Commit Graph

47 Commits

Author SHA1 Message Date
Daniel Nephin 27c38bfebb
Merge pull request #9213 from hashicorp/dnephin/resolve-tokens-take-2
acl: Remove some unused things and document delegate method
2021-01-06 18:51:51 -05:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
Daniel Nephin b9306d8827 acl: remove a test-only method 2020-11-17 18:16:34 -05:00
Matt Keeler 1f40f51a58
Fix a bunch of linter warnings 2020-11-09 09:22:12 -05:00
freddygv 21c4708fe9 Add topology ACL filter 2020-10-05 10:24:50 -06:00
André Cruz 673bd69f36
Decrease test flakiness
Fix flaky TestACLResolver_Client/Concurrent-Token-Resolve and TestCacheNotifyPolling
2020-08-24 20:30:02 +01:00
Daniel Nephin 80ff174880 testutil: NewLogBuffer - buffer logs until a test fails
Replaces #7559

Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case.

Attaching log output from background goroutines also cause data races.  If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race.

The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long.

This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful.

All of the logs are printed from the test goroutine, so they should be associated with the correct test.

Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly.

Related:
https://github.com/golang/go/issues/38458 (may be fixed in go1.15)
https://github.com/golang/go/issues/38382#issuecomment-612940030
2020-07-21 12:50:40 -04:00
Daniel Nephin 8b6036c077 Remove ACLsEnabled from delegate interface
In all cases (oss/ent, client/server) this method was returning a value from config. Since the
value is consistent, it doesn't need to be part of the delegate interface.
2020-07-03 17:00:20 -04:00
Daniel Nephin 1ef8279ac9
Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4
ci: enable SA4006 staticcheck check and add ineffassign
2020-06-17 12:16:02 -04:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin 5f24171f13 ci: enable SA4006 staticcheck check
And fix the 'value not used' issues.

Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
2020-06-16 13:10:11 -04:00
Matt Keeler cdc4b20afa
ACL Node Identities (#7970)
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).

Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
2020-06-16 12:54:27 -04:00
Hans Hasselberg 7404712854
acl: do not resolve local tokens from remote dcs (#8068) 2020-06-09 21:13:09 +02:00
R.B. Boyer 16db20b1f3
acl: remove the deprecated `acl_enforce_version_8` option (#7991)
Fixes #7292
2020-05-29 16:16:03 -05:00
Matt Keeler 849eedd142
Fix identity resolution on clients and in secondary dcs (#7862)
Previously this happened to be using the method on the Server/Client that was meant to allow the ACLResolver to locally resolve tokens. On Servers that had tokens (primary or secondary dc + token replication) this function would lookup the token from raft and return the ACLIdentity. On clients this was always a noop. We inadvertently used this function instead of creating a new one when we added logging accessor ids for permission denied RPC requests. 

With this commit, a new method is used for resolving the identity properly via the ACLResolver which may still resolve locally in the case of being on a server with tokens but also supports remote token resolution.
2020-05-13 13:00:08 -04:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler 442924c35a
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Matt Keeler 87c44a3b8d
Ensure that cache entries for tokens are prefixed “token-secret… (#6688)
This will be necessary once we store other types of identities in here.
2019-10-25 13:05:43 -04:00
Matt Keeler a688ea952d
Update the ACL Resolver to allow for Consul Enterprise specific hooks. (#6687) 2019-10-25 11:06:16 -04:00
Matt Keeler 1270a93274
Updates to allow for Namespacing ACL resources in Consul Enterp… (#6675)
Main Changes:

• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.

Secondary Changes:

• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
2019-10-24 14:38:09 -04:00
Matt Keeler f9a43a1e2d
ACL Authorizer overhaul (#6620)
* ACL Authorizer overhaul

To account for upcoming features every Authorization function can now take an extra *acl.EnterpriseAuthorizerContext. These are unused in OSS and will always be nil.

