* ui: Test Coverage Reporting (#7027)
* Serve up the /coverage folder whilst developing
* Upgrade ember-cli-api-double now it supports passthrough per url
* ui: make env into a service and use it where we need to be injectable
* Give http/client a body method so we can use it on its own for testing
* Add test helper for testing with and without nspaces enabled
* Add two tests, one thay needs nspaces and one that doesn't
* Keep cleaning up client/http, whilst figuring out a immutable bug
* Convert tests to new return format ([actual, leftovers])
During the refactor of the data layer we had a method that you can use
to do a request/response call i.e. adapter.request > serializer.respond
We weren't sure what to name this but eventually wanted it to live on
the HTTPAdapter itself (see removed comments in the changeset)
We've decided `rpc` is a good name and we've moved this to where we want
it. We've deprecated the old `request` method name but not removed it as
yet. There's also opportunity now to reduce the 'read/write' functions
further as they essentially do the same thing. Again we've left this for
the moment, but we are hoping to get the code for our custom Adapter down
to less than 100 LoC.
When using namespaces, the 'default' namespace is a little special in
that we wanted the option for all our URLs to stay the same when using
namespaces if you are using the default namespace, with the option of
also being able to explicitly specify `~default` as a namespace.
In other words both `ui/services/service-name` and
`ui/~default/services/service-name` show the same thing.
This means that if you switch between OSS and Enterprise, all of your
URLs stay the same, but you can still specifically link to the default
namespace itself.
Our routing configuration is duplicated in order to achieve this:
```
- :dc
- :service
- :kv
- :edit
- :nspace
- :dc
- :service
- :kv
- :edit
```
Secondly, ember routing resolves/matches routes in the order that you specify
them, unless, its seems, when using wildcard routes, like we do in the
KV area.
When not using the wildcard routes the above routing configuration
resolves/matches a `/dc-1/kv/service` to the `dc.kv.edit` route correctly
(dc:dc-1, kv:services), that route having been configured in a higher
priority than the nspace routes.
However when configured with wildcards (required in the KV area), note
the asterisk below:
```
- :dc
:service
- :kv
- *edit
- :nspace
- :dc
- :service
- :kv
- *edit
```
Given something like `/dc-1/kv/services` the router instead matches the
`nspace.dc.service` (nspace:dc-1, dc:kv, service:services) route first even
though the `dc.kv.edit` route should still match first.
Changing the `dc.kv.edit` route back to use a non-wildcard route
(:edit instead of *edit), returns the router to match the routes in the
correct order.
In order to work around this, we catch any incorrectly matched routes
(those being directed to the nspace Route but not having a `~`
character in the nspace parameter), and then recalculate the correct
route name and parameters. Lastly we use this recalculated route to
direct the user/app to the correct route.
This route recalcation requires walking up the route to gather up all of
the required route parameters, and although this feels like something
that could already exist in ember, it doesn't seem to. We had already
done a lot of this work a while ago when implementing our `href-mut`
helper. This commit therefore repurposes that work slighlty and externalizes
it outside of the helper itself into a more usable util so we can import
it where we need it. Tests have been added before refactoring it down
to make the code easier to follow.
We need to detect whether an object is an ember-data snapshot or just a
plain object, and we where restricted from using `instanceof` due to
ember-data's `Snapshot` class being private.
We'd chosen to go with `constructor.name` instead, which seemed to work,
but when the javascript gets minifed the name of the contructor is also
minified and therefore is not what you are expecting.
