This sounds a bit 'backwards' as the end goal here is to add an improved UX to partitions, not namespaces. The reason for doing it this way is that Namespaces already has a type of 'improved UX' CRUD in that it has one to many relationship in the form when saving your namespaces (the end goal for partitions). In moving Namespaces to use the same approach as partitions we:
- Ensure the new approach works with one-to-many forms.
- Test the new approach without writing a single test (we already have a bunch of tests for namespaces which are now testing the approach used by both namespaces and partitions)
Additionally:
- Fixes issue with missing default nspace in the nspace selector
- In doing when checking to see that things where consistent between the two, I found a few little minor problems with the Admin Partition CRUD so fixed those up here also.
- Removed the old style Nspace notifications
- Moves where they appear up to the <App /> component.
- Instead of a <Notification /> wrapping component to move whatever you use for a notification up to where they need to appear (via ember-cli-flash), we now use a {{notification}} modifier now we have modifiers.
- Global notifications/flashes are no longer special styles of their own. You just use the {{notification}} modifier to hoist whatever component/element you want up to the top of the page. This means we can re-use our existing <Notice /> component for all our global UI notifications (this is the user visible change here)
* Upgrade AuthForm and document current state a little better
* Hoist SSO out of the AuthForm
* Bare minimum admin partitioned SSO
also:
ui: Tabbed Login with Token or SSO interface (#11619)
- I upgraded our super old, almost the first ember component I wrote, to use glimmer/almost template only. This should use slots/contextual components somehow, but thats a bigger upgrade so I didn't go that far.
- I've been wanting to upgrade the shape of our StateChart component for a very long while now, here its very apparent that it would be much better to do this sooner rather than later. I left it as is for now, but there will be a PR coming soon with a slight reshaping of this component.
- Added a did-upsert modifier which is a mix of did-insert/did-update
- Documentation added/amended for all the new things.
Temporarily revert to pre-1.10 UI functionality by overwriting frontend
permissions. These are used to hide certain UI elements, but they are
still enforced on the backend.
This temporary measure should be removed again once https://github.com/hashicorp/consul/issues/11098
has been resolved
Port of: Ensure we check intention service prefix permissions for per service (#11270)
Previously, when showing some action buttons for 'per service intentions' we used a global 'can I do something with any intention' permission to decide whether to show a certain button or not. If a user has a token that does not have 'global' intention permissions, but does have intention permissions on one or more specific services (for example via service / service_prefix), this meant that we did not show them certain buttons required to create/edit the intentions for this specific service.
This PR adds that extra permissions check so we now check the intentions permissions per service instead of using the 'global' "can I edit intentions" question/request.
**Notes:**
- If a HTML button is `disabled` this means tippy.js doesn't adopt the
popover properly and subsequently hide it from the user, so aswell as
just disabling the button so you can't active the popover, we also don't
even put the popover on the page
- If `ability.item` or `ability.item.Resources` are empty then assume no access
**We don't try to disable service > right hand side intention actions here**
Whether you can create intentions for a service depends on the
_destination_ of the intention you would like to create. For the
topology view going from the LHS to the center, this is straightforwards
as we only need to know the permissions for the central service, as when
you are going from the LHS to the center, the center is the
_destination_.
When going from the center to the RHS the _destination[s]_ are on the
RHS. This means we need to know the permissions for potentially 1000s of
services all in one go in order to know when to show a button or not.
We can't realistically discover the permissions for service > RHS
services as we'd have either make a HTTP request per right hand service,
or potentially make an incredibly large POST request for all the
potentially 1000s of services on the right hand side (more preferable to
1000s of HTTP requests).
Therefore for the moment at least we keep the old functionality (thin client)
for the middle to RHS here. If you do go to click on the button and you
don't have permissions to update the intention you will still not be
able to update it, only you won't know this until you click the button
(at which point you'll get a UI visible 403 error)
Note: We reversed the conditional here between 1.10 and 1.11
So this make 100% sense that the port is different here to 1.11
* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
This commit tries to make the development experience of working on our OIDC support a little more realistic, essentially by creating our own OIDC provider in our application (only during development builds). You can still provide a real OIDC provider to work with via our dev time environment/cookie variables as before, just now we default to the behaviour in this commit. Overall this makes it much easier to verify our OIDC support in the UI, and also opens up avenues for us to be able to test more scenarios that we couldn't before (for example not only successful logins, but also erroneous, potentially with multiple error reasons).
