This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.
In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
This should cut down on test flakiness.
Problems handled:
- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.
- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).
- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
* Support for maximum size for Output of checks
This PR allows users to limit the size of output produced by checks at the agent
and check level.
When set at the agent level, it will limit the output for all checks monitored
by the agent.
When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.
Default value is 4k, and input must be at least 1.
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.
This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.
This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
This PR introduces reloading tls configuration. Consul will now be able to reload the TLS configuration which previously required a restart. It is not yet possible to turn TLS ON or OFF with these changes. Only when TLS is already turned on, the configuration can be reloaded. Most importantly the certificates and CAs.
This PR adds two features which will be useful for operators when ACLs are in use.
1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)
Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.
Some other secondary changes:
* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid.
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
In order to be able to reload the TLS configuration, we need one way to generate the different configurations.
This PR introduces a `tlsutil.Configurator` which holds a `tlsutil.Config`. Afterwards it is responsible for rendering every `tls.Config`. In this particular PR I moved `IncomingHTTPSConfig`, `IncomingTLSConfig`, and `OutgoingTLSWrapper` into `tlsutil.Configurator`.
This PR is a pure refactoring - not a single feature added. And not a single test added. I only slightly modified existing tests as necessary.
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description
At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.
On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.
Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
A server running the new system must still support other clients using the legacy system.
A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.
So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
* Adds client-side retry for no leader errors.
This paves over the case where the client was connected to the leader
when it loses leadership.
* Adds a configurable server RPC drain time and a fail-fast path for RPCs.
When a server leaves it gets removed from the Raft configuration, so it will
never know who the new leader server ends up being. Without this we'd be
doomed to wait out the RPC hold timeout and then fail. This makes things fail
a little quicker while a sever is draining, and since we added a client retry
AND since the server doing this has already shut down and left the Serf LAN,
clients should retry against some other server.
* Makes the RPC hold timeout configurable.
* Reorders struct members.
* Sets the RPC hold timeout default for test servers.
* Bumps the leave drain time up to 5 seconds.
* Robustifies retries with a simpler client-side RPC hold.
* Reverts untended delete.
* Changes default Raft protocol to 3.
* Changes numPeers() to report only voters.
This should have been there before, but it's more obvious that this
is incorrect now that we default the Raft protocol to 3, which puts
new servers in a read-only state while Autopilot waits for them to
become healthy.
* Fixes TestLeader_RollRaftServer.
* Fixes TestOperator_RaftRemovePeerByAddress.
* Fixes TestServer_*.
Relaxed the check for a given number of voter peers and instead do
a thorough check that all servers see each other in their Raft
configurations.
* Fixes TestACL_*.
These now just check for Raft replication to be set up, and don't
care about the number of voter peers.
* Fixes TestOperator_Raft_ListPeers.
* Fixes TestAutopilot_CleanupDeadServerPeriodic.
* Fixes TestCatalog_ListNodes_ConsistentRead_Fail.
* Fixes TestLeader_ChangeServerID and adjusts the conn pool to throw away
sockets when it sees io.EOF.
* Changes version to 1.0.0 in the options doc.
* Makes metrics test more deterministic with autopilot metrics possible.
* new config parser for agent
This patch implements a new config parser for the consul agent which
makes the following changes to the previous implementation:
* add HCL support
* all configuration fragments in tests and for default config are
expressed as HCL fragments
* HCL fragments can be provided on the command line so that they
can eventually replace the command line flags.
* HCL/JSON fragments are parsed into a temporary Config structure
which can be merged using reflection (all values are pointers).
The existing merge logic of overwrite for values and append
for slices has been preserved.
* A single builder process generates a typed runtime configuration
for the agent.
The new implementation is more strict and fails in the builder process
if no valid runtime configuration can be generated. Therefore,
additional validations in other parts of the code should be removed.
The builder also pre-computes all required network addresses so that no
address/port magic should be required where the configuration is used
and should therefore be removed.
* Upgrade github.com/hashicorp/hcl to support int64
* improve error messages
* fix directory permission test
* Fix rtt test
* Fix ForceLeave test
* Skip performance test for now until we know what to do
* Update github.com/hashicorp/memberlist to update log prefix
* Make memberlist use the default logger
* improve config error handling
* do not fail on non-existing data-dir
* experiment with non-uniform timeouts to get a handle on stalled leader elections
* Run tests for packages separately to eliminate the spurious port conflicts
* refactor private address detection and unify approach for ipv4 and ipv6.
Fixes#2825
* do not allow unix sockets for DNS
* improve bind and advertise addr error handling
* go through builder using test coverage
* minimal update to the docs
* more coverage tests fixed
* more tests
* fix makefile
* cleanup
* fix port conflicts with external port server 'porter'
* stop test server on error
* do not run api test that change global ENV concurrently with the other tests
* Run remaining api tests concurrently
* no need for retry with the port number service
* monkey patch race condition in go-sockaddr until we understand why that fails
* monkey patch hcl decoder race condidtion until we understand why that fails
* monkey patch spurious errors in strings.EqualFold from here
* add test for hcl decoder race condition. Run with go test -parallel 128
* Increase timeout again
* cleanup
* don't log port allocations by default
* use base command arg parsing to format help output properly
* handle -dc deprecation case in Build
* switch autopilot.max_trailing_logs to int
* remove duplicate test case
* remove unused methods
* remove comments about flag/config value inconsistencies
* switch got and want around since the error message was misleading.
* Removes a stray debug log.
* Removes a stray newline in imports.
* Fixes TestACL_Version8.
* Runs go fmt.
* Adds a default case for unknown address types.
* Reoders and reformats some imports.
* Adds some comments and fixes typos.
* Reorders imports.
* add unix socket support for dns later
* drop all deprecated flags and arguments
* fix wrong field name
* remove stray node-id file
* drop unnecessary patch section in test
* drop duplicate test
* add test for LeaveOnTerm and SkipLeaveOnInt in client mode
* drop "bla" and add clarifying comment for the test
* split up tests to support enterprise/non-enterprise tests
* drop raft multiplier and derive values during build phase
* sanitize runtime config reflectively and add test
* detect invalid config fields
* fix tests with invalid config fields
* use different values for wan sanitiziation test
* drop recursor in favor of recursors
* allow dns_config.udp_answer_limit to be zero
* make sure tests run on machines with multiple ips
* Fix failing tests in a few more places by providing a bind address in the test
* Gets rid of skipped TestAgent_CheckPerformanceSettings and adds case for builder.
* Add porter to server_test.go to make tests there less flaky
* go fmt
R.B. Boyer