62d0edbdd4
Merge pull request #1847 from mssola/dc-to-datacenter
...
[proposal] command: deprecated the -dc flag in the agent CLI
2016-07-05 13:01:51 -07:00
c24fe9f8b5
small typo
2016-07-02 01:29:00 -04:00
e9960e6c85
Merge pull request #2137 from hashicorp/f-pq-near
...
Support "near" parameter in prepared query service block
2016-07-01 12:28:48 -07:00
c5c0f225b5
website: add upgrading note for Near param in PQ's
2016-07-01 12:26:14 -07:00
53dc58ff27
website: document near parameter of prepared queries
2016-07-01 11:50:09 -07:00
2dc98dee32
Adds a note about prepared queries to the coordinates internals guide.
2016-06-28 23:02:00 -07:00
055b6973f6
Merge pull request #2123 from hashicorp/f-key-metrics
...
Adds a key metrics section to the telemetry guide.
2016-06-18 04:01:15 +01:00
53f082b2af
Adds a key metrics section to the telemetry guide.
2016-06-17 18:57:42 +01:00
b9eb3b1979
Added an and
2016-06-09 17:05:00 -07:00
a3788d4ede
Update agent.html.markdown
...
The documentation was not clear and I had to try with the cli to figure it out.
2016-06-09 16:48:18 -07:00
832eb77103
Adding more detail about best use case.
2016-06-09 14:29:54 -07:00
6235467a9a
Document `consul lock` shell execution
...
Consul lock executes children under a shell, which was previously
undocumented. Document it, and warn against cases where this can cause
children to leak when the lock is lost.
I have made this a dedicated section so it can easily be removed
later when we move to exec
https://github.com/hashicorp/consul/issues/1692
2016-06-03 17:01:05 -07:00
b862d3f044
add tcp in service/register
...
I found consul /service/register interface supprt TCP check as well.
2016-06-03 19:29:05 +08:00
0871236ca7
Fix typo
...
Simple typo fix.
2016-05-29 10:24:44 -07:00
67b9104daf
Fix the href target for the `/v1/catalog/node/<node>` endpoint.
2016-05-27 00:12:17 -07:00
01798b32b4
Fix typo
2016-05-26 10:46:55 -04:00
a60c0b630a
docs: clarify address specification for telemetry
...
Earlier on this page, under `addresses`, we say "For TCP addresses, these should simply be an IP address without the port. For example: 10.0.0.1, not 10.0.0.1:8500." Since we expect the port to be included for `_address` for telemetry, call it out specifically.
2016-05-24 12:55:23 -07:00
e786aafe70
Fix json for /v1/catalog/node in markdown
...
add in a missing comma after the "Address" field
2016-05-19 14:41:41 -04:00
ffcba3df58
Merge pull request #2028 from hashicorp/f-atomic-kv
...
Adds support for atomic transactions spanning multiple KV entries.
2016-05-15 13:46:05 -07:00
b20f86b4c7
Speling police
2016-05-15 09:13:52 -07:00
c786e1d457
Reduces the number of operations in a transaction to 64.
2016-05-14 21:40:46 -07:00
a11f32a1da
Adds a get-tree verb to KV transaction operations.
2016-05-13 16:57:39 -07:00
77ae55c692
Adds some size limiting features to transactions to help prevent abuse.
2016-05-13 13:39:01 -07:00
5fd99b13ef
Removes null results for deletes, and preps for more than one result from an operation.
2016-05-13 01:47:55 -07:00
2649a6336e
Adds a read-only optimized path for transactions.
2016-05-13 00:34:05 -07:00
6daf26ada4
Adds documentation for the transaction endpoint.
2016-05-11 14:18:47 -07:00
9c10bd0b23
Clarify need for recursors option.
...
Reiterating that the iptables option requires recursors to be set to resolve for any domain besides .consul
2016-04-29 16:45:59 -07:00
aa8dda5149
DNS forwarding with iptables
...
Adding notes on using iptables to forward ports
2016-04-28 23:27:28 -07:00
76b90ccb17
Fixes and clarifies the only_passing docs.
2016-04-27 14:55:38 -07:00
03b0c196e0
Merge pull request #1762 from mshean/script-timeout
...
Add Timeout field to CheckMonitor
2016-04-24 23:08:06 -07:00
b0203278f2
Tweak discussion regarding reaping to advise against adjusting these
...
values.
2016-04-21 14:24:41 -07:00
515a42e733
Fix broken markdown
2016-04-20 18:46:01 -04:00
6182a34600
Merge pull request #1935 from hashicorp/f-reap-time
...
Makes reap time configurable for LAN and WAN.
2016-04-20 13:50:21 -07:00
bc6efbae18
Sets an anti-footgun floor for the configurable reap time.
2016-04-20 13:49:51 -07:00
f232a11291
Update documentation for CheckMonitor timeout
2016-04-20 11:43:49 -07:00
24c2bc44f1
Clarifies default behavior of blank service addresses.
2016-04-20 10:16:06 -07:00
1e9f3341d0
website: mention 4K output limit for checks
2016-04-14 14:35:35 -07:00
07e9c09a58
Merge pull request #1891 from romansky/patch-1
...
clerify RPC usage
2016-04-12 02:10:15 -07:00
86bb36f211
Updates some docs that say reaping is not configurable.
2016-04-11 00:56:03 -07:00
32389a9822
Makes reap time configurable for LAN and WAN.
2016-04-11 00:38:25 -07:00
8156eb9953
Add a note re: pre-0.7 behavior
2016-03-31 18:06:58 -07:00
9eaffc456f
skip_leave_on_int's default changes based on agent mode
...
`skip_leave_on_int`'s behavior now changes based on whether or not the agent is acting as a client or server.
Fixes: 1687
2016-03-31 17:45:14 -07:00
bb17b99dbe
fix correct RPC entity
2016-03-30 12:21:52 +03:00
7603dcfd4b
Reword `udp_answer_limit` for the better.
2016-03-29 23:48:22 -07:00
0bf0f2a1ab
Use industry jargon re: DNS round-robin
...
s/randomized DNS round-robin/round-robin DNS/
2016-03-29 23:07:42 -07:00
64c1c12752
Whitespace, indent markdown correctly
2016-03-29 19:27:36 -07:00
d1166307aa
Trim UDP responses per configuration
2016-03-29 19:27:21 -07:00
f8a0e1fb1a
Merge branch 'b-dns-single-record' of ssh://github.com/hashicorp/consul into b-dns-single-record
...
# Conflicts:
# command/agent/dns.go
2016-03-29 19:24:53 -07:00
a29f6e8c8f
Allow adjusting the number of DNS records in a response...
...
Based on work done by @fusiondog in #1583 , extend the concept to use an integer instead of a boolean.
Fixes : #1583 && #1481
2016-03-29 19:23:56 -07:00
f0c30e8d0f
clerify RPC usage
2016-03-29 15:10:28 +03:00
0f23210628
Fixes JSON in wildcard query example.
2016-03-23 14:33:20 -07:00
7ad0d9789f
Merge pull request #1839 from foxel/patch-1
...
Clarification for advertise_addrs.rpc
2016-03-21 16:14:17 -07:00
5a40caf2a8
Update the docs slightly re: only_passing
...
Signed-off by: @slackpad
2016-03-21 16:07:56 -07:00
85e3590a95
add inline code segment to enableTagOverride
2016-03-20 11:09:12 +08:00
508bc796a8
Allow [::] as a bind address (binds to first public IPv6 address)
2016-03-18 23:59:44 +01:00
314a0913e2
command: deprecated the -dc flag in the agent CLI
...
The `-dc` flag from the agent CLI command has been deprecated in favor of
`-datacenter`. This is done this way because:
- Other CLI commands used `-datacenter`. See: event, exec and watch.
- The agent configuration file uses `datacenter`.
Signed-off-by: Miquel Sabaté Solà <msabate@suse.com>
2016-03-18 15:44:35 +01:00
4c3b2edfed
Fixes a few bugs in the prepared query doc.
2016-03-17 23:42:27 -07:00
0ed56d6606
Adds a note about template query ACLs.
2016-03-17 08:21:58 -07:00
d3bce2b1af
Clarification for advertise_addrs.rpc
...
Clarification for advertise_addrs.rpc as it sets the server RPC port (default 8300)
2016-03-16 12:10:54 +05:00
ec82388e32
Merge pull request #1803 from tylert/doc-enc-update
...
Update agent encryption doc example
2016-03-10 20:06:02 -08:00
ae7b45a6df
Merge pull request #1820 from hashicorp/f-port-docs
...
Adds a reference to the network ports from the security guide.
2016-03-09 21:22:41 -08:00
b2992a5e83
Adds a reference to the network ports from the security page.
2016-03-09 21:21:49 -08:00
8a877c44eb
Fix doc typo
2016-03-09 12:41:49 -08:00
df7f593747
Update agent encryption doc example
2016-03-09 11:18:48 -05:00
f4edb28ef3
Make sure UDP DNS responses aren't larger than allowed
2016-03-07 16:41:17 -08:00
e634e91ae6
Fixes broken example JSON.
2016-03-07 10:45:39 -08:00
275c84a0cc
Renames "debug" endpoint and structures to "explain".
2016-03-07 10:45:39 -08:00
8493640b09
Adds a prepared query debug endpoint.
2016-03-07 10:45:39 -08:00
e6232a21e4
Adds basic docs for prepared query templates.
2016-03-07 10:45:39 -08:00
5dd137056c
Fixes name of new query ACL.
2016-03-04 16:32:53 -08:00
bd4f2ee6b7
Adds a new PUT-based TTL check update endpoint.
2016-03-02 17:54:01 -08:00
ecc617008a
Merge pull request #1777 from hashicorp/b-port-docfix
...
TLS example and correcting error
2016-03-01 13:02:30 -08:00
807769e6bd
Tweaks the address and advertise docs.
2016-03-01 13:01:13 -08:00
72f7c08a0a
Cleans up the documents.
2016-02-24 18:05:58 -08:00
c75256ac8b
Adds a check for users re-submitting the redacted token.
