The test added in this commit shows the problem. Previously the
SigningKeyID was set to the RootCert not the local leaf signing cert.
This same bug was fixed in two other places back in 2019, but this last one was
missed.
While fixing this bug I noticed I had the same few lines of code in 3
places, so I extracted a new function for them.
There would be 4 places, but currently the InitializeCA flow sets this
SigningKeyID in a different way, so I've left that alone for now.
While working on the CA system it is important to be able to run all the
tests related to the system, without having to wait for unrelated tests.
There are many slow and unrelated tests in agent/consul, so we need some
way to filter to only the relevant tests.
This PR renames all the CA system related tests to start with either
`TestCAMananger` for tests of internal operations that don't have RPC
endpoint, or `TestConnectCA` for tests of RPC endpoints. This allows us
to run all the test with:
go test -run 'TestCAMananger|TestConnectCA' ./agent/consul
The test naming follows an undocumented convention of naming tests as
follows:
Test[<struct name>_]<function name>[_<test case description>]
I tried to always keep Primary/Secondary at the end of the description,
and _Vault_ has to be in the middle because of our regex to run those
tests as a separate CI job.
You may notice some of the test names changed quite a bit. I did my best
to identify the underlying method being tested, but I may have been
slightly off in some cases.
As a method on the struct type this would not be safe to call without first checking
c.isIntermediateUsedToSignLeaf.
So for now, move this logic to the CAMananger, so that it is always correct.
We were not adding the local signing cert to the CARoot. This commit
fixes that bug, and also adds support for fixing existing CARoot on
upgrade.
Also update the tests for both primary and secondary to be more strict.
Check the SigningKeyID is correct after initialization and rotation.
Previously we believe it was necessary for all code that required ports
to use freeport to prevent conflicts.
https://github.com/dnephin/freeport-test shows that it is actually save
to use port 0 (`127.0.0.1:0`) as long as it is passed directly to
`net.Listen`, and the listener holds the port for as long as it is
needed.
This works because freeport explicitly avoids the ephemeral port range,
and port 0 always uses that range. As you can see from the test output
of https://github.com/dnephin/freeport-test, the two systems never use
overlapping ports.
This commit converts all uses of freeport that were being passed
directly to a net.Listen to use port 0 instead. This allows us to remove
a bit of wrapping we had around httptest, in a couple places.
In d2ab767fef21244e9fe3b9887ea70fc177912381 raftApply was changed to handle this check in
a single place, instad of having every caller check it. It looks like these few places
were missed when I did that clean up.
This commit removes the remaining resp.(error) checks, since they are all no-ops now.
This function is only ever called from operations that have already acquired the state lock, so checking
the value of state can never fail.
This change is being made in preparation for splitting out a separate type for the secondary logic. The
state can't easily be shared, so really only the expored top-level functions should acquire the 'state lock'.
This commit removes the actingSecondaryCA field, and removes the stateLock around it. This field
was acting as a proxy for providerRoot != nil, so replace it with that check instead.
The two methods which called secondarySetCAConfigured already set the state, so checking the
state again at this point will not catch runtime errors (only programming errors, which we can catch with tests).
In general, handling state transitions should be done on the "entrypoint" methods where execution starts, not
in every internal method.
This is being done to remove some unnecessary references to c.state, in preparations for extracting
types for primary/secondary.
This makes it easier to fake, which will allow me to use the ConsulProvider as
an 'external PKI' to test a customer setup where the actual root CA is not
the root we use for the Consul CA.
Replaces a call to the state store to fetch the clusterID with the
clusterID field already available on the built-in provider.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* remove partition for Checks as it's always use the session partition
* partition sessions index id table
* fix rebase issues
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Support vault auth methods for the Vault connect CA provider
* Rotate the token (re-authenticate to vault using auth method) when the token can no longer be renewed
The TrustDomain is populated from the Host() method which includes the
hard-coded "consul" domain. This means that despite having an empty
cluster ID, the TrustDomain won't be empty.
There are two restrictions:
- Writes from the primary DC which explicitly target a secondary DC.
- Writes to a secondary DC that do not explicitly target the primary DC.
The first restriction is because the config entry is not supported in
secondary datacenters.
The second restriction is to prevent the scenario where a user writes
the config entry to a secondary DC, the write gets forwarded to the
primary, but then the config entry does not apply in the secondary.
This makes the scope more explicit.
The duo of `makeUpstreamFilterChainForDiscoveryChain` and `makeListenerForDiscoveryChain` were really hard to reason about, and led to concealing a bug in their branching logic. There were several issues here:
- They tried to accomplish too much: determining filter name, cluster name, and whether RDS should be used.
- They embedded logic to handle significantly different kinds of upstream listeners (passthrough, prepared query, typical services, and catch-all)
- They needed to coalesce different data sources (Upstream and CompiledDiscoveryChain)
Rather than handling all of those tasks inside of these functions, this PR pulls out the RDS/clusterName/filterName logic.
This refactor also fixed a bug with the handling of [UpstreamDefaults](https://www.consul.io/docs/connect/config-entries/service-defaults#defaults). These defaults get stored as UpstreamConfig in the proxy snapshot with a DestinationName of "*", since they apply to all upstreams. However, this wildcard destination name must not be used when creating the name of the associated upstream cluster. The coalescing logic in the original functions here was in some situations creating clusters with a `*.` prefix, which is not a valid destination.
Fixes an issue described in #10132, where if two DCs are WAN federated
over mesh gateways, and the gateway in the non-primary DC is terminated
and receives a new IP address (as is commonly the case when running them
on ephemeral compute instances) the primary DC is unable to re-establish
its connection until the agent running on its own gateway is restarted.
This was happening because we always preferred gateways discovered by
the `Internal.ServiceDump` RPC (which would fail because there's no way
to dial the remote DC) over those discovered in the federation state,
which is replicated as long as the primary DC's gateway is reachable.
Currently getCARoots could return an empty object with an empty trust
domain before the CA is initialized. This commit returns an error while
there is no CA config or no trust domain.
There could be a CA config and no trust domain because the CA config can
be created in InitializeCA before initialization succeeds.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused func `prefixIndexFromServiceNameAsString`
* fix test error check
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
R.B. Boyer