Fix configuration merging for implicit tproxy upstreams.
Change the merging logic so that the wildcard upstream has correct proxy-defaults
and service-defaults values combined into it. It did not previously merge all fields,
and the wildcard upstream did not exist unless service-defaults existed (it ignored
proxy-defaults, essentially).
Change the way we fetch upstream configuration in the xDS layer so that it falls back
to the wildcard when no matching upstream is found. This is what allows implicit peer
upstreams to have the correct "merged" config.
Change proxycfg to always watch local mesh gateway endpoints whenever a peer upstream
is found. This simplifies the logic so that we do not have to inspect the "merged"
configuration on peer upstreams to extract the mesh gateway mode.
* Fix mesh gateway proxy-defaults not affecting upstreams.
* Clarify distinction with upstream settings
Top-level mesh gateway mode in proxy-defaults and service-defaults gets
merged into NodeService.Proxy.MeshGateway, and only gets merged with
the mode attached to an an upstream in proxycfg/xds.
* Fix mgw mode usage for peered upstreams
There were a couple issues with how mgw mode was being handled for
peered upstreams.
For starters, mesh gateway mode from proxy-defaults
and the top-level of service-defaults gets stored in
NodeService.Proxy.MeshGateway, but the upstream watch for peered data
was only considering the mesh gateway config attached in
NodeService.Proxy.Upstreams[i]. This means that applying a mesh gateway
mode via global proxy-defaults or service-defaults on the downstream
would not have an effect.
Separately, transparent proxy watches for peered upstreams didn't
consider mesh gateway mode at all.
This commit addresses the first issue by ensuring that we overlay the
upstream config for peered upstreams as we do for non-peered. The second
issue is addressed by re-using setupWatchesForPeeredUpstream when
handling transparent proxy updates.
Note that for transparent proxies we do not yet support mesh gateway
mode per upstream, so the NodeService.Proxy.MeshGateway mode is used.
* Fix upstream mesh gateway mode handling in xds
This commit ensures that when determining the mesh gateway mode for
peered upstreams we consider the NodeService.Proxy.MeshGateway config as
a baseline.
In absense of this change, setting a mesh gateway mode via
proxy-defaults or the top-level of service-defaults will not have an
effect for peered upstreams.
* Merge service/proxy defaults in cfg resolver
Previously the mesh gateway mode for connect proxies would be
merged at three points:
1. On servers, in ComputeResolvedServiceConfig.
2. On clients, in MergeServiceConfig.
3. On clients, in proxycfg/xds.
The first merge returns a ServiceConfigResponse where there is a
top-level MeshGateway config from proxy/service-defaults, along with
per-upstream config.
The second merge combines per-upstream config specified at the service
instance with per-upstream config specified centrally.
The third merge combines the NodeService.Proxy.MeshGateway
config containing proxy/service-defaults data with the per-upstream
mode. This third merge is easy to miss, which led to peered upstreams
not considering the mesh gateway mode from proxy-defaults.
This commit removes the third merge, and ensures that all mesh gateway
config is available at the upstream. This way proxycfg/xds do not need
to do additional overlays.
* Ensure that proxy-defaults is considered in wc
Upstream defaults become a synthetic Upstream definition under a
wildcard key "*". Now that proxycfg/xds expect Upstream definitions to
have the final MeshGateway values, this commit ensures that values from
proxy-defaults/service-defaults are the default for this synthetic
upstream.
* Add changelog.
Co-authored-by: freddygv <freddy@hashicorp.com>
* draft commit
* add changelog, update test
* remove extra param
* fix test
* update type to account for nil value
* add test for custom passive health check
* update comments and tests
* update description in docs
* fix missing commas
* Avoid logging StreamSecretID
* Wrap additional errors in stream handler
* Fix flakiness in leader test and rename servers for clarity. There was
a race condition where the peering was being deleted in the test
before the stream was active. Now the test waits for the stream to be
connected on both sides before deleting the associated peering.
