registerSchema creates some indirection which is not necessary in this
case. newDBSchema can call each of the tables.
Enterprise tables can be added from the existing withEnterpriseSchema
shim.
This allows setting ForceWithoutCrossSigning when reconfiguring the CA
for any provider, in order to forcibly move to a new root in cases where
the old provider isn't reachable or able to cross-sign for whatever
reason.
This way we only have to wait for the serf barrier to pass once before
we can make use of federation state APIs Without this patch every
restart needs to re-compute the change.
Deleting from memdb inside an interation can cause a panic from Iterator.Next. This
case is technically safe (for now) because the iterator is using the root radix tree
not a modified one.
However this could break at any time if someone adds an insert or delete to the coordinates table
before this place in the function.
It also sets a bad example, because generally deletes in an interator are not safe. So this
commit uses the pattern we have in other places to move the deletes out of the iteration.
After fixing that bug I uncovered a couple more:
Fix an issue where we might try to cross sign a cert when we never had a valid root.
Fix a potential issue where reconfiguring the CA could cause either the Vault or AWS PCA CA providers to delete resources that are still required by the new incarnation of the CA.
Using withEnterpriseSchema() we can apply any enterprise schema changes
with a single shim, removing the need to duplicate all of the table
definitions.
Also move all the catalog schemas to a new file to shrink catalog.go a bit.
I believe this commit also fixes a bug. Previously RPCMaxConnsPerClient was not being re-read from the RuntimeConfig, so passing it to Server.ReloadConfig was never changing the value.
Also improve the test runtime by not doing a lot of unnecessary work.
* Fix bug in usage metrics that caused a negative count to occur
There were a couple of instances were usage metrics would do the wrong
thing and result in incorrect counts, causing the count to attempt to
decrement below zero and return an error. The usage metrics did not
account for various places where a single transaction could
delete/update/add multiple service instances at once.
We also remove the error when attempting to decrement below zero, and
instead just make sure we do not accidentally underflow the unsigned
integer. This is a more graceful failure than returning an error and not
allowing a transaction to commit.
* Add changelog
These types are used as values (not pointers) in other structs. Using a pointer receiver causes
problems when the value is printed. fmt will not call the String method if it is passed a value
and the String method has a pointer receiver. By using a value receiver the correct string is printed.
Also remove some unused methods.
This way we only have to wait for the serf barrier to pass once before
we can upgrade to v2 acls. Without this patch every restart needs to
re-compute the change, and potentially if a stray older node joins after
a migration it might regress back to v1 mode which would be problematic.
This can happen when one other node in the cluster such as a client is unable to communicate with the leader server and sees it as failed. When that happens its failing status eventually gets propagated to the other servers in the cluster and eventually this can result in RPCs returning “No cluster leader” error.
That error is misleading and unhelpful for determing the root cause of the issue as its not raft stability but rather and client -> server networking issue. Therefore this commit will add a new error that will be returned in that case to differentiate between the two cases.
Previously the tokens would fail to insert into the secondary's state
store because the AuthMethod field of the ACLToken did not point to a
known auth method from the primary.
Add a skip condition to all tests slower than 100ms.
This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests
With this change:
```
$ time go test -count=1 -short ./agent
ok github.com/hashicorp/consul/agent 0.743s
real 0m4.791s
$ time go test -count=1 -short ./agent/consul
ok github.com/hashicorp/consul/agent/consul 4.229s
real 0m8.769s
```
* server: fix panic when deleting a non existent intention
* add changelog
* Always return an error when deleting non-existent ixn
Co-authored-by: freddygv <gh@freddygv.xyz>
A vulnerability was identified in Consul and Consul Enterprise (“Consul”) such that operators with `operator:read` ACL permissions are able to read the Consul Connect CA configuration when explicitly configured with the `/v1/connect/ca/configuration` endpoint, including the private key. This allows the user to effectively privilege escalate by enabling the ability to mint certificates for any Consul Connect services. This would potentially allow them to masquerade (receive/send traffic) as any service in the mesh.
--
This PR increases the permissions required to read the Connect CA's private key when it was configured via the `/connect/ca/configuration` endpoint. They are now `operator:write`.
* ci: stop building darwin/386 binaries
Go 1.15 drops support for 32-bit binaries on Darwin https://golang.org/doc/go1.15#darwin
* tls: ConnectionState::NegotiatedProtocolIsMutual is deprecated in Go 1.15, this value is always true
* correct error messages that changed slightly
* Completely regenerate some TLS test data
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
The Intention.Apply RPC is quite large, so this PR attempts to break it down into smaller functions and dissolves the pre-config-entry approach to the breakdown as it only confused things.
Header is: X-Consul-Default-ACL-Policy=<allow|deny>
This is of particular utility when fetching matching intentions, as the
fallthrough for a request that doesn't match any intentions is to
enforce using the default acl policy.
The Catalog, Config Entry, KV and Session resources potentially re-validate the input as its coming in. We need to prevent snapshot restoration failures due to missing namespaces or namespaces that are being deleted in enterprise.
1. do a state store query to list intentions as the agent would do over in `agent/proxycfg` backing `agent/xds`
2. upgrade the database and do a fresh `service-intentions` config entry write
3. the blocking query inside of the agent cache in (1) doesn't notice (2)
Makes Payload a type with FilterByKey so that Payloads can implement
filtering by key. With this approach we don't need to expose a Namespace
field on Event, and we don't need to invest micro formats or require a
bunch of code to be aware of exactly how the key field is encoded.
The output of the previous assertions made it impossible to debug the tests without code changes.
With go-cmp comparing the entire slice we can see the full diffs making it easier to debug failures.
Previously config entries sharing a kind & name but in different
namespaces could occasionally cause "stuck states" in replication
because the namespace fields were ignored during the differential
comparison phase.
Example:
Two config entries written to the primary:
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
Under the covers these both get saved to memdb, so they are sorted by
all 3 components (kind,name,namespace) during natural iteration. This
means that before the replication code does it's own incomplete sort,
the underlying data IS sorted by namespace ascending (bar comes before
foo).
After one pass of replication the primary and secondary datacenters have
the same set of config entries present. If
"kind=A,name=web,namespace=bar" were to be deleted, then things get
weird. Before replication the two sides look like:
primary: [
kind=A,name=web,namespace=foo
]
secondary: [
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
]
The differential comparison phase walks these two lists in sorted order
and first compares "kind=A,name=web,namespace=foo" vs
"kind=A,name=web,namespace=bar" and falsely determines they are the SAME
and are thus cause an update of "kind=A,name=web,namespace=foo". Then it
compares "<nothing>" with "kind=A,name=web,namespace=foo" and falsely
determines that the latter should be DELETED.
During reconciliation the deletes are processed before updates, and so
for a brief moment in the secondary "kind=A,name=web,namespace=foo" is
erroneously deleted and then immediately restored.
Unfortunately after this replication phase the final state is identical
to the initial state, so when it loops around again (rate limited) it
repeats the same set of operations indefinitely.
Required also converting some of the transaction functions to WriteTxn
because TxnRO() called the same helper as TxnRW.
This change allows us to return a memdb.Txn for read-only txn instead of
wrapping them with state.txn.
* Consul Service meta wrongly computes and exposes non_voter meta
In Serf Tags, entreprise members being non-voters use the tag
`nonvoter=1`, not `non_voter = false`, so non-voters in members
were wrongly displayed as voter.
Demonstration:
```
consul members -detailed|grep voter
consul20-hk5 10.200.100.110:8301 alive acls=1,build=1.8.4+ent,dc=hk5,expect=3,ft_fs=1,ft_ns=1,id=xxxxxxxx-5629-08f2-3a79-10a1ab3849d5,nonvoter=1,port=8300,raft_vsn=3,role=consul,segment=<all>,use_tls=1,vsn=2,vsn_max=3,vsn_min=2,wan_join_port=8302
```
* Added changelog
* Added changelog entry
Previously, we would emit service usage metrics both with and without a
namespace label attached. This is problematic in the case when you want
to aggregate metrics together, i.e. "sum(consul.state.services)". This
would cause services to be counted twice in that aggregate, once via the
metric emitted with a namespace label, and once in the metric emited
without any namespace label.
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.
This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
This adds a new very tiny memdb table and corresponding raft operation
for updating a very small effective map[string]string collection of
"system metadata". This can persistently record a fact about the Consul
state machine itself.
The first use of this feature will come in a later PR.
Reduce Jitter to one function
Rename NewRetryWaiter
Fix a bug in calculateWait where maxWait was applied before jitter, which would make it
possible to wait longer than maxWait.
This really only matters for unit tests, since typically if an agent shuts down its server, it follows that up by exiting the process, which would also clean up all of the networking anyway.
The subscribe endpoint needs to be able to inspect the payload to filter
events, and convert them into the protobuf types.
Use the protobuf CatalogOp type for the operation field, for now. In the
future if we end up with multiple interfaces we should be able to remove
the protobuf dependency by changing this to an int32 and adding a test
for the mapping between the values.
Make the value of the payload a concrete type instead of interface{}. We
can create other payloads for other event types.
Rename GRPCClient to ClientConnPool. This type appears to be more of a
conn pool than a client. The clients receive the connections from this
pool.
Reduce some dependencies by adjusting the interface baoundaries.
Remove the need to create a second slice of Servers, just to pick one and throw the rest away.
Unexport serverResolver, it is not used outside the package.
Use a RWMutex for ServerResolverBuilder, some locking is read-only.
Add more godoc.
* fix lessThanHalfTime
* get lock for CAProvider()
* make a var to relate both vars
* rename to getCAProviderWithLock
* move CertificateTimeDriftBuffer to agent/connect/ca
In an upcoming change we will need to pass a grpc.ClientConnPool from
BaseDeps into Server. While looking at that change I noticed all of the
existing consulOption fields are already on BaseDeps.
Instead of duplicating the fields, we can create a struct used by
agent/consul, and use that struct in BaseDeps. This allows us to pass
along dependencies without translating them into different
representations.
