
The resulting behavior from this commit is:
`ports.grpc > 0 && ports.grpc_tls > 0` spawns both plain-text and tls ports.
`ports.grpc > 0 && grpc.tls == undefined` spawns a single plain-text port.
`ports.grpc > 0 && grpc.tls != undefined` spawns a single tls port (backwards compat mode).
* defaulting to false because peering will be released as beta
* Ignore peering disabled error in bundles cachetype
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: freddygv <freddy@hashicorp.com>
Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
- Introduce a new telemetry configurable parameter retry_failed_connection. User can set the value to true to let consul agent continue its start process on failed connection to datadog server. When set to false, agent will stop on failed start. The default behavior is true.
Co-authored-by: Dan Upton <daniel@floppy.co>
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
