* ui: Filter global intentions list by namespace and partition
Filters global intention listing by the current partition rather than trying to use a wildcard.
* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
> In the future, this should all be moved to each individual repository now, which will mean we can finally get rid of this service.
This PR moves reconciliation to 'each individual repository'. I stopped short of getting rid of the service, but its so small now we pretty much don't need it. I'd rather wait until I look at the equivalent DataSink service and see if we can get rid of both equivalent services together (this also currently dependant on work soon to be merged)
Reconciliation of models (basically doing the extra work to clean up the ember-data store and bring our frontend 'truth' into line with the actual backend truth) when blocking/long-polling on different views/filters of data is slightly more complicated due to figuring out what should be cleaned up and what should be left in the store. This is especially apparent for KVs.
I built in a such a way to hopefully make sure it will all make sense for the future. I also checked that this all worked nicely with all our models, even KV which has never supported blocking queries. I left all that work in so that if we want to enable blocking queries/live updates for KV it now just involves deleting a couple of lines of code.
There is a tonne of old stuff that we can clean up here now (our 'fake headers' that we pass around) and I've added that to my list of thing for a 'Big Cleanup PR' that will remove lots of code that we no longer require.
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.
The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.
Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.
Notes:
Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
During #9617 we added a list view only for AuthMethods, but not a detail view. We did add the Adapter/Serializer that collected/reshaped data for a detail view.
The test for this serializer was skipped here, but I'm not sure why.
We then added #9845 which began to use this AuthMethod Serializer, but we didn't go back to finish up the skipped test here either.
This PR unskips this test and finishes off the test correctly.
The default namespace, and the tokens default namespace (or its origin namespace) is slightly more complicated than other things we deal with in the UI, there's plenty of info/docs on this that I've added in this PR.
Previously:
When a namespace was not specified in the URL, we used to default to the default namespace. When you logged in using a token we automatically forward you the namespace URL that your token originates from, so you are then using the namespace for your token by default. You can of course then edit the URL to remove the namespace portion, or perhaps revisit the UI at the root path with you token already set. In these latter cases we would show you information from the default namespace. So if you had no namespace segment/portion in the URL, we would assume default, perform actions against the default namespace and highlight the default namespace in the namespace selector menu. If you wanted to perform actions in your tokens origin namespace you would have to manually select it from the namespace selector menu.
This PR:
Now, when you have no namespace segment/portion in the URL, we use the token's origin namespace instead (and if you don't have a token, we then use the default namespace like it was previously)
Notes/thoughts:
I originally thought we were showing an incorrectly selected namespace in the namespace selector, but it also matched up with what we were doing with the API, so it was in fact correct. The issue was more that we weren't selecting the origin namespace of the token for the user when a namespace segment was omitted from the URL. Seeing as we automatically forward you to the tokens origin namespace when you log in, and we were correctly showing the namespace we were acting on when you had no namespace segment in the URL (in the previous case default), I'm not entirely sure how much of an issue this actually was.
This characteristic of namespace+token+namespace is a little weird and its easy to miss a subtlety or two so I tried to add some documentation in here for future me/someone else (including some in depth code comment around one of the API endpoints where this is very subtle and very hard to miss). I'm not the greatest at words, so would be great to get some edits there if it doesn't seem clear to folks.
The fact that we used to save your previous datacenter and namespace into local storage for reasons also meant the interaction here was slightly more complicated than it needed to be, so whilst we were here we rejigged things slightly to satisfy said reasons still but not use local storage (we try and grab the info from higher up). A lot of the related code here is from before we had our Routlets which I think could probably make all of this a lot less complicated, but I didn't want to do a wholesale replacement in this PR, we can save that for a separate PR on its own at some point.