I also looked at moving all of BaseDeps in agent/consul, however that
created some circular imports. Resolving those cycles wouldn't be too
bad (it was only an error in agent/consul being imported from
cache-types), however this change seems a little better by starting to
introduce some structure to BaseDeps.
This change is also a small step in reducing the scope of Agent.
Also remove some constants that were only used by tests, and move the
relevant comment to where the live configuration is set.
Removed some validation from NewServer and NewClient, as these are not
really runtime errors. They would be code errors, which will cause a
panic anyway, so no reason to handle them specially here.
secondaryIntermediateCertRenewalWatch was using `retryLoopBackoff` to
renew the intermediate certificate. Once it entered the inner loop and
started `retryLoopBackoff` it would never leave that.
`retryLoopBackoffAbortOnSuccess` will return when renewing is
successful, like it was intended originally.
The nodeCheck slice was being used as the first arg in append, which in some cases will modify the array backing the slice. This would lead to service checks for other services in the wrong event.
Also refactor some things to reduce the arguments to functions.
Creating a new readTxn does not work because it will not see the newly created objects that are about to be committed. Instead use the active write Txn.
Whenever an upsert/deletion of a config entry happens, within the open
state store transaction we speculatively test compile all discovery
chains that may be affected by the pending modification to verify that
the write would not create an erroneous scenario (such as splitting
traffic to a subset that did not exist).
If a single discovery chain evaluation references two config entries
with the same kind and name in different namespaces then sometimes the
upsert/deletion would be falsely rejected. It does not appear as though
this bug would've let invalid writes through to the state store so the
correction does not require a cleanup phase.
This commit refactors the state store usage code to track unique service
name changes on transaction commit. This means we only need to lookup
usage entries when reading the information, as opposed to iterating over
a large number of service indices.
- Take into account a service instance's name being changed
- Do not iterate through entire list of service instances, we only care
about whether there is 0, 1, or more than 1.
We add a WriteTxn interface for use in updating the usage memdb table,
with the forward-looking prospect of incrementally converting other
functions to accept interfaces.
As well, we use the ReadTxn in new usage code, and as a side effect
convert a couple of existing functions to use that interface as well.
Using the newly provided state store methods, we periodically emit usage
metrics from the servers.
We decided to emit these metrics from all servers, not just the leader,
because that means we do not have to care about leader election flapping
causing metrics turbulence, and it seems reasonable for each server to
emit its own view of the state, even if they should always converge
rapidly.
During gossip encryption key rotation it would be nice to be able to see if all nodes are using the same key. This PR adds another field to the json response from `GET v1/operator/keyring` which lists the primary keys in use per dc. That way an operator can tell when a key was successfully setup as primary key.
Based on https://github.com/hashicorp/serf/pull/611 to add primary key to list keyring output:
```json
[
{
"WAN": true,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 6,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"NumNodes": 6
},
{
"WAN": false,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 8,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
},
{
"WAN": false,
"Datacenter": "dc1",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 3,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
}
]
```
I intentionally did not change the CLI output because I didn't find a good way of displaying this information. There are a couple of options that we could implement later:
* add a flag to show the primary keys
* add a flag to show json output
Fixes#3393.
Fixes#8466
Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)
If you were to do these in a different order, it would fail without a
crash:
1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
protocol mismatch)
This PR introduces the missing validation. The two new behaviors are:
1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
message about protocol mismatch)
In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
* changes some functions to return data instead of modifying pointer
arguments
* renames globalRPC() to keyringRPCs() to make its purpose more clear
* restructures KeyringOperation() to make it more understandable
NotifyShutdown was only used for testing. Now that t.Cleanup exists, we
can use that instead of attaching cleanup to the Server shutdown.
The Autopilot test which used NotifyShutdown doesn't need this
notification because Shutdown is synchronous. Waiting for the function
to return is equivalent.
Ensure that enabling AutoConfig sets the tls configurator properly
This also refactors the TLS configurator a bit so the naming doesn’t imply only AutoEncrypt as the source of the automatically setup TLS cert info.
Most of the groundwork was laid in previous PRs between adding the cert-monitor package to extracting the logic of signing certificates out of the connect_ca_endpoint.go code and into a method on the server.
This also refactors the auto-config package a bit to split things out into multiple files.
Replaces #7559
Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case.
Attaching log output from background goroutines also cause data races. If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race.
The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long.
This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful.
All of the logs are printed from the test goroutine, so they should be associated with the correct test.
Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly.
Related:
https://github.com/golang/go/issues/38458 (may be fixed in go1.15)
https://github.com/golang/go/issues/38382#issuecomment-612940030
The fallback method would still work but it would get into a state where it would let the certificate expire for 10s before getting a new one. And the new one used the less secure RPC endpoint.
This is also a pretty large refactoring of the auto encrypt code. I was going to write some tests around the certificate monitoring but it was going to be impossible to get a TestAgent configured in such a way that I could write a test that ran in less than an hour or two to exercise the functionality.
Moving the certificate monitoring into its own package will allow for dependency injection and in particular mocking the cache types to control how it hands back certificates and how long those certificates should live. This will allow for exercising the main loop more than would be possible with it coupled so tightly with the Agent.
When the race detector is enabled we see this test fail occasionally. The reordering of execution seems to make it possible for the snapshot splice to happen before any events are published to the topicBuffers.
We can handle this case in the test the same way it is handled by a subscription, by proceeding to the next event.
This change was mostly automated with the following
First generate a list of functions with:
git grep -o 'Store) \([^(]\+\)(tx \*txn' ./agent/consul/state | awk '{print $2}' | grep -o '^[^(]\+'
Then the list was curated a bit with trial/error to remove and add funcs
as necessary.
Finally the replacement was done with:
dir=agent/consul/state
file=${1-funcnames}
while read fn; do
echo "$fn"
sed -i -e "s/(s \*Store) $fn(/$fn(/" $dir/*.go
sed -i -e "s/s\.$fn(/$fn(/" $dir/*.go
sed -i -e "s/s\.store\.$fn(/$fn(/" $dir/*.go
done < $file
Making these functions allows them to be used without introducing
an artificial dependency on the struct. Many of these will be called
from streaming Event processors, which do not have a store.
This change is being made ahead of the streaming work to get to reduce
the size of the streaming diff.
Move the subscription context to Next. context.Context should generally
never be stored in a struct because it makes that struct only valid
while the context is valid. This is rarely obvious from the caller.
Adds a forceClosed channel in place of the old context, and uses the new
context as a way for the caller to stop the Subscription blocking.
Remove some recursion out of bufferImte.Next. The caller is already looping so we can continue
in that loop instead of recursing. This ensures currentItem is updated immediately (which probably
does not matter in practice), and also removes the chance that we overflow the stack.
NextNoBlock and FollowAfter do not need to handle bufferItem.Err, the caller already
handles it.
Moves filter to a method to simplify Next, and more explicitly separate filtering from looping.
Also improve some godoc
Only unwrap itemBuffer.Err when necessary
EventPublisher was receiving TopicHandlers, which had a couple of
problems:
- ChangeProcessors were being grouped by Topic, but they completely
ignored the topic and were performed on every change
- ChangeProcessors required EventPublisher to be aware of database
changes
By moving ChangeProcesors out of EventPublisher, and having Publish
accept events instead of changes, EventPublisher no longer needs to
be aware of these things.
Handlers is now only SnapshotHandlers, which are still mapped by Topic.
Also allows us to remove the small 'db' package that had only two types.
They can now be unexported types in state.
The EventPublisher is the central hub of the PubSub system. It is toughly coupled with much of
stream. Some stream internals were exported exclusively for EventPublisher.
The two Subscribe cases (with or without index) were also awkwardly split between two packages. By
moving EventPublisher into stream they are now both in the same package (although still in different files).
Also store the index in Changes instead of the Txn.
This change is in preparation for movinng EventPublisher to the stream package, and
making handleACLUpdates async once again.
It is critical that Unsubscribe be called with the same pointer to a
SubscriptionRequest that was used to create the Subscription. The
docstring made that clear, but it sill allowed a caler to get it wrong by
creating a new SubscriptionRequest.
By hiding this detail from the caller, and only exposing an Unsubscribe
method, it should be impossible to fail to Unsubscribe.
Also update some godoc strings.
Use a separate lock for subscriptions.ByToken to allow it to happen synchronously
in the commit flow.
This removes the need to create a new txn for the goroutine, and removes
the need for EventPublisher to contain a reference to DB.
Many of the fields are only needed in one place, and by using a closure
they can be removed from the struct. This reduces the scope of the variables
making it esier to see how they are used.
Otherwise the test will run with exactly the same values each time.
By printing the seed we can attempt to reproduce the test by adding an env var to override the seed
Make topicRegistry use functions instead of unbound methods
Use a regular memDB in EventPublisher to remove a reference cycle
Removes the need for EventPublisher to use a store
Also remove secretHash, which was used to hash tokens. We don't expose
these tokens anywhere, so we can use the string itself instead of a
Hash.
Fix acl_events_test.go for storing a structs type.
This is instead of having the AutoConfigBackend interface provide functions for retrieving them.
NOTE: the config is not reloadable. For now this is fine as we don’t look at any reloadable fields. If that changes then we should provide a way to make it reloadable.
In all cases (oss/ent, client/server) this method was returning a value from config. Since the
value is consistent, it doesn't need to be part of the delegate interface.
A query made with AllowNotModifiedResponse and a MinIndex, where the
result has the same Index as MinIndex, will return an empty response
with QueryMeta.NotModified set to true.
Co-authored-by: Pierre Souchay <pierresouchay@users.noreply.github.com>
The initial auto encrypt CSR wasn’t containing the user supplied IP and DNS SANs. This fixes that. Also We were configuring a default :: IP SAN. This should be ::1 instead and was fixed.
Highlights:
- add new endpoint to query for intentions by exact match
- using this endpoint from the CLI instead of the dump+filter approach
- enforcing that OSS can only read/write intentions with a SourceNS or
DestinationNS field of "default".
- preexisting OSS intentions with now-invalid namespace fields will
delete those intentions on initial election or for wildcard namespaces
an attempt will be made to downgrade them to "default" unless one
exists.