* Add `is` and `test` helpers in a similar vein to `can`
Adds 2 new helpers in a similar vein to ember-cans can:
- `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability.
- `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined.
* Adds TextInput component + related modifiers/helpers/machines/services (#11189)
Adds a few new components/modifiers/helpers to aid building forms.
- state-chart helper, used in lieu of a more generic approach for requiring our statecharts.
- A few modifications to our existing disabled modifier.
- A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this.
- A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date.
Documentation is included for all of ^
* ui: Adds initial CRUD for partitions (#11190)
Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application.
New components:
- Consul::Partition::Form
- Consul::Partition::List
- Consul::Partition::Notifications
- Consul::Partition::SearchBar
- Consul::Partition::Selector
See additional documentation here for more details
New Route templates:
- index.hbs partition listing/searching/filtering
- edit.hbs partition editing and creation
Additionally:
There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site.
Our softDelete functionality has been DRYed out a little to be used across two repos.
isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components.
* ui: Exclude all debug-like files from the build (#11211)
This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
> In the future, this should all be moved to each individual repository now, which will mean we can finally get rid of this service.
This PR moves reconciliation to 'each individual repository'. I stopped short of getting rid of the service, but its so small now we pretty much don't need it. I'd rather wait until I look at the equivalent DataSink service and see if we can get rid of both equivalent services together (this also currently dependant on work soon to be merged)
Reconciliation of models (basically doing the extra work to clean up the ember-data store and bring our frontend 'truth' into line with the actual backend truth) when blocking/long-polling on different views/filters of data is slightly more complicated due to figuring out what should be cleaned up and what should be left in the store. This is especially apparent for KVs.
I built in a such a way to hopefully make sure it will all make sense for the future. I also checked that this all worked nicely with all our models, even KV which has never supported blocking queries. I left all that work in so that if we want to enable blocking queries/live updates for KV it now just involves deleting a couple of lines of code.
There is a tonne of old stuff that we can clean up here now (our 'fake headers' that we pass around) and I've added that to my list of thing for a 'Big Cleanup PR' that will remove lots of code that we no longer require.
This commit addresses some left over admin partition FIXMEs
1. Adds Partition correctly to Service Instances
2. Converts non-important 'we can do this later' FIXMEs to TODOs
3. Removes some FIXMEs that I've double checked and addressed.
Most of the remaining FIXMEs I'm waiting on responses to questions from
the consul core folks for. I'll address those in a separate PR.
Our DataSource came in very iteratively, when we first started using it we specifically tried not to use it for things that would require portions of the @src="" attribute to be URL encoded (so things like service names couldn't be used, but dc etc would be fine). We then gradually added an easy way to url encode the @src="" attributes with a uri helper and began to use the DataSource component more and more. This meant that some DataSource usage continued to be used without our uri helper.
Recently we hit #10901 which was a direct result of us not encoding @src values/URIs (I didn't realise this was one of the places that required URL encoding) and not going back over things to finish things off once we had implemented our uri helper, resulting in ~half of the codebase using it and ~half of it not.
Now that almost all of the UI uses our DataSource component, this PR makes it even harder to not use the uri helper, by wrapping the string that it requires in a private URI class/object, that is then expected/asserted within the DataSource component/service. This means that as a result of this PR you cannot pass a plain string to the DataSource component without seeing an error in your JS console, which in turn means you have to use the uri helper, and it's very very hard to not URL encode any dynamic/user provided values, which otherwise could lead to bugs/errors similar to the one mentioned above.
The error that you see when you don't use the uri helper is currently a 'soft' dev time only error, but like our other functionality that produces a soft error when you mistakenly pass an undefined value to a uri, at some point soon we will make these hard failing "do not do this" errors.
Both of these 'soft error' DX features have been used this to great effect to implement our Admin Partition feature and these kind of things will minimize the amount of these types of bugs moving forwards in a preventative rather than curative manner. Hopefully these are the some of the kinds of things that get added to our codebase that prevent a multitude of problems and therefore are often never noticed/appreciated.
