Commit Graph

8 Commits

Author SHA1 Message Date
John Cowen ca04a62702
ui: Change the URL prefix of partitions from `-` to `_` (#11801) 2021-12-13 15:39:56 +00:00
John Cowen 3d1b859533
ui: Support for SSO with Admin Partitions (#11604)
* Upgrade AuthForm and document current state a little better
* Hoist SSO out of the AuthForm
* Bare minimum admin partitioned SSO

also:

ui: Tabbed Login with Token or SSO interface (#11619)

- I upgraded our super old, almost the first ember component I wrote, to use glimmer/almost template only. This should use slots/contextual components somehow, but thats a bigger upgrade so I didn't go that far.
- I've been wanting to upgrade the shape of our StateChart component for a very long while now, here its very apparent that it would be much better to do this sooner rather than later. I left it as is for now, but there will be a PR coming soon with a slight reshaping of this component.
- Added a did-upsert modifier which is a mix of did-insert/did-update
- Documentation added/amended for all the new things.
2021-11-24 14:53:12 +00:00
John Cowen 6e23f5a14c
ui: When certain menus are selected reset either nspace/partition (#11479)
For our dc, nspace and partition 'bucket' menus, sometimes when selecting one 'bucket' we need to reset a different 'bucket' back to the one that your token has by default (or the default if not). For example when switching to a different partition whilst you are in a non-default namespace of another partition, we need to switch you to the token default namespace of the partition you are switching to.
2021-11-17 15:59:26 +00:00
John Cowen 93b78aee53
ui: Adds initial CRUD for partitions (#11188)
* Add `is` and `test` helpers in a similar vein to `can`

Adds 2 new helpers in a similar vein to ember-cans can:

- `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability.
- `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined.

* Adds TextInput component + related modifiers/helpers/machines/services (#11189)

Adds a few new components/modifiers/helpers to aid building forms.

- state-chart helper, used in lieu of a more generic approach for requiring our statecharts.
- A few modifications to our existing disabled modifier.
- A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this.
- A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date.

Documentation is included for all of ^

* ui: Adds initial CRUD for partitions (#11190)

Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application.

New components:

- Consul::Partition::Form
- Consul::Partition::List
- Consul::Partition::Notifications
- Consul::Partition::SearchBar
- Consul::Partition::Selector

See additional documentation here for more details

New Route templates:

- index.hbs partition listing/searching/filtering
- edit.hbs partition editing and creation

Additionally:

There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site.

Our softDelete functionality has been DRYed out a little to be used across two repos.

isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components.

* ui: Exclude all debug-like files from the build (#11211)

This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
2021-10-08 16:29:30 +01:00
John Cowen eeb04ae436
ui: Partitions Application Layer (#11017)
* Add Partition to all our models

* Add partitions into our serializers/fingerprinting

* Make some amends to a few adapters ready for partitions

* Amend blueprints to avoid linting error

* Update all  our repositories to include partitions, also

Remove enabled/disable nspace repo and just use a nspace with
conditionals

* Ensure nspace and parition parameters always return '' no matter what

* Ensure data-sink finds the model properly

This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more

* Add all the new partition data layer

* Add a way to set the title of the page from inside the route

and make it accessibile via a route announcer

* Make the Consul Route the default/basic one

* Tweak nspace and partition abilities not to check the length

* Thread partition through all the components that need it

* Some ACL tweaks

* Move the entire app to use partitions

* Delete all the tests we no longer need

* Update some Unit tests to use partition

* Fix up KV title tests

* Fix up a few more acceptance tests

* Fixup and temporarily ignore some acceptance tests

* Stop using ember-cli-page-objects fillable as it doesn't seem to work

* Fix lint error

* Remove old ACL related test

* Add a tick after filling out forms

* Fix token warning modal

* Found some more places where we need a partition var

* Fixup some more acceptance tests

* Tokens still needs a repo service for CRUD

* Remove acceptance tests we no longer need

* Fixup and "FIXME ignore" a few tests

* Remove an s

* Disable blocking queries for KV to revert to previous release for now

* Fixup adapter tests to follow async/function resolving interface

* Fixup all the serializer integration tests

* Fixup service/repo integration tests

* Fixup deleting acceptance test

* Fixup some ent tests

* Make sure nspaces passes the dc through for when thats important

* ...aaaand acceptance nspaces with the extra dc param
2021-09-15 19:50:11 +01:00
John Cowen a509655d0b
ui: Adds Partitions to the HTTP layer (#10447)
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.

The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.

Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.

Notes:

Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 18:09:55 +01:00
John Cowen 398db1339b
ui: [BUGFIX] Ensure in-folder KVs are created in the correct folder (#10569)
When clicking to create a KV within folder name, would would be viewing a form that was a form for creating a KV in the root, which when the user clicked to save, saved the KV in the root.

For the moment at least I've removed the code that strips double slashes, and whilst this isn't ideal, it looks like we've picked up one of those bugs that turns into a 'feature', and completely reworking KV to not rely on the double slashes is not really an option right now.
2021-07-14 18:49:01 +01:00
John Cowen 7083c39b96
ui: Support Route optional parameters/segments (#10212)
Moves our URLs with 'optional namespace segment' into a separately abstracted 'optional URL segment' feature
2021-05-26 17:43:46 +01:00