Commit Graph

288 Commits

Author SHA1 Message Date
Daniel Nephin 047abdd73c acl: remove ACLDatacenter
This field has been unnecessary for a while now. It was always set to the same value
as PrimaryDatacenter. So we can remove the duplicate field and use PrimaryDatacenter
directly.

This change was made by GoLand refactor, which did most of the work for me.
2021-08-06 18:27:00 -04:00
Chris S. Kim 6341183a84
agent: update proxy upstreams to inherit namespace from service (#10688) 2021-07-26 17:12:29 -04:00
R.B. Boyer 62ac98b564
agent/structs: add a bunch more EnterpriseMeta helper functions to help with partitioning (#10669) 2021-07-22 13:20:45 -05:00
Blake Covarrubias 441a6c9969
Add DNS recursor strategy option (#10611)
This change adds a new `dns_config.recursor_strategy` option which
controls how Consul queries DNS resolvers listed in the `recursors`
config option. The supported options are `sequential` (default), and
`random`.

Closes #8807

Co-authored-by: Blake Covarrubias <blake@covarrubi.as>
Co-authored-by: Priyanka Sengupta <psengupta@flatiron.com>
2021-07-19 15:22:51 -07:00
Daniel Nephin b4ab87111c
Merge pull request #10567 from hashicorp/dnephin/config-unexport-build
config: unexport the remaining builder methods
2021-07-15 12:05:19 -04:00
Daniel Nephin 2ab6be6a88 config: update GRPCPort and addr in runtime config 2021-07-09 12:31:53 -04:00
Daniel Nephin e8e5defc71 config: unexport the remaining builder methods
And remove BuildAndValidate. This commit completes some earlier work to reduce the config
interface a single Load function.

The last remaining test was converted to use Load instad of BuildAndValidate.
2021-07-06 18:42:09 -04:00
Daniel Nephin b4a10443d1 ca: remove unused RotationPeriod field
This field was never used. Since it is persisted as part of a map[string]interface{} it
is pretty easy to remove it.
2021-07-05 19:15:44 -04:00
Daniel Nephin 843e08bb23 testing: fix a test for 32-bit
The hcl decoding apparently uses strconv.ParseInt, which fails to parse a 64bit int.
Since hcl v1 is basically EOl, it seems unlikely we'll fix this in hcl.

Since this test is only about loading values from config files, the extra large number
doesn't seem important. Trim a few zeros from the numbers so that they parse
properly on 32bit platforms.

Also skip a slow test when -short is used.
2021-06-29 16:10:21 -04:00
Freddy f399fd2add
Rename CatalogDestinationsOnly (#10397)
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.

This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
2021-06-14 14:15:09 -06:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
Mark Anderson ac4cb213a1 Fixup agent/config tests
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-05 09:28:17 -07:00
Daniel Nephin 55f620d636
Merge pull request #10155 from hashicorp/dnephin/config-entry-remove-fields
config-entry: remove Kind and Name field from Mesh config entry
2021-05-04 17:27:56 -04:00
Mark Anderson 5f04b6abe2 Convert mode to string representation
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-04 12:41:43 -07:00
Mark Anderson 626b27a874 Continue working through proxy and agent
Rework/listeners, rename makeListener

Refactor, tests pass

Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-04 12:41:43 -07:00
Daniel Nephin bf4c289804 config-entry: remove Kind and Name field from Mesh config entry
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.

In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
2021-04-29 17:11:21 -04:00
Freddy 401f3010e0
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
Tara Tufano b8e7a90f77
add http2 ping health checks (#8431)
* add http2 ping checks

* fix test issue

* add h2ping check to config resources

* add new test and docs for h2ping

* fix grammatical inconsistency in H2PING documentation

* resolve rebase conflicts, add test for h2ping tls verification failure

* api documentation for h2ping

* update test config data with H2PING

* add H2PING to protocol buffers and update changelog

* fix typo in changelog entry
2021-04-09 15:12:10 -04:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
Freddy 63dcb7fa76
Add TransparentProxy option to proxy definitions 2021-03-17 17:01:45 -06:00
Christopher Broglie 94b02c3954 Add support for configuring TLS ServerName for health checks
Some TLS servers require SNI, but the Golang HTTP client doesn't
include it in the ClientHello when connecting to an IP address. This
change adds a new TLSServerName field to health check definitions to
optionally set it. This fixes #9473.
2021-03-16 18:16:44 -04:00
freddygv 7a3625f58b Add TransparentProxy opt to proxy definition 2021-03-11 11:37:21 -07:00
Daniel Nephin af2431793b streaming: default rpc.enable_streaming to true
So that all servers will start the grpc server used by streaming
2021-02-25 14:06:04 -05:00
Daniel Nephin 005702e098 config: rename testCase fields
So that their name better reflects their purpose
2021-02-16 14:40:16 -05:00
Daniel Nephin e6badb3129 config: make TestLoad_IntegrationWithFlags easier to work with
Replace the large table of tests with individual calls to run(). By using
runCase, failure messages will include the line number for the test case, as
well as a line number from the test functions.