Additionally the acl package has received some thorough refactoring to enable all of the extra Consul Enterprise specific authorizations including moving sentinel enforcement into the stubbed structs. The Authorizer funcs now return an acl.EnforcementDecision instead of a boolean. This improves the overall interface as it makes multiple Authorizers easily chainable as they now indicate whether they had an authoritative decision or should use some other defaults. A ChainedAuthorizer was added to handle this Authorizer enforcement chain and will never itself return a non-authoritative decision.

* Include stub for extra enterprise rules in the global management policy

* Allow for an upgrade of the global-management policy
2019-10-15 16:58:50 -04:00
Aestek 04a52a967b acl: allow service deregistration with node write permission (#5217)
With ACLs enabled if an agent is wiped and restarted without a leave
it can no longer deregister the services it had previously registered
because it no longer has the tokens the services were registered with.
To remedy that we allow service deregistration from tokens with node
write permission.
2019-06-27 14:24:34 +02:00
R.B. Boyer 5a505c5b3a acl: adding support for kubernetes auth provider login (#5600)
* auth providers
* binding rules
* auth provider for kubernetes
* login/logout
2019-04-26 14:49:25 -05:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
R.B. Boyer b3956e511c acl: ACL Tokens can now be assigned an optional set of service identities (#5390)
These act like a special cased version of a Policy Template for granting
a token the privileges necessary to register a service and its connect
proxy, and read upstreams from the catalog.
2019-04-26 14:48:04 -05:00
Jeff Mitchell d3c7d57209
Move internal/ to sdk/ (#5568)
* Move internal/ to sdk/

* Add a readme to the SDK folder
2019-03-27 08:54:56 -04:00
Jeff Mitchell a41c865059
Convert to Go Modules (#5517)
* First conversion

* Use serf 0.8.2 tag and associated updated deps

* * Move freeport and testutil into internal/

* Make internal/ its own module

* Update imports

* Add replace statements so API and normal Consul code are
self-referencing for ease of development

* Adapt to newer goe/values

* Bump to new cleanhttp

* Fix ban nonprintable chars test

* Update lock bad args test

The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.

* Update another test as well

* Bump travis

* Bump circleci

* Bump go-discover and godo to get rid of launchpad dep

* Bump dockerfile go version

* fix tar command

* Bump go-cleanhttp
2019-03-26 17:04:58 -04:00
R.B. Boyer d65008700a
acl: reduce complexity of token resolution process with alternative singleflighting (#5480)
acl: reduce complexity of token resolution process with alternative singleflighting

Switches acl resolution to use golang.org/x/sync/singleflight. For the
identity/legacy lookups this is a drop-in replacement with the same
overall approach to request coalescing.

For policies this is technically a change in behavior, but when
considered holistically is approximately performance neutral (with the
benefit of less code).

There are two goals with this blob of code (speaking specifically of
policy resolution here):

  1) Minimize cross-DC requests.
  2) Minimize client-to-server LAN requests.

The previous iteration of this code was optimizing for the case of many
possibly different tokens being resolved concurrently that have a
significant overlap in linked policies such that deduplication would be
worth the complexity. While this is laudable there are some things to
consider that can help to adjust expectations:

  1) For v1.4+ policies are always replicated, and once a single policy
  shows up in a secondary DC the replicated data is considered
  authoritative for requests made in that DC. This means that our
  earlier concerns about minimizing cross-DC requests are irrelevant
  because there will be no cross-DC policy reads that occur.

  2) For Server nodes the in-memory ACL policy cache is capped at zero,
  meaning it has no caching. Only Client nodes run with a cache. This
  means that instead of having an entire DC's worth of tokens (what a
  Server might see) that can have policy resolutions coalesced these
  nodes will only ever be seeing node-local token resolutions. In a
  reasonable worst-case scenario where a scheduler like Kubernetes has
  "filled" a node with Connect services, even that will only schedule
  ~100 connect services per node. If every service has a unique token
  there will only be 100 tokens to coalesce and even then those requests
  have to occur concurrently AND be hitting an empty consul cache.