- also allow the '-namespace' CLI arg on all of the intention subcommands
- update lots of docs
We needed to pass a cancellable context into the limiter.Wait instead of context.Background. So I made the func take a context instead of a chan as most places were just passing through a Done chan from a context anyways.
Fix go routine leak in the gateway locator
There are a couple of things in here.
First, just like auto encrypt, any Cluster.AutoConfig RPC will implicitly use the less secure RPC mechanism.
This drastically modifies how the Consul Agent starts up and moves most of the responsibilities (other than signal handling) from the cli command and into the Agent.
Right now this is only hooked into the insecure RPC server and requires JWT authorization. If no JWT authorizer is setup in the configuration then we inject a disabled “authorizer” to always report that JWT authorization is disabled.
While upgrading servers to a new version, I saw that metadata of
existing servers are not upgraded, so the version and raft meta
is not up to date in catalog.
The only way to do it was to:
* update Consul server
* make it leave the cluster, then metadata is accurate
That's because the optimization to avoid updating catalog does
not take into account metadata, so no update on catalog is performed.
And fix the 'value not used' issues.
Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).
Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
* Fixes#5606: Tokens converted from legacy ACLs get their Hash computed
This allows new style token replication to work for legacy tokens as well when they change.
* tests: fix timestamp comparison
Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
Found using staticcheck.
binary.Write does not accept int types without a size. The error from binary.Write was ignored, so we never saw this error. Casting the data to uint64 produces a correct hash.
Also deprecate the Default{Addr,Port} fields, and prevent them from being encoded. These fields will always be empty and are not used.
Removing these would break backwards compatibility, so they are left in place for now.
Co-authored-by: Hans Hasselberg <me@hans.io>
The ACL.GetPolicy RPC endpoint was supposed to return the “parent” policy and not always the default policy. In the case of legacy management tokens the parent policy was supposed to be “manage”. The result of us not sending this properly was that operations that required specifically a management token such as saving a snapshot would not work in secondary DCs until they were upgraded.
* testing: replace most goe/verify.Values with require.Equal
One difference between these two comparisons is that go/verify considers
nil slices/maps to be equal to empty slices/maps, where as testify/require
does not, and does not appear to provide any way to enable that behaviour.
Because of this difference some expected values were changed from empty
slices to nil slices, and some calls to verify.Values were left.
* Remove github.com/pascaldekloe/goe/verify
Reduce the number of assertion packages we use from 2 to 1
In the past TLS usage was enforced with these variables, but these days
this decision is made by TLSConfigurator and there is no reason to keep
using the variables.
The version field has been used to decide which multiplexing to use. It
was introduced in 2457293dceec95ecd12ef4f01442e13710ea131a. But this is
6y ago and there is no need for this differentiation anymore.
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.
In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
The main fix here is to always union the `primary-gateways` list with
the list of mesh gateways in the primary returned from the replicated
federation states list. This will allow any replicated (incorrect) state
to be supplemented with user-configured (correct) state in the config
file. Eventually the game of random selection whack-a-mole will pick a
winning entry and re-replicate the latest federation states from the
primary. If the user-configured state is actually the incorrect one,
then the same eventual correct selection process will work in that case,
too.
The secondary fix is actually to finish making wanfed-via-mgws actually
work as originally designed. Once a secondary datacenter has replicated
federation states for the primary AND managed to stand up its own local
mesh gateways then all of the RPCs from a secondary to the primary
SHOULD go through two sets of mesh gateways to arrive in the consul
servers in the primary (one hop for the secondary datacenter's mesh
gateway, and one hop through the primary datacenter's mesh gateway).
This was neglected in the initial implementation. While everything
works, ideally we should treat communications that go around the mesh
gateways as just provided for bootstrapping purposes.
Now we heuristically use the success/failure history of the federation
state replicator goroutine loop to determine if our current mesh gateway
route is working as intended. If it is, we try using the local gateways,
and if those don't work we fall back on trying the primary via the union
of the replicated state and the go-discover configuration flags.
This can be improved slightly in the future by possibly initializing the
gateway choice to local on startup if we already have replicated state.
This PR does not address that improvement.
Fixes#7339
Errors are values. We can use the error value to identify the 'comparison failed' case which makes the function easier to use and should make it harder to miss handle the error case
Based on work done in https://github.com/hashicorp/memberlist/pull/196
this allows to restrict the IP ranges that can join a given Serf cluster
and be a member of the cluster.
Restrictions on IPs can be done separatly using 2 new differents flags
and config options to restrict IPs for LAN and WAN Serf.
Handling errors at the end of a log switch/case block is somewhat
brittle. This block included a couple cases where errors were ignored,
but it was not obvious the way it was written.
This change moves all error handling into each case block. There is
still potentially one case where err is ignored, which will be handled
in a follow up.
Some of these problems are minor (unused vars), but others are real bugs (ignored errors).
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>
This commit converts the previous error into just a Warn-level log
message. By returning an error when the requested service was not a
gateway, we did not appropriately update envoy because the cache Fetch
returned an error and thus did not propagate the update through proxycfg
and xds packages.
Previously this happened to be using the method on the Server/Client that was meant to allow the ACLResolver to locally resolve tokens. On Servers that had tokens (primary or secondary dc + token replication) this function would lookup the token from raft and return the ACLIdentity. On clients this was always a noop. We inadvertently used this function instead of creating a new one when we added logging accessor ids for permission denied RPC requests.
With this commit, a new method is used for resolving the identity properly via the ACLResolver which may still resolve locally in the case of being on a server with tokens but also supports remote token resolution.
* Return early from updateGatewayServices if nothing to update
Previously, we returned an empty slice of gatewayServices, which caused
us to accidentally delete everything in the memdb table
* PR comment and better formatting
We require any non-wildcard services to match the protocol defined in
the listener on write, so that we can maintain a consistent experience
through ingress gateways. This also helps guard against accidental
misconfiguration by a user.
- Update tests that require an updated protocol for ingress gateways
This now requires some type of protocol setting in ingress gateway tests
to ensure the services are not filtered out.
- small refactor to add a max(x, y) function
- Use internal configEntryTxn function and add MaxUint64 to lib
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.
To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.
- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
route configuration when on an ingress gateway. This allows default
services to easily use host header routing
- ingress-gateways have a single route config for each listener
that utilizes domain matching to route to different services.
This is a collection of refactors that make upcoming PRs easier to digest.
The main change is the introduction of the authmethod.Identity struct.
In the one and only current auth method (type=kubernetes) all of the
trusted identity attributes are both selectable and projectable, so they
were just passed around as a map[string]string.
When namespaces were added, this was slightly changed so that the
enterprise metadata can also come back from the login operation, so
login now returned two fields.
Now with some upcoming auth methods it won't be true that all identity
attributes will be both selectable and projectable, so rather than
update the login function to return 3 pieces of data it seemed worth it
to wrap those fields up and give them a proper name.
Also ensure that WatchSets in tests are reset between calls to watchFired.
Any time a watch fires, subsequent calls to watchFired on the same WatchSet
will also return true even if there were no changes.
Previously, if a blocking query called CheckConnectServiceNodes
before the gateway-services memdb table had any entries,
a nil watchCh would be returned when calling serviceTerminatingGatewayNodes.
This means that the blocking query would not fire if a gateway config entry
was added after the watch started.
In cases where the blocking query started on proxy registration,
the proxy could potentially never become aware of an upstream endpoint
if that upstream was going to be represented by a gateway.
On every service registration, we check to see if a service should be
assassociated to a wildcard gateway-service. This fixes an issue where
we did not correctly check to see if the service being registered was a
"typical" service or not.
* Implements a simple, tcp ingress gateway workflow
This adds a new type of gateway for allowing Ingress traffic into Connect from external services.
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Also reduce the log level of some version checking messages on the server as they can be pretty noisy during upgrades and really are more for debugging purposes.
The test had two racy bugs related to memdb references.
The first was when we initially populated data and retained the FederationState objects in a slice. Due to how the `inmemCodec` works these were actually the identical objects passed into memdb.
The second was that the `checkSame` assertion function was reading from memdb and setting the RaftIndexes to zeros to aid in equality checks. This was mutating the contents of memdb which is a no-no.
With this fix, the command:
```
i=0; while /usr/local/bin/go test -count=1 -timeout 30s github.com/hashicorp/consul/agent/consul -run '^(TestReplication_FederationStates)$'; do i=$((i + 1)); printf "$i "; done
```
That used to break on my machine in less than 20 runs is now running 150+ times without any issue.
Might also fix#7575
* Enable filtering language support for the v1/connect/intentions listing API
* Update website for filtering of Intentions
* Update website/source/api/connect/intentions.html.md
This config entry will be used to configure terminating gateways.
It accepts the name of the gateway and a list of services the gateway will represent.
For each service users will be able to specify: its name, namespace, and additional options for TLS origination.
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
* Add Ingress gateway config entry and other relevant structs
* Add api package tests for ingress gateways
* Embed EnterpriseMeta into ingress service struct
* Add namespace fields to api module and test consul config write decoding
* Don't require a port for ingress gateways
* Add snakeJSON and camelJSON cases in command test
* Run Normalize on service's ent metadata
Sadly cannot think of a way to test this in OSS.
* Every protocol requires at least 1 service
* Validate ingress protocols
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
These changes are necessary to ensure advertisement happens correctly even when datacenters are connected via network areas in Consul enterprise.
This also changes how we check if ACLs can be upgraded within the local datacenter. Previously we would iterate through all LAN members. Now we just use the ServerLookup type to iterate through all known servers in the DC.
