* Delete collapsible notices component and related helper
* Add relative t action/helper to our Route component
* Replace single use CollapsibleNotices with multi-use Disclosure
We noticed that the Service Instance listing on both Node and Service views where not taking into account proxy instance health. This fixes that up so that the small health check information in each Service Instance row includes the proxy instances health checks when displaying Service Instance health (afterall if the proxy instance is unhealthy then so is the service instance that it should be proxying)
* Refactor Consul::InstanceChecks with docs
* Add to-hash helper, which will return an object keyed by a prop
* Stop using/relying on ember-data type things, just use a hash lookup
* For the moment add an equivalent "just give me proxies" model prop
* Start stitching things together, this one requires an extra HTTP request
..previously we weren't even requesting proxies instances here
* Finish up the stitching
* Document Consul::ServiceInstance::List while I'm here
* Fix up navigation mocks Name > Service
* Add some less fake API data
* Rename the models class so as to not be confused with JS Proxies
* Rearrange routlets slightly and add some initial outletFor tests
* Move away from a MeshChecks computed property and just use a helper
* Just use ServiceChecks for healthiness filtering for the moment
* Make TProxy cookie configurable
* Amend exposed paths and upstreams so they know about meta AND proxy
* Slight bit of TaggedAddresses refactor while I was checking for `meta` etc
* Document CONSUL_TPROXY_ENABLE
We recently changed the intentions form to take a full model of a dc rather than just the string identifier (so {Name: 'dc', Primary: true} vs just 'dc' in order to know whether the DC is the primary or not.
Unfortunately, we only did this on the global intentions page not the per service intentions page. This makes it impossible to save an intention from the per service intention page (whilst you can still save intentions from the global intention page as normal).
The fix here pretty much copy/pastes the approach taken in the global intention edit template over to the per service intention edit template.
Tests have been added for creation in the per service intention section, which again are pretty much just copied from the global one, unfortunately this didn't exist previously which would have helped prevent this.
* ui: Add login button to per service intentions for zero results
* Add login button and consistent header for when you have zero nodes
* `services` doesn't exists use `items` consequently:
Previous to this fix we would not show a more tailored message for when
you empty result set was due to a user search rather than an empty
result set straight from the backend
* Fix `error` > `@error` in ErrorState plus code formatting and more docs
* Changelog
- Moves where they appear up to the <App /> component.
- Instead of a <Notification /> wrapping component to move whatever you use for a notification up to where they need to appear (via ember-cli-flash), we now use a {{notification}} modifier now we have modifiers.
- Global notifications/flashes are no longer special styles of their own. You just use the {{notification}} modifier to hoist whatever component/element you want up to the top of the page. This means we can re-use our existing <Notice /> component for all our global UI notifications (this is the user visible change here)
Port of: Ensure we check intention service prefix permissions for per service (#11270)
Previously, when showing some action buttons for 'per service intentions' we used a global 'can I do something with any intention' permission to decide whether to show a certain button or not. If a user has a token that does not have 'global' intention permissions, but does have intention permissions on one or more specific services (for example via service / service_prefix), this meant that we did not show them certain buttons required to create/edit the intentions for this specific service.
This PR adds that extra permissions check so we now check the intentions permissions per service instead of using the 'global' "can I edit intentions" question/request.
**Notes:**
- If a HTML button is `disabled` this means tippy.js doesn't adopt the
popover properly and subsequently hide it from the user, so aswell as
just disabling the button so you can't active the popover, we also don't
even put the popover on the page
- If `ability.item` or `ability.item.Resources` are empty then assume no access
**We don't try to disable service > right hand side intention actions here**
Whether you can create intentions for a service depends on the
_destination_ of the intention you would like to create. For the
topology view going from the LHS to the center, this is straightforwards
as we only need to know the permissions for the central service, as when
you are going from the LHS to the center, the center is the
_destination_.
When going from the center to the RHS the _destination[s]_ are on the
RHS. This means we need to know the permissions for potentially 1000s of
services all in one go in order to know when to show a button or not.
We can't realistically discover the permissions for service > RHS
services as we'd have either make a HTTP request per right hand service,
or potentially make an incredibly large POST request for all the
potentially 1000s of services on the right hand side (more preferable to
1000s of HTTP requests).
Therefore for the moment at least we keep the old functionality (thin client)
for the middle to RHS here. If you do go to click on the button and you
don't have permissions to update the intention you will still not be
able to update it, only you won't know this until you click the button
(at which point you'll get a UI visible 403 error)
Note: We reversed the conditional here between 1.10 and 1.11
So this make 100% sense that the port is different here to 1.11
Previously we had "Open metrics Dashboard" and "Configure metrics
dashboard" in the topology cards and then we had "Open Dashboard" in the
top nav when the dashboard was configured.