Instead of seeing a great coalescing opportunity for cutting down on
redundant Policy resolutions, in practice it's far more likely given
node densities that you'd see requests for the same token concurrently
than you would for two tokens sharing a policy concurrently (to a degree
that would warrant the overhead of the current variation of
singleflighting.

Given that, this patch switches the Policy resolution process to only
singleflight by requesting token (but keeps the cache as by-policy).
2019-03-14 09:35:34 -05:00
R.B. Boyer e9614ee92f
acl: correctly extend the cache for acl identities during resolution (#5475) 2019-03-12 10:23:43 -05:00
Matt Keeler 0c76a4389f
ACL Token Persistence and Reloading (#5328)
This PR adds two features which will be useful for operators when ACLs are in use.

1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)

Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.

Some other secondary changes:

* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid. 
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
2019-02-27 14:28:31 -05:00
Matt Keeler cc2cd75f5c
Fix several ACL token/policy resolution issues. (#5246)
* Fix 2 remote ACL policy resolution issues

1 - Use the right method to fire async not found errors when the ACL.PolicyResolve RPC returns that error. This was previously accidentally firing a token result instead of a policy result which would have effectively done nothing (unless there happened to be a token with a secret id == the policy id being resolved.

2. When concurrent policy resolution is being done we single flight the requests. The bug before was that for the policy resolution that was going to piggy back on anothers RPC results it wasn’t waiting long enough for the results to come back due to looping with the wrong variable.

* Fix a handful of other edge case ACL scenarios

The main issue was that token specific issues (not able to access a particular policy or the token being deleted after initial fetching) were poisoning the policy cache.

A second issue was that for concurrent token resolutions, the first resolution to get started would go fetch all the policies. If before the policies were retrieved a second resolution request came in, the new request would register watchers for those policies but then never block waiting for them to complete. This resulted in using the default policy when it shouldn't have.
2019-01-22 13:14:43 -05:00
Matt Keeler ec9934b6f8 Remaining ACL Unit Tests (#4852)
* Add leader token upgrade test and fix various ACL enablement bugs

* Update the leader ACL initialization tests.

* Add a StateStore ACL tests for ACLTokenSet and ACLTokenGetBy* functions

* Advertise the agents acl support status with the agent/self endpoint.

* Make batch token upsert CAS’able to prevent consistency issues with token auto-upgrade

* Finish up the ACL state store token tests

* Finish the ACL state store unit tests

Also rename some things to make them more consistent.

* Do as much ACL replication testing as I can.
2018-10-31 13:00:46 -07:00
Matt Keeler df507a4a55 A few misc fixes found by go vet 2018-10-19 12:28:36 -04:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Pierre Souchay fd927ea110 BUGFIX: Unit test relying on WaitForLeader() did not work due to wrong test (#4472)
- Improve resilience of testrpc.WaitForLeader()

- Add additionall retry to CI

- Increase "go test" timeout to 8m

- Add wait for cluster leader to several tests in the agent package

- Add retry to some tests in the api and command packages
2018-08-06 19:46:09 -04:00
Pierre Souchay 6dfbbf1350 Updated documentation and adding more test case for async-cache 2018-07-01 23:50:30 +02:00
Pierre Souchay 382bec0897 Added async-cache with similar behaviour as extend-cache but asynchronously 2018-07-01 23:50:30 +02:00
Mitchell Hashimoto 23ee0888ec
agent/consul: convert intention ACLs to testify/assert 2018-06-14 09:41:46 -07:00
Mitchell Hashimoto 6a8bba7d48
agent/consul,structs: add tests for ACL filter and prefix for intentions 2018-06-14 09:41:45 -07:00
James Phillips fcaa889116 Bumps default Raft protocol to version 3. (#3477)
* Changes default Raft protocol to 3.

* Changes numPeers() to report only voters.

