1724b9a6be
Adds a magic "self" node name to distance queries.
2015-10-23 15:23:01 -07:00
59b710894d
Adds tests for HTTP interface. Removes a stray mark.
2015-10-23 15:23:01 -07:00
b63909cf67
Adds coordinate sorting support to catalog queries for nodes and service nodes.
2015-10-23 15:23:01 -07:00
d7bac0e808
Turns down the coordinate sync rate a bit more.
2015-10-23 15:23:01 -07:00
9ba9a708f6
Scales coordinate sends to hit a fixed aggregate rate across the cluster.
2015-10-23 15:23:01 -07:00
d8b8a3719f
Simplifies the batching function and adds some comments.
2015-10-23 15:23:01 -07:00
f71c79c53f
Does some small cleanups based on PR feedback.
...
* Holds coordinate updates in map and gets rid of the update channel.
* Cleans up config variables a bit.
2015-10-23 15:23:01 -07:00
1222772452
Hardens Consul from bad coordinates from other nodes.
2015-10-23 15:23:01 -07:00
acb0dce829
Moves batching down into the state store and changes it to fail-fast.
...
* A batch of updates is done all in a single transaction.
* We no longer need to get an update to kick things, there's a periodic flush.
* If incoming updates overwhelm the configured flush rate they will be dumped with an error.
2015-10-23 15:23:01 -07:00
b6c31bdf2f
Flips the sense of the coordinate enable option.
2015-10-23 15:23:01 -07:00
9c069c5031
Removes one more WAN leftover.
2015-10-23 15:23:01 -07:00
edb9a119e2
Does a clean up pass on the Consul side.
2015-10-23 15:23:01 -07:00
ac4185b888
Merges config changes after rebase.
2015-10-23 15:23:01 -07:00
139c9240ea
Address comments
2015-10-23 15:23:01 -07:00
840474f170
Add a test case
2015-10-23 15:23:01 -07:00
23c08aeeb4
Use IndexedCoordinate instead
2015-10-23 15:23:01 -07:00
530e73212a
Some fixes
2015-10-23 15:23:01 -07:00
2ef802b8b3
Fix a comment
2015-10-23 15:23:01 -07:00
b2cff43bb5
Complete logic for sending coordinates
2015-10-23 15:23:01 -07:00
66b210afcb
Some fixes
2015-10-23 15:23:01 -07:00
b5bbe2bcfa
Adding tests and stuff
2015-10-23 15:23:01 -07:00
d035dbd43b
Merge pull request #1318 from daveadams/f-http-header-token
...
Allow specifying Consul token in an HTTP request header
2015-10-22 13:33:47 -07:00
9267f956a2
Update cleanhttp repo location
2015-10-22 14:14:22 -04:00
06bb9d5f36
Use cleanhttp to get rid of DefaultTransport
2015-10-22 10:47:50 -04:00
5f175add40
Add HTTP request header X-Consul-Token
...
Add support for an X-Consul-Token HTTP request header to specify the
token with which this request should be fulfilled. The header would have
precedence over the responding Agent's default token, but would have
lower precedence than a token specified in the query string.
2015-10-19 11:26:01 -05:00
263c7e3fd3
Deletes the old state store and all its accoutrements.
2015-10-15 14:59:09 -07:00
bcdabe4606
Knocks out the Raft indexes before doing compare.
2015-10-15 14:59:09 -07:00
cbcd977a39
Gets new structs changes to compile, adds some corner case handling and extra unit tests.
2015-10-15 14:59:09 -07:00
b46f878747
Merge pull request #1309 from hashicorp/f-remove-migrate
...
Removes consul-migrate for 0.6
2015-10-15 14:50:19 -07:00
9cddc187b5
Don't use http.DefaultClient
...
Two of the changes are in tests; the one of consequence is in the API.
As explained in #1308 this can cause conflicts with downstream programs.
Fixes #1308 .
2015-10-15 17:49:35 -04:00
aba1b26015
agent: consolidates data dir checker
2015-10-15 14:21:35 -07:00
8bc51eb237
agent: test mdb dir protection
2015-10-15 14:15:41 -07:00
2a7609d6bc
agent: remove migrator, refuse to start if mdb dir found
2015-10-15 14:15:08 -07:00
0b77960349
agent: remove an N^2 check. See #1265
2015-10-12 20:30:11 -07:00
a94589ad67
Add http method to log output
2015-10-02 18:33:06 -07:00
26eadcd95c
Merge pull request #1235 from wuub/master
...
fix conflict between handleReload and antiEntropy critical sections
2015-09-17 07:28:39 -07:00
9a1b52171f
panic when unbalanced localState.Resume() is detected
2015-09-17 11:32:08 +02:00
c5168e1263
Fix a bunch of typos.
2015-09-15 13:22:08 +01:00
b25797a808
Merge pull request #1187 from sfncook/enable_tag_drift_03
...