* Run flaky test serially
Improves tests from #12362
These tests try to setup the following concurrent scenario:
1. (goroutine 1) execute read RPC with index=0
2. (goroutine 1) get response from (1) @ index=10
3. (goroutine 1) execute read RPC with index=10 and block
4. (goroutine 2) WHILE (3) is blocking, start slamming the system with stray writes that will cause the WatchSet to wakeup
5. (goroutine 2) after doing all writes, shut down the reader above
6. (goroutine 1) stops reading, double checks that it only ever woke up once (from 1)
Starting from and extending the mechanism introduced in #12110 we can specially handle the 3 main special Consul RPC endpoints that react to many config entries in a single blocking query in Connect:
- `DiscoveryChain.Get`
- `ConfigEntry.ResolveServiceConfig`
- `Intentions.Match`
All of these will internally watch for many config entries, and at least one of those will likely be not found in any given query. Because these are blends of multiple reads the exact solution from #12110 isn't perfectly aligned, but we can tweak the approach slightly and regain the utility of that mechanism.
### No Config Entries Found
In this case, despite looking for many config entries none may be found at all. Unlike #12110 in this scenario we do not return an empty reply to the caller, but instead synthesize a struct from default values to return. This can be handled nearly identically to #12110 with the first 1-2 replies being non-empty payloads followed by the standard spurious wakeup suppression mechanism from #12110.
### No Change Since Last Wakeup
Once a blocking query loop on the server has completed and slept at least once, there is a further optimization we can make here to detect if any of the config entries that were present at specific versions for the prior execution of the loop are identical for the loop we just woke up for. In that scenario we can return a slightly different internal sentinel error and basically externally handle it similar to #12110.
This would mean that even if 20 discovery chain read RPC handling goroutines wakeup due to the creation of an unrelated config entry, the only ones that will terminate and reply with a blob of data are those that genuinely have new data to report.
### Extra Endpoints
Since this pattern is pretty reusable, other key config-entry-adjacent endpoints used by `agent/proxycfg` also were updated:
- `ConfigEntry.List`
- `Internal.IntentionUpstreams` (tproxy)
By using the query results as state.
Blocking queries are efficient when the query matches some results,
because the ModifyIndex of those results, returned as queryMeta.Mindex,
will never change unless the items themselves change.
Blocking queries for non-existent items are not efficient because the
queryMeta.Index can (and often does) change when other entities are
written.
This commit reduces the churn of these queries by using a different
comparison for "has changed". Instead of using the modified index, we
use the existence of the results. If the previous result was "not found"
and the new result is still "not found", we know we can ignore the
modified index and continue to block.
This is done by setting the minQueryIndex to the returned
queryMeta.Index, which prevents the query from returning before a state
change is observed.
This test shows how blocking queries are not efficient when the query
returns no results. The test fails with 100+ calls instead of the
expected 2.
This test is still a bit flaky because it depends on the timing of the
writes. It can sometimes return 3 calls.
A future commit should fix this and make blocking queries even more
optimal for not-found results.
This will both save on unnecessary raft operations as well as
unnecessarily incrementing the raft modify index of config entries
subject to no-op updates.
This commit syncs ENT changes to the OSS repo.
Original commit details in ENT:
```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date: Thu Feb 10 10:23:33 2022 -0800
Vendor fork net rpc (#1538)
* replace net/rpc w consul-net-rpc/net/rpc
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* replace msgpackrpc and go-msgpack with fork from mono repo
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* gofmt all files touched
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
There are two restrictions:
- Writes from the primary DC which explicitly target a secondary DC.
- Writes to a secondary DC that do not explicitly target the primary DC.
The first restriction is because the config entry is not supported in
secondary datacenters.
The second restriction is to prevent the scenario where a user writes
the config entry to a secondary DC, the write gets forwarded to the
primary, but then the config entry does not apply in the secondary.
This makes the scope more explicit.
This field has been unnecessary for a while now. It was always set to the same value
as PrimaryDatacenter. So we can remove the duplicate field and use PrimaryDatacenter
directly.
This change was made by GoLand refactor, which did most of the work for me.
The prior solution to call reply.Reset() aged poorly since newer fields
were added to the reply, but not added to Reset() leading serial
blocking query loops on the server to blend replies.
This could manifest as a service-defaults protocol change from
default=>http not reverting back to default after the config entry
reponsible was deleted.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
This is needed in case the client proxy is in TransparentProxy mode.
Typically they won't have explicit configuration for every upstream, so
this ensures the settings can be applied to all of them when generating
xDS config.
ResolveServiceConfig is called by service manager before the proxy
registration is in the catalog. Therefore we should pass proxy
registration flags in the request rather than trying to fetch
them from the state store (where they may not exist yet).
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
Derek Menteer