This should have been there before, but it's more obvious that this
is incorrect now that we default the Raft protocol to 3, which puts
new servers in a read-only state while Autopilot waits for them to
become healthy.

* Fixes TestLeader_RollRaftServer.

* Fixes TestOperator_RaftRemovePeerByAddress.

* Fixes TestServer_*.

Relaxed the check for a given number of voter peers and instead do
a thorough check that all servers see each other in their Raft
configurations.

* Fixes TestACL_*.

These now just check for Raft replication to be set up, and don't
care about the number of voter peers.

* Fixes TestOperator_Raft_ListPeers.

* Fixes TestAutopilot_CleanupDeadServerPeriodic.

* Fixes TestCatalog_ListNodes_ConsistentRead_Fail.

* Fixes TestLeader_ChangeServerID and adjusts the conn pool to throw away
sockets when it sees io.EOF.

* Changes version to 1.0.0 in the options doc.

* Makes metrics test more deterministic with autopilot metrics possible.
2017-09-25 15:27:04 -07:00
Preetha Appan 8394ad08db Introduce Code Policy validation via sentinel, with a noop implementation 2017-09-25 13:44:55 -05:00
Frank Schröder 44e6b8122d acl: consolidate error handling (#3401)
The error handling of the ACL code relies on the presence of certain
magic error messages. Since the error values are sent via RPC between
older and newer consul agents we cannot just replace the magic values
with typed errors and switch to type checks since this would break
compatibility with older clients.

Therefore, this patch moves all magic ACL error messages into the acl
package and provides default error values and helper functions which
determine the type of error.
2017-08-23 16:52:48 +02:00
Frank Schroeder 1d0bbfed9c
agent: move agent/consul/structs to agent/structs 2017-08-09 14:32:12 +02:00
James Phillips 803ed9a245 Adds secure introduction for the ACL replication token. (#3357)
Adds secure introduction for the ACL replication token, as well as a separate enable config for ACL replication.
2017-08-03 15:39:31 -07:00
Frank Schroeder 50c81a9397 rpc: run agent/consul tests in parallel 2017-07-07 09:22:34 +02:00
Frank Schroeder cd837b0b18 pkg refactor
command/agent/*                  -> agent/*
    command/consul/*                 -> agent/consul/*
    command/agent/command{,_test}.go -> command/agent{,_test}.go
    command/base/command.go          -> command/base.go
    command/base/*                   -> command/*
    commands.go                      -> command/commands.go

The script which did the refactor is:

(
	cd $GOPATH/src/github.com/hashicorp/consul
	git mv command/agent/command.go command/agent.go
	git mv command/agent/command_test.go command/agent_test.go
	git mv command/agent/flag_slice_value{,_test}.go command/
	git mv command/agent .
	git mv command/base/command.go command/base.go
	git mv command/base/config_util{,_test}.go command/
	git mv commands.go command/
	git mv consul agent
	rmdir command/base/

	gsed -i -e 's|package agent|package command|' command/agent{,_test}.go
	gsed -i -e 's|package agent|package command|' command/flag_slice_value{,_test}.go
	gsed -i -e 's|package base|package command|' command/base.go command/config_util{,_test}.go
	gsed -i -e 's|package main|package command|' command/commands.go

	gsed -i -e 's|base.Command|BaseCommand|' command/commands.go
	gsed -i -e 's|agent.Command|AgentCommand|' command/commands.go
	gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/commands.go
	gsed -i -e 's|base\.||' command/commands.go
	gsed -i -e 's|command\.||' command/commands.go

	gsed -i -e 's|command|c|' main.go
	gsed -i -e 's|range Commands|range command.Commands|' main.go
	gsed -i -e 's|Commands: Commands|Commands: command.Commands|' main.go

	gsed -i -e 's|base\.BoolValue|BoolValue|' command/operator_autopilot_set.go
	gsed -i -e 's|base\.DurationValue|DurationValue|' command/operator_autopilot_set.go
	gsed -i -e 's|base\.StringValue|StringValue|' command/operator_autopilot_set.go
	gsed -i -e 's|base\.UintValue|UintValue|' command/operator_autopilot_set.go

