Commit Graph

79 Commits

Author SHA1 Message Date
Mark Anderson ed3e42296d Fixup acl.EnterpriseMeta
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2022-04-05 15:11:49 -07:00
R.B. Boyer e9230e93d8
xds: adding control of the mesh-wide min/max TLS versions and cipher suites from the mesh config entry (#12601)
- `tls.incoming`: applies to the inbound mTLS targeting the public
  listener on `connect-proxy` and `terminating-gateway` envoy instances

- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
  `connect-proxy` and `ingress-gateway` envoy instances

Fixes #11966
2022-03-30 13:43:59 -05:00
freddygv 8eaca35df1 Account for upstream targets in another DC.
Transparent proxies typically cannot dial upstreams in remote
datacenters. However, if their upstream configures a redirect to a
remote DC then the upstream targets will be in another datacenter.

In that sort of case we should use the WAN address for the passthrough.
2022-02-10 17:01:57 -07:00
freddygv 7fba7456ec Fix race of upstreams with same passthrough ip
Due to timing, a transparent proxy could have two upstreams to dial
directly with the same address.

For example:
- The orders service can dial upstreams shipping and payment directly.
- An instance of shipping at address 10.0.0.1 is deregistered.
- Payments is scaled up and scheduled to have address 10.0.0.1.
- The orders service receives the event for the new payments instance
before seeing the deregistration for the shipping instance. At this
point two upstreams have the same passthrough address and Envoy will
reject the listener configuration.

To disambiguate this commit considers the Raft index when storing
passthrough addresses. In the example above, 10.0.0.1 would only be
associated with the newer payments service instance.
2022-02-10 17:01:57 -07:00
freddygv d5a2eb677f Ensure passthrough addresses get cleaned up
Transparent proxies can set up filter chains that allow direct
connections to upstream service instances. Services that can be dialed
directly are stored in the PassthroughUpstreams map of the proxycfg
snapshot.

Previously these addresses were not being cleaned up based on new
service health data. The list of addresses associated with an upstream
service would only ever grow.

As services scale up and down, eventually they will have instances
assigned to an IP that was previously assigned to a different service.
When IP addresses are duplicated across filter chain match rules the
listener config will be rejected by Envoy.

This commit updates the proxycfg snapshot management so that passthrough
addresses can get cleaned up when no longer associated with a given
upstream.

There is still the possibility of a race condition here where due to
timing an address is shared between multiple passthrough upstreams.
That concern is mitigated by #12195, but will be further addressed
in a follow-up.
2022-02-10 17:01:57 -07:00
freddygv 68dea758dd Add failing test
The updated test fails because passthrough upstream addresses are not
being cleaned up.
2022-01-27 18:56:47 -07:00
R.B. Boyer 05c7373a28 bulk rewrite using this script
set -euo pipefail

    unset CDPATH

    cd "$(dirname "$0")"

    for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
        echo "=== require: $f ==="
        sed -i '/require := require.New(t)/d' $f
        # require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
        # require.XXX(tblah) but not require.XXX(t, blah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
        # require.XXX(rblah) but not require.XXX(r, blah)
        sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
        gofmt -s -w $f
    done

    for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
        echo "=== assert: $f ==="
        sed -i '/assert := assert.New(t)/d' $f
        # assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
        # assert.XXX(tblah) but not assert.XXX(t, blah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
        # assert.XXX(rblah) but not assert.XXX(r, blah)
        sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
        gofmt -s -w $f
    done
2022-01-20 10:46:23 -06:00
R.B. Boyer baf886c6f3
proxycfg: introduce explicit UpstreamID in lieu of bare string (#12125)
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).

