* ui: Ensure dc selector correctly shows the currently selected dc
* ui: Restrict access to non-default partitions in non-primaries (#11420)
This PR restricts access via the UI to only the default partition when in a non-primary datacenter i.e. you can only have multiple (non-default) partitions in the primary datacenter.
This commit tries to make the development experience of working on our OIDC support a little more realistic, essentially by creating our own OIDC provider in our application (only during development builds). You can still provide a real OIDC provider to work with via our dev time environment/cookie variables as before, just now we default to the behaviour in this commit. Overall this makes it much easier to verify our OIDC support in the UI, and also opens up avenues for us to be able to test more scenarios that we couldn't before (for example not only successful logins, but also erroneous, potentially with multiple error reasons).
* Add `is` and `test` helpers in a similar vein to `can`
Adds 2 new helpers in a similar vein to ember-cans can:
- `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability.
- `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined.
* Adds TextInput component + related modifiers/helpers/machines/services (#11189)
Adds a few new components/modifiers/helpers to aid building forms.
- state-chart helper, used in lieu of a more generic approach for requiring our statecharts.
- A few modifications to our existing disabled modifier.
- A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this.
- A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date.
Documentation is included for all of ^
* ui: Adds initial CRUD for partitions (#11190)
Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application.
New components:
- Consul::Partition::Form
- Consul::Partition::List
- Consul::Partition::Notifications
- Consul::Partition::SearchBar
- Consul::Partition::Selector
See additional documentation here for more details
New Route templates:
- index.hbs partition listing/searching/filtering
- edit.hbs partition editing and creation
Additionally:
There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site.
Our softDelete functionality has been DRYed out a little to be used across two repos.
isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components.
* ui: Exclude all debug-like files from the build (#11211)
This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
* ui: Gracefully recover from non-existent DC errors
This PR fixes what happens in the UI if you try to navigate to a non-existing DC.
When we received a 500 error from an API response due to a non-existent DC, previously we would show a 404 error, which is what we were trying to convey. But in the spirit of the UI being a 'thin client', its probably best to just show the 500 error from the API response, which may help folks to debug any issues better.
* Automatically set the CONSUL_DATACENTER_LOCAL env var for testing
* Add Partition to all our models
* Add partitions into our serializers/fingerprinting
* Make some amends to a few adapters ready for partitions
* Amend blueprints to avoid linting error
* Update all our repositories to include partitions, also
Remove enabled/disable nspace repo and just use a nspace with
conditionals
* Ensure nspace and parition parameters always return '' no matter what
* Ensure data-sink finds the model properly
This will later be replaced by a @dataSink decorator but we are find
kicking that can down the road a little more
* Add all the new partition data layer
* Add a way to set the title of the page from inside the route
and make it accessibile via a route announcer
* Make the Consul Route the default/basic one
* Tweak nspace and partition abilities not to check the length
* Thread partition through all the components that need it
* Some ACL tweaks
* Move the entire app to use partitions
* Delete all the tests we no longer need
* Update some Unit tests to use partition
* Fix up KV title tests
* Fix up a few more acceptance tests
* Fixup and temporarily ignore some acceptance tests
* Stop using ember-cli-page-objects fillable as it doesn't seem to work
* Fix lint error
* Remove old ACL related test
* Add a tick after filling out forms
* Fix token warning modal
* Found some more places where we need a partition var
* Fixup some more acceptance tests
* Tokens still needs a repo service for CRUD
* Remove acceptance tests we no longer need
* Fixup and "FIXME ignore" a few tests
* Remove an s
* Disable blocking queries for KV to revert to previous release for now
* Fixup adapter tests to follow async/function resolving interface
* Fixup all the serializer integration tests
* Fixup service/repo integration tests
* Fixup deleting acceptance test
* Fixup some ent tests
* Make sure nspaces passes the dc through for when thats important
* ...aaaand acceptance nspaces with the extra dc param
This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app.