Now we use "Open dashboard" and "Configure dashboard".
This change was made for consistency in wording and casing. In addition,
the dashboard could be used for metrics but also other dashboards so
there's no need to scope it only to metrics. Also the config is:
```hcl
ui_config {
dashboard_url_templates
}
```
Which does not mention metrics
* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
This commit addresses some left over admin partition FIXMEs
1. Adds Partition correctly to Service Instances
2. Converts non-important 'we can do this later' FIXMEs to TODOs
3. Removes some FIXMEs that I've double checked and addressed.
Most of the remaining FIXMEs I'm waiting on responses to questions from
the consul core folks for. I'll address those in a separate PR.
Our DataSource came in very iteratively, when we first started using it we specifically tried not to use it for things that would require portions of the @src="" attribute to be URL encoded (so things like service names couldn't be used, but dc etc would be fine). We then gradually added an easy way to url encode the @src="" attributes with a uri helper and began to use the DataSource component more and more. This meant that some DataSource usage continued to be used without our uri helper.
Recently we hit #10901 which was a direct result of us not encoding @src values/URIs (I didn't realise this was one of the places that required URL encoding) and not going back over things to finish things off once we had implemented our uri helper, resulting in ~half of the codebase using it and ~half of it not.
Now that almost all of the UI uses our DataSource component, this PR makes it even harder to not use the uri helper, by wrapping the string that it requires in a private URI class/object, that is then expected/asserted within the DataSource component/service. This means that as a result of this PR you cannot pass a plain string to the DataSource component without seeing an error in your JS console, which in turn means you have to use the uri helper, and it's very very hard to not URL encode any dynamic/user provided values, which otherwise could lead to bugs/errors similar to the one mentioned above.
The error that you see when you don't use the uri helper is currently a 'soft' dev time only error, but like our other functionality that produces a soft error when you mistakenly pass an undefined value to a uri, at some point soon we will make these hard failing "do not do this" errors.
Both of these 'soft error' DX features have been used this to great effect to implement our Admin Partition feature and these kind of things will minimize the amount of these types of bugs moving forwards in a preventative rather than curative manner. Hopefully these are the some of the kinds of things that get added to our codebase that prevent a multitude of problems and therefore are often never noticed/appreciated.
Additionally here we moved the remaining non-uri using DataSources to use uri (that were now super easy to find), and also fixed up a place where I noticed (due to the soft errors) where we were sometimes passing undefined values to a uri call.
The work here also led me to find another couple of non-important 'bugs' that I've PRed already separately, one of which is yet to be merged (#11105), hence the currently failing tests here. I'll rebase that once that PR is in and the tests here should then pass 🤞
Lastly, I didn't go the whole hog here to make DataSink also be this strict with its uri usage, there is a tiny bit more work on DataSink as a result of recently work, so I may (or may not) make DataSink equally as strict as part of that work in a separate PR.
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
* Create and use collapsible notices
* Refactor collapsible-notices
* Split up the topology acceptance tests
* Add acceptance tests for tproxy notices
* Add component file
* Adds additional TProxy notices tests
* Adds conditional to only show collapsable if more than 2 notices are present
* Adds changelog
* Refactorting the conditonal for collapsing the notices
* Renaming undefinedIntention to be notDefinedIntention
* Refactor tests
When the Consul serf health check is failing, this means that the health checks registered with the agent may no longer be correct. Therefore we show a notice to the user when we detect that the serf health check is failing both for the health check listing for nodes and for service instances.
There were a few little things we fixed up whilst we were here:
- We use our @replace decorator to replace an empty Type with serf in the model.
- We noticed that ServiceTags can be null, so we replace that with an empty array.
- We added docs for both our Notice component and the Consul::HealthCheck::List component. Notice now defaults to @type=info.
* Add inline-code CSS component
* Add %inline-code to all the places where we need it
* Inject selected env variables into the translations file
* Add ingress gateway upstream 'host header' intro text
* Make sure we can use actual correct component casing for titles but still have nice consistent menu item casing in the side nav
* Add before and after skip links portals
* Move EmptyState and ErrorState to use a @login action/function
* Move page title setting to the Route component
* Add Routes and Outlets everywhere, and use those to access login modal
* Add some aria-labels to the modals
* Docs
* Remove the label/input now we no longer need it, fixup pageobject
* Add basic modal docs
* Switch out old toggle names for ids
* Wrap nspace Route template in a Route component
* type > class
* Add Routlet service and Route Component
* Add ember-assign-helper (already an indirect dependency)
* Use EventListeners for is-href instead of observing
* Don't include :active in '-intent' styles
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
We've always had this idea of being able to markup up information
semantically without thinking about what it should look like, then
applying our %h* placeholder styles to control what the information
should look like.