2016-02-24 17:35:26 -08:00
2f7eac8b86
Renames "prepared_query" ACL policy to "query".
2016-02-24 17:02:06 -08:00
0ea990f3d2
Adds an upgrade note about the new ACL behavior.
2016-02-24 01:33:10 -08:00
a8ac27fa49
Refactors docs into a more complete state for prepared query ACLs.
2016-02-23 22:27:44 -08:00
633c231d67
Creates new "prepared-query" ACL type and new token capture behavior.
...
Prior to this change, prepared queries had the following behavior for
ACLs, which will need to change to support templates:
1. A management token, or a token with read access to the service being
queried needed to be provided in order to create a prepared query.
2. The token used to create the prepared query was stored with the query
in the state store and used to execute the query.
3. A management token, or the token used to create the query needed to be
supplied to perform and CRUD operations on an existing prepared query.
This was pretty subtle and complicated behavior, and won't work for
templates since the service name is computed at execution time. To solve
this, we introduce a new "prepared-query" ACL type, where the prefix
applies to the query name for static prepared query types and to the
prefix for template prepared query types.
With this change, the new behavior is:
1. A management token, or a token with "prepared-query" write access to
the query name or (soon) the given template prefix is required to do
any CRUD operations on a prepared query, or to list prepared queries
(the list is filtered by this ACL).
2. You will no longer need a management token to list prepared queries,
but you will only be able to see prepared queries that you have access
to (you get an empty list instead of permission denied).
3. When listing or getting a query, because it was easy to capture
management tokens given the past behavior, this will always blank out
the "Token" field (replacing the contents as <hidden>) for all tokens
unless a management token is supplied. Going forward, we should
discourage people from binding tokens for execution unless strictly
necessary.
4. No token will be captured by default when a prepared query is created.
If the user wishes to supply an execution token then can pass it in via
the "Token" field in the prepared query definition. Otherwise, this
field will default to empty.
5. At execution time, we will use the captured token if it exists with the
prepared query definition, otherwise we will use the token that's passed
in with the request, just like we do for other RPCs (or you can use the
agent's configured token for DNS).
6. Prepared queries with no name (accessible only by ID) will not require
ACLs to create or modify (execution time will depend on the service ACL
configuration). Our argument here is that these are designed to be
ephemeral and the IDs are as good as an ACL. Management tokens will be
able to list all of these.
These changes enable templates, but also enable delegation of authority to
manage the prepared query namespace.
2016-02-23 17:12:43 -08:00
793195b7d8
Update documentation - add Network Ports.
...
Update security.html.markdown add section on Network Port usage.
TODO: add Atlas port usage.
2016-02-23 11:27:15 -08:00
b90e77421a
TLS example and correcting error
...
The example configuration file omits TLS support in the HTTP API. This is fine, but a second example demonstrating how to enable TLS over the HTTP API is harmless and, in fact, should be default practice.
Using the format `ip:port` in the "addresses" block will cause Consul to crash on reload/start. See issue (#1727 )[https://github.com/hashicorp/consul/issues/1727#issuecomment-184980751 ]
2016-02-17 15:24:37 +10:00
a3f49a1f21
Update leader-election.html.markdown
...
Remove duplicate 'leader'
2016-02-14 09:32:23 -05:00
66feca5b5f
Allow adjusting the number of DNS records in a response...
...
Based on work done by @fusiondog in #1583 , extend the concept to use an integer instead of a boolean.
Fixes : #1583 && #1481
2016-02-12 12:18:25 -08:00
48a29b5a31
Fixes a typo.
2016-02-09 16:37:06 -08:00
9fabd05157
Merge pull request #1698 from hashicorp/pr-1547-slackpad
...
Implements WAN address translation.
2016-02-07 14:26:04 -08:00
800910137d
Adds documentation for WAN address translation.
2016-02-07 11:12:19 -08:00
498c8e1d9c
Merge pull request #1609 from kevinsimper/patch-1
...
Updating dns forwarding
2016-02-06 22:21:00 -08:00
4b3dede0fb
Tweaks the telemetry docs.
2016-02-06 22:07:11 -08:00
a599e88507
Merge pull request #1284 from nbrownus/telemetry
...
Option to disable hostnames from telemetry
2016-02-06 22:00:14 -08:00
43a8eb8189
Adds a warning about DoS-ing the cluster with consul exec.
2016-02-05 17:36:19 -08:00
c1c3daed9a
Iterate on the DNS forwarding docs
...
Specifically:
* add Dnsmasq examples for reverse DNS for most of the RFC1918, 5735, and 6598 netblocks.
* Highlight some example options for dnsmasq that are probably of interest.
* Add a small section on reverse DNS testing
* Break out BINDs troubleshooting with Dnsmasq's troubleshooting
Not an exhaustive sweep, but should be helpful when introducing consul to new environments.
2016-02-02 15:06:25 -08:00
541a98c9c7
Option to disable hostnames from telemetry
2016-01-29 13:44:48 -08:00
aa45c07f28
fixing small typo in json
2016-01-29 01:25:23 -08:00
c4860cad7d
Correcting count of checks
...
I saw there were 5 checks listed - script, tcp, http, ttl, docker.
2016-01-19 22:50:27 -05:00
759e535f54
Updating dns forwarding
...
It is not really clear that you only have to do one of the following and not all three.
2016-01-14 22:53:14 +01:00
d79139760a
Fix semaphore typo
2016-01-13 16:56:40 -08:00
e110abee9b
Fix broken link
2016-01-13 19:32:30 -05:00
dc9131a732
Use HTTPS + www. where appropriate
2016-01-13 17:44:01 -05:00
6d35366228
Adds a note about 2X memory provisioning.
2016-01-08 19:15:42 -08:00
6bfc266657
Adds a cautionary note about data fitting into RAM.
2016-01-08 18:49:31 -08:00
55970248bc
Tweaks wording of reap config option section.
2016-01-06 22:29:03 -08:00
6dd0835319
Makes the timeout behavior more intuitive.
...
Previously, it would try once "up to" the timeout, but in practice it would
just fall through. This modifies the behavior to block until the timeout has
been reached.
2016-01-06 09:40:20 -08:00
87dd758199
Defaults monitor retries to 3 retries @ 1s for the consul lock command.
2016-01-05 18:34:22 -08:00
9323276b58
Adds monitor retries to the consul lock command.
2016-01-05 18:22:36 -08:00
3348cf4c0b
Adds "try" support to locks and semaphores.
2016-01-05 18:22:36 -08:00
df361afed5
Merge pull request #1550 from hashicorp/f-devmode
...
Add a `-dev` mode for easy prototyping
2016-01-05 10:01:41 -08:00
f861f35da7
Merge pull request #1549 from kikitux/patch-1
...
[doc] fix identation on statsd_addr
2016-01-02 06:50:56 -08:00
5a72fe2803
Fixing typos in Coordinate documentation.
2015-12-28 16:34:09 -08:00
579a08ec20
website: add docs for dev mode
2015-12-27 09:45:59 -06:00
92f0164f97
fix identation on statsd_addr
...
ditto
2015-12-27 18:19:31 +13:00
0fabf273e6
website: document the static ui flag
2015-12-24 22:21:34 -05:00
e1d456a079
Changes sense of option to "reap" and uses nil for "not set".
2015-12-22 10:28:10 -08:00
1e4aa28c9d
Adds child process reaping when Consul is running as PID 1.
2015-12-21 21:47:35 -08:00
09b1924cce
Tweaks RTT command docs.
2015-12-21 15:16:48 -08:00
9e3c171648
Merge pull request #1522 from sboily/patch-1
...
Update documentation to use consul rtt command with https
2015-12-21 15:14:57 -08:00
43808ca120
Clarifies format of stats aggregator configurations as host:port.
2015-12-18 22:53:55 -08:00
07c058cd04
Update options.html.markdown
...
clarify that setting `acl_default_policy` won't have any effect unless ACL support is also enabled by setting `acl_datacenter`
2015-12-18 14:26:35 -08:00
726fde8e02
Update documentation to use rtt with https
2015-12-17 13:24:42 -05:00
6b82b69da9
Adds a note about the new web UI layout.
2015-12-15 15:17:11 -08:00
d644ede899
Change example filename to use .json instead of .js
...
Since only .json files are loaded using .js as an example here is confusing.
2015-12-08 18:42:32 -08:00
232fc7d5fd
Adds blank line to fix Docker check formatting.
2015-12-08 00:04:55 -08:00
0fb6e9b7f6
Adds some more upgrade notes for Consul 0.6.
2015-12-07 17:58:43 -08:00
07e367972c
Update atlas.html.markdown
...
Fixed minor typo
2015-12-07 17:06:11 +00:00
1ff4357cc5
Updates the version specific instructions for 0.6.0.
2015-12-02 10:32:00 -08:00
3c9e983800
Update health.html.markdown
...
Correct json syntax in example.
2015-11-23 09:39:05 -05:00
ab22325b87
Include 'Service'/'Address' field in example
...
Add the `Service`/`Address` field to the example output for the `/v1/health/service/\<service\>` endpoint.
Even though it's an optional value, this is probably the one consumers are looking for (rather than the `Node` address)
2015-11-23 15:01:24 +01:00
1144846ed0
Fixes a typo in the prepared queries doc.
2015-11-20 21:44:24 -08:00
bcbf6d268e
Removes old logging doc which was empty.
2015-11-18 14:41:50 -08:00
23536f2b97
Adds Docker checks support to client API.
...
Also changed `DockerContainerId` to `DockerContainerID`, and updated the agent
API docs to reflect their support for Docker checks.
2015-11-18 07:40:02 -08:00
dde0d26e18
Fix markdown's markup: 2^(64-1) != 2^(64)-1
2015-11-17 15:21:47 -08:00
9e29bb4238
Adds and updates docs for prepared queries.
2015-11-15 17:06:00 -08:00
26cf0a2974
Extends the session TTL max to 24 hours, and adds a warning to the docs.
2015-11-15 16:51:00 -08:00
1a3c523816
Adds a note about the new acquire behavior into the sessions internals guide.
