Commit Graph

44 Commits

Author SHA1 Message Date
Daniel Nephin 9c6458c6c2 rename GRPC->XDS where appropriate 2021-07-09 12:17:45 -04:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
R.B. Boyer 7c9763d027
xds: emit a labeled gauge of connected xDS streams by version (#10243)
Fixes #10099
2021-05-14 13:59:13 -05:00
R.B. Boyer 91bee6246f
Support Incremental xDS mode (#9855)
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.

Union of all commit messages follows to give an overarching summary:

xds: exclusively support incremental xDS when using xDS v3

Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support

Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit

xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings

In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.

This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.

xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 13:54:05 -05:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
freddygv 8de6b2590c Make xDS labeling consistent with proxycfg 2021-02-05 15:15:52 -07:00
freddygv a0be7dcc1d Add trace logs to proxycfg state runner and xds srv 2021-02-02 12:26:38 -07:00
Daniel Nephin f6543b1651 xds: remove Server.Initialize
Requiring a call to initialize to set a single field is not really substantially different
from having to set that field to a value.
2021-01-07 18:13:48 -05:00
Daniel Nephin de226f26e4 xds: Pass in logger
small cleanup in tests
2021-01-07 18:13:48 -05:00
freddygv 3e4bc36941 Add server receiver to routes and log tgw err 2020-09-03 16:19:58 -06:00
freddygv 8f470b30d7 Log error as error 2020-08-28 13:11:55 -06:00
R.B. Boyer f2b8bf109c
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
R.B. Boyer 8ea4c482b3
xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424)
Related changes:

- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
2020-07-31 15:52:49 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
R.B. Boyer ba83b52b32
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
Chris Piraino 2d657c3c0f
Allow ingress gateways to send empty clusters, routes, and listeners (#7795)
This is useful when updating an config entry with no services, and the
expected behavior is that envoy closes all listeners and clusters.

We also allow empty routes because ingress gateways name route
configurations based on the port of the listener, so it is important we
remove any stale routes. Then, if a new listener with an old port is
added, we will not have to deal with stale routes hanging around routing
to the wrong place.

Endpoints are associated with clusters, and thus by deleting the
clusters we don't have to care about sending empty endpoint responses.
2020-05-07 16:19:25 -05:00
freddygv 0ad47bdda5 Remove fallthrough 2020-04-27 12:00:14 -06:00
freddygv 3849b066a6 Allow terminating-gateway to setup listener before servicegroups are known 2020-04-27 11:08:40 -06:00
freddygv 2e35a9bb18 Add xds cluster/listener/endpoint management 2020-04-27 11:08:40 -06:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Daniel Nephin d29c47c420 A little less 'just' 2020-03-27 16:08:25 -04:00
Matt Keeler 25568626f7
Fix a couple bugs regarding intentions with namespaces (#7169) 2020-01-29 17:30:38 -05:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Hans Hasselberg e00effa325
agent: setup grpc server with auto_encrypt certs and add -https-port (#7086)
* setup grpc server with TLS config used across consul.
* add -https-port flag
2020-01-22 11:32:17 +01:00
Matt Keeler 442924c35a
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
R.B. Boyer a9343db838
xds: mesh gateway CDS requests are now allowed to receive an empty CDS reply (#6787)
This is the rest of the fix for #6543 that was incompletely fixed in #6576.
2019-11-26 15:55:13 -06:00
Matt Keeler f9a43a1e2d
ACL Authorizer overhaul (#6620)
* ACL Authorizer overhaul

To account for upcoming features every Authorization function can now take an extra *acl.EnterpriseAuthorizerContext. These are unused in OSS and will always be nil.

Additionally the acl package has received some thorough refactoring to enable all of the extra Consul Enterprise specific authorizations including moving sentinel enforcement into the stubbed structs. The Authorizer funcs now return an acl.EnforcementDecision instead of a boolean. This improves the overall interface as it makes multiple Authorizers easily chainable as they now indicate whether they had an authoritative decision or should use some other defaults. A ChainedAuthorizer was added to handle this Authorizer enforcement chain and will never itself return a non-authoritative decision.