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
* agent: measure blocking queries
* agent.rpc: update docs to mention we only record blocking queries
* agent.rpc: make go fmt happy
* agent.rpc: fix non-atomic read and decrement with bitwise xor of uint64 0
* agent.rpc: clarify review question
* agent.rpc: today I learned that one must declare all variables before interacting with goto labels
* Update agent/consul/server.go
agent.rpc: more precise comment on `Server.queriesBlocking`
Co-Authored-By: Paul Banks <banks@banksco.de>
* Update website/source/docs/agent/telemetry.html.md
agent.rpc: improve queries_blocking description
Co-Authored-By: Paul Banks <banks@banksco.de>
* agent.rpc: fix some bugs found in review
* add a note about the updated counter behavior to telemetry.md
* docs: add upgrade-specific note on consul.rpc.quer{y,ies_blocking} behavior
Co-authored-by: Paul Banks <banks@banksco.de>
We set RawToString=true so that []uint8 => string when decoding an interface{}.
We set the MapType so that map[interface{}]interface{} decodes to map[string]interface{}.
Add tests to ensure that this doesn't break existing usages.
Fixes#7223
* fix LeaderTest_ChangeNodeID to use StatusLeft and add waitForAnyLANLeave
* unextract the waitFor... fn, simplify, and provide a more descriptive error
Previously this happened to be validating only the chains in the default namespace. Now it will validate all chains in all namespaces when the global proxy-defaults is changed.
* Cleanup the discovery chain compilation route handling
Nothing functionally should be different here. The real difference is that when creating new targets or handling route destinations we use the router config entries name and namespace instead of that of the top level request. Today they SHOULD always be the same but that may not always be the case. This hopefully also makes it easier to understand how the router entries are handled.
* Refactor a small bit of the service manager tests in oss
We used to use the stringHash function to compute part of the filename where things would get persisted to. This has been changed in the core code to calling the StringHash method on the ServiceID type. It just so happens that the new method will output the same value for anything in the default namespace (by design actually). However, logically this filename computation in the test should do the same thing as the core code itself so I updated it here.
Also of note is that newer enterprise-only tests for the service manager cannot use the old stringHash function at all because it will produce incorrect results for non-default namespaces.
The previous value was too conservative and users with many instances
were having problems because of it. This change increases the limit to
8192 which reportedly fixed most of the issues with that.
Related: #4984, #4986, #5050.
* Updates to the Txn API for namespaces
* Update agent/consul/txn_endpoint.go
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Co-authored-by: R.B. Boyer <public@richardboyer.net>
The backing RPC already existed but the endpoint will be useful for other service syncing processes such as consul-k8s as this endpoint can return all services registered with a node regardless of namespacing.
* Increase raft notify buffer.
Fixes https://github.com/hashicorp/consul/issues/6852.
Increasing the buffer helps recovering from leader flapping. It lowers
the chances of the flapping leader to get into a deadlock situation like
described in #6852.
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.
In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
* Add CreateCSRWithSAN
* Use CreateCSRWithSAN in auto_encrypt and cache
* Copy DNSNames and IPAddresses to cert
* Verify auto_encrypt.sign returns cert with SAN
* provide configuration options for auto_encrypt dnssan and ipsan
* rename CreateCSRWithSAN to CreateCSR
* Renamed structs.IntentionWildcard to structs.WildcardSpecifier
* Refactor ACL Config
Get rid of remnants of enterprise only renaming.
Add a WildcardName field for specifying what string should be used to indicate a wildcard.
* Add wildcard support in the ACL package
For read operations they can call anyAllowed to determine if any read access to the given resource would be granted.
For write operations they can call allAllowed to ensure that write access is granted to everything.
* Make v1/agent/connect/authorize namespace aware
* Update intention ACL enforcement
This also changes how intention:read is granted. Before the Intention.List RPC would allow viewing an intention if the token had intention:read on the destination. However Intention.Match allowed viewing if access was allowed for either the source or dest side. Now Intention.List and Intention.Get fall in line with Intention.Matches previous behavior.
Due to this being done a few different places ACL enforcement for a singular intention is now done with the CanRead and CanWrite methods on the intention itself.
* Refactor Intention.Apply to make things easier to follow.
Sometimes, we have lots of errors in cross calls between DCs (several hundreds / sec)
Enrich the log in order to help diagnose the root cause of issue.
Restore a few more service-kind index updates so blocking in ServiceDump works in more cases
Namely one omission was that check updates for dumped services were not
unblocking.
Also adds a ServiceDump state store test and also fix a watch bug with the
normal dump.
Follow-on from #6916
• Renamed EnterpriseACLConfig to just Config
• Removed chained_authorizer_oss.go as it was empty
• Renamed acl.go to errors.go to more closely describe its contents
* Increase number to test ignore. Consul Enterprise has more flags and since we are trying to reduce the differences between both code bases, we are increasing the number in oss. The semantics don't change, it is just a cosmetic thing.
* Introduce agent.initEnterprise for enterprise related hooks.
* Sync test with ent version.
* Fix import order.
* revert error wording.
Ensure we close the Sentinel Evaluator so as not to leak go routines
Fix a bunch of test logging so that various warnings when starting a test agent go to the ltest logger and not straight to stdout.
Various canned ent meta types always return a valid pointer (no more nils). This allows us to blindly deref + assign in various places.
Update ACL index tracking to ensure oss -> ent upgrades will work as expected.
Update ent meta parsing to include function to disallow wildcarding.
* Implement endpoint to query whether the given token is authorized for a set of operations
* Updates to allow for remote ACL authorization via RPC
This is only used when making an authorization request to a different datacenter.
* Update AWS SDK to use PCA features.
* Add AWS PCA provider
* Add plumbing for config, config validation tests, add test for inheriting existing CA resources created by user
* Unparallel the tests so we don't exhaust PCA limits
* Merge updates
* More aggressive polling; rate limit pass through on sign; Timeout on Sign and CA create
* Add AWS PCA docs
* Fix Vault doc typo too
* Doc typo
* Apply suggestions from code review
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Doc fixes; tests for erroring if State is modified via API
* More review cleanup
* Uncomment tests!
* Minor suggested clean ups
* Change CA Configure struct to pass Datacenter through
* Remove connect/ca/plugin as we don't have immediate plans to use it.
We still intend to one day but there are likely to be several changes to the CA provider interface before we do so it's better to rebuild from history when we do that work properly.
* Rename PrimaryDC; fix endpoint in secondary DCs
* Support Connect CAs that can't cross sign
* revert spurios mod changes from make tools
* Add log warning when forcing CA rotation
* Fixup SupportsCrossSigning to report errors and work with Plugin interface (fixes tests)
* Fix failing snake_case test
* Remove misleading comment
* Revert "Remove misleading comment"
This reverts commit bc4db9cabed8ad5d0e39b30e1fe79196d248349c.
* Remove misleading comment
* Regen proto files messed up by rebase
* pass logger through to provider
* test for proper operation of NeedsLogger
* remove public testServer function
* Ooops actually set the logger in all the places we need it - CA config set wasn't and causing segfault
* Fix all the other places in tests where we set the logger
* Allow CA Providers to persist some state
* Update CA provider plugin interface
* Fix plugin stubs to match provider changes
* Update agent/connect/ca/provider.go
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
* Cleanup review comments
* add NeedsLogger to Provider interface
* implements NeedsLogger in default provider
* pass logger through to provider
* test for proper operation of NeedsLogger
* remove public testServer function
* Switch test to actually assert on logging output rather than reflection.
--amend
* Ooops actually set the logger in all the places we need it - CA config set wasn't and causing segfault
* Fix all the other places in tests where we set the logger
* Add TODO comment
* Allow RSA CA certs for consul and vault providers to correctly sign EC leaf certs.
* Ensure key type ad bits are populated from CA cert and clean up tests
* Add integration test and fix error when initializing secondary CA with RSA key.
* Add more tests, fix review feedback
* Update docs with key type config and output
* Apply suggestions from code review
Co-Authored-By: R.B. Boyer <rb@hashicorp.com>
Main Changes:
• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.
Secondary Changes:
• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
If acls have not yet replicated to the secondary then authz requests
will be remotely resolved by the primary. Now these tests explicitly
wait until replication has caught up first.
* ACL Authorizer overhaul
To account for upcoming features every Authorization function can now take an extra *acl.EnterpriseAuthorizerContext. These are unused in OSS and will always be nil.
Additionally the acl package has received some thorough refactoring to enable all of the extra Consul Enterprise specific authorizations including moving sentinel enforcement into the stubbed structs. The Authorizer funcs now return an acl.EnforcementDecision instead of a boolean. This improves the overall interface as it makes multiple Authorizers easily chainable as they now indicate whether they had an authoritative decision or should use some other defaults. A ChainedAuthorizer was added to handle this Authorizer enforcement chain and will never itself return a non-authoritative decision.
* Include stub for extra enterprise rules in the global management policy
* Allow for an upgrade of the global-management policy
* Implement leader routine manager
Switch over the following to use it for go routine management:
• Config entry Replication
• ACL replication - tokens, policies, roles and legacy tokens
• ACL legacy token upgrade
• ACL token reaping
• Intention Replication
• Secondary CA Roots Watching
• CA Root Pruning
Also added the StopAll call into the Server Shutdown method to ensure all leader routines get killed off when shutting down.
This should be mostly unnecessary as `revokeLeadership` should manually stop each one but just in case we really want these to go away (eventually).
This fixes an issue where leaf certificates issued in secondary
datacenters would be reissued very frequently (every ~20 seconds)
because the logic meant to detect root rotation was errantly triggering
because a hash of the ultimate root (in the primary) was being compared
against a hash of the local intermediate root (in the secondary) and
always failing.
In a previous PR I made it so that we had interfaces that would work enough to allow blockingQueries to work. However to complete this we need all fields to be settable and gettable.
Notes:
• If Go ever gets contracts/generics then we could get rid of all the Getters/Setters
• protoc / protoc-gen-gogo are going to generate all the getters for us.
• I copied all the getters/setters from the protobuf funcs into agent/structs/protobuf_compat.go
• Also added JSON marshaling funcs that use jsonpb for protobuf types.
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
The fields in the certs are meant to hold the original binary
representation of this data, not some ascii-encoded version.
The only time we should be colon-hex-encoding fields is for display
purposes or marshaling through non-TLS mediums (like RPC).
* Add build system support for protobuf generation
This is done generically so that we don’t have to keep updating the makefile to add another proto generation.
