This commit uses all our new ways of doing things to Lock Sessions and their interactions with KV and Nodes. This is mostly around are new under-the-hood things, but also I took the opportunity to upgrade some of the CSS to reuse some of our CSS utils that have been made over the past few months (%csv-list and %horizontal-kv-list).
Also added (and worked on existing) documentation for Lock Session related components.
This sounds a bit 'backwards' as the end goal here is to add an improved UX to partitions, not namespaces. The reason for doing it this way is that Namespaces already has a type of 'improved UX' CRUD in that it has one to many relationship in the form when saving your namespaces (the end goal for partitions). In moving Namespaces to use the same approach as partitions we:
- Ensure the new approach works with one-to-many forms.
- Test the new approach without writing a single test (we already have a bunch of tests for namespaces which are now testing the approach used by both namespaces and partitions)
Additionally:
- Fixes issue with missing default nspace in the nspace selector
- In doing when checking to see that things where consistent between the two, I found a few little minor problems with the Admin Partition CRUD so fixed those up here also.
- Removed the old style Nspace notifications
* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.
The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.
Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.
Notes:
Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
The default namespace, and the tokens default namespace (or its origin namespace) is slightly more complicated than other things we deal with in the UI, there's plenty of info/docs on this that I've added in this PR.
Previously:
When a namespace was not specified in the URL, we used to default to the default namespace. When you logged in using a token we automatically forward you the namespace URL that your token originates from, so you are then using the namespace for your token by default. You can of course then edit the URL to remove the namespace portion, or perhaps revisit the UI at the root path with you token already set. In these latter cases we would show you information from the default namespace. So if you had no namespace segment/portion in the URL, we would assume default, perform actions against the default namespace and highlight the default namespace in the namespace selector menu. If you wanted to perform actions in your tokens origin namespace you would have to manually select it from the namespace selector menu.
This PR:
Now, when you have no namespace segment/portion in the URL, we use the token's origin namespace instead (and if you don't have a token, we then use the default namespace like it was previously)
Notes/thoughts:
I originally thought we were showing an incorrectly selected namespace in the namespace selector, but it also matched up with what we were doing with the API, so it was in fact correct. The issue was more that we weren't selecting the origin namespace of the token for the user when a namespace segment was omitted from the URL. Seeing as we automatically forward you to the tokens origin namespace when you log in, and we were correctly showing the namespace we were acting on when you had no namespace segment in the URL (in the previous case default), I'm not entirely sure how much of an issue this actually was.
This characteristic of namespace+token+namespace is a little weird and its easy to miss a subtlety or two so I tried to add some documentation in here for future me/someone else (including some in depth code comment around one of the API endpoints where this is very subtle and very hard to miss). I'm not the greatest at words, so would be great to get some edits there if it doesn't seem clear to folks.
The fact that we used to save your previous datacenter and namespace into local storage for reasons also meant the interaction here was slightly more complicated than it needed to be, so whilst we were here we rejigged things slightly to satisfy said reasons still but not use local storage (we try and grab the info from higher up). A lot of the related code here is from before we had our Routlets which I think could probably make all of this a lot less complicated, but I didn't want to do a wholesale replacement in this PR, we can save that for a separate PR on its own at some point.
* Create BindingRule adapter and tests
* Create BindingRule serializer and test
* Create BindingRule model and repository
* Add binding-rules mock data
* Create binding-rules router and call endpoint
* Create Binding rules tab
* Create and use BindingView component
* Create empty state for BindingView
* Remove binding rule requestForQueryRecord endpoint and tests
* Update binding rules selector to be monospaced
* Add bind type tooltip
* Create and Tabular-dl styling component
* Update hr tag global styling
* Rename BindingView to BindingList and refactor
* Add translations for bind types tooltip info
* Remove unused endpoint
* Refactor based on review notes
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
* Create mock-api endpoints for auth-methods
* Implement auth-method endpoints and model with tests
* Create route and tab for auth-methods
* Create auth-method list and type components with styles
* Add JWT and OIDC svg logos to codebase
* Add brand translations
* Add SearchBar to Auth Methods
* Add acceptance test for Auth Methods UI
* Skip auth method repo test
* Changes from review notes
* Fixup auth-method modela and mock-data
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Skip repo test
* Fix to breaking serializer test
* Implement auth-method endpoints and model with tests
* Add acceptance test for Auth Methods UI
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Fix to breaking serializer test
* Update class for search
* Add auth-methods link to sidebar
* Fixup PR review notes
* Fixup review notes
* Only show OIDC filter with enterprise
* Update conditionals for MaxTokenTTL & TokenLocality
* Refactor
There are many places in the API where we receive a property set to
`null` which can then lead to defensive code deeper in the app in order
to guard for this type of thing when usually we are expecting an array
or for the property to be undefined using omitempty on the backend.
