Commit Graph

36 Commits

Author SHA1 Message Date
Chris S. Kim 0a0319b209
Sync partition fields from enterprise (#11021) 2021-09-13 17:53:52 -04:00
Freddy f399fd2add
Rename CatalogDestinationsOnly (#10397)
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.

This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
2021-06-14 14:15:09 -06:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
Daniel Nephin 5b1c14a95e api: fix mesh config entry tests for default namespace 2021-05-06 13:25:32 -04:00
Daniel Nephin 0e5e1270b6 config-entries: add a test for the API client
Also fixes a bug with listing kind=mesh config entries. ValidateConfigEntryKind was only being used by
the List endpoint, and was yet another place where we have to enumerate all the kinds.

This commit removes ValidateConfigEntryKind and uses MakeConfigEntry instead. This change removes
the need to maintain two separate functions at the cost of creating an instance of the config entry which will be thrown away immediately.
2021-05-04 17:14:21 -04:00
Daniel Nephin bf4c289804 config-entry: remove Kind and Name field from Mesh config entry
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.

In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
2021-04-29 17:11:21 -04:00
Freddy 401f3010e0
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
R.B. Boyer c88512fe14
connect: update centralized upstreams representation in service-defaults (#10015) 2021-04-15 14:21:44 -05:00
freddygv 50c7915156 Convert new tproxy structs in api module into ptrs
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
2021-04-13 12:44:25 -06:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv 4ddf754b6d Fixup test 2021-04-08 11:53:07 -06:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
Freddy 63dcb7fa76
Add TransparentProxy option to proxy definitions 2021-03-17 17:01:45 -06:00
freddygv d90240d367 Restore old Envoy prefix on escape hatches
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
2021-03-15 14:12:57 -06:00
freddygv 7a3625f58b Add TransparentProxy opt to proxy definition 2021-03-11 11:37:21 -07:00
freddygv c30157d2f2 Turn Limits and PassiveHealthChecks into pointers 2021-03-11 11:04:40 -07:00
freddygv 4bbd495b54 Create new types for service-defaults upstream cfg 2021-03-08 22:10:27 -07:00
R.B. Boyer 35c4efd220
connect: support defining intentions using layer 7 criteria (#8839)
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
2020-10-06 17:09:13 -05:00
R.B. Boyer e84c032ea7
api: support GetMeta() and GetNamespace() on all config entry kinds (#8764)
Fixes #8755

Since I was updating the interface, i also added the missing `GetNamespace()`.

Depending upon how you look at it, this is a breaking change since it adds methods to the exported interface `api.ConfigEntry`. Given that you cannot define your own config entry kinds, and all of the machinery of the `api.Client` acts like a factory to construct the canned ones from the rest of the module, this feels like it's not a problematic change as it would only break someone who had reimplemented the `ConfigEntry` interface themselves for no apparent utility?
2020-09-29 09:11:57 -05:00
freddygv 33af8dab9a Resolve conflicts against master 2020-09-11 18:41:58 -06:00
freddygv 60cb306524 Add session flag to cookie config 2020-09-11 18:34:03 -06:00
R.B. Boyer b0bde51e70
connect: all config entries pick up a meta field (#8596)
Fixes #8595
2020-09-02 14:10:25 -05:00
Daniel Nephin 1ef8279ac9
Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4
ci: enable SA4006 staticcheck check and add ineffassign
2020-06-17 12:16:02 -04:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin 5f24171f13 ci: enable SA4006 staticcheck check
And fix the 'value not used' issues.

Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
2020-06-16 13:10:11 -04:00
Chris Piraino bebf1d5df9 Add TLS field to ingress API structs
- Adds test in api and command/config/write packages
2020-05-06 15:12:02 -05:00
Freddy f5c1e5268b
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
Freddy 8a1e53754e
Add config entry for terminating gateways (#7545)
This config entry will be used to configure terminating gateways.

It accepts the name of the gateway and a list of services the gateway will represent.

