Commit Graph

51 Commits

Author SHA1 Message Date
Daniel Nephin 2995ac61f2 acl: remove the last of the legacy FSM
Replace it with an implementation that returns an error, and rename some symbols
to use a Deprecated suffix to make it clear.

Also remove the ACLRequest struct, which is no longer referenced.
2021-09-29 12:42:23 -04:00
Daniel Nephin 7e37c9a765 acl: remove legacy field to ACLBoostrap 2021-09-29 12:42:23 -04:00
R.B. Boyer e565409c6a
state: partition the usage metrics subsystem (#10867) 2021-08-18 09:27:15 -05:00
R.B. Boyer c271976445
state: refactor some node/coordinate state store functions to take an EnterpriseMeta (#10687)
Note the field is not used yet.
2021-07-23 13:42:23 -05:00
R.B. Boyer 62ac98b564
agent/structs: add a bunch more EnterpriseMeta helper functions to help with partitioning (#10669) 2021-07-22 13:20:45 -05:00
Freddy f399fd2add
Rename CatalogDestinationsOnly (#10397)
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.

This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
2021-06-14 14:15:09 -06:00
Daniel Nephin bf4c289804 config-entry: remove Kind and Name field from Mesh config entry
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.

In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
2021-04-29 17:11:21 -04:00
Freddy 401f3010e0
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
Daniel Nephin 2a10f01bf5 snapshot: fix saving of auth methods
Previously only a single auth method would be saved to the snapshot. This commit fixes the typo
and adds to the test, to show that all auth methods are now saved.
2021-04-14 16:51:21 -04:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
Daniel Nephin f929a7117e state: Remove unnecessary entMeta arg to EnsureConfigEntry 2021-02-03 18:10:38 -05:00
Matt Keeler 755fb72994
Switch to using the external autopilot module 2020-11-09 09:22:11 -05:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
R.B. Boyer a77b518542
server: create new memdb table for storing system metadata (#8703)
This adds a new very tiny memdb table and corresponding raft operation
for updating a very small effective map[string]string collection of
"system metadata". This can persistently record a fact about the Consul
state machine itself.

The first use of this feature will come in a later PR.
2020-10-06 10:08:37 -05:00
Chris Piraino 3af96930eb Add new usage memdb table that tracks usage counts of various elements
We update the usage table on Commit() by using the TrackedChanges() API
of memdb.

Track memdb changes on restore so that usage data can be compiled
2020-09-02 10:24:16 -05:00
Kyle Havlovitz 2601585017 fsm: Fix snapshot bug with restoring node/service/check indexes 2020-08-11 11:49:52 -07:00
R.B. Boyer 72a515f5ec
connect: various changes to make namespaces for intentions work more like for other subsystems (#8194)
Highlights:

- add new endpoint to query for intentions by exact match

- using this endpoint from the CLI instead of the dump+filter approach

- enforcing that OSS can only read/write intentions with a SourceNS or
  DestinationNS field of "default".

- preexisting OSS intentions with now-invalid namespace fields will
  delete those intentions on initial election or for wildcard namespaces
  an attempt will be made to downgrade them to "default" unless one
  exists.

- also allow the '-namespace' CLI arg on all of the intention subcommands

- update lots of docs
2020-06-26 16:59:15 -05:00
Daniel Nephin 1ef8279ac9
Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4
ci: enable SA4006 staticcheck check and add ineffassign
2020-06-17 12:16:02 -04:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin 5f24171f13 ci: enable SA4006 staticcheck check
And fix the 'value not used' issues.

Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
2020-06-16 13:10:11 -04:00
Hans Hasselberg bec21c849d
Tokens converted from legacy ACLs get their Hash computed (#8047)
* Fixes #5606: Tokens converted from legacy ACLs get their Hash computed

This allows new style token replication to work for legacy tokens as well when they change.