2015-11-14 10:28:14 -08:00
3d64189bfa
Add DogStatsD configuration options to documentation source
2015-11-11 14:30:37 -05:00
c2fab40aee
Fixes a typo.
2015-10-30 23:50:11 -07:00
1e379f45f0
Some more grammer corrections and formatting to docker check docs
2015-10-28 14:56:55 -07:00
b29a785614
Some changes to the docker check docs
2015-10-28 14:24:03 -07:00
c3cf24d022
Added some docs for the docker check
2015-10-28 14:19:57 -07:00
46021ab4b4
Clarify format of the -atlas agent option.
2015-10-27 14:21:05 -07:00
adf4189707
Mote -> Note typo
2015-10-26 15:10:20 -05:00
b3b1c6940b
Updates docs for network coordinates.
2015-10-23 15:23:01 -07:00
c48e3e1179
Defaults second node to agent if not given. Removes -short option and tweaks output formatting.
2015-10-23 15:23:01 -07:00
a51e170eef
Cleans up after code review, adds a -short option to "consul rtt" command.
2015-10-23 15:23:01 -07:00
43df5c6784
Adds a "consul rtt" command.
2015-10-23 15:23:01 -07:00
3f11bfaea4
Adds coordinate of agent to self endpoint.
2015-10-23 15:23:01 -07:00
a2bcef00a0
Adds endpoints for raw network coordinates.
2015-10-23 15:23:01 -07:00
fecd639b02
Changes ?near=self to a safer ?near=_agent, which is also clearer about what it does.
2015-10-23 15:23:01 -07:00
ee1cf1e13b
Adds distance sorting to health endpoint. Cleans up unit tests.
2015-10-23 15:23:01 -07:00
1724b9a6be
Adds a magic "self" node name to distance queries.
2015-10-23 15:23:01 -07:00
033e8e6625
Adds sort of DCs in catalog queries based on RTT. Cleans up.
...
* Makes the catalog endpoint respect disabling coordinates for all
RTT-sorting query types.
2015-10-23 15:23:01 -07:00
b63909cf67
Adds coordinate sorting support to catalog queries for nodes and service nodes.
2015-10-23 15:23:01 -07:00
d035dbd43b
Merge pull request #1318 from daveadams/f-http-header-token
...
Allow specifying Consul token in an HTTP request header
2015-10-22 13:33:47 -07:00
3500c4781a
Gets rid of LMDB reference in the FAQ.
2015-10-20 13:39:11 -07:00
5f175add40
Add HTTP request header X-Consul-Token
...
Add support for an X-Consul-Token HTTP request header to specify the
token with which this request should be fulfilled. The header would have
precedence over the responding Agent's default token, but would have
lower precedence than a token specified in the query string.
2015-10-19 11:26:01 -05:00
4ec5013811
Updates docs about new "acquire when you already have it" behavior.
2015-10-15 14:59:09 -07:00
b46f878747
Merge pull request #1309 from hashicorp/f-remove-migrate
...
Removes consul-migrate for 0.6
2015-10-15 14:50:19 -07:00
c31ac806f8
website: add note for consul migrate utility.
2015-10-15 14:42:46 -07:00
9d489331e3
Update datacenters.html.markdown
...
Fix GH-1305.
2015-10-15 14:36:54 -04:00
75c21693a8
Make service lookup DNS documentation consistent
2015-09-23 23:16:34 -07:00
ac5af9bcbc
Make node lookup DNS documentation consistent
2015-09-23 23:09:52 -07:00
b25797a808
Merge pull request #1187 from sfncook/enable_tag_drift_03
...
Enable tag drift 03
2015-09-11 15:35:32 -07:00
451abfa206
Doc changes in response to review.
2015-09-11 15:26:30 -07:00
7d6f30da1c
Docs - add verbage to anti-entropy page.
2015-09-11 14:27:54 -07:00
8d733b7fca
remove various typos
2015-09-11 12:29:54 -07:00
7c85d588d5
Update documentation for service definition
2015-09-11 09:32:54 -07:00
c601f64c3f
Fixes a typo in the telemetry docs.
2015-09-02 21:37:31 -07:00
a013095f62
Merge pull request #1167 from railsguru/master
...
Add -http-port option to change the HTTP API port
2015-09-02 01:15:55 -04:00
46e614ae70
Position it alphabetically
2015-09-02 06:28:55 +02:00
e9ee1f9bea
Update agent options section on the website
2015-09-02 05:36:09 +02:00
0f49e1c3a9
Merge pull request #1200 from ryotarai/lock-pass-stdin
...
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-31 21:14:45 -07:00
50914e2388
website: description of -pass-stdin option
2015-09-01 11:00:26 +09:00
2ee887ecc3
Cleanup for guides/forwarding.html
2015-08-30 12:01:49 -04:00
baede06a9e
Explain 'recursors' behavior with an example.
2015-08-28 18:27:26 -07:00
76aa082d5b
add dnsmasq example, add pointer to 'recursors'
2015-08-28 18:10:37 -07:00
10c38f8c3a
website: document precedence of Atlas endpoint inputs
2015-08-27 17:54:56 -07:00
d9210f4a0c
website: document atlas endpoint config
2015-08-27 11:31:29 -07:00
aa30194328
Merge pull request #1199 from hashicorp/f-scada-reload
...
SCADA client is reload-able
2015-08-26 11:46:50 -07:00
e533789088
website: add atlas token/infra to reloadable config
2015-08-25 17:21:29 -07:00
89d03026bc
Clarifies services docs a bit.
2015-08-25 16:12:19 -07:00
c6b4ba12a7
Fixes a typo in the event docs, and twiddles the formatting.
2015-08-13 17:26:41 -07:00
92b86f0631
Added detail about left/failed nodes and 72h reaping
...
Ref: https://groups.google.com/forum/#!searchin/consul-tool/left/consul-tool/KVl0u91uCdw/bfzrUO4r-1QJ
2015-08-06 17:37:48 -07:00
49181fce76
website: fix broken link on acl page
2015-07-31 12:14:28 -07:00
2017c95d13
Merge pull request #1130 from pdf/check_socket
...
Add Socket check type
2015-07-27 14:21:24 -07:00
403b42af99
Document `TCP` check type
2015-07-27 10:53:52 +10:00
d7f76702fe
website: docs for keyring ACLs
2015-07-07 11:45:49 -06:00
503fa1eed1
Merge pull request #1046 from hashicorp/f-event-acl
...
Event ACLs
2015-07-02 07:02:07 -07:00
efc2d316c1
Minor improvement to `acl_master_token` docs
...
Confirm the expected format, and what happens if not provided.
2015-07-01 15:34:35 -04:00
cb0043e8f8
website: adding tag/service name dns compliance docs
2015-06-25 09:08:38 -07:00
715f69cce8
Merge pull request #1004 from i0rek/advertise_addrs
...
Add advertise_addrs.
2015-06-23 12:32:07 -07:00
4598087df3
Implement advertise_addrs for SerfLan, SerfWan and RPC.
...
Fixes #550 .
This will make it possible to configure the advertised adresses for
SerfLan, SerfWan and RPC. It will enable multiple consul clients on a
single host which is very useful in a container environment.
This option might override advertise_addr and advertise_addr_wan
depending on the configuration.
It will be configureable with advertise_addrs. Example:
{
"advertise_addrs": {
"serf_lan": "10.0.120.91:4424",
"serf_wan": "201.20.10.61:4423",
"rpc": "10.20.10.61:4424"
}
}
2015-06-23 21:23:45 +02:00
d893a60534
website: document -token parameter for exec/event commands
2015-06-22 17:19:07 -07:00
d529329944
website: link to check pass/fail endpoint docs from checks page
2015-06-22 10:21:50 -07:00
457cff1007
website: fix event acl policy docs
2015-06-19 12:18:09 -07:00
e0ce6059f6
website: add docs for user event acls
2015-06-18 18:13:29 -07:00
9de7d95109
website: fix mention of read-only policy for service acls
2015-06-18 18:13:01 -07:00
faab022f89
website: document passing ACL tokens in catalog register/deregister
2015-06-15 11:45:30 -07:00
cdc00dc606
Wording.
2015-06-12 16:09:44 +02:00
1bac706593
Make behaviour of keyprefixes always matching all keys in a prefix more clear.
2015-06-12 16:07:42 +02:00
a8b5b980e8
website: add a note in the upgrade notes for 0.6 discovery ACLs
2015-06-11 17:48:08 -07:00
62a8d82f9f
website: add note about anonymous token and discovery ACLs
2015-06-11 17:39:01 -07:00
c09dfe05a7
website: document service discovery ACLs
2015-06-11 14:45:52 -07:00
cf21fb1d0c
website: document TTL check persistence
2015-06-05 17:15:57 -07:00
be68db0136
Clarify how intervals are parsed
...
Current docs only show second intervals and do not specify
other valid options, this commit specifically outlines how the times are
parsed.
2015-06-03 12:53:09 -05:00
b8fad5c0ad
Update upgrade instructions for 0.5.2
...
The docs were confusing as to whether or not 0.5.2 includes the migration tool, which it does. This edit should make it more clear for the end user
2015-06-02 13:02:35 -05:00
9d6af83fa4
fix typo
2015-06-01 08:34:54 -05:00
b6e31a2e6f
website: add status field for check registration in http docs
2015-05-28 13:09:33 -07:00
90f8c91761
website: document setting initial status of health checks in config
2015-05-28 13:03:01 -07:00
b6151768dd
website: be explicit about grace period in lock command
2015-05-28 12:24:32 -07:00
2c9592c5ee
consul: lower default query time and add small stagger
2015-05-14 17:59:43 -07:00
6e1e85036f
Typo fix
2015-05-12 15:54:32 -04:00
97c87f4e4d
website: document the new TLS changes
2015-05-11 16:22:10 -07:00
dfbd466c71
Adding docs about configuration directory sub-directories
2015-05-11 10:36:50 -07:00
0b9bc7d2f5
Adding documentation about specifying multiple configuration directories
2015-05-11 10:19:04 -07:00
b082d2f529
website: link and formatting adjustments for configtest command
2015-05-11 09:42:06 -07:00
27a4dc868c
Merge pull request #904 from josephholsten/configtest-clean
...
add minimal configtest command
2015-05-11 09:01:54 -07:00
ae3e8d24c4
command/configtest: add
2015-05-08 13:09:50 -07:00
5d94a6bb7d
website: Document peers api consistency. Fixes #880
2015-05-06 12:13:28 -07:00
dd17147deb
website: Update ACL description to longest-prefix
2015-05-06 12:04:40 -07:00
e474e34528
Merge pull request #909 from hashicorp/f-create
...