This commit reverts to our original idea of checking for the existence
and type of the `.attributes` function, which is the function we require
within the conditional, and therefore is more reliable (if the function
doesn't exist it will error out during development aswell as production)
* ui: Make API integration tests aware of CONSUL_NSPACES_ENABLED
* ui: Allow passing CONSUL_NSPACES_ENABLED in via the cli in ember
* ui: Add more makefile targets/package scripts to switch NSPACEs on/off
* ui: Ensure all acceptance tests continue to pass with NSPACEs on/off
This required a little tweaking of the dictionary, at some point
page-navigation and some of these little tweaks will no longer be
required
* ui: Try running CI frontend tests in two parellel runs oss/ent
* ui: Use correct make target, use different names for the reports
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
Adds xhr connection managment to http/1.1 installs
This includes various things:
1. An object pool to 'acquire', 'release' and 'dispose' of objects, also
a 'purge' to completely empty it
2. A `Request` data object, mainly for reasoning about the object better
3. A pseudo http 'client' which doens't actually control the request
itself but does help to manage the connections
An initializer is used to detect the script element of the consul-ui sourcecode
which we use later to sniff the protocol that we are most likely using for API access
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
* Add some tests to check the correct GET API endpoints are called
* Refactor adapters
1. Add integration tests for `urlFor...` and majority `handleResponse` methods
2. Refactor out `handleResponse` a little more into single/batch/boolean
methods
3. Move setting of the `Datacenter` property into the `handleResponse`
method, basically the same place that the uid is being set using the dc
parsed form the URL
4. Add some Errors for if you don't pass ids to certain `urlFor` methods
* Move settings to use the same service/route API as the rest of the app
* Put some ideas down for unit testing on adapters
* Favour `Model` over `Entity`
* Move away from using `reopen` to using Mixins
* Amend messages, comment/document some usage
* Make sure the returns are consistent in normalizePayload, also
Add some todo's in to remind me to think consider this further at a
later date. For example, is normalizePayload to be a hook or an
overridable method
* Start stripping back the HTML to semantics
* Use a variable rather than chaining
* Remove unused helpers
* Start picking through the new designs, start with listing pages
* First draft HTML for every page
* Making progress on the CSS
* Keep plugging away at the catalog css
* Looking at scrolling
* Wire up filtering
* Sort out filter counting, more or less done a few outstanding
* Start knocking the forms into shape
* Add in codemirror
* Keep moving forwards with the form like layouts
* Start looking at ACL editing page, add footer in
* Pull the filters back in, look at an autoresizer for scroll views
* First draft toggles
* 2nd draft healthcheck icons
* Tweak node healthcheck icons
* Looking at healthcheck detail icons
* Tweak the filter-bar and add selections to the in content tabs
* Add ACL create, pill-like acl type highlight
* Tweaking the main nav some more
* Working on the filter-bar and freetext-filter
* Masonry layout
* Stick with `checks` instead of healthy/unhealthy
* Fix up the filter numbers/counts
* Use the thead for a measure
* First draft tomography back in
* First draft DC dropdown
* Add a temporary create buttong to kv's
* Move KV and ACL to use a create page
* Move tags
* Run through old tests
* Injectable server
* Start adding test attributes
* Add some page objects
* More test attributes and pages
* Acl filter objects
* Add a page.. page object
* Clickable items in lists
* Add rest/spread babel plugin, remove mirage for now
* Add fix for ember-collection
* Keep track of acl filters
* ember-cli-page-object
* ember-test-selectors
* ui: update version of ui compile deps
* Update static assets
* Centralize radiogroup helper
* Rejig KV's and begin to clean it up
* Work around lack of Tags for the moment..
* Some little css tweaks and start to remove possibles
* Working on the dc page and incidentals
1. Sort the datacenter-picker list
2. Add a selected state to the datacenter-picker
3. Make dc an {Name: dc}
4. Add an env helper to get to 'env vars' from within templates
* Click outside stuff for the datacenter-picker, is-active on nav
* Make sure the dropdown CTA can be active
* Bump ember add pluralize helper
* Little try at sass based custom queries
* Rejig tablular collection so it deals with resizing, actions
1. WIP: start building actions dropdowns
2. Move tabular collection to deal with resizing to rule out differences
* First draft actions dropdowns
* Add ports, selectable IP's
* Flash messages, plus general cleanup/consistency
1. Add ember-cli-flash for flash messages
2. Move everything to get() instead of item.get
3. Spotted a few things that weren't consistent
* DOn't go lower than zero
* First draft vertical menu
* Missed a get, tweak dropmenu tick
* Big cleanup
1. this.get(), this.set() > get(), set()
2. assign > {...{}, ...{}}
3. Seperator > separator
* WIP: settings
* Moved things into a ui-v2 folder
* Decide on a way to do the settings page whilst maintaining the url + dc's
* Start some error pages
* Remove base64 polyfill
* Tie in settings, fix atob bug, tweak layout css
* Centralize confirmations into a component
* Allow switching between the old and new UI with the CONSUL_UI_BETA env var
Currently all the assets are packaged into a single AssetFS and a prefix is configured to switch between the two.