* tests: fix timestamp comparison

Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
2020-06-08 21:44:06 +02:00
R.B. Boyer 54c7f825d6
create lib/stringslice package (#7934) 2020-05-27 11:47:32 -05:00
Chris Piraino a635e23f86
Restoring config entries updates the gateway-services table (#7811)
- Adds a new validateConfigEntryEnterprise function
- Also fixes some state store tests that were failing in enterprise
2020-05-08 13:24:33 -05:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Matt Keeler 442924c35a
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Matt Keeler 90ae4a1f1e
OSS KV Modifications to Support Namespaces 2019-11-25 12:57:35 -05:00
Matt Keeler 68d79142c4
OSS Modifications necessary for sessions namespacing 2019-11-25 12:07:04 -05:00
Matt Keeler 1270a93274
Updates to allow for Namespacing ACL resources in Consul Enterp… (#6675)
Main Changes:

• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.

Secondary Changes:

• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
2019-10-24 14:38:09 -04:00
R.B. Boyer 0675e0606e
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
Mike Morris 88df658243
connect: remove managed proxies (#6220)
* connect: remove managed proxies implementation and all supporting config options and structs

* connect: remove deprecated ProxyDestination

* command: remove CONNECT_PROXY_TOKEN env var

* agent: remove entire proxyprocess proxy manager

* test: remove all managed proxy tests

* test: remove irrelevant managed proxy note from TestService_ServerTLSConfig

* test: update ContentHash to reflect managed proxy removal

* test: remove deprecated ProxyDestination test

* telemetry: remove managed proxy note

* http: remove /v1/agent/connect/proxy endpoint

* ci: remove deprecated test exclusion

* website: update managed proxies deprecation page to note removal

* website: remove managed proxy configuration API docs

* website: remove managed proxy note from built-in proxy config

* website: add note on removing proxy subdirectory of data_dir
2019-08-09 15:19:30 -04:00
Jeff Mitchell e0068431f5 Chunking support (#6172)
* Initial chunk support

This uses the go-raft-middleware library to allow for chunked commits to the KV
2019-07-24 17:06:39 -04:00
R.B. Boyer 5a505c5b3a acl: adding support for kubernetes auth provider login (#5600)
* auth providers
* binding rules
* auth provider for kubernetes
* login/logout
2019-04-26 14:49:25 -05:00
Kyle Havlovitz 81254deb59 Add RPC endpoints for config entry operations 2019-04-06 23:38:08 -07:00
Kyle Havlovitz ace5c7a1cb Encode config entry FSM messages in a generic type 2019-03-28 00:06:56 -07:00
Kyle Havlovitz 96a460c0cf Clean up service config state store methods 2019-03-27 16:52:38 -07:00
Kyle Havlovitz c2cba68042 Fix fsm serialization and add snapshot/restore 2019-03-20 16:13:13 -07:00
Kyle Havlovitz e7946197b8 connect/ca: prevent blank CA config in snapshot
This PR both prevents a blank CA config from being written out to
a snapshot and allows Consul to gracefully recover from a snapshot
with an invalid CA config.

Fixes #4954.
2018-12-06 17:40:53 -08:00
Kyle Havlovitz cf2210b5c5 fsm: update snapshot/restore test to include ID and datacenter 2018-10-30 15:53:14 -07:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Kyle Havlovitz 26a21df014
Merge branch 'master' into ca-snapshot-fix 2018-08-16 13:00:54 -07:00
Kyle Havlovitz af4b037c52
fsm: add connect service config to snapshot/restore test 2018-08-16 12:58:54 -07:00
nickmy9729 43a68822e3 Added code to allow snapshot inclusion of NodeMeta (#4527) 2018-08-16 15:33:35 -04:00
Kyle Havlovitz 880eccb502
fsm: add missing CA config to snapshot/restore logic 2018-08-16 11:58:50 -07:00
Kyle Havlovitz f9a35a9338
connect: add provider state to snapshots 2018-07-11 11:34:49 -07:00
Mitchell Hashimoto 2dfca5dbc2
agent/consul/fsm,state: snapshot/restore for CA roots 2018-06-14 09:41:52 -07:00
Mitchell Hashimoto 1d0b4ceedb
agent: convert all intention tests to testify/assert 2018-06-14 09:41:44 -07:00
Mitchell Hashimoto f07340e94f
agent/consul/fsm,state: snapshot/restore for intentions 2018-06-14 09:41:44 -07:00
Kyle Havlovitz 8546a1d3c6
Move autopilot to a standalone package 2017-12-11 16:45:33 -08:00