Commit Graph

15 Commits

Author SHA1 Message Date
John Cowen 98aac0855c
ui: Configure routes in route config rather than classes (#11900) 2022-01-05 09:34:28 +00:00
John Cowen 1779246257
ui: Fix URL params decoding (#11931)
* ui: Move wildcard param decoding to routlet service
2022-01-04 16:08:06 +00:00
John Cowen a34bf96559
ui: Remove any route level auth checks (#11891) 2021-12-21 07:51:52 +00:00
John Cowen 91383269b9
ui: Move nspace CRUD to use the same approach as partitions (#11633)
This sounds a bit 'backwards' as the end goal here is to add an improved UX to partitions, not namespaces. The reason for doing it this way is that Namespaces already has a type of 'improved UX' CRUD in that it has one to many relationship in the form when saving your namespaces (the end goal for partitions). In moving Namespaces to use the same approach as partitions we:

- Ensure the new approach works with one-to-many forms.
- Test the new approach without writing a single test (we already have a bunch of tests for namespaces which are now testing the approach used by both namespaces and partitions)

Additionally:

- Fixes issue with missing default nspace in the nspace selector
- In doing when checking to see that things where consistent between the two, I found a few little minor problems with the Admin Partition CRUD so fixed those up here also.
- Removed the old style Nspace notifications
2021-12-01 11:04:02 +00:00
John Cowen 569c92c10c
ui: Improve dev-time SSO/OIDC visibility (#11248)
This commit tries to make the development experience of working on our OIDC support a little more realistic, essentially by creating our own OIDC provider in our application (only during development builds). You can still provide a real OIDC provider to work with via our dev time environment/cookie variables as before, just now we default to the behaviour in this commit. Overall this makes it much easier to verify our OIDC support in the UI, and also opens up avenues for us to be able to test more scenarios that we couldn't before (for example not only successful logins, but also erroneous, potentially with multiple error reasons).
2021-10-11 16:03:59 +01:00
John Cowen 93b78aee53
ui: Adds initial CRUD for partitions (#11188)
* Add `is` and `test` helpers in a similar vein to `can`

Adds 2 new helpers in a similar vein to ember-cans can:

- `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability.
- `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined.

* Adds TextInput component + related modifiers/helpers/machines/services (#11189)

Adds a few new components/modifiers/helpers to aid building forms.

- state-chart helper, used in lieu of a more generic approach for requiring our statecharts.
- A few modifications to our existing disabled modifier.
- A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this.
- A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date.

Documentation is included for all of ^

* ui: Adds initial CRUD for partitions (#11190)

Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application.

New components:

- Consul::Partition::Form
- Consul::Partition::List
- Consul::Partition::Notifications
- Consul::Partition::SearchBar
- Consul::Partition::Selector

See additional documentation here for more details

New Route templates:

- index.hbs partition listing/searching/filtering
- edit.hbs partition editing and creation

Additionally:

There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site.

Our softDelete functionality has been DRYed out a little to be used across two repos.

isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components.

* ui: Exclude all debug-like files from the build (#11211)

This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
2021-10-08 16:29:30 +01:00
John Cowen 1b9586b65e
ui: Address some Admin Partition FIXMEs (#11057)
This commit addresses some left over admin partition FIXMEs

1. Adds Partition correctly to Service Instances
2. Converts non-important 'we can do this later' FIXMEs to TODOs
3. Removes some FIXMEs that I've double checked and addressed.

Most of the remaining FIXMEs I'm waiting on responses to questions from
the consul core folks for. I'll address those in a separate PR.
2021-10-01 11:07:58 +01:00
John Cowen 51149cdae2
ui: Remove legacy ACLs (#11096) 2021-09-22 18:32:51 +01:00
John Cowen eeb04ae436
ui: Partitions Application Layer (#11017)
* Add Partition to all our models