Enable tag drift 03
2015-09-11 15:35:32 -07:00
8d733b7fca
remove various typos
2015-09-11 12:29:54 -07:00
4cd1b09ad7
make Pause()/Resume()/isPaused() behave more like a semaphore
...
see: https://github.com/hashicorp/consul/issues/1173 #1173
Reasoning: somewhere during consul development Pause()/Resume() and
PauseSync()/ResumeSync() were added to protect larger changes to
agent's localState. A few of the places that it tries to protect are:
- (a *Agent) AddService(...) # part of the method
- (c *Command) handleReload(...) # almost the whole method
- (l *localState) antiEntropy(...)# isPaused() prevents syncChanges()
The main problem is, that in the middle of handleReload(...)'s
critical section it indirectly (loadServices()) calls AddService(...).
AddService() in turn calls Pause() to protect itself against
syncChanges(). At the end of AddService() a defered call to Resume() is
made.
With the current implementation, this releases
isPaused() "lock" in the middle of handleReload() allowing antiEntropy
to kick in while configuration reload is still in progress.
Specifically almost all services and probably all check are unloaded
when syncChanges() is allowed to run.
This in turn can causes massive service/check de-/re-registration,
and since checks are by default registered in the critical state,
a majority of services on a node can be marked as failing.
It's made worse with automation, often calling `consul reload` in close
proximity on many nodes in the cluster.
This change basically turns Pause()/Resume() into P()/V() of
a garden-variety semaphore. Allowing Pause() to be called multiple times,
and releasing isPaused() only after all matching/defered Resumes() are
called as well.
TODO/NOTE: as with many semaphore implementations, it might be reasonable
to panic() if l.paused ever becomes negative.
2015-09-11 18:28:06 +02:00
24ac26b3c1
failing test showing that nested Pause()/Resume() release too early
...
see: #1173 / https://github.com/hashicorp/consul/issues/1173
2015-09-11 17:52:57 +02:00
99be758411
Rename EnableTagOverride and update formatting
2015-09-11 08:35:29 -07:00
f448a62826
Remove debug lines
2015-09-11 08:32:59 -07:00
2f04917261
Merge remote-tracking branch 'hashicorp/master' into enable_tag_drift_03
2015-09-10 14:55:30 -07:00
d00889c3a4
Adds missing token to maint unit test.
2015-09-10 14:53:00 -07:00
8a86eee9fb
Add test cases TestAgentAntiEntropy_EnableTagDrift
2015-09-10 14:08:16 -07:00
08d12e978f
Merge pull request #1230 from hashicorp/f-maintfix
...
Respect tokens in maintenance mode
2015-09-10 12:30:07 -07:00
948bd57d6a
agent: testing node/service maintenance using tokens
2015-09-10 12:08:08 -07:00
e129a59316
agent: thread tokens through for maintenance mode
2015-09-10 11:43:59 -07:00
3d7c3725d8
Allow AAAA queries for nodeLookup
2015-09-08 16:54:36 +02:00
d63749b30e
Merge pull request #1217 from 42wim/fix-rfc2308-part3
...
No NXDOMAIN when the answer is empty
2015-09-04 10:42:38 -04:00
56efa4958b
Merge pull request #1214 from zendesk/fix_lock_race_2
...
lock.go: fix another race condition
2015-09-02 16:04:55 -07:00
2336c6a4bd
No NXDOMAIN when the answer is empty
2015-09-02 16:12:22 +02:00
a013095f62
Merge pull request #1167 from railsguru/master
...
Add -http-port option to change the HTTP API port
2015-09-02 01:15:55 -04:00
655666170a
agent: Always enable the UI endpoints
2015-09-01 18:28:32 -07:00
01ec256c7e
lock.go: fix another race condition
...
The previous fix to `consul lock` (commit 6875e8d) didn't completely
eliminate the race that could occur if the lock was acquired around the
same time SIGTERM was received: It was still possible for
Run() to spawn the process via startChild() after killChild() had
released the shared mutex.
Now, when SIGTERM is received, we acquire a mutex that prevents
spawning a new process and never release it.
We've tested this fix pretty thoroughly and believe it completely
resolves the issue.
2015-09-01 14:27:23 -07:00
e97973c1e1
Limit the DNS responses after getting the NodeRecords
2015-09-01 23:23:05 +02:00
56d2fa4c17
Merge pull request #1195 from 42wim/fix-rfc2308-part2
...
Return SOA/NXDOMAIN when the answer is empty
2015-09-01 17:08:31 -04:00
b806aceef4
Return SOA/not found when the answer is empty
2015-09-01 22:28:12 +02:00
0f49e1c3a9
Merge pull request #1200 from ryotarai/lock-pass-stdin
...