Support ACL upsert behavior
2015-05-06 11:22:11 -07:00
9acc42b86e
Merge pull request #891 from hashicorp/f-token
...
ACL tokens for service/check registration
2015-05-05 22:17:31 -07:00
0473b40df2
website: Document new ACL upsert behavior
2015-05-05 19:25:27 -07:00
efaed93b91
Merge pull request #816 from pepov/master
...
Support different advertise address for WAN gossip
2015-05-04 15:40:25 -07:00
bcaca06650
Merge pull request #902 from hashicorp/f-stats-prefix
...
Allow configuring the stats prefix
2015-05-04 15:19:47 -07:00
1b121b703c
website: FAQ for delta updates
2015-05-04 14:23:33 -07:00
8ae6790b33
website: document statsite_prefix option
2015-05-03 16:54:19 -07:00
af74095584
website: document service and check acl options
2015-04-28 14:28:06 -07:00
679ae264d1
Fix disambiguty
...
When i look how to start server, a read "simply start new server with the -server flag" and understand nothing. I think "agent" is a correct word here.
2015-04-26 19:34:34 +03:00
a7efaf061c
Fix invalid link to sessions page
2015-04-22 12:40:27 +03:00
b637683ffa
Caps not necessary here
2015-04-20 20:59:45 -07:00
a9761dca33
Updating the docs to include information about registering a check with
...
a serviceid.
2015-04-20 20:56:26 -07:00
1ac70f6179
Website: minor fix for docs/agent/http/agent.html.
2015-04-17 11:43:02 -04:00
f6d38ef6e5
Website: cleanup for docs/internals/sessions.html.
2015-04-15 14:47:15 -04:00
65daaf8c03
Website: cleanup for docs/internals/security.html.
2015-04-13 18:17:29 -04:00
a6befa8ef0
Website: minor tweaks for docs/internals/jepsen.html.
2015-04-12 22:44:57 -04:00
f772412b92
Website: fix caps issue in docs/internals/consensus.html.
2015-04-11 18:32:15 -04:00
b22b821cad
Website: revert link to securing Consul doc since it's not ready yet.
2015-04-11 11:43:00 -04:00
db65ebb631
Website: minor additional tweaks for docs/internals/consensus.html.
2015-04-11 11:41:55 -04:00
da1c476343
Website: cleanup for docs/internals/consensus.html, including removing LMDB references in favor of BoltDB per GH-857.
2015-04-10 23:06:28 -04:00
8ebee678cc
Merge pull request #857 from hashicorp/f-boltdb
...
Raft uses BoltDB
2015-04-10 18:30:07 -07:00
e0febab79f
website: add example cli output from migration
2015-04-10 18:24:09 -07:00
db48e1450a
website: add mention of consul-migrate
2015-04-10 17:52:49 -07:00
f12abbe51f
Merge pull request #844 from mkostrikin/patch-1
...
Small tip for gracefull kill
2015-04-10 10:43:09 -07:00
b18d75120c
website: fix typo
2015-04-08 09:59:23 -07:00
1bf9ece0b9
Small tip for gracefull kill
2015-04-07 13:15:48 +05:00
a817a398dc
Website: GH-831, mention that https port must be specified to start an https listener.
2015-04-03 22:12:00 -04:00
70a71b9454
Website: GH-826 fix anchor links in /docs/agent/watches.html.
2015-03-31 17:22:50 -04:00
47c52a62d4
Website: tweaks to docs/internals/architecture.html.
2015-03-30 18:07:58 -04:00
4d4c631fd6
Website: very minor tweaks to docs/internals/anti-entropy.html.
2015-03-29 10:53:49 -04:00
746e1fc9e4
Website: more cleanup for docs/internals/acl.html.
2015-03-28 11:54:16 -04:00
9d71844965
Website: GH-781 and cleanup for docs/internals/acl.html.
2015-03-28 11:26:26 -04:00
14c8c86fee
update the docs: add advertise-wan cli and advertise_addr_wan json config
2015-03-28 16:08:20 +01:00
40a6191720
Fix create session link in semaphore guide
2015-03-28 10:39:53 -04:00
57da15e049
website: document minimum session TTL setting
2015-03-27 11:34:27 -07:00
fa233675b9
Website: GH-730 for docs/guides/manual-bootstrap.html.
2015-03-27 13:20:32 -04:00
60e89f0a75
Website: GH-730 for docs/agent/watches.html.
2015-03-26 14:18:51 -04:00
d43b42ab70
Website: GH-730 for docs/agent/telemetry.html.
2015-03-25 08:56:40 -04:00
240b354594
Website: GH-730 for docs/agent/encryption.html
2015-03-24 15:30:35 -04:00
2d15f2f0f4
Website: GH-730 for docs/agent/dns.html.
2015-03-23 15:48:35 -04:00
8f4ad0bbf9
Website: GH-730 for docs/internals/acl.html.
2015-03-22 11:44:16 -04:00
15f2afe92f
Website: cleanup for docs/internals/index.html.
2015-03-21 21:52:26 -04:00
78cde71a22
Add -domain command line flag to agent
...
This makes it possible to configure the domain on the command line
additionally to the config file.
2015-03-20 16:05:41 +01:00
e83598b043
Add doc notes for HTTPS API
...
- the HTTPS API address can be configured just like any other address
- the verify_incoming setting also applies to the HTTPS API
2015-03-18 16:08:41 -07:00
ab11ce6f30
Website: cleanup for node reaping detail in the FAQ.
2015-03-18 17:27:30 -04:00
aaf0ef78f4
Website: add node reaping detail to the FAQ.
2015-03-18 12:56:12 -04:00
ca7cd6496a
Website: cleanup for intro/getting-started/checks.html.
2015-03-17 17:50:28 -04:00
cb47491d40
website: Clarify consistency in FAQ
2015-03-09 11:46:59 -07:00
eebf22b86a
website: Formating fix
2015-03-09 10:10:22 -07:00
8ba8aca1e1
website: Update FAQ about UDP multicast
2015-03-09 10:01:50 -07:00
23cef6202e
website: default health check is 'serfHealth'
2015-03-05 17:38:28 -08:00
288cb464a8
Website: cleanup for docs/faq.html.
2015-03-05 17:56:41 -05:00
48458cb8a4
fix utm typo
2015-03-04 19:04:57 -08:00
a87a7920cd
explain how consul and atlas work together
2015-03-04 16:12:14 -08:00
b3f2bbe753
Website: GH-751 Link to anti-entropy doc everywhere that the term is used.
2015-03-04 10:22:53 -05:00
8dd9061956
website: fix typo in anti-entropy docs
2015-03-03 16:35:27 -08:00
6325442f93
Merge pull request #751 from hashicorp/f-ae-doc
...
Document anti-entropy internals
2015-03-03 16:34:00 -08:00
3e48f8c969
website: adjustments to anti-entropy docs
2015-03-03 16:32:17 -08:00
7f40698666
website: first pass at anti-entropy docs
2015-03-03 14:13:59 -08:00
ad7d1b3090
Website: GH-747 change acl_master token to acl_master_token
2015-03-03 11:46:57 -05:00
ce93505a16
Website: GH-747 Add docs on acl_master_token installation.
2015-03-03 11:33:49 -05:00
61d262683d
Add information about Negative Response Caching
...
Fixes #743
2015-03-02 07:04:44 -08:00
2ce1191ef3
Website: remove confusing language from docs/guides/outage.html
2015-03-01 19:15:49 -05:00
9910c7d7bd
Website: rework docs/guides/outage.html to cover cases where recovery might be easier than manual removal of failed nodes from peers.json.
2015-03-01 18:21:33 -05:00
3585ac6684
Website: GH-730 and cleanup for docs/guides/semaphore.html
2015-03-01 00:18:21 -05:00
57d56ac8ce
Website: GH-730 and cleanup for docs/guides/outage.html
2015-02-28 23:36:25 -05:00
e728e501f6
Website: GH-730 and cleanup for docs/guides/datacenters.html
2015-02-28 22:20:02 -05:00
d0dd4b689d
Website: GH-730 and cleanup for docs/guides/leader-election.html.
2015-02-28 00:08:41 -05:00
5f8de1cce3
Website: Cleanup for docs/guides/external.html.
2015-02-27 19:00:13 -05:00
1941580e6a
Website: cleanup for docs/guides/forwarding.html.
2015-02-26 13:34:45 -05:00
4289700607
Website: GH-730 links and clean-up for /docs/guides/dns-cache.html
2015-02-25 10:45:21 -05:00
24a00ca9e9
Website: GH-730 links for /docs/guides/atlas.html
2015-02-24 22:38:25 -05:00
e612549d45
Be consistent in docs about Consul Replicate vs consul-replicate
2015-02-24 20:29:41 -05:00
87fccbc40c
Website: Add links to options and commands referenced in docs/agent/basics.html and docs/guide/bootstrapping.html.
2015-02-24 14:11:11 -05:00
559084724a
Manually specify anchors for each LI in options.html. This is necessary because the middleman-hashicorp logic only inserts anchors if the body of the LI contains no links. For consistent presentation, we need to specify all anchors rather than relying on middleman.
2015-02-24 12:30:17 -05:00
d205512336
Website: /docs/agent/options Fix internal links in options.html to match the anchors created by middleman-hashicorp.