Note: anything not in the vendor directory and with a .proto extension will be run through protoc if the corresponding namespace.pb.go file is not up to date.
If you want to rebuild just a single proto file you can do so with: make proto-rebuild PROTOFILES=<list of proto files to rebuild>
Providing the PROTOFILES var will override the default behavior of finding all the .proto files.
* Start adding types to the agent/proto package
These will be needed for some other work and are by no means comprehensive.
* Add ability to resolve/fixup the agentpb.ACLLinks structure in the state store.
* Use protobuf marshalling of raft requests instead of msgpack for protoc generated types.
This does not change any encoding of existing types.
* Removed structs package automatically encoding with protobuf marshalling
Instead the caller of raftApply that wants to opt-in to protobuf encoding will have to call `raftApplyProtobuf`
* Run update-vendor to fixup modules.txt
Nothing changed as far as dependencies go but the ordering of modules in that file depends on the time they are first seen and its not alphabetical.
* Rename some things and implement the structs.RPCInfo interface bits
agentpb.QueryOptions and agentpb.WriteRequest implement 3 of the 4 RPCInfo funcs and the new TargetDatacenter message type implements the fourth.
* Use the right encoding function.
* Renamed agent/proto package to agent/agentpb to prevent package name conflicts
* Update modules.txt to fix ordering
* Change blockingQuery to take in interfaces for the query options and meta
* Add %T to error output.
* Add/Update some comments
This should cut down on test flakiness.
Problems handled:
- If you had enough parallel test cases running, the former circular
approach to handling the port block could hand out the same port to
multiple cases before they each had a chance to bind them, leading to
one of the two tests to fail.
- The freeport library would allocate out of the ephemeral port range.
This has been corrected for Linux (which should cover CI).
- The library now waits until a formerly-in-use port is verified to be
free before putting it back into circulation.
* Store primaries root in secondary after intermediate signature
This ensures that the intermediate exists within the CA root stored in raft and not just in the CA provider state. This has the very nice benefit of actually outputting the intermediate cert within the ca roots HTTP/RPC endpoints.
This change means that if signing the intermediate fails it will not set the root within raft. So far I have not come up with a reason why that is bad. The secondary CA roots watch will pull the root again and go through all the motions. So as soon as getting an intermediate CA works the root will get set.
* Make TestAgentAntiEntropy_Check_DeferSync less flaky
I am not sure this is the full fix but it seems to help for me.
When there is an node name conflicts, such messages are displayed within Consul:
`consul.fsm: EnsureRegistration failed: failed inserting node: Error while renaming Node ID: "e1d456bc-f72d-98e5-ebb3-26ae80d785cf": Node name node001 is reserved by node 05f10209-1b9c-b90c-e3e2-059e64556d4a with name node001`
While it is easy to find the node that has reserved the name, it is hard to find
the node trying to aquire the name since it is not registered, because it
is not part of `consul members` output
This PR will display the IP of the offender and solve far more easily those issues.
AutoEncrypt needs the server-port because it wants to talk via RPC. Information from gossip might not be available at that point and thats why the server-port is being used.
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.
Setting ExternalSNI will disable mesh gateway use for that target. It also
disables several service-resolver features that do not make sense for an
external service.
If the entry is updated for reasons other than protocol it is surprising
that the value is explicitly persisted as 'tcp' rather than leaving it
empty and letting it fall back dynamically on the proxy-defaults value.
Add parameter local-only to operator keyring list requests to force queries to only hit local servers (no WAN traffic).
HTTP API: GET /operator/keyring?local-only=true
CLI: consul keyring -list --local-only
Sending the local-only flag with any non-GET/list request will result in an error.
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:
- name: foo
load_assignment:
cluster_name: foo
policy:
overprovisioning_factor: 100000
endpoints:
- priority: 0
lb_endpoints:
- endpoint:
address:
socket_address:
address: 1.2.3.4
port_value: 8080
- priority: 1
lb_endpoints:
- endpoint:
address:
socket_address:
address: 6.7.8.9
port_value: 8080
Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.
If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.
This PR introduces a simpler way around the problem for now:
1. We identify any target of failover that will use mesh gateway mode local or
remote and then further isolate any resolver node in the compiled discovery
chain that has a failover destination set to one of those targets.
2. For each of these resolvers we will perform a small measurement of
comparative healths of the endpoints that come back from the health API for the
set of primary target and serial failover targets. We walk the list of targets
in order and if any endpoint is healthy we return that target, otherwise we
move on to the next target.
3. The CDS and EDS endpoints both perform the measurements in (2) for the
affected resolver nodes.
4. For CDS this measurement selects which TLS SNI field to use for the cluster
(note the cluster is always going to be named for the primary target)
5. For EDS this measurement selects which set of endpoints will populate the
cluster. Priority tiered failover is ignored.
One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.
In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.
Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.
Also removed ability to configure the envoy OverprovisioningFactor.
This should make them better for sending over RPC or the API.
Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.
Other changes:
* inline the compiler option InferDefaults as true
* introduce compiled target config to avoid needing to send back
additional maps of Resolvers; future target-specific compiled state
can go here
* move compiled MeshGateway out of the Resolver and into the
TargetConfig where it makes more sense.
* connect: reconcile how upstream configuration works with discovery chains
The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:
- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.
- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).
- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).
- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).
- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).
If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.
Fixes#6159
Secondary CA initialization steps are:
• Wait until the primary will be capable of signing intermediate certs. We use serf metadata to check the versions of servers in the primary which avoids needing a token like the previous implementation that used RPCs. We require at least one alive server in the primary and the all alive servers meet the version requirement.
• Initialize the secondary CA by getting the primary to sign an intermediate
When a primary dc is configured, if no existing CA is initialized and for whatever reason we cannot initialize a secondary CA the secondary DC will remain without a CA. As soon as it can it will initialize the secondary CA by pulling the primaries roots and getting the primary to sign an intermediate.
This also fixes a segfault that can happen during leadership revocation. There was a spot in the secondaryCARootsWatch that was getting the CA Provider and executing methods on it without nil checking. Under normal circumstances it wont be nil but during leadership revocation it gets nil'ed out. Therefore there is a period of time between closing the stop chan and when the go routine is actually stopped where it could read a nil provider and cause a segfault.
Auto-encrypt meant to fallback to the default port when it wasn't provided, but it hadn't been because of an issue with the error handling. We were checking against an incomplete error value:
"missing port in address" vs "address $HOST: missing port in address"
Additionally, all RPCs to AutoEncrypt.Sign were using a.config.ServerPort, so those were updated to use ports resolved by resolveAddrs, if they are available.
All these changes should have no side-effects or change behavior:
- Use bytes.Buffer's String() instead of a conversion
- Use time.Since and time.Until where fitting
- Drop unnecessary returns and assignment
I can only assume we want to check for the retrieved `updatedToken` to not be
nil, before accessing it below.
`token` can't possibly be nil at this point, as we accessed `token.AccessorID`
just before.
* Ensure the mesh gateway configuration comes back in the api within each upstream
* Add a test for the MeshGatewayConfig in the ToAPI functions
* Ensure we don’t use gateways for dc local connections
* Update the svc kind index for deletions
* Replace the proxycfg.state cache with an interface for testing
Also start implementing proxycfg state testing.
* Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.
Also:
- add back an internal http endpoint to dump a compiled discovery chain for debugging purposes
Before the CompiledDiscoveryChain.IsDefault() method would test:
- is this chain just one resolver step?
- is that resolver step just the default?
But what I forgot to test:
- is that resolver step for the same service that the chain represents?
This last point is important because if you configured just one config
entry:
kind = "service-resolver"
name = "web"
redirect {
service = "other"
}
and requested the chain for "web" you'd get back a **default** resolver
for "other". In the xDS code the IsDefault() method is used to
determine if this chain is "empty". If it is then we use the
pre-discovery-chain logic that just uses data embedded in the Upstream
object (and still lets the escape hatches function).
In the example above that means certain parts of the xDS code were going
to try referencing a cluster named "web..." despite the other parts of
the xDS code maintaining clusters named "other...".
* Retry the creation of the test server three times.
* Reduce the retry timeout for the API wait to 2 seconds, opting to fail faster and start over.
* Remove wait for leader from server creation. This wait can be added on a test by test basis now that the function is being exported.
* Remove wait for anti-entropy sync. This is built into the existing WaitForSerfCheck func, so that can be used if the anti-entropy wait is needed
Previously a sequence of events like:
Start
Stop
Start
Stop
would segfault on the second stop because the original ctx and cancel func were only initialized during the constructor and not during Start.
* Make cluster names SNI always
* Update some tests
* Ensure we check for prepared query types
* Use sni for route cluster names
* Proper mesh gateway mode defaulting when the discovery chain is used
* Ignore service splits from PatchSliceOfMaps
* Update some xds golden files for proper test output
* Allow for grpc/http listeners/cluster configs with the disco chain
* Update stats expectation
maxIndexWatchTxn was only watching the IndexEntry of the max index of all the entries. It needed to watch all of them regardless of which was the max.
Also plumbed the query source through in the proxy config to help better track requests.
The general problem was that a the CA config which contained the trust domain was happening outside of the blocking mechanism so if the client started the blocking query before the primary dcs roots had been set then a state trust domain was being pushed down.
This was fixed here but in the future we should probably fixup the CA initialization code to not initialize the CA config twice when it doesn’t need to.
* Prune Servers from WAN and LAN
* cleaned up and fixed LAN to WAN
* moving things around
* force-leave remove from serfWAN, create pruneSerfWAN
* removed serfWAN remove, reduced complexity, fixed comments
* add another place to remove from serfWAN
* add nil check
* Update agent/consul/server.go
Co-Authored-By: Paul Banks <banks@banksco.de>
With this you should be able to fetch all of the relevant discovery
chain config entries from the state store in one query and then feed
them into the compiler outside of a transaction.
There are a lot of TODOs scattered through here, but they're mostly
around handling fun edge cases and can be deferred until more of the
plumbing works completely.
With ACLs enabled if an agent is wiped and restarted without a leave
it can no longer deregister the services it had previously registered
because it no longer has the tokens the services were registered with.