For each service users will be able to specify: its name, namespace, and additional options for TLS origination.

Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-03-31 13:27:32 -06:00
Kyle Havlovitz 01a23b8eb4
Add config entry/state for Ingress Gateways (#7483)
* Add Ingress gateway config entry and other relevant structs

* Add api package tests for ingress gateways

* Embed EnterpriseMeta into ingress service struct

* Add namespace fields to api module and test consul config write decoding

* Don't require a port for ingress gateways

* Add snakeJSON and camelJSON cases in command test

* Run Normalize on service's ent metadata

Sadly cannot think of a way to test this in OSS.

* Every protocol requires at least 1 service

* Validate ingress protocols

* Update agent/structs/config_entry_gateways.go

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2020-03-31 11:59:10 -05:00
Freddy 5eace88ce2
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer d6456fddeb
connect: introduce ExternalSNI field on service-defaults (#6324)
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.

Setting ExternalSNI will disable mesh gateway use for that target. It also 
disables several service-resolver features that do not make sense for an 
external service.
2019-08-19 12:19:44 -05:00
R.B. Boyer 48f23a6fb6
api: un-deprecate api.DecodeConfigEntry (#6278)
Add clarifying commentary about when it is not safe to use it. Also add
tests.
2019-08-05 17:15:22 -05:00
R.B. Boyer 686e4606c6
do some initial config entry graph validation during writes (#6047) 2019-07-01 15:23:36 -05:00
Paul Banks 078f4cf5bb Add integration test for central config; fix central config WIP (#5752)
* Add integration test for central config; fix central config WIP

* Add integration test for central config; fix central config WIP

* Set proxy protocol correctly and begin adding upstream support

* Add upstreams to service config cache key and start new notify watcher if they change.

This doesn't update the tests to pass though.

* Fix some merging logic get things working manually with a hack (TODO fix properly)

* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway

* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does

* Fix up service manageer and API test failures

* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally

* Remove version.go hack - will make integration test fail until release

* Remove unused code from commands and upstream merge

* Re-bump version to 1.5.0
2019-05-01 16:39:31 -07:00
Matt Keeler ea6cbf01a5 Centralized Config CLI (#5731)
* Add HTTP endpoints for config entry management

* Finish implementing decoding in the HTTP Config entry apply endpoint

* Add CAS operation to the config entry apply endpoint

Also use this for the bootstrapping and move the config entry decoding function into the structs package.

* First pass at the API client for the config entries

* Fixup some of the ConfigEntry APIs

Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well.

Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries.

* Minor API client fixes

* Attempt at some ConfigEntry api client tests

These don’t currently work due to weak typing in JSON

* Get some of the api client tests passing

* Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry

Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing.

* Move MapWalk magic into a binary marshaller instead of JSON.

* Add a MapWalk test

* Get rid of unused func

* Get rid of unused imports

* Fixup some tests now that the decoding from msgpack coerces things into json compat types

* Stub out most of the central config cli

Fully implement the config read command.

* Basic config delete command implementation

* Implement config write command

* Implement config list subcommand

Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output.

* Update command usage

* Update some help usage formatting

* Add the connect enable helper cli command

* Update list command output

* Rename the config entry API client methods.

* Use renamed apis

* Implement config write tests

Stub the others with the noTabs tests.

* Change list output format

Now just simply output 1 line per named config

* Add config read tests

* Add invalid args write test.

* Add config delete tests

* Add config list tests

* Add connect enable tests

* Update some CLI commands to use CAS ops

This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not.

* Fix up the HTTP API CAS tests as I realized they weren’t testing what they should.

* Update config entry rpc tests to properly test CAS

* Fix up a few more tests

* Fix some tests that using ConfigEntries.Apply

* Update config_write_test.go

* Get rid of unused import
2019-04-30 16:27:16 -07:00
Kyle Havlovitz 64174f13d6 Add HTTP endpoints for config entry management (#5718) 2019-04-29 18:08:09 -04:00