* Include stub for extra enterprise rules in the global management policy

* Allow for an upgrade of the global-management policy
2019-10-15 16:58:50 -04:00
Freddy 5eace88ce2
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
Matt Keeler 39bb0e3e77 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Matt Keeler b13dc6289b
Prepare for having different service kinds that are all generic… (#6013)
Default to internal error when service kind is unknown
2019-06-24 15:05:36 -04:00
Paul Banks 737be347eb
Upgrade xDS (go-control-plane) API to support Envoy 1.10. (#5872)
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.

This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.

It also adds integration test support in CI for 1.10.0.

* Fix go vet complaints

* go mod vendor

* Update Envoy version info in docs

* Update website/source/docs/connect/proxies/envoy.md
2019-06-07 07:10:43 -05:00
Matt Keeler 923448f00e
Update links to envoy docs on xDS protocol (#5871) 2019-06-03 11:03:05 -05:00
Paul Banks d6c0557e86
Connect: allow configuring Envoy for L7 Observability (#5558)
* Add support for HTTP proxy listeners

* Add customizable bootstrap configuration options

* Debug logging for xDS AuthZ

* Add Envoy Integration test suite with basic test coverage

* Add envoy command tests to cover new cases

* Add tracing integration test

* Add gRPC support WIP

* Merged changes from master Docker. get CI integration to work with same Dockerfile now

* Make docker build optional for integration

* Enable integration tests again!

* http2 and grpc integration tests and fixes

* Fix up command config tests

* Store all container logs as artifacts in circle on fail

* Add retries to outer part of stats measurements as we keep missing them in CI

* Only dump logs on failing cases

* Fix typos from code review

* Review tidying and make tests pass again

* Add debug logs to exec test.

* Fix legit test failure caused by upstream rename in envoy config

* Attempt to reduce cases of bad TLS handshake in CI integration tests

* bring up the right service

* Add prometheus integration test

* Add test for denied AuthZ both HTTP and TCP

* Try ANSI term for Circle
2019-04-29 17:27:57 +01:00
Paul Banks cf5528734c
Connect: Fix Envoy getting stuck during load (#5499)
* Connect: Fix Envoy getting stuck during load

Also in this PR:
 - Enabled outlier detection on upstreams which will mark instances unhealthy after 5 failures (using Envoy's defaults)
 - Enable weighted load balancing where DNS weights are configured

* Fix empty load assignments in the right place

* Fix import names from review

* Move millisecond parse to a helper function
2019-03-22 19:37:14 +00:00
R.B. Boyer 91e78e00c7
fix typos reported by golangci-lint:misspell (#5434) 2019-03-06 11:13:28 -06:00
R.B. Boyer 6d76b137ba Check ACLs more often for xDS endpoints.
For established xDS gRPC streams recheck ACLs for each DiscoveryRequest
or DiscoveryResponse. If more than 5 minutes has elapsed since the last
ACL check, recheck even without an incoming DiscoveryRequest or
DiscoveryResponse. ACL failures will terminate the stream.
2019-01-22 11:12:40 -06:00
R.B. Boyer b771c32361 Fix some test typos. 2019-01-18 16:12:43 -06:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Paul Banks 1e4c5a1811 Connect Envoy Command (#4735)
* Plumb xDS server and proxyxfg into the agent startup

* Add `consul connect envoy` command to allow running Envoy as a connect sidecar.

* Add test for help tabs; typos and style fixups from review
2018-10-10 16:55:34 +01:00
Paul Banks 251da1077f xDS Server Implementation (#4731)
* Vendor updates for gRPC and xDS server

* xDS server implementation for serving Envoy as a Connect proxy

* Address initial review comments

* consistent envoy package aliases; typos fixed; override TLS and authz for custom listeners

* Moar Typos

* Moar typos
2018-10-10 16:55:34 +01:00