To remedy that we allow service deregistration from tokens with node
write permission.
* Support for maximum size for Output of checks
This PR allows users to limit the size of output produced by checks at the agent
and check level.
When set at the agent level, it will limit the output for all checks monitored
by the agent.
When set at the check level, it can override the agent max for a specific check but
only if it is lower than the agent max.
Default value is 4k, and input must be at least 1.
If a KVSet is performed but does not update the entry, do not trigger
watches for this key.
This avoids releasing blocking queries for KV values that did not
actually changed.
* Add integration test for central config; fix central config WIP
* Add integration test for central config; fix central config WIP
* Set proxy protocol correctly and begin adding upstream support
* Add upstreams to service config cache key and start new notify watcher if they change.
This doesn't update the tests to pass though.
* Fix some merging logic get things working manually with a hack (TODO fix properly)
* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway
* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does
* Fix up service manageer and API test failures
* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally
* Remove version.go hack - will make integration test fail until release
* Remove unused code from commands and upstream merge
* Re-bump version to 1.5.0
* Add HTTP endpoints for config entry management
* Finish implementing decoding in the HTTP Config entry apply endpoint
* Add CAS operation to the config entry apply endpoint
Also use this for the bootstrapping and move the config entry decoding function into the structs package.
* First pass at the API client for the config entries
* Fixup some of the ConfigEntry APIs
Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well.
Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries.
* Minor API client fixes
* Attempt at some ConfigEntry api client tests
These don’t currently work due to weak typing in JSON
* Get some of the api client tests passing
* Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry
Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing.
* Move MapWalk magic into a binary marshaller instead of JSON.
* Add a MapWalk test
* Get rid of unused func
* Get rid of unused imports
* Fixup some tests now that the decoding from msgpack coerces things into json compat types
* Stub out most of the central config cli
Fully implement the config read command.
* Basic config delete command implementation
* Implement config write command
* Implement config list subcommand
Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output.
* Update command usage
* Update some help usage formatting
* Add the connect enable helper cli command
* Update list command output
* Rename the config entry API client methods.
* Use renamed apis
* Implement config write tests
Stub the others with the noTabs tests.
* Change list output format
Now just simply output 1 line per named config
* Add config read tests
* Add invalid args write test.
* Add config delete tests
* Add config list tests
* Add connect enable tests
* Update some CLI commands to use CAS ops
This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not.
* Fix up the HTTP API CAS tests as I realized they weren’t testing what they should.
* Update config entry rpc tests to properly test CAS
* Fix up a few more tests
* Fix some tests that using ConfigEntries.Apply
* Update config_write_test.go
* Get rid of unused import
When receiving a serf faild message for a node which is not in the
catalog, do not perform a register request to set is serf heath to
critical as it could overwrite the node information and services if it
was renamed.
Fixes : #5518
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.
This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.
This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
This is mainly to avoid having the API return "0001-01-01T00:00:00Z" as
a value for the ExpirationTime field when it is not set. Unfortunately
time.Time doesn't respect the json marshalling "omitempty" directive.
These act like a special cased version of a Policy Template for granting
a token the privileges necessary to register a service and its connect
proxy, and read upstreams from the catalog.
Fixes: #4222
# Data Filtering
This PR will implement filtering for the following endpoints:
## Supported HTTP Endpoints
- `/agent/checks`
- `/agent/services`
- `/catalog/nodes`
- `/catalog/service/:service`
- `/catalog/connect/:service`
- `/catalog/node/:node`
- `/health/node/:node`
- `/health/checks/:service`
- `/health/service/:service`
- `/health/connect/:service`
- `/health/state/:state`
- `/internal/ui/nodes`
- `/internal/ui/services`
More can be added going forward and any endpoint which is used to list some data is a good candidate.
## Usage
When using the HTTP API a `filter` query parameter can be used to pass a filter expression to Consul. Filter Expressions take the general form of:
```
<selector> == <value>
<selector> != <value>
<value> in <selector>
<value> not in <selector>
<selector> contains <value>
<selector> not contains <value>
<selector> is empty
<selector> is not empty
not <other expression>
<expression 1> and <expression 2>
<expression 1> or <expression 2>
```
Normal boolean logic and precedence is supported. All of the actual filtering and evaluation logic is coming from the [go-bexpr](https://github.com/hashicorp/go-bexpr) library
## Other changes
Adding the `Internal.ServiceDump` RPC endpoint. This will allow the UI to filter services better.
* First conversion
* Use serf 0.8.2 tag and associated updated deps
* * Move freeport and testutil into internal/
* Make internal/ its own module
* Update imports
* Add replace statements so API and normal Consul code are
self-referencing for ease of development
* Adapt to newer goe/values
* Bump to new cleanhttp
* Fix ban nonprintable chars test
* Update lock bad args test
The error message when the duration cannot be parsed changed in Go 1.12
(ae0c435877d3aacb9af5e706c40f9dddde5d3e67). This updates that test.
* Update another test as well
* Bump travis
* Bump circleci
* Bump go-discover and godo to get rid of launchpad dep
* Bump dockerfile go version
* fix tar command
* Bump go-cleanhttp
* Make Connect health queryies unblock correctly in all cases and use optimal number of watch chans. Fixes#5506.
* Node check test cases and clearer bug test doc
* Comment update
Refs #4984.
Watching chans for every node we touch in a health query is wasteful. In #4984 it shows that if there are more than 682 service instances we always fallback to watching all services which kills performance.
We already have a record in MemDB that is reliably update whenever the service health result should change thanks to per-service watch indexes.
So in general, provided there is at least one service instances and we actually have a service index for it (we always do now) we only ever need to watch a single channel.
This saves us from ever falling back to the general index and causing the performance cliff in #4984, but it also means fewer goroutines and work done for every blocking health query.
It also saves some allocations made during the query because we no longer have to populate a WatchSet with 3 chans per service instance which saves the internal map allocation.
This passes all state store tests except the one that explicitly checked for the fallback behaviour we've now optimized away and in general seems safe.
acl: reduce complexity of token resolution process with alternative singleflighting
Switches acl resolution to use golang.org/x/sync/singleflight. For the
identity/legacy lookups this is a drop-in replacement with the same
overall approach to request coalescing.
For policies this is technically a change in behavior, but when
considered holistically is approximately performance neutral (with the
benefit of less code).
There are two goals with this blob of code (speaking specifically of
policy resolution here):
1) Minimize cross-DC requests.
2) Minimize client-to-server LAN requests.
The previous iteration of this code was optimizing for the case of many
possibly different tokens being resolved concurrently that have a
significant overlap in linked policies such that deduplication would be
worth the complexity. While this is laudable there are some things to
consider that can help to adjust expectations:
1) For v1.4+ policies are always replicated, and once a single policy
shows up in a secondary DC the replicated data is considered
authoritative for requests made in that DC. This means that our
earlier concerns about minimizing cross-DC requests are irrelevant
because there will be no cross-DC policy reads that occur.
2) For Server nodes the in-memory ACL policy cache is capped at zero,
meaning it has no caching. Only Client nodes run with a cache. This
means that instead of having an entire DC's worth of tokens (what a
Server might see) that can have policy resolutions coalesced these
nodes will only ever be seeing node-local token resolutions. In a
reasonable worst-case scenario where a scheduler like Kubernetes has
"filled" a node with Connect services, even that will only schedule
~100 connect services per node. If every service has a unique token
there will only be 100 tokens to coalesce and even then those requests
have to occur concurrently AND be hitting an empty consul cache.
Instead of seeing a great coalescing opportunity for cutting down on
redundant Policy resolutions, in practice it's far more likely given
node densities that you'd see requests for the same token concurrently
than you would for two tokens sharing a policy concurrently (to a degree
that would warrant the overhead of the current variation of
singleflighting.
Given that, this patch switches the Policy resolution process to only
singleflight by requesting token (but keeps the cache as by-policy).
This PR introduces reloading tls configuration. Consul will now be able to reload the TLS configuration which previously required a restart. It is not yet possible to turn TLS ON or OFF with these changes. Only when TLS is already turned on, the configuration can be reloaded. Most importantly the certificates and CAs.
Node updates were not updating the service indexes, which are used for
service related queries. This caused the X-Consul-Index to stay the same
after a node update as seen from a service query even though the node
data is returned in heath queries. If that happened in between queries
the client would miss this change.
We now update the indexes of the services on the node when it is
updated.
Fixes: #5450
In TestServer_LANReap autopilot is running, so the alternate flow
through the serf reaping function is possible. In that situation the
ReconnectTimeout is not relevant so for parity also override the
TombstoneTimeout value as well.
For additional parity update the TestServer_WANReap and
TestClient_LANReap versions of this test in the same way even though
autopilot is irrelevant here .
Fix error in detecting raft replication errors.
Detect redacted token secrets and prevent attempting to insert.
Add a Redacted field to the TokenBatchRead and TokenRead RPC endpoints
This will indicate whether token secrets have been redacted.
Ensure any token with a redacted secret in secondary datacenters is removed.
Test that redacted tokens cannot be replicated.
Previously we were fixing up the token links directly on the *ACLToken returned by memdb. This invalidated some assumptions that a snapshot is immutable as well as potentially being able to cause a crash.
The fix here is to give the policy link fixing function copy on write semantics. When no fixes are necessary we can return the memdb object directly, otherwise we copy it and create a new list of links.
Eventually we might find a better way to keep those policy links in sync but for now this fixes the issue.
This PR adds two features which will be useful for operators when ACLs are in use.
1. Tokens set in configuration files are now reloadable.
2. If `acl.enable_token_persistence` is set to `true` in the configuration, tokens set via the `v1/agent/token` endpoint are now persisted to disk and loaded when the agent starts (or during configuration reload)
Note that token persistence is opt-in so our users who do not want tokens on the local disk will see no change.
Some other secondary changes:
* Refactored a bunch of places where the replication token is retrieved from the token store. This token isn't just for replicating ACLs and now it is named accordingly.
* Allowed better paths in the `v1/agent/token/` API. Instead of paths like: `v1/agent/token/acl_replication_token` the path can now be just `v1/agent/token/replication`. The old paths remain to be valid.