Additionally here we moved the remaining non-uri using DataSources to use uri (that were now super easy to find), and also fixed up a place where I noticed (due to the soft errors) where we were sometimes passing undefined values to a uri call.
The work here also led me to find another couple of non-important 'bugs' that I've PRed already separately, one of which is yet to be merged (#11105), hence the currently failing tests here. I'll rebase that once that PR is in and the tests here should then pass 🤞
Lastly, I didn't go the whole hog here to make DataSink also be this strict with its uri usage, there is a tiny bit more work on DataSink as a result of recently work, so I may (or may not) make DataSink equally as strict as part of that work in a separate PR.
* ui: Gracefully recover from non-existent DC errors
This PR fixes what happens in the UI if you try to navigate to a non-existing DC.
When we received a 500 error from an API response due to a non-existent DC, previously we would show a 404 error, which is what we were trying to convey. But in the spirit of the UI being a 'thin client', its probably best to just show the 500 error from the API response, which may help folks to debug any issues better.
* Automatically set the CONSUL_DATACENTER_LOCAL env var for testing
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.
The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.
Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.
Notes:
Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
This commit fixes 2 problems with our OIDC flow in the UI, the first is straightforwards, the second is relatively more in depth:
1: A typo (1.10.1 only)
During #10503 we injected our settings service into the our oidc-provider service, there are some comments in the PR as to the whys and wherefores for this change (https://github.com/hashicorp/consul/pull/10503/files#diff-aa2ffda6d0a966ba631c079fa3a5f60a2a1bdc7eed5b3a98ee7b5b682f1cb4c3R28)
Fixing the typo so it was no longer looking for an unknown service (repository/settings > settings)
fixed this.
2: URL encoding (1.9.x, 1.10.x)
TL;DR: /oidc/authorize/provider/with/slashes/code/with/slashes/status/with/slashes should be /oidc/authorize/provider%2Fwith%2Fslashes/code%2Fwith%2Fslashes/status%2Fwith%2Fslashes
When we receive our authorization response back from the OIDC 3rd party, we POST the code and status data from that response back to consul via acallback as part of the OIDC flow. From what I remember back when this feature was originally added, the method is a POST request to avoid folks putting secret-like things into API requests/URLs/query params that are more likely to be visible to the human eye, and POSTing is expected behaviour.
Additionally, in the UI we identify all external resources using unique resource identifiers. Our OIDC flow uses these resources and their identifiers to perform the OIDC flow using a declarative state machine. If any information in these identifiers uses non-URL-safe characters then these characters require URL encoding and we added a helper a while back to specifically help us to do this once we started using this for things that required URL encoding.
The final fix here make sure that we URL encode code and status before using them with one of our unique resource identifiers, just like we do with the majority of other places where we use these identifiers.
The default namespace, and the tokens default namespace (or its origin namespace) is slightly more complicated than other things we deal with in the UI, there's plenty of info/docs on this that I've added in this PR.
Previously:
When a namespace was not specified in the URL, we used to default to the default namespace. When you logged in using a token we automatically forward you the namespace URL that your token originates from, so you are then using the namespace for your token by default. You can of course then edit the URL to remove the namespace portion, or perhaps revisit the UI at the root path with you token already set. In these latter cases we would show you information from the default namespace. So if you had no namespace segment/portion in the URL, we would assume default, perform actions against the default namespace and highlight the default namespace in the namespace selector menu. If you wanted to perform actions in your tokens origin namespace you would have to manually select it from the namespace selector menu.
This PR:
Now, when you have no namespace segment/portion in the URL, we use the token's origin namespace instead (and if you don't have a token, we then use the default namespace like it was previously)
Notes/thoughts:
I originally thought we were showing an incorrectly selected namespace in the namespace selector, but it also matched up with what we were doing with the API, so it was in fact correct. The issue was more that we weren't selecting the origin namespace of the token for the user when a namespace segment was omitted from the URL. Seeing as we automatically forward you to the tokens origin namespace when you log in, and we were correctly showing the namespace we were acting on when you had no namespace segment in the URL (in the previous case default), I'm not entirely sure how much of an issue this actually was.
This characteristic of namespace+token+namespace is a little weird and its easy to miss a subtlety or two so I tried to add some documentation in here for future me/someone else (including some in depth code comment around one of the API endpoints where this is very subtle and very hard to miss). I'm not the greatest at words, so would be great to get some edits there if it doesn't seem clear to folks.