2015-02-23 15:34:46 -05:00
3f17f30691
Merge branch 'master' of github.com:hashicorp/consul
2015-02-23 14:45:00 -05:00
8ff0368aa4
Website: docs/agent/options.html Fix config-file reference.
2015-02-23 14:44:31 -05:00
bb85d6f331
website: document -recursor arg for agent cli
2015-02-23 10:43:15 -08:00
69cc331a52
Website: Cleanup for docs/guides/bootstrapping
2015-02-22 23:19:11 -05:00
29e09ac184
Website: cleanup for docs/guides/atlas.
2015-02-21 17:39:52 -05:00
53afd77e2d
s/data center/datacenter/g
2015-02-19 17:45:47 -05:00
ab18b0fc32
website: Upgrading 0.5 docs
2015-02-19 11:03:02 -08:00
65d4944dc4
website: Added missing link
2015-02-19 10:46:13 -08:00
bdfc691102
website: FAQ cleanup
2015-02-18 15:15:01 -08:00
52bdbdade9
website: Adding Atlas docs
2015-02-18 15:15:01 -08:00
441b940280
website: Document new options
2015-02-18 15:15:01 -08:00
c0f9587c62
Website: clean up docs/compatibility.
2015-02-17 14:29:00 -05:00
e13bc41d3f
Website: add some missing intra-page links in docs/agent/options
2015-02-16 20:51:04 -05:00
45a9c231be
Website: clean up a few intra-page links in docs/agent/options
2015-02-16 20:42:21 -05:00
61f1955c31
Website: add intra-page links in docs/agent/options
2015-02-16 19:48:49 -05:00
5634061a9f
Website: finalize edits for configuration file options in docs/agent/options.
2015-02-15 00:47:52 -05:00
9912be7e5f
Website: edits for configuration file options in docs/agent/options.
2015-02-15 00:43:01 -05:00
65bdd83187
Merge pull request #695 from ryanbreen/session
...
Website: cleanup for docs/agent/http/session
2015-02-13 17:21:24 -08:00
5cfed30179
Website: tweak cleanup for the docs/agent/options Command-line options section.
2015-02-13 15:19:17 -05:00
f234f1af67
Website: cleanup for the docs/agent/options Command-line options section.
2015-02-13 14:58:05 -05:00
48d5f49cf8
Remove language about LockDelay parsing.
2015-02-12 20:34:40 -05:00
8cc1ba30c3
Merge pull request #696 from michaeltchapman/watchcommand
...
website: Fix list of types available to watch
2015-02-12 17:04:06 -08:00
9ec38a1fb9
Merge pull request #692 from ryanbreen/kv
...
Website: cleanup of docs/agent/http/kv
2015-02-12 16:53:49 -08:00
20826efaa2
website: Fix list of types available to watch
...
The list of types erroneously had services listed twice in place
of 'service' and 'services'
2015-02-13 11:20:26 +11:00
443cf2dd74
More cleanup for docs/agent/http/session.
2015-02-12 15:15:53 -05:00
4d60fa08dc
Website: cleanup for docs/agent/http/session.
2015-02-12 14:50:54 -05:00
bec260c9ba
Website: finalize cleanup of docs/agent/http/kv
2015-02-11 23:44:10 -05:00
8c85a4e981
Website: cleanup of docs/agent/http/kv
2015-02-11 21:54:03 -05:00
9e527ee4b1
Website: finalize cleanup for docs/agent/http/health.
2015-02-10 15:52:22 -05:00
8ce89d87ce
Website: cleanup for docs/agent/http/health.
2015-02-10 15:49:21 -05:00
07618766a8
Merge pull request #678 from ryanbreen/agent
...
Cleanup for docs/agent/http/agent.
2015-02-09 09:54:53 -08:00
98b09d025c
Merge pull request #681 from ryanbreen/catalog
...
Website: cleanup of docs/agent/http/catalog
2015-02-09 09:53:57 -08:00
04b500b550
Website: cleanup for docs/agent/http/event.
2015-02-09 11:24:23 -05:00
3cf7b5c831
Website: finalize cleanup of docs/agent/http/catalog.
2015-02-08 12:49:02 -05:00
eccd96dfaa
Website: edits for docs/agent/http/catalog.
2015-02-08 12:44:36 -05:00
f0bb4b4e31
Finalize cleanup of docs/agent/http/agent.
2015-02-07 17:43:43 -05:00
5e8076f156
Cleanup for docs/agent/http/agent.
2015-02-07 17:36:10 -05:00
0d5e9f1b7f
Fixes for docs/agent/http/status
2015-02-06 13:47:32 -05:00
8a4f0dd179
website: document http check timeout configuration
2015-02-05 23:30:08 -08:00
cc10bf52a9
Merge pull request #673 from ryanbreen/watches
...
Very minor tweaks to docs/agent/watches
2015-02-05 09:43:54 -08:00
518743c4e6
Finalize cleanups for docs/agent/http/acl.
2015-02-05 12:02:03 -05:00
b765653a27
Cleanups for docs/agent/http/acl.
2015-02-05 11:52:29 -05:00
9402dc72bb
Pare off unnecessary space.
2015-02-04 22:28:10 -05:00
fd90c90113
Minor fixes for docs/agent/watches.
2015-02-04 22:25:29 -05:00
5b693d86a9
Finalize telemetry docs edits.
2015-02-04 14:07:33 -05:00
f647483035
Cleanup docs/agent/telemetry
2015-02-04 00:10:25 -05:00
1cde7948fa
Cleanup docs/agent/rpc
2015-02-03 17:20:50 -05:00
57a5181c4d
Cleanup docs/agent/rpc
2015-02-03 17:07:03 -05:00
2795b1054a
Some further cleanups to the root http doc.
2015-02-02 00:14:16 -05:00
1fee083009
Begin editing the docs/agent/http.
2015-02-01 17:42:02 -05:00
658fe440e2
Final edits to encryption doc.
2015-01-31 22:05:00 -05:00
e09b6f4abc
Final edits to encryption doc.
2015-01-31 22:01:33 -05:00
cd5fc328fa
Final edits to encryption doc.
2015-01-31 21:59:59 -05:00
e4f792bbbf
Tighten up TLS setting language a bit.
2015-01-31 18:59:11 -05:00
144096225d
Tighten up TLS mode language a bit.
2015-01-31 18:55:58 -05:00
2063a412ad
Substantial and potentially inaccurate rewrite to docs/agent/encryption.
2015-01-31 18:33:29 -05:00
07bb5ea4ac
Clean up double 'is'.
2015-01-31 13:36:31 -05:00
0df468170e
Final tweaks to DNS doc.
2015-01-31 13:17:43 -05:00
7396677907
More heavy-handed reorg of content for flow.
2015-01-31 13:07:21 -05:00
01e2895573
Restructure opening paragraphs to have better flow.
2015-01-31 13:01:00 -05:00
2c22cef5cc
Finish first pass of DNS updates.
2015-01-31 12:59:03 -05:00
81528d772b
Update docs for standard DNS queries.
2015-01-31 12:51:28 -05:00
b63c42e90b
Minor cleanups to docs/agent/dns.
2015-01-30 23:32:57 -05:00
b953d37df5
Make capitalization of agent more consistent.
2015-01-30 14:49:58 -05:00
1d11a7355e
Minor cleanups to docs/agent/basics.
2015-01-30 14:48:20 -05:00
56f2807822
A bit more language cleanup to checks.
2015-01-29 17:17:02 -05:00
c82cc407d9
No need to confine the example to a web app.
2015-01-29 17:14:19 -05:00
618ff00714
Some reorg of the TTL description.
2015-01-29 17:12:20 -05:00
64f8665a5d
Make it clear that checks persist with the node, period, not just across runs of the agent but across reboots as well.
2015-01-29 17:10:15 -05:00
3fb6a60d84
Add a bit more detail around checks and clarify some language.
2015-01-29 17:08:56 -05:00
6d8f46188d
Language touch-ups for the checks docs.
2015-01-29 16:45:19 -05:00
14a8d4049b
Move the note about checks to its own line.
2015-01-28 19:46:28 -05:00
1d35ae1223
Grammatical cleanup in services.html.
2015-01-28 19:43:52 -05:00
266fd248cb
Clarify the compatibility
2015-01-25 13:59:37 -08:00
2a80aacb86
docs: describe child process handling on Windows for lock command
...
Add website documentation for how the lock command handles child
process termination on Windows.
2015-01-25 11:42:29 +01:00
9be514e747
website: fix minor typos in docs
2015-01-23 22:11:15 +01:00
e5e519df4b
Merge pull request #625 from hashicorp/f-maintcmd
...
New "maint" command
2015-01-22 11:56:49 -08:00
361b3109c2
website: update maint command documentation for list mode
2015-01-22 10:34:14 -08:00
99671ba0d7
website: Cleanup the 'lock' documentation
2015-01-21 17:35:06 -08:00
14d55cb40a
Merge pull request #622 from hashicorp/f-sockets
...
Unix domain sockets
2015-01-21 16:30:03 -08:00
e416d6dbd3
website: document reason flag for http api
2015-01-21 14:33:01 -08:00
61322641ea
website: document maint command
2015-01-21 14:07:54 -08:00
f1092f4b3f
website: update maintenance mode endpoint
2015-01-21 11:15:15 -08:00
ad16e4aacb
website: fix health endpoint page
2015-01-20 22:50:33 -08:00
f37a67e04c
website: move content from monolithic http page
2015-01-20 22:50:30 -08:00
e1023c7773
website: separate pages for top-level endpoints
2015-01-20 22:49:41 -08:00
65b41b9236
website: beginning http docs update
2015-01-20 22:49:41 -08:00
27de0adf3b
agent: support multiple checks per service
2015-01-20 21:48:42 -08:00
c61aa2e56c
website: add notice about socket permission portability
2015-01-20 19:16:17 -08:00
6b554f5370
website: document unix_sockets config
2015-01-20 16:29:22 -08:00
a9819e71a8
Fixing merge conflict
2015-01-20 13:01:13 -08:00
b92b09cd19
website: Document the lock command
2015-01-19 16:43:38 -10:00
8698d9bdb3
website: Document a distributed semaphore
2015-01-19 16:43:24 -10:00
106a54313b
website: document node maintenance mode
2015-01-16 15:38:13 -08:00
3b815cd0aa
agent: maintenance mode api's are idempotent
2015-01-16 15:37:52 -08:00
3dba905ce4
website: document service maintenance endpoint
2015-01-16 15:37:52 -08:00
8ded1063db
website: update docs for agent socket options
2015-01-16 13:06:49 -08:00
61d2f71d14
agent: only ignore errors on IsNotExist()
2015-01-16 09:14:52 -08:00
9777ac55e6
Update option text to describe how to use Unix listening sockets.