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-31 21:14:45 -07:00
d6b71de3f4
agent: reload SCADA client if endpoint changes
2015-08-27 13:29:07 -07:00
5bd7a5f239
command: atlas endpoint can be passed
2015-08-27 11:11:05 -07:00
cda2bf6975
agent: atlas_endpoint is configurable
2015-08-27 11:08:01 -07:00
c45f2971e7
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-26 16:27:21 +09:00
00d78963bf
agent: log a message when making a new scada connection
2015-08-25 21:03:16 -07:00
33cadcf925
agent: don't reload scada client if there is no config change
2015-08-25 20:43:57 -07:00
8eea77d58f
agent: testing scada client creation in command
2015-08-25 20:22:22 -07:00
495cc41ba4
agent: test scada HTTP server creation
2015-08-25 18:51:04 -07:00
e3cd2f2c0d
agent: clean up scada connection manager
2015-08-25 18:27:07 -07:00
bc96c14a6f
agent: document the scada http creation func
2015-08-25 17:19:11 -07:00
1378fd93b0
agent: scada client and HTTP server are tracked separately
2015-08-25 16:59:53 -07:00
325b54649a
Remove duplicate code
2015-08-20 20:46:20 +02:00
3d133ab78c
Use Ports.HTTP directly
2015-08-20 20:27:20 +02:00
7e2ecf6a3c
Add documentation for http-port option
2015-08-20 20:19:35 +02:00
d4ec6aa630
Update tests - NodeService init needs bool
2015-08-20 09:09:26 -07:00
854ff1eb41
Add EnableTagDrift logic to command/agent/local.go
2015-08-18 14:03:48 -07:00
3a740ac07b
Remove from command/agent/config_test.go
2015-08-18 10:42:25 -07:00
f6814c89ed
EnableTagDrift in NodeService struct
2015-08-18 10:34:55 -07:00
5024e7c3c7
Merge pull request #1166 from hashicorp/f-dns-log
...
Log network address of DNS clients
2015-08-13 18:32:32 -07:00
07299a61dc
agent: log network address of DNS clients
2015-08-11 10:33:27 -07:00
7a3da7db26
Add -http-port option to change the HTTP API port
...
This is useful when pushing consul to PaaS like
Cloud Foundry making the HTTP API easily routable.
2015-08-11 14:14:21 +02:00
c2a865686c
Merge pull request #1158 from mfischer-zd/fix_1155
...
lock.go: fix race condition
2015-08-05 14:56:13 -07:00
9e0e9e389d
lock.go: fix race condition
...
Fix a race condition between startChild() and killChild() that could
lead to an orphaned managed process.
Fixes #1155
2015-08-05 09:06:51 -07:00
f95ba4b8eb
Remove trailing slash from lock
...
Lock command will remove trailing slash from path (as it is invalid).
Fixes #1136 .
2015-07-30 12:14:17 -05:00
b13ba78651
Merge pull request #1143 from hashicorp/GH-1142
...
Check NXDOMAIN after filtering nodes
2015-07-29 18:56:08 -04:00
20f17a0cc8
Test for GH-1142.
2015-07-29 18:21:16 -04:00
0a853bca2e
Merge pull request #1137 from 42wim/fix-1124
...
Recurse when PTR answer is empty
2015-07-29 14:39:04 -07:00
dbb5ad1316
Check NXDOMAIN after filtering nodes
...
Move the check for NXDOMAIN below the service health filter.
2015-07-29 17:16:48 -04:00
6e38497ce9
Merge pull request #1141 from hashicorp/f-travis
...
Try moving to newer Travis-CI infrastructure
2015-07-28 10:42:56 -07:00
f48bc65e62
travis-ci: skip syslog tests for container-based travis infra
2015-07-28 09:58:43 -07:00
a6734ab4b8
Recurse when PTR answer is empty
2015-07-27 23:22:36 +02:00
2017c95d13
Merge pull request #1130 from pdf/check_socket
...
Add Socket check type
2015-07-27 14:21:24 -07:00
6d38027689
Merge pull request #1090 from hashicorp/f-keyring-acl
...
Keyring ACLs
2015-07-24 10:23:18 -07:00
86edd7169c
Add TCP check type
...
Adds the ability to simply check whether a TCP socket accepts
connections to determine if it is healthy. This is a light-weight -
though less comprehensive than scripting - method of checking network
service health.
The check parameter `tcp` should be set to the `address:port`
combination for the service to be tested. Supports both IPv6 and IPv4,
in the case of a hostname that resolves to both, connections will be
attempted via both protocol versions, with the first successful
connection returning a successful check result.
Example check:
```json
{
"check": {
"id": "ssh",
"name": "SSH (TCP)",
"tcp": "example.com:22",
"interval": "10s"
}
}
```
2015-07-24 14:06:05 +10:00
a339ca19a6
agent: disable ACLs for RPC client tests
2015-07-23 17:09:33 -07:00
6f42f6640c
command/lock: Check for shutdown during lock acquisition. Fixes #800
2015-07-22 16:07:44 -07:00
eece6e4848
Return every time lock acquisition fails
2015-07-22 10:44:47 -07:00
f424f94d45
agent: vet fixes
2015-07-14 11:42:51 -07:00
8e834ba976
Merge pull request #995 from 42wim/rfc2308-soa-ttl
...
Send SOA with negative responses (RFC2308)
2015-07-13 08:49:25 -07:00
James Phillips