The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions.
Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case.
Notes:
Added a PartitionAbility while we were there (not used as yet)
Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP.
We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different!
We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet.
All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
We noticed that our mock API would sometimes respond with an empty array
of addresses - which resulted in an empty space in the gateway upstream
listing which looked as though it could be broken.
I checked with backend, and as this will never happen, I made the change
here also so the gateway upstream list is always fully populated with
addresses.
* Add mock data for NamespaceRules
* Create NamespaceTable component and styling
* Add NamespaceRules route and add to model
* Create Namespace Rules tab and implement with flag to only show in ent
* Add emptystate to namespace rules page
* Rename namespace-rules to be nspace-rules
* Rename NamespaceTable to be NspaceList
* Create BindingRule adapter and tests
* Create BindingRule serializer and test
* Create BindingRule model and repository
* Add binding-rules mock data
* Create binding-rules router and call endpoint
* Create Binding rules tab
* Create and use BindingView component
* Create empty state for BindingView
* Remove binding rule requestForQueryRecord endpoint and tests
* Update binding rules selector to be monospaced
* Add bind type tooltip
* Create and Tabular-dl styling component
* Update hr tag global styling
* Rename BindingView to BindingList and refactor
* Add translations for bind types tooltip info
* Remove unused endpoint
* Refactor based on review notes
* Update Certificate to be monospaced
* Add empty states for claim and list claim mappings
* Update the styling of empty state actions block
* Update mocked PEM certificate format
* Update list items to be linkable to auth-methods show
* Add general, namespace, and binding sub-routes
* Remove namespace and binding tabs to be done separately
* Update auth-method byId endpoint
* Style the show auth-method kubernetes type
* Finish Kubernetes auth-method type styling
* OIDC and JWT auth-method styling
* Create consul-auth-method-view component
* Add navigation test for auth-methods
* Create Certificate component
This commit use the internal authorize endpoint along wiht ember-can to further restrict user access to certain UI features and navigational elements depending on the users ACL token
* Create mock-api endpoints for auth-methods
* Implement auth-method endpoints and model with tests
* Create route and tab for auth-methods
* Create auth-method list and type components with styles
* Add JWT and OIDC svg logos to codebase
* Add brand translations
* Add SearchBar to Auth Methods
* Add acceptance test for Auth Methods UI
* Skip auth method repo test
* Changes from review notes
* Fixup auth-method modela and mock-data
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Skip repo test
* Fix to breaking serializer test
* Implement auth-method endpoints and model with tests
* Add acceptance test for Auth Methods UI
* Update SearhBar with rebased changes
* Add filterBy source and sortBy max token ttl
* Update to SortBy MethodName
* Update UI acceptance tests
* Update mock data DisplayNames
* Fix to breaking serializer test
* Update class for search
* Add auth-methods link to sidebar
* Fixup PR review notes
* Fixup review notes
* Only show OIDC filter with enterprise
* Update conditionals for MaxTokenTTL & TokenLocality
* Refactor
* ui: Convert Service.GatewayConfig to a model fragment
We added the ember-intl addon, which has its own format-number helper.
We replaced our own similarly named helper with this one, but the
ember-intl one is far stricter and errors if the arguments passed are
undefined. Our previously one would cope with this.
We'd rather continue to use the stricter ember-intl helper, so here we
convert the GatewayConfig property to a model fragment so that we can
give the GatewayConfig.AssociatedServices property a default zero value.
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
* ui: Add functionality to metrics mocks:
1. More randomness during blocking queries
2. NaN and undefined values that come from prometheus
3. General trivial amends to bring things closer to the style of the
project
* Provider should always provide data as a string or undefined
* Use a placeholder `-` if the metrics endpoint responds with undefined data
* Add consul-api-double under api
* Update config to reflect api change
* Remove consul-api-double as a dependency
* api -> mock-api
* Fixup mocks path for staging