* Create BindingRule adapter and tests
* Create BindingRule serializer and test
* Create BindingRule model and repository
* Add binding-rules mock data
* Create binding-rules router and call endpoint
* Create Binding rules tab
* Create and use BindingView component
* Create empty state for BindingView
* Remove binding rule requestForQueryRecord endpoint and tests
* Update binding rules selector to be monospaced
* Add bind type tooltip
* Create and Tabular-dl styling component
* Update hr tag global styling
* Rename BindingView to BindingList and refactor
* Add translations for bind types tooltip info
* Remove unused endpoint
* Refactor based on review notes
We use a `<DataSource @src={{url}} />` component throughout our UI for when we want to load data from within our components. The URL specified as the `@src` is used to map/lookup what is used in to retrieve data, for example we mostly use our repository methods wrapped with our Promise backed `EventSource` implementation, but DataSource URLs can also be mapped to EventTarget backed `EventSource`s and native `EventSource`s or `WebSockets` if we ever need to use those (for example these are options for potential streaming support with the Consul backend).
The URL to function/method mapping previous to this PR used a very naive humongous `switch` statement which was a temporary 'this is fine for the moment' solution, although we'd always wanted to replace with something more manageable.
Here we add `wayfarer` as a dependency - a very small (1kb), very fast, radix trie based router, and use that to perform the URL to function/method mapping.
This essentially turns every `DataSource` into a very small SPA - change its URL and the view of data changes. When the data itself changes, either the yielded view of data changes or the `onchange` event is fired with the changed data, making the externally sourced view of data completely reactive.
```javascript
// use the new decorator a service somewhere to annotate/decorate
// a method with the URL that can be used to access this method
@dataSource('/:ns/:dc/services')
async findAllByDatacenter(params) {
// get the data
}
// can use with JS in a route somewhere
async model() {
return this.data.source(uri => uri`/${nspace}/${dc}/services`)
}
```
```hbs
{{!-- or just straight in a template using the component --}}
<DataSource @src="/default/dc1/services" @onchange="" />
```
This also uses a new `container` Service to automatically execute/import certain services yet not execute them. This new service also provides a lookup that supports both standard ember DI lookup plus Class based lookup or these specific services. Lastly we also provide another debug function called DataSourceRoutes() which can be called from console which gives you a list of URLs and their mappings.
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
* Create mock-api endpoints for auth-methods
* Implement auth-method endpoints and model with tests
* Create route and tab for auth-methods
* Create auth-method list and type components with styles
* Add JWT and OIDC svg logos to codebase
* Add brand translations
* Add SearchBar to Auth Methods
* Add acceptance test for Auth Methods UI
* Skip auth method repo test
* Changes from review notes
* Fixup auth-method modela and mock-data
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Skip repo test
* Fix to breaking serializer test
* Implement auth-method endpoints and model with tests
* Add acceptance test for Auth Methods UI
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Fix to breaking serializer test
* Update class for search
* Add auth-methods link to sidebar
* Fixup PR review notes
* Fixup review notes
* Only show OIDC filter with enterprise
* Update conditionals for MaxTokenTTL & TokenLocality
* Refactor
Adds a 'status' for the filtering/searching in the UI, without this its not super clear that you are filtering a recordset due to the menu selections being hidden once closed. You can also use the pills in this status view to delete individual filters.
* ui: Convert Service.GatewayConfig to a model fragment
We added the ember-intl addon, which has its own format-number helper.
We replaced our own similarly named helper with this one, but the
ember-intl one is far stricter and errors if the arguments passed are
undefined. Our previously one would cope with this.
We'd rather continue to use the stricter ember-intl helper, so here we
convert the GatewayConfig property to a model fragment so that we can
give the GatewayConfig.AssociatedServices property a default zero value.
This PR adds the ns=* query parameter when namespaces are enabled to keep backwards compatibility with how the UI used to work (Intentions page always lists all intention across all namespace you have access to)
I found a tiny dev bug for printing out the current URL during acceptance testing and fixed that up while I was there.
Nodes themselves are not namespaced, so we'd originally assumed we did not need to pass through the ns query parameter when listing or viewing nodes.
As it turns out the API endpoints we use to list and view nodes (and related things) return things that are namespaced, therefore any API requests for nodes do require a the ns query parameter to be passed through to the request.