2015-01-14 20:22:59 +00:00
d80588f780
Merge pull request #592 from nicholascapo/check-http
...
command/agent: Add simple HTTP check type
2015-01-13 12:11:50 -08:00
e9fb85d675
Update HTTP Check documentation: 503 -> 429
2015-01-13 00:10:05 +00:00
b5e1de165b
Add "only_passing" option to DNS config
...
This excludes nodes from DNS results if their healthchecks are in any
non-passing state, not just if they're critical.
2015-01-10 13:17:11 +01:00
f2649edcfc
command/agent: Add simple HTTP check type
...
These checks make an `HTTP GET` request every Interval to the specified URL.
The status of the service depends on the HTTP Response Code.
`200` is passing, `503` is warning and anything else is failing.
2015-01-09 16:43:24 -06:00
8c991c3632
website: omit excessive use of the word lastly
...
Simplify wording by removing various uses of the word lastly.
2015-01-09 06:37:26 +01:00
acfc42c3db
website: fix typo
...
s/patameters/parameters/
2015-01-09 05:59:06 +01:00
8befdcbd93
website: Documenting ?cas with KV DELETE
2015-01-08 17:34:41 -08:00
abbcecd1dd
website: Updating the documentation
2015-01-08 12:08:29 -08:00
95b3837b75
website: Document session behavior and TTL
2015-01-07 15:38:16 -08:00
b435a0c842
website: Update session API documentation
2015-01-07 15:19:27 -08:00
9ba908eadc
website: Link to consul-replicate. Fixes #439
2015-01-07 13:30:30 -08:00
1088a5c170
Merge pull request #558 from ceh/http-api-response-headers
...
add ability to specify response headers on the HTTP API
2015-01-05 11:36:08 -08:00
a4b529107c
Merge pull request #568 from justinclayton/patch-1
...
Update exec.html.markdown
2015-01-05 11:29:11 -08:00
4461c750bb
website: fix typo, casing and links
...
Fix typo in Leader Election guide: s/blog/blob/
Also fix various casing issues and prefer HTTPS links
for HashiCorp projects.
2015-01-04 12:58:58 +01:00
419f287273
Update exec.html.markdown
...
fixing near-meaningless spelling and grammar typos ;-)
2015-01-02 10:30:11 -08:00
daae47fefc
Merge pull request #556 from darron/master
...
Docs: It's not key - it's service.
2015-01-02 21:54:53 +05:30
cb32b82b37
Revert "correct the doc for obtaining formatted json"
...
This reverts commit cf3b9ec4fee09075481fd5c521dd6c4b8db58e91.
2015-01-02 08:00:09 +01:00
db23a3f0e9
add ability to specify response headers on the HTTP API
...
Add an config object that allows adding HTTP header response fields to every
HTTP API response.
Each specified header is added to every response from all HTTP API endpoints.
Each individual endpoint may overwrite the specified header, which makes sure
that Consul headers such as 'X-Consul-Index' is enforced by the API.
2014-12-28 19:17:08 +01:00
ee834837b2
It's not key - it's service.
...
It's right in the description, but the example seems to be wrong.
2014-12-26 21:51:48 -08:00
3823a931c6
Add default rpc address configuration option as CONSUL_RPC_ADDR env variable
...
Similar as in serf: https://github.com/hashicorp/serf/pull/210
2014-12-16 12:18:34 +01:00
8351121fde
minor grammer fix
2014-12-11 19:02:29 +09:00
52df94e560
updates to leader election documentation
...
Clarify the steps involved in the leader election process.
- provide examples of creating a session
- provide links to appropriate documentation
2014-12-05 14:28:21 -05:00
693fa207c8
Small doc update for exec command
...
the documentation for -tag says it must be used with -service, but
example used is -server, which doesn't work.
This changes -server to -service.
2014-12-03 22:46:26 -06:00
d74f79b3fa
consul: Enforce service registration ACLs
2014-11-30 21:05:15 -07:00
376f9694f4
website: Update ACL docs
2014-11-30 20:12:44 -07:00
bd5467c593
docs: agent/watches: minor fixes
2014-11-26 13:48:33 +00:00
bfd6c8aac0
docs: agent/checks: minor fixes
2014-11-26 13:42:53 +00:00
f0a2fa325a
docs: agent/dns: minor fixes
2014-11-26 13:33:55 +00:00
e1a0845f5a
docs: agent/basics: minor fixes
2014-11-26 13:15:41 +00:00
261c69c4ff
docs: internals/security: minor fixes
2014-11-26 13:05:33 +00:00
548f1a07ad
docs: internals/acl: minor fixes
2014-11-26 12:57:15 +00:00
2ad884abee
docs: internals/sessions: minor fixes
2014-11-26 12:49:53 +00:00
dbb365baca
docs: internals/architecture: minor fixes
2014-11-26 12:31:38 +00:00
7ff0acfb65
docs: compatibility: minor fixes
2014-11-26 12:09:36 +00:00
58ba650cb0
website: Improve docs for reloading config. Fixes #407
2014-11-25 19:03:14 -08:00
22ad8172b8
correct the doc for obtaining formatted json
...
was "?pretty" should be "?pretty=1"
2014-11-21 12:27:48 -08:00
196cbd27b2
agent: ignore -encrypt if provided when keyring exists
2014-11-19 16:37:40 -08:00
9217e371bc
website: document new behavior of the -encrypt option
2014-11-19 16:36:01 -08:00
c59107f08e
command: remove -init argument from keyring, auto-persist keyrings when using agent -encrypt
2014-11-19 16:35:13 -08:00
08f1605159
website: clean up keyring command docs and add output examples
2014-11-19 16:34:18 -08:00
001a579d47
command/keyring: cleanup
2014-11-19 16:34:18 -08:00
1ec111bbfc
consul: kill unused struct fields
2014-11-19 16:34:17 -08:00
03012e8ac6
command: allow wan ring to be modified separately from lan pools
2014-11-19 16:33:34 -08:00
9a7a7c10d4
website: documentation updates for keyring command
2014-11-19 16:32:06 -08:00
bb06d5ccb8
website: remove keyring persistence options from agent page
2014-11-19 16:31:06 -08:00
8dc53447a3
command: renamed keys to keyring to disambiguate usage
2014-11-19 16:31:06 -08:00
d8f513f6d6
website: update consul keys documentation
2014-11-19 16:30:22 -08:00
c0f1b5f8c8
website: document keys command
2014-11-19 16:30:22 -08:00
dd41c69389
Merge pull request #478 from amalaviy/https
...
Added HTTPS support via a new HTTPS Port configuration option
2014-11-19 11:17:10 -08:00
46178dbb37
Change names to StartJoinWan, RetryJoinWan etc
2014-11-17 17:14:59 -05:00
59a68ecc26
Added HTTPS support via a new HTTPS Port configuration option similar to the HTTP Port.
2014-11-17 14:29:35 -05:00
df8d099f49
Add start-wan-join, retry-wan-join and related configuration options and commandline options
2014-11-14 10:56:39 -05:00
bb7eb29ade
Another typo
2014-11-13 17:44:20 -05:00
dfc094a5d0
extra '
2014-11-13 17:43:25 -05:00
19820d9794
Doc explaining the blacklist mode and consul exec
2014-11-13 17:42:39 -05:00
c9de806ab9
website: better description of config merging in agent options. Closes #470
2014-11-13 12:04:09 -08:00
36c44d4386
[Doc] Added missing link to leader-election
2014-11-13 16:56:07 +01:00
a0f954b0ae
Typo fix for events command doc
2014-11-10 16:37:18 -05:00
4347b9394d
Fix some typos in website docs
2014-11-04 21:33:42 -07:00
982b177e69
Support old recursor config for backwards compatibility
2014-11-03 11:28:21 -08:00
2c16fec0cc
Merge pull request #448 from foostan/multiple_recursor
...
Add multiple recursor definition support
2014-11-03 11:18:37 -08:00
4d8f1c2133
Add multiple recursor definition support
2014-11-01 04:26:26 +09:00
7d01816c1f
Rephrase
2014-10-30 21:46:19 -04:00
7a2a01f9de
ACL doc clarification
...
Fixes #443
2014-10-30 21:44:23 -04:00
2bf05057a4
Merge pull request #433 from hashicorp/f-multi-checks
...
agent: add support for multiple checks and config mixing
2014-10-27 11:58:36 -07:00
c751a4ff5f
website: fix JSON in multiple checks documentation
2014-10-27 11:58:01 -07:00
e57ea7df78
Do not index "Jespen" code block
...
The word "Jespen" is one of our top keywords because it appears so many times
in the Jespen Testing page. This commit adds a comment to disable Google
indexing in that code block so we can better target keywords.
2014-10-26 22:34:14 -04:00
95fa599937
website: update docs for multiple checks in config
2014-10-26 13:25:48 -07:00
ad4598959e
Add multiple service definition support
...
This change-set adds another key to the configuration decoding called
`services`, which is expected to be a list of service definitions. It
follows the established convention of only allowing one of the keys:
`service`, `check`, `services`. For every entry in the list it calls
the corresponding decode method and appends it to the Servics of the
resulting Config.
While a similar result could be achieved with changing the Services
member of the Config struct to have named mapstruct tag it lacks the
proper time conversions provided by DecodeServiceDefinition.