	gsed -i -e 's|\bCommand\b|BaseCommand|' command/base.go
	gsed -i -e 's|BaseCommand Options|Command Options|' command/base.go
	gsed -i -e 's|base.Command|BaseCommand|' command/*.go
	gsed -i -e 's|c\.Command|c.BaseCommand|g' command/*.go
	gsed -i -e 's|\tCommand:|\tBaseCommand:|' command/*_test.go
	gsed -i -e 's|base\.||' command/*_test.go

	gsed -i -e 's|\bCommand\b|AgentCommand|' command/agent{,_test}.go
	gsed -i -e 's|cmd.AgentCommand|cmd.BaseCommand|' command/agent.go

	gsed -i -e 's|cli.AgentCommand = new(Command)|cli.Command = new(AgentCommand)|' command/agent_test.go
	gsed -i -e 's|exec.AgentCommand|exec.Command|' command/agent_test.go
	gsed -i -e 's|exec.BaseCommand|exec.Command|' command/agent_test.go
	gsed -i -e 's|NewTestAgent|agent.NewTestAgent|' command/agent_test.go
	gsed -i -e 's|= TestConfig|= agent.TestConfig|' command/agent_test.go
	gsed -i -e 's|: RetryJoin|: agent.RetryJoin|' command/agent_test.go

	gsed -i -e 's|\.\./\.\./|../|' command/config_util_test.go

	gsed -i -e 's|\bverifyUniqueListeners|VerifyUniqueListeners|' agent/config{,_test}.go command/agent.go
	gsed -i -e 's|\bserfLANKeyring\b|SerfLANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go
	gsed -i -e 's|\bserfWANKeyring\b|SerfWANKeyring|g' agent/{agent,keyring,testagent}.go command/agent.go
	gsed -i -e 's|\bNewAgent\b|agent.New|g' command/agent{,_test}.go
	gsed -i -e 's|\bNewAgent|New|' agent/{acl_test,agent,testagent}.go

	gsed -i -e 's|\bAgent\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bBool\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bConfig\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bDefaultConfig\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bDevConfig\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bMergeConfig\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bReadConfigPaths\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bParseMetaPair\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bSerfLANKeyring\b|agent.&|g' command/agent{,_test}.go
	gsed -i -e 's|\bSerfWANKeyring\b|agent.&|g' command/agent{,_test}.go

	gsed -i -e 's|circonus\.agent|circonus|g' command/agent{,_test}.go
	gsed -i -e 's|logger\.agent|logger|g' command/agent{,_test}.go
	gsed -i -e 's|metrics\.agent|metrics|g' command/agent{,_test}.go
	gsed -i -e 's|// agent.Agent|// agent|' command/agent{,_test}.go
	gsed -i -e 's|a\.agent\.Config|a.Config|' command/agent{,_test}.go

	gsed -i -e 's|agent\.AppendSliceValue|AppendSliceValue|' command/{configtest,validate}.go

	gsed -i -e 's|consul/consul|agent/consul|' GNUmakefile

	gsed -i -e 's|\.\./test|../../test|' agent/consul/server_test.go

	# fix imports
	f=$(grep -rl 'github.com/hashicorp/consul/command/agent' * | grep '\.go')
	gsed -i -e 's|github.com/hashicorp/consul/command/agent|github.com/hashicorp/consul/agent|' $f
	goimports -w $f

	f=$(grep -rl 'github.com/hashicorp/consul/consul' * | grep '\.go')
	gsed -i -e 's|github.com/hashicorp/consul/consul|github.com/hashicorp/consul/agent/consul|' $f
	goimports -w $f

	goimports -w command/*.go main.go
)
2017-06-10 18:52:45 +02:00
Renamed from consul/acl_test.go (Browse further)