* Add partitions into our serializers/fingerprinting

* Make some amends to a few adapters ready for partitions

* Amend blueprints to avoid linting error

* Update all  our repositories to include partitions, also

Remove enabled/disable nspace repo and just use a nspace with
conditionals

* Ensure nspace and parition parameters always return '' no matter what

* Ensure data-sink finds the model properly

This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more

* Add all the new partition data layer

* Add a way to set the title of the page from inside the route

and make it accessibile via a route announcer

* Make the Consul Route the default/basic one

* Tweak nspace and partition abilities not to check the length

* Thread partition through all the components that need it

* Some ACL tweaks

* Move the entire app to use partitions

* Delete all the tests we no longer need

* Update some Unit tests to use partition

* Fix up KV title tests

* Fix up a few more acceptance tests

* Fixup and temporarily ignore some acceptance tests

* Stop using ember-cli-page-objects fillable as it doesn't seem to work

* Fix lint error

* Remove old ACL related test

* Add a tick after filling out forms

* Fix token warning modal

* Found some more places where we need a partition var

* Fixup some more acceptance tests

* Tokens still needs a repo service for CRUD

* Remove acceptance tests we no longer need

* Fixup and "FIXME ignore" a few tests

* Remove an s

* Disable blocking queries for KV to revert to previous release for now

* Fixup adapter tests to follow async/function resolving interface

* Fixup all the serializer integration tests

* Fixup service/repo integration tests

* Fixup deleting acceptance test

* Fixup some ent tests

* Make sure nspaces passes the dc through for when thats important

* ...aaaand acceptance nspaces with the extra dc param
2021-09-15 19:50:11 +01:00
John Cowen 7083c39b96
ui: Support Route optional parameters/segments (#10212)
Moves our URLs with 'optional namespace segment' into a separately abstracted 'optional URL segment' feature
2021-05-26 17:43:46 +01:00
John Cowen 887d8038b1
ui: Implement ACLs access based on ACLs (#9835)
Adds restrictions to everything within the ACLs (and nspaces) area based on your ACLs (including readonly views etc.)
2021-03-11 09:29:11 +00:00
John Cowen fbbdc4d352
ui: DataSource Decorator (#9746)
We use a `<DataSource @src={{url}} />` component throughout our UI for when we want to load data from within our components. The URL specified as the `@src` is used to map/lookup what is used in to retrieve data, for example we mostly use our repository methods wrapped with our Promise backed `EventSource` implementation, but DataSource URLs can also be mapped to EventTarget backed `EventSource`s and native `EventSource`s or `WebSockets` if we ever need to use those (for example these are options for potential streaming support with the Consul backend).

The URL to function/method mapping previous to this PR used a very naive humongous `switch` statement which was a temporary 'this is fine for the moment' solution, although we'd always wanted to replace with something more manageable.

Here we add `wayfarer` as a dependency - a very small (1kb), very fast, radix trie based router, and use that to perform the URL to function/method mapping.

This essentially turns every `DataSource` into a very small SPA - change its URL and the view of data changes. When the data itself changes, either the yielded view of data changes or the `onchange` event is fired with the changed data, making the externally sourced view of data completely reactive.

```javascript
// use the new decorator a service somewhere to annotate/decorate
// a method with the URL that can be used to access this method
@dataSource('/:ns/:dc/services')
async findAllByDatacenter(params) {
  // get the data
}

// can use with JS in a route somewhere
async model() {
  return this.data.source(uri => uri`/${nspace}/${dc}/services`)
}
```

```hbs
{{!-- or just straight in a template using the component --}}
<DataSource @src="/default/dc1/services" @onchange="" />
```

This also uses a new `container` Service to automatically execute/import certain services yet not execute them. This new service also provides a lookup that supports both standard ember DI lookup plus Class based lookup or these specific services. Lastly we also provide another debug function called DataSourceRoutes() which can be called from console which gives you a list of URLs and their mappings.
2021-02-23 08:56:42 +00:00
John Cowen dc183b1786
ui: Restrict the viewing/editing of certain UI elements based on the users ACLs (#9687)
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
2021-02-19 16:42:16 +00:00
John Cowen 7d8ea08da7
ui: Add 'Search Across' for finer grained searching (#9282) 2020-12-01 15:45:09 +00:00
John Cowen c98130cc08
ui: Move to Workspaced Structure (#8994)
* ui: Add the most basic workspace root in /ui

* We already have a LICENSE file in the repository root

* Change directory path in build scripts ui-v2 -> ui

* Make yarn install flags configurable from elsewhere

* Minimal workspace root makefile

* Call the new docker specific target

* Update yarn in the docker build image

* Reconfigure the netlify target and move to the higher makefile

* Move ui-v2 -> ui/packages/consul-ui

* Change repo root to refleect new folder structure

* Temporarily don't hoist consul-api-double

* Fixup CI configuration

* Fixup lint errors

* Fixup Netlify target
2020-10-21 15:23:16 +01:00