2014-10-23 22:50:40 -04:00
df43c42c94
website: Fixing formatting
2014-10-23 17:14:40 -07:00
2b2f9980fb
Merge pull request #427 from blalor/agent_http_links
...
website: Improve navigability of agent HTTP API categories
2014-10-23 16:46:58 -07:00
d83053e8ab
website: document retry_join and retry_interval flags for config file
2014-10-23 16:40:49 -07:00
9df9eb0983
Small typo in the doc
2014-10-23 14:32:11 -04:00
d2985d3c04
Add links for status endpoints
2014-10-23 07:59:58 -04:00
3082b3f95f
Add links for event endpoints
2014-10-23 07:59:05 -04:00
d45fdd15dd
Add links for ACL endpoints
2014-10-23 07:57:55 -04:00
39e44c7968
Add links for session endpoints
2014-10-23 07:56:28 -04:00
9a29e1b60e
Add links for health endpoints
2014-10-23 07:54:46 -04:00
4401fbf0e3
Add links for catalog endpoints
2014-10-23 07:53:11 -04:00
3ecb9ec8df
Add links for agent endpoints
2014-10-23 07:50:54 -04:00
4ca29beec3
Improve navigability of agent HTTP API categories
2014-10-23 07:44:20 -04:00
d43a89fdd7
Fix spelling of "separator" in the HTTP API docs
2014-10-23 12:31:41 +01:00
03e3599872
Fix small doc mistake
2014-10-20 06:26:38 +00:00
e265ea050d
Use new Markdown syntaxes and add SEO descriptions
2014-10-19 19:42:13 -04:00
e90f3ce442
Use codeblocks for code
2014-10-19 19:41:11 -04:00
771263cc53
Merge pull request #398 from hashicorp/ryanuber-docs
...
website: Documentation adjustments
2014-10-14 12:01:40 -07:00
002083ad8d
website: re-word a few things
2014-10-13 22:59:35 -07:00
b1d0611e0e
website: Document Checkpoint. Fixes #340 .
2014-10-13 18:03:39 -07:00
6755044e02
website: Adding FAQ page. Fixes #363 .
2014-10-13 17:46:41 -07:00
eeba4894d9
website: add 0.4 to compatibility chart
2014-10-13 14:22:57 -07:00
2c1add1c67
Merge pull request #396 from ryanuber/f-retry-join
...
agent: Retry failed joins on agent start
2014-10-13 10:46:10 -07:00
984ea76e6b
website: document retry join
2014-10-12 12:31:47 -07:00
c78bd6db63
Fix mistake in the watches documentation
2014-10-11 17:04:52 +02:00
651f559380
Pre-process sessions docs as ERB for image tags
2014-10-06 19:12:25 -04:00
ab75771eb6
Pre-process architecture docs as ERB for image tags
2014-10-06 19:12:17 -04:00
5917aa0e20
Added the dns_config option enable_truncate to the docs.
2014-09-30 15:31:28 -04:00
4037f7c41c
website: fixing formatting
2014-09-24 16:59:43 -07:00
51eede7117
Merge pull request #358 from SnehaM/master
...
Documenation fix : reload command
2014-09-23 08:19:44 -07:00
344f4f93d4
Fix typo
...
Should be whitelist, not whilelist.
2014-09-23 15:24:19 +02:00
4e4ed41d47
reload command triggers reload
2014-09-23 12:52:09 +05:30
baa08454be
removed repeated 'can'
2014-09-18 11:11:00 +05:30
430885595d
json sample fixed for PUT /v1/acl/create
2014-09-06 01:55:38 +02:00
8846068455
website: Documenting new options
2014-09-02 14:36:25 -07:00
9035e2d6b7
website: document addresses config
2014-09-02 12:49:52 -07:00
47e30adf13
agent: statsd support. Fixes #247
2014-09-02 11:26:17 -07:00
bf5df40981
Fix typo
2014-09-02 19:15:54 +02:00
ea20cabc0f
website: Updating docs
2014-09-01 15:03:37 -07:00
5bab1868d2
Merge pull request #311 from josephholsten/alphatize-options
...
alphabetize config options in docs. Fixes #221
2014-09-01 14:45:40 -07:00
6d382465b8
alphabetize config options in docs. Fixes #221
2014-08-31 02:03:01 +00:00
7f9b260c93
website: typo fixes
2014-08-30 17:22:23 -07:00
93d728ef58
add link to raft visualization
2014-08-30 23:43:45 +00:00
8c178e5793
Fixed a small typo
2014-08-28 22:23:01 -04:00
87c4e22f03
website: typo fixes
2014-08-28 17:54:58 -07:00
2f8948fe89
website: Adding docs
2014-08-28 17:22:56 -07:00
b6279be742
website: Document node lifecycle. Fixes #282 .
2014-08-22 15:54:48 -07:00
168ddedcee
agent: Support encrypt CLI flag. Fixes #245 .
2014-08-22 15:08:15 -07:00
2cde3678ea
website: Document client auth for TLS. Fixes #255 .
2014-08-22 15:00:07 -07:00
3944e2f276
website: Document data dir requirements. Fixes #264 .
2014-08-22 14:58:10 -07:00
84cfa31f2e
website: Minor cleanups
2014-08-21 17:35:05 -07:00
60a50301db
website: Document watches
2014-08-21 17:25:42 -07:00
de89031c1a
website: Fixing docs
2014-08-19 10:02:43 -07:00
98b83d9c0d
Merge pull request #288 from gmr/rfc-2782-srv-lookups
...
Add RFC-2782 style SRV lookups
2014-08-18 16:01:18 -07:00
99db96e4ea
website: rewording
2014-08-18 15:46:59 -07:00
ea0a1dca2e
website: ACL internals
2014-08-18 15:46:59 -07:00
8c5ae92fa7
website: Documenting ACL endpoints
2014-08-18 15:46:59 -07:00
f6eaa3b2fd
website: document configuration
2014-08-18 15:46:58 -07:00
97b8960bd8
Add RFC-2782 style SRV lookups
2014-08-18 15:45:56 -04:00
2e56d505c0
website: More port use docs
2014-08-05 10:46:52 -07:00
1824319dbf
Merge pull request #271 from lra/doc_ports
...
website: Document used ports
2014-08-05 10:42:12 -07:00
fc81726db4
Updated links to the deployment table
2014-08-03 21:28:17 -04:00
1ea4eacbc5
Some breath
2014-08-03 20:52:36 -04:00
edb6de1e3e
Add a ports used section to the doc
2014-08-03 20:51:43 -04:00
2906b7f439
website: Clarify the ?pretty docs
2014-08-01 13:38:03 -07:00
ec8e271804
updated website documentation with the "pretty" parameter
2014-08-01 14:16:21 -06:00
29fdfb0f43
Short doc note about DNS case-insensitivity
2014-07-23 23:42:22 +02:00
8b8184d942
website: remove old docs on the -encrypt flag
2014-07-15 09:50:49 -07:00
c505b49bf8
There is no `-statsite` command-line flag.
2014-07-10 18:06:36 -07:00
14e282dca8
Improve clarity around changing the `-client` param
...
This is a small change that (IMO) makes more explicit the effect
of changing `-client` -- namely, that you'll have to provide
`-rpc-addr` to every other consul command you run.
2014-07-02 21:21:37 +02:00
3b6e3d1846
website: Keep old bootstrapping docs
2014-07-01 15:02:42 -07:00
358b473e01
Updating documentation for new bootstrap method
2014-07-01 15:02:26 -07:00
6e9af77bff
Fix a small typo in RPC docs.
2014-06-19 13:53:43 -05:00
87239044a5
Fix merge conflict
2014-06-17 12:50:35 -07:00
90249629c3
Update leader-election.html.markdown
2014-06-17 09:41:59 -07:00
27fec33034
Merge pull request #217 from zembutsu/patch-2
...
website: fix typos
2014-06-17 09:41:42 -07:00
4db6d83f44
website: Fixed semantic meaning of upstream in DNS guide
2014-06-17 10:02:44 -04:00
fd2380bfc0
website: Format hyperlink inside HTML literal
2014-06-17 09:55:17 -04:00
5a345164c7
website: Fixing small typos in guides section
2014-06-17 09:55:00 -04:00
e262bdc35c
fix typos
2014-06-17 21:02:01 +09:00
91373968a8
Adding server_name configuration for TLS
2014-06-13 11:10:27 -07:00
7309cbadb9
Improve clarity of ?keys behaviour.
...
I read the previous version initially as meaning that it would return a list of keys which have no value set, which I couldn't understand. I think this removes some ambiguity.
2014-06-13 12:20:24 +01:00
2d106f9765
website: Clarify upgrade procedures. Fixes #187 .
2014-06-11 11:25:55 -07:00
d48379054b
website: Update compatibility table for 0.3
2014-06-11 11:08:33 -07:00
e9a31bb298
website: Show join help instead of members
2014-06-11 11:08:19 -07:00
90cababb0b
website: Mention reload command in addition to SIGHUP
2014-06-11 11:03:59 -07:00
5378542b1c
website: Document the new reload command
2014-06-11 11:01:36 -07:00
4952923ced
website: Document reload RPC command
2014-06-11 10:54:36 -07:00
648429288e
agent: Adding SyslogFacility configuration
2014-06-11 10:18:19 -07:00
2568918055
website: Document the check_update_interval config
2014-06-09 12:51:12 -07:00
9e925bf458
consul: Adding support for optional session name
2014-06-09 11:42:28 -07:00
2c63d17e79
Merge pull request #200 from hashicorp/f-dns
...
Adding support for DNS TTLs and stale reads
2014-06-09 11:13:47 -07:00
0b87eb29de
website: clarify unique per-ndoe
2014-06-08 17:31:44 -07:00
3af3f40434
website: Documenting DNS settings
2014-06-08 17:26:41 -07:00
7fc5b7a920
command/members: Improve output. Fixes #143
2014-06-06 16:00:02 -07:00
a47db238bb
website: Clarify outage vs forced server removal
2014-06-05 22:46:46 -07:00
78704a769c
Fix typo in check update endpoints
...