For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
2022-01-20 10:12:04 -06:00
freddygv e1d4797561 Account for new upstreams constraint in tests 2021-12-13 18:56:28 -07:00
freddygv ea26a7b7cf Store intention upstreams in snapshot 2021-12-13 18:56:13 -07:00
Freddy eb2b40b22d
Update filter chain creation for sidecar/ingress listeners (#11245)
The duo of `makeUpstreamFilterChainForDiscoveryChain` and `makeListenerForDiscoveryChain` were really hard to reason about, and led to concealing a bug in their branching logic. There were several issues here:

- They tried to accomplish too much: determining filter name, cluster name, and whether RDS should be used. 
- They embedded logic to handle significantly different kinds of upstream listeners (passthrough, prepared query, typical services, and catch-all)
- They needed to coalesce different data sources (Upstream and CompiledDiscoveryChain)

Rather than handling all of those tasks inside of these functions, this PR pulls out the RDS/clusterName/filterName logic.

This refactor also fixed a bug with the handling of [UpstreamDefaults](https://www.consul.io/docs/connect/config-entries/service-defaults#defaults). These defaults get stored as UpstreamConfig in the proxy snapshot with a DestinationName of "*", since they apply to all upstreams. However, this wildcard destination name must not be used when creating the name of the associated upstream cluster. The coalescing logic in the original functions here was in some situations creating clusters with a `*.` prefix, which is not a valid destination.
2021-11-09 14:43:51 -07:00
freddygv ecccf22fd7 Exclude default partition from GatewayKey string
This will behave the way we handle SNI and SPIFFE IDs, where the default
partition is excluded.

Excluding the default ensures that don't attempt to compare default.dc2
to dc2 in OSS.
2021-11-01 14:45:52 -06:00
freddygv 6657c88296 Update locality check in proxycfg 2021-11-01 13:58:53 -06:00
freddygv f3f15640a9 Update mesh gateway proxy watches for partitions
This commit updates mesh gateway watches for cross-partitions
communication.

* Mesh gateways are keyed by partition and datacenter.

* Mesh gateways will now watch gateways in partitions that export
services to their partition.

* Mesh gateways in non-default partitions will not have cross-datacenter
watches. They are not involved in traditional WAN federation.
2021-10-27 09:03:56 -06:00
freddygv 3966677aaf Finish removing useInDatacenter 2021-10-26 23:36:01 -06:00
freddygv ea311d2e47 Configure sidecars to watch gateways in partitions
Previously the datacenter of the gateway was the key identifier, now it
is the datacenter and partition.

When dialing services in other partitions or datacenters we now watch
the appropriate partition.
2021-10-26 23:35:37 -06:00
Paul Banks 5c8702b182 Add support for enabling connect-based ingress TLS per listener. 2021-10-19 20:58:28 +01:00
Paul Banks 8548e15f1b Update proxycfg to hold more ingress config state 2021-09-23 10:08:02 +01:00
freddygv 661f520841 Fixup proxycfg tproxy case 2021-09-16 15:05:28 -06:00
Dhia Ayachi 96d7842118
partition dicovery chains (#10983)
* partition dicovery chains

* fix default partition for OSS
2021-09-07 16:29:32 -04:00
Dhia Ayachi eb19271fd7
add partition to SNI when partition is non default (#10917) 2021-09-01 10:35:39 -04:00
Dhia Ayachi f766b6dff7
oss portion of ent #1069 (#10883) 2021-08-20 12:57:45 -04:00
R.B. Boyer 62ac98b564
agent/structs: add a bunch more EnterpriseMeta helper functions to help with partitioning (#10669) 2021-07-22 13:20:45 -05:00
freddygv b6b42c34dc Add TODOs about partition handling 2021-07-14 22:21:55 -06:00
freddygv a7de87e95b Validate SANs for passthrough clusters and failovers 2021-07-14 22:21:55 -06:00
Daniel Nephin 40ff895927 proxycfg: split state into kind-specific types
This commit extracts all the kind-specific logic into handler types, and
keeps the generic parts on the state struct. This change should make it
easier to add new kinds, and see the implementation of each kind more
clearly.
2021-06-16 14:04:01 -04:00
Daniel Nephin f2ae6cb47c Remove duplicate import
because two PRs crossed paths.
2021-06-16 13:19:54 -04:00
Daniel Nephin b40174ccf2
Merge pull request #9466 from hashicorp/dnephin/proxycfg-state
proxycfg: prepare state for split by kind
2021-06-16 13:14:26 -04:00
Nitya Dhanushkodi 08ed3edf71
proxycfg: Ensure that endpoints for explicit upstreams in other datacenters are watched in transparent mode (#10391)
Co-authored-by: Freddy Vallenilla <freddy@hashicorp.com>
2021-06-15 11:00:26 -07:00
Daniel Nephin b99da95e70 proxycfg: pass context around where it is needed
context.Context should never be stored on a struct (as it says in the godoc) because it is easy to
to end up with the wrong context when it is stored.

