Commit Graph

24 Commits

Author SHA1 Message Date
Chris Piraino a635e23f86
Restoring config entries updates the gateway-services table (#7811)
- Adds a new validateConfigEntryEnterprise function
- Also fixes some state store tests that were failing in enterprise
2020-05-08 13:24:33 -05:00
Chris Piraino ad8a0544f2
Require individual services in ingress entry to match protocols (#7774)
We require any non-wildcard services to match the protocol defined in
the listener on write, so that we can maintain a consistent experience
through ingress gateways. This also helps guard against accidental
misconfiguration by a user.

- Update tests that require an updated protocol for ingress gateways
2020-05-06 16:09:24 -05:00
Chris Piraino ac115e39b2 A proxy-default config entry only exists in the default namespace 2020-05-06 15:06:14 -05:00
Chris Piraino 9a130f2ccc Remove outdated comment 2020-05-06 15:06:14 -05:00
Kyle Havlovitz 04b6bd637a Filter wildcard gateway services to match listener protocol
This now requires some type of protocol setting in ingress gateway tests
to ensure the services are not filtered out.

- small refactor to add a max(x, y) function
- Use internal configEntryTxn function and add MaxUint64 to lib
2020-05-06 15:06:13 -05:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Freddy c1f79c6b3c
Terminating gateway discovery (#7571)
* Enable discovering terminating gateways

* Add TerminatingGatewayServices to state store

* Use GatewayServices RPC endpoint for ingress/terminating
2020-04-08 12:37:24 -06:00
Freddy 8a1e53754e
Add config entry for terminating gateways (#7545)
This config entry will be used to configure terminating gateways.

It accepts the name of the gateway and a list of services the gateway will represent.

For each service users will be able to specify: its name, namespace, and additional options for TLS origination.

Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-03-31 13:27:32 -06:00
Kyle Havlovitz 01a23b8eb4
Add config entry/state for Ingress Gateways (#7483)
* Add Ingress gateway config entry and other relevant structs

* Add api package tests for ingress gateways

* Embed EnterpriseMeta into ingress service struct

* Add namespace fields to api module and test consul config write decoding

* Don't require a port for ingress gateways

* Add snakeJSON and camelJSON cases in command test

* Run Normalize on service's ent metadata

Sadly cannot think of a way to test this in OSS.

* Every protocol requires at least 1 service

* Validate ingress protocols

* Update agent/structs/config_entry_gateways.go

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2020-03-31 11:59:10 -05:00
Matt Keeler 119168203b
Fix disco chain graph validation for namespaces (#7217)
Previously this happened to be validating only the chains in the default namespace. Now it will validate all chains in all namespaces when the global proxy-defaults is changed.
2020-02-05 10:06:27 -05:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
R.B. Boyer 0675e0606e
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
R.B. Boyer 64fc002e03
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer 4e2fb5730c
connect: detect and prevent circular discovery chain references (#6246) 2019-08-02 09:18:45 -05:00
R.B. Boyer 72a8195839
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
R.B. Boyer a1900754db
digest the proxy-defaults protocol into the graph (#6050) 2019-07-02 11:01:17 -05:00
R.B. Boyer 686e4606c6
do some initial config entry graph validation during writes (#6047) 2019-07-01 15:23:36 -05:00
R.B. Boyer 8850656580
adding new config entries for L7 discovery chain (unused) (#5987) 2019-06-27 12:37:43 -05:00
Matt Keeler 26708570c5
Fix ConfigEntryResponse binary marshaller and ensure we watch the chan in ConfigEntry.Get even when no entry exists. (#5773) 2019-05-02 15:25:29 -04:00
Matt Keeler 3b5d38fb49
Implement config entry replication (#5706) 2019-04-26 13:38:39 -04:00
Kyle Havlovitz 81254deb59 Add RPC endpoints for config entry operations 2019-04-06 23:38:08 -07:00
Kyle Havlovitz 96a460c0cf Clean up service config state store methods 2019-03-27 16:52:38 -07:00
Kyle Havlovitz c2cba68042 Fix fsm serialization and add snapshot/restore 2019-03-20 16:13:13 -07:00
Kyle Havlovitz 9df597b257 Fill out state store/FSM functions and add tests 2019-03-19 15:56:17 -07:00