* Added a couple new API functions to set tokens via the new paths. Deprecated the old ones and pointed to the new names. The names are also generally better and don't imply that what you are setting is for ACLs but rather are setting ACL tokens. There is a minor semantic difference there especially for the replication token as again, its no longer used only for ACL token/policy replication. The new functions will detect 404s and fallback to using the older token paths when talking to pre-1.4.3 agents.
* Docs updated to reflect the API additions and to show using the new endpoints.
* Updated the ACL CLI set-agent-tokens command to use the non-deprecated APIs.
In order to be able to reload the TLS configuration, we need one way to generate the different configurations.
This PR introduces a `tlsutil.Configurator` which holds a `tlsutil.Config`. Afterwards it is responsible for rendering every `tls.Config`. In this particular PR I moved `IncomingHTTPSConfig`, `IncomingTLSConfig`, and `OutgoingTLSWrapper` into `tlsutil.Configurator`.
This PR is a pure refactoring - not a single feature added. And not a single test added. I only slightly modified existing tests as necessary.
Also in acl_endpoint_test.go:
* convert logical blocks in some token tests to subtests
* remove use of require.New
This removes a lot of noise in a later PR.
There was an errant early-return in PolicyDelete() that bypassed the
rest of the function. This was ok because the only caller of this
function ignores the results.
This removes the early-return making it structurally behave like
TokenDelete() and for both PolicyDelete and TokenDelete clarify the lone
callers to indicate that the return values are ignored.
We may wish to avoid the entire return value as well, but this patch
doesn't go that far.
`establishLeadership` invoked during leadership monitoring may use autopilot to do promotions etc. There was a race with doing that and having autopilot initialized and this fixes it.
Given a query like:
```
{
"Name": "tagged-connect-query",
"Service": {
"Service": "foo",
"Tags": ["tag"],
"Connect": true
}
}
```
And a Consul configuration like:
```
{
"services": [
"name": "foo",
"port": 8080,
"connect": { "sidecar_service": {} },
"tags": ["tag"]
]
}
```
If you executed the query it would always turn up with 0 results. This was because the sidecar service was being created without any tags. You could instead make your config look like:
```
{
"services": [
"name": "foo",
"port": 8080,
"connect": { "sidecar_service": {
"tags": ["tag"]
} },
"tags": ["tag"]
]
}
```
However that is a bit redundant for most cases. This PR ensures that the tags and service meta of the parent service get copied to the sidecar service. If there are any tags or service meta set in the sidecar service definition then this copying does not take place. After the changes, the query will now return the expected results.
A second change was made to prepared queries in this PR which is to allow filtering on ServiceMeta just like we allow for filtering on NodeMeta.
When tests fail, only the logs for the failing run are dumped to the
console which helps in diagnosis. This is easily added to other test
scenarios as they come up.
* Fix 2 remote ACL policy resolution issues
1 - Use the right method to fire async not found errors when the ACL.PolicyResolve RPC returns that error. This was previously accidentally firing a token result instead of a policy result which would have effectively done nothing (unless there happened to be a token with a secret id == the policy id being resolved.
2. When concurrent policy resolution is being done we single flight the requests. The bug before was that for the policy resolution that was going to piggy back on anothers RPC results it wasn’t waiting long enough for the results to come back due to looping with the wrong variable.
* Fix a handful of other edge case ACL scenarios
The main issue was that token specific issues (not able to access a particular policy or the token being deleted after initial fetching) were poisoning the policy cache.
A second issue was that for concurrent token resolutions, the first resolution to get started would go fetch all the policies. If before the policies were retrieved a second resolution request came in, the new request would register watchers for those policies but then never block waiting for them to complete. This resulted in using the default policy when it shouldn't have.
* Support rate limiting and concurrency limiting CSR requests on servers; handle CA rotations gracefully with jitter and backoff-on-rate-limit in client
* Add CSR rate limiting docs
* Fix config naming and add tests for new CA configs
* Store leaf cert indexes in raft and use for the ModifyIndex on the returned certs
This ensures that future certificate signings will have a strictly greater ModifyIndex than any previous certs signed.
## Background
When making a blocking query on a missing service (was never registered, or is not registered anymore) the query returns as soon as any service is updated.
On clusters with frequent updates (5~10 updates/s in our DCs) these queries virtually do not block, and clients with no protections againt this waste ressources on the agent and server side. Clients that do protect against this get updates later than they should because of the backoff time they implement between requests.
## Implementation
While reducing the number of unnecessary updates we still want :
* Clients to be notified as soon as when the last instance of a service disapears.
* Clients to be notified whenever there's there is an update for the service.
* Clients to be notified as soon as the first instance of the requested service is added.
To reduce the number of unnecessary updates we need to block when a request to a missing service is made. However in the following case :
1. Client `client1` makes a query for service `foo`, gets back a node and X-Consul-Index 42
2. `foo` is unregistered
3. `client1` makes a query for `foo` with `index=42` -> `foo` does not exist, the query blocks and `client1` is not notified of the change on `foo`
We could store the last raft index when each service was last alive to know wether we should block on the incoming query or not, but that list could grow indefinetly.
We instead store the last raft index when a service was unregistered and use it when a query targets a service that does not exist.
When a service `srv` is unregistered this "missing service index" is always greater than any X-Consul-Index held by the clients while `srv` was up, allowing us to immediatly notify them.
1. Client `client1` makes a query for service `foo`, gets back a node and `X-Consul-Index: 42`
2. `foo` is unregistered, we set the "missing service index" to 43
3. `client1` makes a blocking query for `foo` with `index=42` -> `foo` does not exist, we check against the "missing service index" and return immediatly with `X-Consul-Index: 43`
4. `client1` makes a blocking query for `foo` with `index=43` -> we block
5. Other changes happen in the cluster, but foo still doesn't exist and "missing service index" hasn't changed, the query is still blocked
6. `foo` is registered again on index 62 -> `foo` exists and its index is greater than 43, we unblock the query
Fixes#4897
Also apparently token deletion could segfault in secondary DCs when attempting to delete non-existant tokens. For that reason both checks are wrapped within the non-nil check.
* Avoid to have infinite recursion in DNS lookups when resolving CNAMEs
This will avoid killing Consul when a Service.Address is using CNAME
to a Consul CNAME that creates an infinite recursion.
This will fix https://github.com/hashicorp/consul/issues/4907
* Use maxRecursionLevel = 3 to allow several recursions
* bugfix: use ServiceTags to generate cahce key hash
* update unit test
* update
* remote print log
* Update .gitignore
* Completely deprecate ServiceTag field internally for clarity
* Add explicit test for CacheInfo cases
This PR both prevents a blank CA config from being written out to
a snapshot and allows Consul to gracefully recover from a snapshot
with an invalid CA config.
Fixes#4954.
Fix catalog service node filtering (ex /v1/catalog/service/srv?tag=tag1)
between agent version <=v1.2.3 and server >=v1.3.0.
New server version did not account for the old field when filtering
hence request made from old agent were not tag-filtered.
* Update the ACL API docs
* Add a CreateTime to the anon token
Also require acl:read permissions at least to perform rule translation. Don’t want someone DoSing the system with an open endpoint that actually does a bit of work.
* Fix one place where I was referring to id instead of AccessorID
* Add godocs for the API package additions.
* Minor updates: removed some extra commas and updated the acl intro paragraph
* minor tweaks
* Updated the language to be clearer
* Updated the language to be clearer for policy page
* I was also confused by that! Your updates are much clearer.
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Sounds much better.
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* Updated sidebar layout and deprecated warning
* Add leader token upgrade test and fix various ACL enablement bugs
* Update the leader ACL initialization tests.
* Add a StateStore ACL tests for ACLTokenSet and ACLTokenGetBy* functions
* Advertise the agents acl support status with the agent/self endpoint.
* Make batch token upsert CAS’able to prevent consistency issues with token auto-upgrade
* Finish up the ACL state store token tests
* Finish the ACL state store unit tests
Also rename some things to make them more consistent.
* Do as much ACL replication testing as I can.
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description
At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.
On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.
Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
A server running the new system must still support other clients using the legacy system.
A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.
So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
* Add -enable-local-script-checks options
These options allow for a finer control over when script checks are enabled by
giving the option to only allow them when they are declared from the local
file system.
* Add documentation for the new option
* Nitpick doc wording
* Support multiple tags for health and catalog api endpoints
Fixes#1781.
Adds a `ServiceTags` field to the ServiceSpecificRequest to support
multiple tags, updates the filter logic in the catalog store, and
propagates these change through to the health and catalog endpoints.
Note: Leaves `ServiceTag` in the struct, since it is being used as
part of the DNS lookup, which in turn uses the health check.
* Update the api package to support multiple tags
Includes additional tests.
* Update new tests to use the `require` library
* Update HealthConnect check after a bad merge
* [Performance On Large clusters] Checks do update services/nodes only when really modified to avoid too many updates on very large clusters
In a large cluster, when having a few thousands of nodes, the anti-entropy
mechanism performs lots of changes (several per seconds) while
there is no real change. This patch wants to improve this in order
to increase Consul scalability when using many blocking requests on
health for instance.
* [Performance for large clusters] Only updates index of service if service is really modified
* [Performance for large clusters] Only updates index of nodes if node is really modified
* Added comments / ensure IsSame() has clear semantics
* Avoid having modified boolean, return nil directly if stutures are Same
* Fixed unstable unit tests TestLeader_ChangeServerID
* Rewrite TestNode_IsSame() for better readability as suggested by @banks
* Rename ServiceNode.IsSame() into IsSameService() + added unit tests
* Do not duplicate TestStructs_ServiceNode_Conversions() and increase test coverage of IsSameService
* Clearer documentation in IsSameService
* Take into account ServiceProxy into ServiceNode.IsSameService()
* Fixed IsSameService() with all new structures
* Refactor Service Definition ProxyDestination.