This PR adds the necessary ns query param to all things Node, apart from the querying for the leader which only returns node related information.
Additionally here we decided to show 0 Services text in the node listing if there are nodes with no service instances within the namespace you are viewing, as this is clearer than showing nothing at all. We also cleaned up/standardized the text we use to in the empty state for service instances.
* ui: Install ember-intl
Also:
1. Removes our own format-number in order to use ember-intl's instead
2. Moves format-time to format-short-time so as to not clash with
ember-intls own format-time
* Add `Local` property to Datacenters
* If you have not previous datacenter, redirect the user to the local dc
* Add an `is-local` class to the local datacenter in the DC picker
* Switch upstream-instances to use new style of searchable
* Add search action to DataCollection plus basic README
* Use DataCollection for PowerSelect searching in child-selectors
* Remove old style filterable search for role/policies and instances
* Remove old helpers/components related to search/sort/filter
* Model layer changes to turn Node:ServiceInstances into hasMany
We tried to make something that feels a little like ember-data yet
not leave our approach of re-shaping the JSON directly from the
response.
1. We added transformHasManyResponse for re-shaping JSON for hasMany
relationships. we avoided the normalize word as ember-data serialize
methods usually return something JSON:API shaped and we distinctly don't
want to do that. Transform was the best word we could think of.
2. The integration tests across all of our models here feel very much
like those types of tests that aren't really testing much, or assert
too much to an extent that they get in the way rather than be of any
use. I'd very much like to move a lot of this to unit tests. Currently
most of the fingerprinting functionality is unit tested and these
integration tests were originally to give confidence that IDs and
related properties were being added correctly.
3. We've added a hasMany relationship, but not the corresponding
belongsTo - yet at least. We don't require the belongsTo right now, and
if we do we can add it later.
* Integrate ServiceInstance search bar for Node:ServiceInstances
* Hide Node.Meta when on the Node:ServiceINstance page
We use a little string replace hack here for a human-like label, this is
soon to be replaced with proper i10n replacement
* Always ensure that a Namespace is set, and add comment explaining
* Adds model layer changes around HealthChecks
1. Makes a HealthCheck model fragment and uses it in ServiceInstances and
Nodes
2. Manually adds a relationship between a ServiceInstance and its
potential ServiceInstanceProxy
3. Misc changes related to the above such as an Exposed property on
MeshChecks, MeshChecks itself
* Add a potential temporary endpoint to distinguish ProxyServiceInstance
* Fix up Node search bar class
* Add search/sort/filter logic
* Fixup Service default sort key
* Add Healthcheck search/sort/filtering
* Tweak CSS add a default Type of 'Serf' when type is blank
* Fix up tests and new test support
* Add ability to search on Service/Node name depending on where you are
* Fixup CheckID search predicate
* Use computed for DataCollection to use caching
* Alpha sort the Type menu
* Temporary fix for new non-changing style Ember Proxys
* Only special case EventSource proxies
* Refactor grid styling for Topology page
* Crate TopologyMetrics Button component and move styling
* Create intention ID
* fixup button styling
* Return a link to the create intention page
* Rename Button to Popover component
* Fixup serializer test
* ui: Inline Topology Intention Actions (#9153)
* Add arrow and dot to/from metrics back in
* Add addional space to have metrics wrap and show in smaller screens
* Move logic for finding positioning
* Use color variables
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* ui: Add the most basic workspace root in /ui
* We already have a LICENSE file in the repository root
* Change directory path in build scripts ui-v2 -> ui
* Make yarn install flags configurable from elsewhere
* Minimal workspace root makefile
* Call the new docker specific target
* Update yarn in the docker build image
* Reconfigure the netlify target and move to the higher makefile
* Move ui-v2 -> ui/packages/consul-ui
* Change repo root to refleect new folder structure
* Temporarily don't hoist consul-api-double
* Fixup CI configuration
* Fixup lint errors
* Fixup Netlify target
John Cowen