The fact that we used to save your previous datacenter and namespace into local storage for reasons also meant the interaction here was slightly more complicated than it needed to be, so whilst we were here we rejigged things slightly to satisfy said reasons still but not use local storage (we try and grab the info from higher up). A lot of the related code here is from before we had our Routlets which I think could probably make all of this a lot less complicated, but I didn't want to do a wholesale replacement in this PR, we can save that for a separate PR on its own at some point.
The extra argument meant that the blocking query configuration wasn't
being read properly, and therefore the correct ?index wasn't being sent
with the request.
* Create BindingRule adapter and tests
* Create BindingRule serializer and test
* Create BindingRule model and repository
* Add binding-rules mock data
* Create binding-rules router and call endpoint
* Create Binding rules tab
* Create and use BindingView component
* Create empty state for BindingView
* Remove binding rule requestForQueryRecord endpoint and tests
* Update binding rules selector to be monospaced
* Add bind type tooltip
* Create and Tabular-dl styling component
* Update hr tag global styling
* Rename BindingView to BindingList and refactor
* Add translations for bind types tooltip info
* Remove unused endpoint
* Refactor based on review notes
* Add Routlet service and Route Component
* Add ember-assign-helper (already an indirect dependency)
* Use EventListeners for is-href instead of observing
* Don't include :active in '-intent' styles
We use a `<DataSource @src={{url}} />` component throughout our UI for when we want to load data from within our components. The URL specified as the `@src` is used to map/lookup what is used in to retrieve data, for example we mostly use our repository methods wrapped with our Promise backed `EventSource` implementation, but DataSource URLs can also be mapped to EventTarget backed `EventSource`s and native `EventSource`s or `WebSockets` if we ever need to use those (for example these are options for potential streaming support with the Consul backend).
The URL to function/method mapping previous to this PR used a very naive humongous `switch` statement which was a temporary 'this is fine for the moment' solution, although we'd always wanted to replace with something more manageable.
Here we add `wayfarer` as a dependency - a very small (1kb), very fast, radix trie based router, and use that to perform the URL to function/method mapping.
This essentially turns every `DataSource` into a very small SPA - change its URL and the view of data changes. When the data itself changes, either the yielded view of data changes or the `onchange` event is fired with the changed data, making the externally sourced view of data completely reactive.
```javascript
// use the new decorator a service somewhere to annotate/decorate
// a method with the URL that can be used to access this method
@dataSource('/:ns/:dc/services')
async findAllByDatacenter(params) {
// get the data
}
// can use with JS in a route somewhere
async model() {
return this.data.source(uri => uri`/${nspace}/${dc}/services`)
}
```
```hbs
{{!-- or just straight in a template using the component --}}
<DataSource @src="/default/dc1/services" @onchange="" />
```
This also uses a new `container` Service to automatically execute/import certain services yet not execute them. This new service also provides a lookup that supports both standard ember DI lookup plus Class based lookup or these specific services. Lastly we also provide another debug function called DataSourceRoutes() which can be called from console which gives you a list of URLs and their mappings.
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
* Create mock-api endpoints for auth-methods
* Implement auth-method endpoints and model with tests
* Create route and tab for auth-methods
* Create auth-method list and type components with styles
* Add JWT and OIDC svg logos to codebase
* Add brand translations
* Add SearchBar to Auth Methods
* Add acceptance test for Auth Methods UI
* Skip auth method repo test
* Changes from review notes
* Fixup auth-method modela and mock-data
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Skip repo test
* Fix to breaking serializer test
* Implement auth-method endpoints and model with tests
* Add acceptance test for Auth Methods UI
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Fix to breaking serializer test
* Update class for search
* Add auth-methods link to sidebar
* Fixup PR review notes
* Fixup review notes
* Only show OIDC filter with enterprise
* Update conditionals for MaxTokenTTL & TokenLocality
* Refactor
* Use NodeName not Node for cross checking proxies/instances
* Also copy over the meta data to keep the correct cursor/index
* When we sync checks to the ProxyInstance replace rather than accumulate
* CSS for moving from a horizontal main menu to a side/vertical one
* Add <App /> Component and rearrange <HashcorpConsul /> to use it
1. HashicorpConsul now uses <App />
2. <App /> is now translated and adds 'skip to main content' functionality
3. Adds ember-in-viewport addon in order to visibly hide main navigation
items in order to take them out of focus/tabbing
4. Slight amends to the dom service while I was there
* ui: Keep track of existing intentions and use those to save changes
Previously we risked overwriting existing data in an intention if we
tried to save an intention without having loaded it first, for example
Description and Metadata would have been overwritten.
