Commit Graph

86 Commits

Author SHA1 Message Date
Daniel Nephin 09ae0ab94a acl: make ACLDisabledTTL a constant
This field was never user-configurable. We always overwrote the value with 120s from
NonUserSource. However, we also never copied the value from RuntimeConfig to consul.Config,
So the value in NonUserSource was always ignored, and we used the default value of 30s
set by consul.DefaultConfig.

All of this code is an unnecessary distraction because a user can not actually configure
this value.

This commit removes the fields and uses a constant value instad. Someone attempting to set
acl.disabled_ttl in their config will now get an error about an unknown field, but previously
the value was completely ignored, so the new behaviour seems more correct.

We have to keep this field in the AutoConfig response for backwards compatibility, but the value
will be ignored by the client, so it doesn't really matter what value we set.
2021-08-17 13:34:18 -04:00
Daniel Nephin 75baa22e64 acl: remove ACLResolver config fields from consul.Config 2021-08-17 13:32:52 -04:00
Daniel Nephin 047abdd73c acl: remove ACLDatacenter
This field has been unnecessary for a while now. It was always set to the same value
as PrimaryDatacenter. So we can remove the duplicate field and use PrimaryDatacenter
directly.

This change was made by GoLand refactor, which did most of the work for me.
2021-08-06 18:27:00 -04:00
Daniel Nephin 1e23d181b5 config: remove misleading UseTLS field
This field was documented as enabling TLS for outgoing RPC, but that was not the case.
All this field did was set the use_tls serf tag.

Instead of setting this field in a place far from where it is used, move the logic to where
the serf tag is set, so that the code is much more obvious.
2021-07-09 19:01:45 -04:00
Daniel Nephin 3c60a46376 config: remove duplicate TLSConfig fields from agent/consul.Config
tlsutil.Config already presents an excellent structure for this
configuration. Copying the runtime config fields to agent/consul.Config
makes code harder to trace, and provides no advantage.

Instead of copying the fields around, use the tlsutil.Config struct
directly instead.

This is one small step in removing the many layers of duplicate
configuration.
2021-07-09 18:49:42 -04:00
Daniel Nephin b4a10443d1 ca: remove unused RotationPeriod field
This field was never used. Since it is persisted as part of a map[string]interface{} it
is pretty easy to remove it.
2021-07-05 19:15:44 -04:00
Matt Keeler 58b934133d hcs-1936: Prepare for adding license auto-retrieval to auto-config in enterprise 2021-05-24 13:20:30 -04:00
Paul Banks d47eea3a3f
Make Raft trailing logs and snapshot timing reloadable (#10129)
* WIP reloadable raft config

* Pre-define new raft gauges

* Update go-metrics to change gauge reset behaviour

* Update raft to pull in new metric and reloadable config

* Add snapshot persistance timing and installSnapshot to our 'protected' list as they can be infrequent but are important

* Update telemetry docs

* Update config and telemetry docs

* Add note to oldestLogAge on when it is visible

* Add changelog entry

* Update website/content/docs/agent/options.mdx

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
2021-05-04 15:36:53 +01:00
Daniel Nephin e8427a48ab agent/consuk: Rename RPCRate -> RPCRateLimit
so that the field name is consistent across config structs.
2021-01-14 17:26:00 -05:00
Daniel Nephin e5320c2db6 agent/consul: make Client/Server config reloading more obvious
I believe this commit also fixes a bug. Previously RPCMaxConnsPerClient was not being re-read from the RuntimeConfig, so passing it to Server.ReloadConfig was never changing the value.

Also improve the test runtime by not doing a lot of unnecessary work.
2021-01-14 17:21:10 -05:00
Matt Keeler 4bca029be9
Refactor to call non-voting servers read replicas (#9191)
Co-authored-by: Kit Patella <kit@jepsen.io>
2020-11-17 10:53:57 -05:00
R.B. Boyer a5bd1ba323
agent: return the default ACL policy to callers as a header (#9101)
Header is: X-Consul-Default-ACL-Policy=<allow|deny>

This is of particular utility when fetching matching intentions, as the
fallthrough for a request that doesn't match any intentions is to
enforce using the default acl policy.
2020-11-12 10:38:32 -06:00
Matt Keeler 755fb72994
Switch to using the external autopilot module 2020-11-09 09:22:11 -05:00
Daniel Nephin dd0e8d42c4
Merge pull request #8825 from hashicorp/streaming/add-config
streaming: add config and docs
2020-10-09 14:33:58 -04:00
Matt Keeler 141eb60f06
Add per-agent reconnect timeouts (#8781)
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.

This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
2020-10-08 15:02:19 -04:00
Daniel Nephin 05df7b18a9 config: add field for enabling streaming RPC endpoint 2020-10-08 12:11:20 -04:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
Daniel Nephin 863a9df951 server: add gRPC server for streaming events
Includes a stats handler and stream interceptor for grpc metrics.

Co-authored-by: Paul Banks <banks@banksco.de>
2020-09-08 12:10:41 -04:00
Chris Piraino b245d60200 Set metrics reporting interval to 9 seconds
This is below the 10 second interval that lib/telemetry.go implements as
its aggregation interval, ensuring that we always report these metrics.
2020-09-02 10:24:23 -05:00
Chris Piraino 45a4057f60 Report node/service usage metrics from every server
Using the newly provided state store methods, we periodically emit usage
metrics from the servers.

We decided to emit these metrics from all servers, not just the leader,
because that means we do not have to care about leader election flapping
causing metrics turbulence, and it seems reasonable for each server to
emit its own view of the state, even if they should always converge
rapidly.
2020-09-02 10:24:17 -05:00
Daniel Nephin f3b63514d5 testing: Remove NotifyShutdown
NotifyShutdown was only used for testing. Now that t.Cleanup exists, we
can use that instead of attaching cleanup to the Server shutdown.