* Attempt at some updates to integrate the v2 ui build into the main infrastructure
* Add redirect to index.html for unknown paths
* Allow redictor to /index.html for new ui when using -ui-dir
* Take ACLs to the correct place on save
* First pass breadcrumbs
* Remove datacenter selector on the index page
* Tweak overall layout
* Make buttons 'resets'
* Tweak last DC stuff
* Validations plus kv keyname viewing tweaks
* Pull sessions back in
* Tweak the env vars to be more reusable
* Move isAnon to the view
* No items and disabled acl css
* ACL and KV details
1. Unauthorized page
2. Make sure the ACL is always selected when it needs it
3. Check record deletion with a changeset
* Few more acl tweaks/corrections
* Add no items view to node > services
* Tags for node > services
* Make sure we have tags
* Fix up the labels on the tomography graph
* Add node link (agent) to kv sessions
* Duplicate up `create` for KV 'root creation'
* Safety check for health checks
* Fix up the grids
* Truncate td a's, fix kv columns
* Watch for spaces in KV id's
* Move actions to their own mixins for now at least
* Link reset to settings incase I want to type it in
* Tweak error page
* Cleanup healthcheck icons in service listing
* Centralize errors and make getting back easier
* Nice numbers
* Compact buttons
* Some incidental css cleanups
* Use 'Key / Value' for root
* Tweak tomography layout
* Fix single healthcheck unhealthy resource
* Get loading screen ready
* Fix healthy healthcheck tick
* Everything in header starts white
* First draft loader
* Refactor the entire backend to use proper unique keys, plus..
1. Make unique keys form dc + slug (uid)
2. Fun with errors...
* Tweak header colors
* Add noopener noreferrer to external links
* Add supers to setupController
* Implement cloning, using ember-data...
* Move the more expensive down the switch order
* First draft empty record cleanup..
* Add the cusomt store test
* Temporarily use the htmlSafe prototype to remove the console warning
* Encode hashes in urls
* Go back to using title for errors for now
* Start removing unused bulma
* Lint
* WIP: Start looking at failing tests
* Remove single redirect test
* Finish off error message styling
* Add full ember-data cache invalidation to avoid stale data...
* Add uncolorable warning icons
* More info icon
* Rearrange single service, plus tag printing
* Logo
* No quotes
* Add a simple startup logo
* Tweak healthcheck statuses
* Fix border-color for healthchecks
* Tweak node tabs
* Catch 401 ACL errors and rethrow with the provided error message
* Remove old acl unauth and error routes
* Missed a super
* Make 'All' refer to number of checks, not services
* Remove ember-resizer, add autoprefixer
* Don't show tomography if its not worth it, viewify it more also
* Little model cleanup
* Chevrons
* Find a way to reliably set the class of html from the view
* Consistent html
* Make sure session id's are visible as long as possible
* Fix single service check count
* Add filters and searchs to the query string
* Don't remember the selected tab
* Change text
* Eror tweaking
* Use chevrons on all breadcrumbs even in kv's
* Clean up a file
* Tweak some messaging
* Makesure the footer overlays whats in the page
* Tweak KV errors
* Move json toggle over to the right
* feedback-dialog along with copy buttons
* Better confirmation dialogs
* Add git sha comment
* Same title as old UI
* Allow defaults
* Make sure value is a string
* WIP: Scrolling dropdowns/confirmations
* Add to kv's
* Remove set
* First pass trace
* Better table rows
* Pull over the hashi code editor styles
* Editor tweaks
* Responsive tabs
* Add number formatting to tomography
* Review whats left todo
* Lint
* Add a coordinate ember data triplet
* Bump in a v2.0.0
* Update old tests
* Get coverage working again
* Make sure query keys are also encoded
* Don't test console.error
* Unit test some more utils
* Tweak the size of the tabular collections
* Clean up gitignore
* Fix copy button rollovers
* Get healthcheck 'icon icons' onto the text baseline
* Tweak healthcheck padding and alignment
* Make sure commas kick in in rtt, probably never get to that
* Improve vertical menu
* Tweak dropdown active state to not have a bg
* Tweak paddings
* Search entire string not just 'startsWith'
* Button states
* Most buttons have 1px border
* More button tweaks
* You can only view kv folders
* CSS cleanup reduction
* Form input states and little cleanup
* More CSS reduction
* Sort checks by importance
* Fix click outside on datacenter picker
* Make sure table th's also auto calculate properly
* Make sure `json` isn't remembered in KV editing
* Fix recursive deletion in KV's
* Centralize size
* Catch updateRecord
* Don't double envode
* model > item consistency
* Action loading and ACL tweaks
* Add settings dependencies to acl tests
* Better loading
* utf-8 base64 encode/decode
* Don't hang off a prototype for htmlSafe
* Missing base64 files...
* Get atob/btoa polyfill right
* Shadowy rollovers
* Disabled button styling for primaries
* autofocuses only onload for now
* Fix footer centering
* Beginning of 'notices'
* Remove the isLocked disabling as we are letting you do what the API does
* Don't forget the documentation link for sessions
* Updates are more likely
* Use exported constant
* Dont export redirectFS and a few other PR updates
* Remove the old bootstrap config which was used for the old UI skin
* Use curlies for multiple properties