The current website says that you can send output with the update of a check using the `?node` parameter. It wasn't working and I check [the source](3874498374/command/agent/agent_endpoint.go (L110)
2014-06-04 22:55:17 -05:00
8e018fd1d1
Fixed spelling of 'service'
2014-05-30 13:10:24 -04:00
1ac127b73e
agent: Omit certains keys from the /self endpoint
2014-05-29 11:24:37 -07:00
ead134c890
Return both member and config in `/v1/agent/self`
2014-05-28 00:09:28 +02:00
a028c3ae93
Add `/v1/agent/self` and return local agent config
2014-05-27 01:15:33 +02:00
d42474a7cb
Support wildcard for check lookup. Fixes #152
2014-05-21 12:45:12 -07:00
5fa10c912e
Support rejoin after leave. Fixes #110 .
2014-05-21 12:32:24 -07:00
9f2631f383
agent: syslog support. Fixes #105 .
2014-05-21 12:06:03 -07:00
ce5470cbc2
agent: Support for raw key lookup. Fixes #150 .
2014-05-20 16:53:43 -07:00
bd4d338678
website: Document DNS truncation. Fixes #144 .
2014-05-20 16:43:44 -07:00
9c5fca1a3e
website: Document KV changes
2014-05-20 16:25:30 -07:00
2129b9d592
website: Documenting the session endpoints
2014-05-20 16:25:30 -07:00
1e861114c7
website: Adding guide on leader election
2014-05-20 16:25:30 -07:00
2748dcd4c6
website: Starting to document sessions
2014-05-20 16:25:30 -07:00
14a84f4a4f
agent: Support -advertise cli flag. Fixes #156 .
2014-05-16 10:49:55 -07:00
81eac87031
s/direclty/directly/
2014-05-08 17:48:29 -07:00
1543696e03
website: mention client_addr
2014-05-08 13:44:59 -07:00
01e085cc64
agent: Correct spelling of separator. Fixes #101 .
2014-05-07 15:25:17 -07:00
fe35d55663
website: update docs, CLI flag no longer available
2014-05-07 15:11:56 -07:00
8505ee7372
docs: The config key is "encrypt", not "encrypt_key"
2014-05-07 15:04:50 -07:00
1591c4d393
Merge pull request #128 from carlosdp/pid-file
...
Add pid-file flag to agent
2014-05-06 19:57:12 +02:00
65c0069872
website: improve the docs for the agent TTL endpoints
2014-05-06 10:44:42 -07:00
511c1c0273
Add pid-file option to agent docs
2014-05-05 23:39:26 -04:00
a67209f6ab
website: Fixing old reference to dns_addr
2014-05-04 13:26:21 -07:00
48f947386b
website: fix a couple of typos.
2014-05-03 19:16:55 -04:00
be8b976451
website: remove some serf stuff, old js files
2014-05-02 14:13:48 -04:00
28e2fd3e1c
fixing typo, missing "like"
2014-05-01 22:34:45 -04:00
1636abd125
website: Document the KV API changes
2014-04-30 23:44:27 -04:00
a70361282e
website: Document the ui-dir flags
2014-04-30 23:43:56 -04:00
c90975405a
Revert the interval and TTL values
2014-04-30 15:46:20 -04:00
ab2e3bf0f5
Minor documentation fixes
...
- Correct spotted typos
- Ran JSON snippets through jsonpp for consistent display of JSON results
- Unfortunately my editor stripped EOL whitespace so there's a bit of whitespace diff
2014-04-30 15:26:07 -04:00
ce8a5490f2
fix typo
2014-04-25 23:09:17 +09:00
9175a4e7c3
website: Adding the output key to docs examples
2014-04-21 16:21:52 -07:00
0e9f5019ad
website: typo fix
2014-04-21 16:09:36 -07:00
d6b7dd5b62
agent: Support server-side filtering of passing checks. Fixes #57 .
2014-04-21 16:08:26 -07:00
757f590455
website: Cleanup verbage
2014-04-21 13:50:18 -07:00
a11fd66f28
website: Document the consistency modes
2014-04-21 13:46:57 -07:00
6de3ddfd93
website: Document HTTP changes
2014-04-21 13:40:16 -07:00
189a440cef
fix typo
2014-04-17 21:35:59 -04:00
e40da274d5
Copy fixes: typos, misspellings, grammar, wording
2014-04-17 14:45:53 -07:00
3da9d53ab2
website: Typo. Fixes #43 .
2014-04-17 11:31:25 -07:00
eb77b40027
website: Grammar cleanup
2014-04-16 17:29:37 -07:00
3bce8ff0e9
website: Add note about jepsen testing
2014-04-16 17:03:48 -07:00
f104336fd2
website: Adding page on Jepsen testing
2014-04-16 17:03:48 -07:00
dd6f55ff3b
Round 2: Fix typos, grammar errors, and misspellings
2014-04-16 00:01:12 -04:00
32eb65316f
agent: Adding support for -join flag. Fixes #33 .
2014-04-11 16:59:16 -07:00
5f52dfbf05
website: Document the port configurations
2014-04-11 16:31:33 -07:00
13417cb333
website: Documentation cleanup
2014-04-11 16:23:16 -07:00
37bd90f09d
website: Adding guide on outage recovery
2014-04-11 12:55:02 -07:00
caf48c8722
website: Multiple warnings about single server deployment
2014-04-11 12:43:06 -07:00
668255784c
website: Guide for adding/removing servers
2014-04-11 12:32:34 -07:00
d6bccb8905
website: Adding multiple datacenter guide
2014-04-11 12:03:12 -07:00
c0428b5b32
website: Update link to deployment table
2014-04-10 17:34:31 -07:00
e2d45b5eb0
website: Doc cleanup
2014-04-09 11:40:52 -07:00
5bf2c084ba
Merge branch 'bindGuide' of https://github.com/andrewwatson/consul into andrewwatson-bindGuide
...
Conflicts:
website/source/docs/guides/index.html.markdown
2014-04-09 11:34:31 -07:00
19d83c5a32
small verbiage update
2014-04-09 14:12:25 -04:00
ef0330a950
updated docs to remove multiple zones and provide examples of testing
2014-04-09 14:08:32 -04:00
911ce92cf3
website: Documentation cleanup
2014-04-09 11:06:27 -07:00
fd40136e2a
new guide for setting up bind and Consul to play nice
2014-04-08 23:56:26 -04:00
549e78e005
website: Clarify the DNS documentation
2014-04-08 12:18:05 -07:00
aa49718cc9
Merge pull request #28 from hashicorp/f-tls
...
Adding support for TLS
2014-04-07 15:18:38 -07:00
37a7a4400e
website: Remove roadmap
2014-04-07 15:11:58 -07:00
002b9018a1
website: More info on TLS encryption
2014-04-07 15:07:21 -07:00
c452b19267
website: Document new TLS flags
2014-04-07 15:07:00 -07:00
83952c51a0
website: Mention that telemetry can be streamed
2014-04-04 14:55:23 -07:00
08d29f120f
Merge pull request #26 from hashicorp/f-tags
...
Adding support for multiple tags
2014-04-03 15:51:31 -07:00
8c6e544442
website: Correct some empty lists to null
2014-04-03 14:40:05 -07:00
50eaefa03e
website: Updating the tags documentation
2014-04-03 14:18:57 -07:00
7f8b17ae2f
Merge branch 'master' into jf_improve_consensus_internals_doc
2014-04-02 21:39:25 -04:00
8d8754e7a8
website: Document the Key/Value API
2014-03-31 21:15:46 -07:00
00bd68d866
website: Update format of consul info
2014-03-31 21:15:37 -07:00
38e645ac18
Add raft link and fix some typos
2014-03-28 23:33:50 -04:00
46a2c37852
agent: Support protocol version setting
2014-03-09 15:57:03 -07:00
752b4ac43f
command/members: Remove the detailed flag, abstraction leak
2014-03-09 15:46:43 -07:00
a497a8d5c7
consul: Update example output
2014-02-25 17:45:57 -08:00
65df8cedf2
website: document registering of external services
2014-02-25 12:22:25 -08:00
927e8d93b4
website: Update bootstrapping guide to use the info command
2014-02-23 18:17:48 -08:00
6a7c45c66c
website: Update sample output again
2014-02-23 18:13:51 -08:00
8f47b60145
website: Update sample output
2014-02-23 18:11:07 -08:00
38317d4890
website: Documenting the info command
2014-02-23 17:09:59 -08:00
5b5b3f1189
website: adding guide on bootstrapping a DC. Fixes #5 .
2014-02-22 21:08:36 -08:00
bdcbedafa5
website: document registering checks and services better. Fixes #6
2014-02-22 18:53:31 -08:00
b4143c82ea
website: Clarify the ?index parameter. Fixes #7
2014-02-22 18:47:09 -08:00
85091090c6
agent: Switch to -data-dir, better error if missing. Fixes #2 .
2014-02-22 17:34:57 -08:00
981e58e8e9
agent: Adding support for statsite telemetry
2014-02-20 14:59:54 -08:00
c975f5b968
website: documenting the internals
2014-02-20 12:26:50 -08:00
30bc19f002
website: fixing typo
2014-02-19 17:05:57 -08:00
5101cf88df
website: document the high level architecture
2014-02-19 16:58:15 -08:00
7c0b73550c
website: finish the HTTP documentation
2014-02-19 14:27:01 -08:00
4b490b3a83
website: working on documenting http api
2014-02-19 12:05:18 -08:00
1924f73449
website: document the DNS interface
2014-02-19 11:05:42 -08:00
1eb51ee663
website: document checks and services
2014-02-18 18:05:18 -08:00
0fc401b14e
website: replace serf with consul
2014-02-18 17:37:23 -08:00
ed2622d0c8
website: replacing serf references
2014-02-18 17:33:44 -08:00
c200b63204
website: updating documentation on commands
2014-02-18 17:32:13 -08:00
a7e7bfdc62
website: working on docs
2014-02-18 15:30:07 -08:00
0611db496a
website: bulk copy from serf
2014-02-07 16:41:03 -08:00
Ryan Uber