* Add model layer support for filtering intentions by service
* Add Route, Controller and template for services.show.intentions tab
We are still loading the intentions themselves in the parent Route for
the moment
* Load the intentions in in the parent route for the moment
* Temporarily add support for returning to history -1
Once we have an intention form underneath the service/intention tab this
will no longer be needed
* Add the new tab and enable blocking queries for it
* Add some further acceptance testing around intention listings
* Create GridCollection for nodes page with styling
* Update ListCollection styling
* Update TagList styling
* Create CompositeRow styling component
* Update ConsulServiceList component with styling
* Create service health-checks helper
* Add InstanceCount to the service model
* Add tag-svg to codebase
* Create and update tests for service-list page
* Upgrade @hashicorp/consul-api-double to 2.14.0
* ui: Add tab navigation to the browser history/URLs
This commit changes all our tabbed UI interfaces in the catalog to use
actual URL changes rather than only updating the content in the page
using CSS.
Originally we had decided not to add tab clicks into the browser
history for a variety of reasons. As the UI has progressed these tabs
are a fairly common pattern we are using and as the UI grows and
stabilizes around certain UX patterns we've decided to make these tabs
'URL changing'.
Pros:
- Deeplinking
- Potentially smaller Route files with a more concentrated scope of the
contents of a tab rather than the entire page.
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages.
- The majority of our partials are now fully fledged templates (Octane
🎉)
Cons:
- Tab clicks now go into your history meaning backwards and forwards
buttons take you through the tabs not just the pages. (Could be good and
bad from a UX perspective)
- Many more Route and Controller files (yet as mentioned above each of these
have a more reduced scope)
- Moving around the contents of these tabs, or changing the visual names
of them means updates to the URL structure, which then should
potentially entail redirects, therefore what things that seem like
straightforwards design reorganizations are now a little more impactful.
It was getting to the point that the Pros outweight the Cons
Apart from moving some files around we made a few more tiny tweaks to
get this all working:
- Our freetext-filter component now performs the initial search rather
than this happening in the Controller (remove of the search method in
the Controllers and the new didInsertElement hook in the component)
- All of the <TabNav>'s were changed to use its alternative href
approach.
- <TabPanel>s usage was mostly removed. This is th thing I dislike the
most. I think this needs removing, but I'd also like to remove the HTML
it creates. You'll see that every new page is wrappe din the HTML for
the old <TabPanel>, this is to continue to use the same HTML structure
and id's as before to avoid making further changes to any CSS that might
use this and being able to target things during testing. We could have
also removed these here, but it would have meant a much larger changeset
and can just as easily be done at a later date.
- We made a new `tabgroup` page-object component, which is almost
identical to the previous `radiogroup` one and injected that instead
where needed during testing.
* Make sure we pick up indexed routes when nspaces are enabled
* Move session invalidation to the child (session) route
* Revert back to not using didInsertElement for updating the searching
This adds a way for the searchable to remember the last search result
instead, which changes less and stick to the previous method of
searching.
* Modify templates with codemods angle brackets
* ui: Fix up problem with intention filter action attribute
Co-authored-by: Kenia <19161242+kaxcode@users.noreply.github.com>
For URL maintenance reasons we store the last visited DC in
localStorage incase you come back to a page (for example settings) that
doesn't have a dc in the URL.
A problem arises here if the last DC you tried to visit is unreachable.
The first fix here clears out the last visited DC from localStorage if
the API has errored out.
Secondly, our `href-mut` helper which mutates the current current and
replaces 'parts' in the URL rather than the whole thing functioned by
detecting the current route/URL you are on an 'mutating' that. A problem
arose here as even though you might be on the `/ui/dc-1/services` URL the
actual route is the 'error' route which does not have a URL that can be
changed properly.
The second fix here uses route.currentRoute.name over route.currentRouteName.