The Autopilot test which used NotifyShutdown doesn't need this
notification because Shutdown is synchronous. Waiting for the function
to return is equivalent.
2020-08-07 17:14:44 -04:00
Daniel Nephin e6c94c1411 Remove LogOutput from Server 2020-08-05 14:00:44 -04:00
Daniel Nephin c7c941811d config: Remove unused field 2020-08-05 13:25:08 -04:00
Matt Keeler e7d8a02ae8
Move generation of the CA Configuration from the agent code into a method on the RuntimeConfig (#8363)
This allows this to be reused elsewhere.
2020-07-23 16:05:28 -04:00
Matt Keeler eda8cb39fd
Implement the insecure version of the Cluster.AutoConfig RPC endpoint
Right now this is only hooked into the insecure RPC server and requires JWT authorization. If no JWT authorizer is setup in the configuration then we inject a disabled “authorizer” to always report that JWT authorization is disabled.
2020-06-17 11:25:29 -04:00
R.B. Boyer 16db20b1f3
acl: remove the deprecated `acl_enforce_version_8` option (#7991)
Fixes #7292
2020-05-29 16:16:03 -05:00
Kit Patella c3d24d7c3e agent: stub out auditing functionality in OSS 2020-04-16 15:07:52 -07:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Hans Hasselberg 50281032e0
Security fixes (#7182)
* Mitigate HTTP/RPC Services Allow Unbounded Resource Usage

Fixes #7159.

Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
Co-authored-by: Paul Banks <banks@banksco.de>
2020-01-31 11:19:37 -05:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Hans Hasselberg 315ba7d6ad
connect: check if intermediate cert needs to be renewed. (#6835)
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.

In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
2020-01-17 23:27:13 +01:00
Matej Urbas d877e091d6 agent: configurable MaxQueryTime and DefaultQueryTime. (#3777) 2020-01-17 14:20:57 +01:00
Matt Keeler 9bd378a95c
Add EnterpriseConfig stubs (#6566) 2019-10-01 14:34:55 -04:00
R.B. Boyer 5c5f21088c sdk: add freelist tracking and ephemeral port range skipping to freeport
This should cut down on test flakiness.

Problems handled:

- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.

- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).

- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
2019-09-17 14:30:43 -05:00
Hans Hasselberg 73c4e9f07c
tls: auto_encrypt enables automatic RPC cert provisioning for consul clients (#5597) 2019-06-27 22:22:07 +02:00
Pierre Souchay e394a9469b Support for maximum size for Output of checks (#5233)
* Support for maximum size for Output of checks

This PR allows users to limit the size of output produced by checks at the agent 
and check level.

When set at the agent level, it will limit the output for all checks monitored
by the agent.

When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.

Default value is 4k, and input must be at least 1.
2019-06-26 09:43:25 -06:00
Hans Hasselberg 0d8d7ae052
agent: transfer leadership when establishLeadership fails (#5247) 2019-06-19 14:50:48 +02:00
Kyle Havlovitz ad24456f49
Set the dead node reclaim timer at 30s 2019-05-15 11:59:33 -07:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
R.B. Boyer 76321aa952 acl: tokens can be created with an optional expiration time (#5353) 2019-04-26 14:47:51 -05:00
Matt Keeler 3ea9fe3bff
Implement bootstrapping proxy defaults from the config file (#5714) 2019-04-26 14:25:03 -04:00
Matt Keeler 3b5d38fb49
Implement config entry replication (#5706) 2019-04-26 13:38:39 -04:00
kaitlincarter-hc 7859d8c409
[docs] Server Performance (#5627)
* Moving server performance guide to docs.

* fixing broken links

* updating broken link

* fixing broken links
2019-04-17 13:17:12 -05:00
Hans Hasselberg d511e86491
agent: enable reloading of tls config (#5419)
This PR introduces reloading tls configuration. Consul will now be able to reload the TLS configuration which previously required a restart. It is not yet possible to turn TLS ON or OFF with these changes. Only when TLS is already turned on, the configuration can be reloaded. Most importantly the certificates and CAs.
2019-03-13 10:29:06 +01:00
Matt Keeler 0c76a4389f
ACL Token Persistence and Reloading (#5328)
This PR adds two features which will be useful for operators when ACLs are in use.

1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)

Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.

Some other secondary changes:

* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. 
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
2019-02-27 14:28:31 -05:00
Hans Hasselberg 75ababb54f
Centralise tls configuration part 1 (#5366)
In order to be able to reload the TLS configuration, we need one way to generate the different configurations.

This PR introduces a `tlsutil.Configurator` which holds a `tlsutil.Config`. Afterwards it is responsible for rendering every `tls.Config`. In this particular PR I moved `IncomingHTTPSConfig`, `IncomingTLSConfig`, and `OutgoingTLSWrapper` into `tlsutil.Configurator`.

This PR is a pure refactoring - not a single feature added. And not a single test added. I only slightly modified existing tests as necessary.
2019-02-26 16:52:07 +01:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Kyle Havlovitz 96a35f8abc re-add Connect multi-dc config changes
This reverts commit 8bcfbaffb6588b024cd1a3cf0952e6bfa7d9e900.
2018-10-19 08:41:03 -07:00
Jack Pearkes 847a0a5266 Revert "Connect multi-dc config" (#4784) 2018-10-11 17:32:45 +01:00
Kyle Havlovitz 5b98a602af agent: add primary_datacenter and connect replication config options 2018-10-10 12:17:59 -07:00