This change loads in all the intentions for an origin service so we can
pick off the one we need to save and change to ensure that we don't
overwrite any existing data.
* Rename a model attr to not be overwritten by ember-data
* Make sure we can click on the instances
* Make sure we can click back to the preevious page, not root
* Add a forwards/back/forwards navigation test for service instances
* Rename a model attr to not be overwritten by ember-data
Co-authored-by: John Cowen <jcowen@hashicorp.com>
This PR adds the ns=* query parameter when namespaces are enabled to keep backwards compatibility with how the UI used to work (Intentions page always lists all intention across all namespace you have access to)
I found a tiny dev bug for printing out the current URL during acceptance testing and fixed that up while I was there.
Moves search things around to match an interface that can be switched in and out of fuzzy searching using fuse.js. We add both fuzzy searching and regex based searching to the codebase here, but it is not yet compiled in.
* Use DataLoader errors for Service Detail and Service Instance
* uiCfg > config use the repo-like async interface where possible
* Clean up node show
* Make sure you can put `=` in dev cookie values
* Never default to default
* Tweak chain variable
* Remove env service
* Pass chain through to the template for the tempalte to clean it up
* Delete controller tests
* Remove cleanup in Nodes show as this is still being used in another tab
* Use dc.Local
In order to test certain setups for our metrics visualizations we need to be able to setup several different `ui_config` settings during development/testing. Generally in the UI, we use the Web Inspector to set various cookie values to configure the UI how we need to see it whilst developing, so this PR:
1. Routes `ui_config` through a dev time only `CONSUL_UI_CONFIG` env variable so we can change it via cookies vars.
2. Adds `CONSUL_METRICS_PROXY_ENABLE`, `CONSUL_METRICS_PROVIDER` and `CONSUL_SERVICE_DASHBOARD_URL` so it's easy to set/unset these only values during development.
3. Adds an acceptance testing step so we can setup `ui_config` to whatever we want during testing.
4. Adds an async 'repository-like' method to the `UiConfig` Service so it feels like a repository - incase we ever need to get this via an HTTP API+blocking query.
5. Vaguely unrelated: we allow cookie values to be set via the location.hash whilst in development only e.g. `/ui/services#CONSUL_METRICS_PROXY_ENABLE=1` so we can link to different setups if we ever need to.
All values added here are empty/falsey by default, so in order to see how it was previously you'll need to set the appropriate cookies values, but you can now also easily preview/test the the metrics viz in different/disabled states (with differing `ui_config`)
* Add `Local` property to Datacenters
* If you have not previous datacenter, redirect the user to the local dc
* Add an `is-local` class to the local datacenter in the DC picker
* Switch upstream-instances to use new style of searchable
* Add search action to DataCollection plus basic README
* Use DataCollection for PowerSelect searching in child-selectors
* Remove old style filterable search for role/policies and instances
* Remove old helpers/components related to search/sort/filter
* Adds model layer changes around HealthChecks
1. Makes a HealthCheck model fragment and uses it in ServiceInstances and
Nodes
2. Manually adds a relationship between a ServiceInstance and its
potential ServiceInstanceProxy
3. Misc changes related to the above such as an Exposed property on
MeshChecks, MeshChecks itself
* Add a potential temporary endpoint to distinguish ProxyServiceInstance
* Fix up Node search bar class
* Add search/sort/filter logic
* Fixup Service default sort key
* Add Healthcheck search/sort/filtering
* Tweak CSS add a default Type of 'Serf' when type is blank
* Fix up tests and new test support
* Add ability to search on Service/Node name depending on where you are
* Fixup CheckID search predicate
* Use computed for DataCollection to use caching
* Alpha sort the Type menu
* Temporary fix for new non-changing style Ember Proxys
* Only special case EventSource proxies
John Cowen