Back when we originally made our set of %h* placeholders, we tried to
follow Structure as much as possible, which defined the largest header
(which we thought would have been the h1 style) as a super large 3.5rem.
Therefore we made our set of %h* placeholders the same as Structure
beginning at a huge 3.5 size. We then re-overwrote those sizes only in
Consul specific CSS files thinking that this was due to us existing
before Structure did.
Lately we saw an extra clue in Structure - the extra large 3.5 header was
called 'h0'.
This commit moves all our headers to use a zero based scale, and
additionally uses our 3 digit scale as opposed to 1 digit (h1 vs h100),
similar to our color scales (note we don't use a hypen, which we can
alter later if need be), which means we can insert additional h150 etc
if need be.
Additional we stop styling our headers globally (h1 { @extend %h100; }
). This means there is no reason not to use headers for marking up
content depending on what it is rather than what it should look like,
and as a consequence means we can be more purposeful in ordering h*
tags.
Lastly, we use the new scale over the entire codebase and update a
couple of places where we were using using header tags due to what the
styleing for them looked like rather than what the meaning/order was.
Adds a 'status' for the filtering/searching in the UI, without this its not super clear that you are filtering a recordset due to the menu selections being hidden once closed. You can also use the pills in this status view to delete individual filters.
* ui: Keep track of existing intentions and use those to save changes
Previously we risked overwriting existing data in an intention if we
tried to save an intention without having loaded it first, for example
Description and Metadata would have been overwritten.
This change loads in all the intentions for an origin service so we can
pick off the one we need to save and change to ensure that we don't
overwrite any existing data.
* Rename a model attr to not be overwritten by ember-data
* Make sure we can click on the instances
* Make sure we can click back to the preevious page, not root
* Add a forwards/back/forwards navigation test for service instances
* Rename a model attr to not be overwritten by ember-data
Co-authored-by: John Cowen <jcowen@hashicorp.com>
* ui: Add EmptyState for exposed paths, plus additional details
1. Add the port to the combined address
2. Use the proxy address for the ip address used
* Convert to glimmer component
* Add spaces to ListenerPort and LocalPathPort Tooltips
* ui: Remove all vestiges of role=tabpanel
* Switch out tablist role for a label, default to Secondary
* Move healthcheckout-output headers to h2, ideally these would be outside the component
* Add aria-label for empty button
* Fix up non-unique ids in topology component
* Temporarily fixup h2 in KV > LockSession
* Fixup dl with no dt
* h3 > h2
* Fix up page objects that were reliant on ids
* Use DataLoader errors for Service Detail and Service Instance
* uiCfg > config use the repo-like async interface where possible
* Clean up node show
* Make sure you can put `=` in dev cookie values
* Never default to default
* Tweak chain variable
* Remove env service
* Pass chain through to the template for the tempalte to clean it up
* Delete controller tests
* Remove cleanup in Nodes show as this is still being used in another tab
* Use dc.Local
* Add service collections to get all ExternalServices
* Add a basic collection helper
* Use the collections to get all ExternalSources
* Remove old Controllers
* Switch upstream-instances to use new style of searchable
* Add search action to DataCollection plus basic README
* Use DataCollection for PowerSelect searching in child-selectors
* Remove old style filterable search for role/policies and instances
* Remove old helpers/components related to search/sort/filter
* Model layer changes to turn Node:ServiceInstances into hasMany
We tried to make something that feels a little like ember-data yet
not leave our approach of re-shaping the JSON directly from the
response.
1. We added transformHasManyResponse for re-shaping JSON for hasMany
relationships. we avoided the normalize word as ember-data serialize
methods usually return something JSON:API shaped and we distinctly don't
want to do that. Transform was the best word we could think of.
2. The integration tests across all of our models here feel very much
like those types of tests that aren't really testing much, or assert
too much to an extent that they get in the way rather than be of any
use. I'd very much like to move a lot of this to unit tests. Currently
most of the fingerprinting functionality is unit tested and these
integration tests were originally to give confidence that IDs and
related properties were being added correctly.
3. We've added a hasMany relationship, but not the corresponding
belongsTo - yet at least. We don't require the belongsTo right now, and
if we do we can add it later.
* Integrate ServiceInstance search bar for Node:ServiceInstances
* Hide Node.Meta when on the Node:ServiceINstance page
We use a little string replace hack here for a human-like label, this is
soon to be replaced with proper i10n replacement
* Always ensure that a Namespace is set, and add comment explaining
* Refactor Stats and Series components
* Refactor metrics error message for ingress-gateway
* Fix upLines icon positioning
* Remove unused variable from being passed down to Stats
chinmaym07