This includes:
- Refactoring all internal structs used
- Updated tests for both deprecated and new input for:
- Agent Services endpoint response
- Agent Service endpoint response
- Agent Register endpoint
- Unmanaged deprecated field
- Unmanaged new fields
- Managed deprecated upstreams
- Managed new
- Catalog Register
- Unmanaged deprecated field
- Unmanaged new fields
- Managed deprecated upstreams
- Managed new
- Catalog Services endpoint response
- Catalog Node endpoint response
- Catalog Service endpoint response
- Updated API tests for all of the above too (both deprecated and new forms of register)
TODO:
- config package changes for on-disk service definitions
- proxy config endpoint
- built-in proxy support for new fields
* Agent proxy config endpoint updated with upstreams
* Config file changes for upstreams.
* Add upstream opaque config and update all tests to ensure it works everywhere.
* Built in proxy working with new Upstreams config
* Command fixes and deprecations
* Fix key translation, upstream type defaults and a spate of other subtele bugs found with ned to end test scripts...
TODO: tests still failing on one case that needs a fix. I think it's key translation for upstreams nested in Managed proxy struct.
* Fix translated keys in API registration.
≈
* Fixes from docs
- omit some empty undocumented fields in API
- Bring back ServiceProxyDestination in Catalog responses to not break backwards compat - this was removed assuming it was only used internally.
* Documentation updates for Upstreams in service definition
* Fixes for tests broken by many refactors.
* Enable travis on f-connect branch in this branch too.
* Add consistent Deprecation comments to ProxyDestination uses
* Update version number on deprecation notices, and correct upstream datacenter field with explanation in docs
* Fix CA pruning when CA config uses string durations.
The tl;dr here is:
- Configuring LeafCertTTL with a string like "72h" is how we do it by default and should be supported
- Most of our tests managed to escape this by defining them as time.Duration directly
- Out actual default value is a string
- Since this is stored in a map[string]interface{} config, when it is written to Raft it goes through a msgpack encode/decode cycle (even though it's written from server not over RPC).
- msgpack decode leaves the string as a `[]uint8`
- Some of our parsers required string and failed
- So after 1 hour, a default configured server would throw an error about pruning old CAs
- If a new CA was configured that set LeafCertTTL as a time.Duration, things might be OK after that, but if a new CA was just configured from config file, intialization would cause same issue but always fail still so would never prune the old CA.
- Mostly this is just a janky error that got passed tests due to many levels of complicated encoding/decoding.
tl;dr of the tl;dr: Yay for type safety. Map[string]interface{} combined with msgpack always goes wrong but we somehow get bitten every time in a new way :D
We already fixed this once! The main CA config had the same problem so @kyhavlov already wrote the mapstructure DecodeHook that fixes it. It wasn't used in several places it needed to be and one of those is notw in `structs` which caused a dependency cycle so I've moved them.
This adds a whole new test thta explicitly tests the case that broke here. It also adds tests that would have failed in other places before (Consul and Vaul provider parsing functions). I'm not sure if they would ever be affected as it is now as we've not seen things broken with them but it seems better to explicitly test that and support it to not be bitten a third time!
* Typo fix
* Fix bad Uint8 usage
* Implementation of Weights Data structures
Adding this datastructure will allow us to resolve the
issues #1088 and #4198
This new structure defaults to values:
```
{ Passing: 1, Warning: 0 }
```
Which means, use weight of 0 for a Service in Warning State
while use Weight 1 for a Healthy Service.
Thus it remains compatible with previous Consul versions.
* Implemented weights for DNS SRV Records
* DNS properly support agents with weight support while server does not (backwards compatibility)
* Use Warning value of Weights of 1 by default
When using DNS interface with only_passing = false, all nodes
with non-Critical healthcheck used to have a weight value of 1.
While having weight.Warning = 0 as default value, this is probably
a bad idea as it breaks ascending compatibility.
Thus, we put a default value of 1 to be consistent with existing behaviour.
* Added documentation for new weight field in service description
* Better documentation about weights as suggested by @banks
* Return weight = 1 for unknown Check states as suggested by @banks
* Fixed typo (of -> or) in error message as requested by @mkeeler
* Fixed unstable unit test TestRetryJoin
* Fixed unstable tests
* Fixed wrong Fatalf format in `testrpc/wait.go`
* Added notes regarding DNS SRV lookup limitations regarding number of instances
* Documentation fixes and clarification regarding SRV records with weights as requested by @banks
* Rephrase docs
* Display more information about check being not properly added when it fails
It follows an incident where we add lots of error messages:
[WARN] consul.fsm: EnsureRegistration failed: failed inserting check: Missing service registration
That seems related to Consul failing to restart on respective agents.
Having Node information as well as service information would help diagnose the issue.
* Renamed ensureCheckIfNodeMatches() as requested by @banks
* Allow to rename nodes with IDs, will fix#3974 and #4413
This change allow to rename any well behaving recent agent with an
ID to be renamed safely, ie: without taking the name of another one
with case insensitive comparison.
Deprecated behaviour warning
----------------------------
Due to asceding compatibility, it is still possible however to
"take" the name of another name by not providing any ID.
Note that when not providing any ID, it is possible to have 2 nodes
having similar names with case differences, ie: myNode and mynode
which might lead to DB corruption on Consul server side and
lead to server not properly restarting.
See #3983 and #4399 for Context about this change.
Disabling registration of nodes without IDs as specified in #4414
should probably be the way to go eventually.
* Removed the case-insensitive search when adding a node within the else
block since it breaks the test TestAgentAntiEntropy_Services
While the else case is probably legit, it will be fixed with #4414 in
a later release.
* Added again the test in the else to avoid duplicated names, but
enforce this test only for nodes having IDs.
Thus most tests without any ID will work, and allows us fixing
* Added more tests regarding request with/without IDs.
`TestStateStore_EnsureNode` now test registration and renaming with IDs
`TestStateStore_EnsureNodeDeprecated` tests registration without IDs
and tests removing an ID from a node as well as updated a node
without its ID (deprecated behaviour kept for backwards compatibility)
* Do not allow renaming in case of conflict, including when other node has no ID
* Fixed function GetNodeID that was not working due to wrong type when searching node from its ID
Thus, all tests about renaming were not working properly.
Added the full test cas that allowed me to detect it.
* Better error messages, more tests when nodeID is not a valid UUID in GetNodeID()
* Added separate TestStateStore_GetNodeID to test GetNodeID.
More complete test coverage for GetNodeID
* Added new unit test `TestStateStore_ensureNoNodeWithSimilarNameTxn`
Also fixed comments to be clearer after remarks from @banks
* Fixed error message in unit test to match test case
* Use uuid.ParseUUID to parse Node.ID as requested by @mkeeler
* Fixes TestAgent_IndexChurn
* Fixes TestPreparedQuery_Wrapper
* Increased sleep in agent_test for IndexChurn to 500ms
* Made the comment about joinWAN operation much less of a cliffhanger
* Revert "BUGFIX: Unit test relying on WaitForLeader() did not work due to wrong test (#4472)"
This reverts commit cec5d7239621e0732b3f70158addb1899442acb3.
* Revert "CA initialization while boostrapping and TestLeader_ChangeServerID fix. (#4493)"
This reverts commit 589b589b53e56af38de25db9b56967bdf1f2c069.
- Improve resilience of testrpc.WaitForLeader()
- Add additionall retry to CI
- Increase "go test" timeout to 8m
- Add wait for cluster leader to several tests in the agent package
- Add retry to some tests in the api and command packages
* Fix theoretical cache collision bug if/when we use more cache types with same result type
* Generalized fix for blocking query handling when state store methods return zero index
* Refactor test retry to only affect CI
* Undo make file merge
* Add hint to error message returned to end-user requests if Connect is not enabled when they try to request cert
* Explicit error for Roots endpoint if connect is disabled
* Fix tests that were asserting old behaviour
UUID auto-generation here causes trouble in a few cases. The biggest being older
nodes reregistering will fail when the UUIDs are different and the names match
This reverts commit 0f700340828f464449c2e0d5a82db0bc5456d385.
This reverts commit d1a8f9cb3f6f48dd9c8d0bc858031ff6ccff51d0.
This reverts commit cf69ec42a418ab6594a6654e9545e12160f30970.
Since DNS is case insensitive and DB as issues when similar names with different
cases are added, check for unicity based on case insensitivity.
Following another big incident we had in our cluster, we also validate
that adding/renaming a not does not conflicts with case insensitive
matches.
We had the following error once:
- one node called: mymachine.MYDC.mydomain was shut off
- another node (different ID) was added with name: mymachine.mydc.mydomain before
72 hours
When restarting the consul server of domain, the consul server restarted failed
to start since it detected an issue in RAFT database because
mymachine.MYDC.mydomain and mymachine.mydc.mydomain had the same names.
Checking at registration time with case insensitivity should definitly fix
those issues and avoid Consul DB corruption.
It will allow the following:
* when connectivity is limited (saturated linnks between DCs), only one
single request to refresh an ACL will be sent to ACL master DC instead
of statcking ACL refresh queries
* when extend-cache is used for ACL, do not wait for result, but refresh
the ACL asynchronously, so no delay is not impacting slave DC
* When extend-cache is not used, keep the existing blocking mechanism,
but only send a single refresh request.
This will fix https://github.com/hashicorp/consul/issues/3524
Intention de-duplication in previously merged PR actualy failed some tests that were not caught be me or CI. I ran the test files for state changes but they happened not to trigger this case so I made sure they did first and then fixed. That fixed some upstream intention endpoint tests that I'd not run as part of testing the previous fix.
Uses struct/interface embedding with the embedded structs/interfaces being empty for oss. Also methods on the server/client types are defaulted to do nothing for OSS
Test HTTP/DNS source IP without header/extra EDNS data.
Add WARN log for when prepared query with near=_ip is executed without specifying the source ip
Bugfix for https://github.com/hashicorp/consul/pull/3899
When a node level check is removed (example: maintenance),
some watchers on services might have to recompute their state.
If those nodes are performing blocking queries, they have to be notified.
While their state was updated when node-level state did change or was added
this was not the case when the check was removed. This fixes it.
Daniel Nephin