Previously we had two places where we would deal with this in the
serializer using our 'remove-null' util (KV and Intentions).
This new decorator lets you declaritively define this type of data using
a decorator @NullValue([]) (which would replce a null value with [].
@NullValue in turn uses a more generic @replace helper, which we
currently don't need but would let you replace any value with another,
not just a null value.
An additional benefit here is that the guard/replacement is executed
lazily when we get the property instead of serializing all the values
when they come in via the API. On super large datasets, where we only
visualize part of the dataset (say in our scroll panes), this feels like
a good improvement on the previous approach.
* Rename a model attr to not be overwritten by ember-data
* Make sure we can click on the instances
* Make sure we can click back to the preevious page, not root
* Add a forwards/back/forwards navigation test for service instances
* Rename a model attr to not be overwritten by ember-data
Co-authored-by: John Cowen <jcowen@hashicorp.com>
* Add `Local` property to Datacenters
* If you have not previous datacenter, redirect the user to the local dc
* Add an `is-local` class to the local datacenter in the DC picker
* Model layer changes to turn Node:ServiceInstances into hasMany
We tried to make something that feels a little like ember-data yet
not leave our approach of re-shaping the JSON directly from the
response.
1. We added transformHasManyResponse for re-shaping JSON for hasMany
relationships. we avoided the normalize word as ember-data serialize
methods usually return something JSON:API shaped and we distinctly don't
want to do that. Transform was the best word we could think of.
2. The integration tests across all of our models here feel very much
like those types of tests that aren't really testing much, or assert
too much to an extent that they get in the way rather than be of any
use. I'd very much like to move a lot of this to unit tests. Currently
most of the fingerprinting functionality is unit tested and these
integration tests were originally to give confidence that IDs and
related properties were being added correctly.
3. We've added a hasMany relationship, but not the corresponding
belongsTo - yet at least. We don't require the belongsTo right now, and
if we do we can add it later.
* Integrate ServiceInstance search bar for Node:ServiceInstances
* Hide Node.Meta when on the Node:ServiceINstance page
We use a little string replace hack here for a human-like label, this is
soon to be replaced with proper i10n replacement
* Always ensure that a Namespace is set, and add comment explaining
* Refactor grid styling for Topology page
* Crate TopologyMetrics Button component and move styling
* Create intention ID
* fixup button styling
* Return a link to the create intention page
* Rename Button to Popover component
* Fixup serializer test
* ui: Inline Topology Intention Actions (#9153)
* Add arrow and dot to/from metrics back in
* Add addional space to have metrics wrap and show in smaller screens
* Move logic for finding positioning
* Use color variables
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* ui: Upgrade ember-data models to use native classes/decorators
* ui: Update remaining ember-data imports
* ui: Move ember-data Adapters to use native classes
* ui: Upgrade serializers to native classes/decorators
* ui: remove meta from roles, they never had it to start with
* ui: Add a warning dialog if you go to remove permissions from an intention
* ui: Move modal styles next to component, add warning style
* ui: Move back to using the input name for a selector
* ui: Fixup negative "isn't" step so its optional
* Add warning modal to pageobject
* Fixup test for whether to show the warning modal or not
* Intention change action warning acceptence test
* Add a null/undefined Action
* ui: Add the most basic workspace root in /ui
* We already have a LICENSE file in the repository root
* Change directory path in build scripts ui-v2 -> ui
* Make yarn install flags configurable from elsewhere
* Minimal workspace root makefile
* Call the new docker specific target
* Update yarn in the docker build image
* Reconfigure the netlify target and move to the higher makefile
* Move ui-v2 -> ui/packages/consul-ui
* Change repo root to refleect new folder structure
* Temporarily don't hoist consul-api-double
* Fixup CI configuration
* Fixup lint errors
* Fixup Netlify target
John Cowen