Example:
=== FAIL: agent/config TestLoad_IntegrationWithFlags/failing_case (0.01s)
    runtime_test.go:4721: case: failing case
    runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"

Previous:
    runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"

Without the line number to the testCase data, debugging these tests is
difficult. It is impossible to jump directly to the test case, and
difficult to find the location because of many similarly named cases.
2021-02-16 14:40:16 -05:00
Daniel Nephin db53954a3f move test case iteration to caller
To make the test case logic more obvious
2021-02-16 14:40:16 -05:00
Daniel Nephin 7499e38f2b config: remove test cases for impossible scenarios
AEInterval is overridden by NonUserSource, so there is no way for a user
to set this value. These two cases represented impossible real world
scenarios.

Instead the test is replaced with one that shows that the AEInterval can
not be set by config.

This change allows us to remove the hcltail and jsontail fields from
testCase
2021-02-16 14:40:15 -05:00
Daniel Nephin 5f2c358255 Fix error checking
There were two identical if lines, remove one and use a switch/case so the compiler
can catch this problem.
2021-02-16 14:40:15 -05:00
Daniel Nephin 1ff2525cee config: move testing shims to LoadOpts
This will allow us to eventually port these tests to use config.Load instead of
unexported functions.
2021-02-16 14:40:15 -05:00
Daniel Nephin a877ec79b6 Remove patchActual, does not appear to be necessary
also small rename and fix comment
2021-02-16 14:40:15 -05:00
Daniel Nephin fc88c28bb9 config: make config.TestLoad_FullConfig use config.Load
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.

* use separate files in testdata/ dir to store the config source.
  Separate files are much easier to edit because editors can syntax
  highlight json/hcl, and it makes strings easier to find. Previously
  trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
  and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
  nonZero works.
2021-01-27 17:51:53 -05:00
Daniel Nephin aa42ff5d81 config: Unexport Builder and NewBuilder
This type and constructor are implementation details of config loading.
All callers should use config.Load.
2021-01-27 17:41:53 -05:00
Daniel Nephin 08b2039f5a config: replace calls to config.NewBuilder with config.Load
This is another incremental change to reduce config loading to a single
small interface. All calls to NewBuilder can be replaced with Load.
2021-01-27 17:34:43 -05:00
Daniel Nephin bd545963cc config: improve the interface of Load
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.

The three arguments are reduced to a single argument by moving the other
two into the options struct.

The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
2021-01-27 17:34:43 -05:00
Daniel Nephin 78b02663e9 config: Use golden for TestRuntimeConfig_Sanitize
A golden file makes the expected value easier to work with. This change also
removes a number of shims for enterprise and replaces them with a single one
for the golden filename.
2021-01-11 14:34:03 -05:00
Pierre Souchay 70d2da7582
Display a warning when rpc.enable_streaming = true is set on a client (#9530)
* Display a warning when rpc.enable_streaming = true is set on a client

This option has no effect when running as an agent

* Added warning when server starts with use_streaming_backend but without rpc.enable_streaming

* Added unit test
2021-01-08 15:23:23 -05:00
Daniel Nephin d5bdc2f539
Merge pull request #9249 from hashicorp/dnephin/config-tags
config: use fields to detect enterprise-only settings
2021-01-07 19:49:29 -05:00
Daniel Nephin 0679a23921
Merge pull request #9251 from hashicorp/dnephin/config-cleanup-flags-and-opts
config: move testing shims and cleanup some defaults
2021-01-07 19:11:22 -05:00
Daniel Nephin 2d0f33591e config: remove t.Parallel and some unused fields from tests
Use go-cmp for better diffs in tests
2021-01-07 18:57:52 -05:00
Michael Montgomery 5a70c2c7e8 Remove unneeded test 2021-01-04 19:47:13 -06:00
Michael Montgomery a1748aa2cb Merge branch 'master' into 6074-allow-config-MaxHeaderBytes 2020-12-30 14:14:05 -06:00
Michael Montgomery 519f537b8b Fixed failing tests
Removed use of `NewTestAgent`, per review comment
Removed CLI flag, per review comment
Updated website documentation
Added changelog entry
2020-12-30 14:09:50 -06:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
Daniel Nephin 8e783fb37b config: move testing shims to BuilderOpts
And remove the devMode field from builder.

This change helps make the Builder state more explicit by moving inputs to the BuilderOps struct,
leaving only fields that can change during Builder.Build on the Builder struct.
2020-11-20 18:31:10 -05:00
Daniel Nephin fcbdfa393e config: Use LiteralSource for some defaults
Using the LiteralSource makes it much easier to find default values, because an IDE reports
the location of a default. With an HCL string they are harder to discover.

Also removes unnecessary mapstructure.Decodes of constant values.
2020-11-20 18:14:17 -05:00
Michael Montgomery ed719c978b Merge branch 'master' into 6074-allow-config-MaxHeaderBytes 2020-11-20 07:43:53 -06:00
Matt Keeler 4bca029be9
Refactor to call non-voting servers read replicas (#9191)
Co-authored-by: Kit Patella <kit@jepsen.io>
2020-11-17 10:53:57 -05:00
Kit Patella 36aaf86647 Merge branch 'mkcp/telemetry/add-all-metric-definitions' of ssh://github.com/hashicorp/consul into mkcp/telemetry/add-all-metric-definitions 2020-11-16 15:26:12 -08:00
Kit Patella 4c30ebbb73 fix some tests that were broken from the TelemetryConfig change 2020-11-16 15:22:36 -08:00