Also see https://blog.golang.org/context-and-structs

This change is also in preparation for splitting state into kind-specific handlers so that the
implementation of each kind is grouped together.
2021-06-10 17:34:50 -04:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
freddygv abcfb2aeda Ensure entmeta is encoded in test correlationID 2021-05-05 12:31:23 -06:00
Daniel Nephin 55f620d636
Merge pull request #10155 from hashicorp/dnephin/config-entry-remove-fields
config-entry: remove Kind and Name field from Mesh config entry
2021-05-04 17:27:56 -04:00
Freddy ec38cf3206
Fixup discovery chain handling in transparent mode (#10168)
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>

Previously we would associate the address of a discovery chain target
with the discovery chain's filter chain. This was broken for a few reasons:

- If the upstream is a virtual service, the client proxy has no way of
dialing it because virtual services are not targets of their discovery
chains. The targets are distinct services. This is addressed by watching
the endpoints of all upstream services, not just their discovery chain
targets.

- If multiple discovery chains resolve to the same target, that would
lead to multiple filter chains attempting to match on the target's
virtual IP. This is addressed by only matching on the upstream's virtual
IP.

NOTE: this implementation requires an intention to the redirecting
virtual service and not just to the final destination. This is how
we can know that the virtual service is an upstream to watch.

A later PR will look into traversing discovery chains when computing
upstreams so that intentions are only required to the discovery chain
targets.
2021-05-04 08:45:19 -06:00
Daniel Nephin bf4c289804 config-entry: remove Kind and Name field from Mesh config entry
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.

In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
2021-04-29 17:11:21 -04:00
Freddy 401f3010e0
Rename "cluster" config entry to "mesh" (#10127)
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.

Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
2021-04-28 16:13:29 -06:00
Freddy 6d15569062
Split Upstream.Identifier() so non-empty namespace is always prepended in ent (#10031) 2021-04-15 13:54:40 -06:00
freddygv 36e9326dab Fixup wildcard ent assertion 2021-04-12 17:04:33 -06:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
freddygv ddc6c9b7ca Ensure mesh gateway mode override is set for upstreams for intentions 2021-04-07 09:32:48 -06:00
freddygv 619dc5ede4 Finish resolving upstream defaults in proxycfg 2021-04-07 09:32:48 -06:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
freddygv b56bd690aa Fixup enterprise tests from tproxy changes 2021-03-17 23:05:00 -06:00
freddygv 6c43195e2a Merge master and fix upstream config protocol defaulting 2021-03-17 21:13:40 -06:00
freddygv 3c97e5a777 Update proxycfg for transparent proxy 2021-03-17 13:40:39 -06:00
Daniel Nephin 2a53b8293a proxycfg: use rpcclient/health.Client instead of passing around cache name
This should allow us to swap out the implementation with something other
than `agent/cache` without making further code changes.
2021-03-12 11:46:04 -05:00
Daniel Nephin 410b1261c2 proxycfg: Use streaming in connect state 2021-03-12 11:35:42 -05:00
freddygv e0db834148 Fix text type assertion 2020-09-14 16:28:40 -06:00
R.B. Boyer f2b8bf109c
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00