The latter is equal to error when an error occurs whereas the former gives you the name of the route before the error happened, which is actually what we want/the intent here.
ie. when `router.currentRouteName === 'error'` then
`router.currentRoute.name === Name Of Route Before It Errored` it seems
* Adds conditional in route to not make discovery-chain request if service kind is equal to `connect-proxy` or `mesh-gateway`
* Adds conditional in template to not show Routing tab if `chain` returns as null
* Creates a new acceptance test to test the Routing tab not being displayed for a service proxy
* Adds `tabs` to the services/show page object
* Adds an acceptance test for hiding Blocking Queries
* Creates a new scenario - If a user adds CONSUL_UI_DISABLE_REALTIME to localStorage, the Blocking Queries section is hidden.
* Updates page assertion to accept functions and booleans as properties
* ui: Fix "don't see" step to watch for the different pageObject error
ember-cli-page object seems to throw a an error with a different message
depending on how you call a function:
currentPage()[property]() // message = 'Element not found'
const prop = currentPage()[property];
prop() // message = 'Something about destructuring'
This changes the step/test/assertion to ensure we check for both types of errors
Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
* ui: Fix typo expanded > ariaExpanded
* ui: Add the things we need to test this
* ui: Add tests for testing the menu closes when clicked
* ui: Ensure the aria-menu closes on route change
When editing Nspaces, although you can assign policies to a nspace using
PolicyDefaults you cannot assign a Service Identity to a policy like you
can when adding a policy to a token.
This commit adds an extra attribute to our policy-form/policy-selector
component so you can disable this setting. At a later date we may change
this to have a conficgurable `<Slot />` instead.
Simple acceptance tests is included here
* ui: Acceptance test improvements to prepare for more NS tests
* ui: Namespace acceptance testing (#7005)
* Update api-double and consul-api-double for http.body
* Adds places where we missed passing the nspace through
* Hardcode nspace CRUD to use the default nspace for policies and roles
* Alter test helpers to allow us to control nspaces from the outside
* Amends to allow tests to account for namespace, move ns from queryParam
1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios
* Enable nspace testing by default
* Remove last few occurances of old style http assertions
We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.
This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.
This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.
* ui: Namespace CRUD acceptance tests (#7016)
* Upgrade consul-api-double
* Add all the things required for testing:
1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL
* Add acceptance test for nspace edit/delete/list and searching
* ui: Change action-group to use new popup-menu component in intentions
* ui: Slight amends to aria-menu to prevent scrolling
* ui: Begin to use aria-menu/popover-menu for other elements
* Use a simpler, hackier method to fix up zIndexing
* ui: Implement new confirmation dialogs in other list views (#7080)
This includes another amend to the popover-menu in order to allow
mutiple confirmations/subpanels in the same popover menu.
The functionality added here to allow this is likely to change in the
future.
Adds namespace support to the UI:
1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
Adds visibility for `Expose.Checks` config setting for proxies.
1. Adds an 'Exposed Path' tab to the proxy detail page to show the user information on exposed paths.
2. If the users has exposed their healthchecks we also add this information to the Service detail page for this proxy (only for http2 and gRPC checks)
## HTTPAdapter (#5637)
## Ember upgrade 2.18 > 3.12 (#6448)
### Proxies can no longer get away with not calling _super
This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.
### We aren't allowed to reset a service anymore
We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date
### Revert classes to use ES5 style to workaround babel transp. probs
Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.
Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.
These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.
Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions
### Skip test that seems to have changed due to a change in RSVP timing
This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further
### Remove enumerableContentDidChange
Initial testing looks like we don't need to call this function anymore,
the function no longer exists
### Rework Changeset.isSaving to take into account new ember APIs
Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead
### Change how we detect whether something requires listening
New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`
### Potentially temporary change of ci test scripts to ensure deps exist
All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).
The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).
The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).
For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.
This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.
Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.
### Make test-parallel consistent with the rest of the tooling scripts
As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.
This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn
### Re-wrangle catchable to fit with new ember 3.12 APIs
In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.
7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)
There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.
3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)
Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)
This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.
### Build bindata_assetfs.go with new UI changes
- yarn upgrade consul-api-double which includes `status/leader`
- add all the ember-data things required to call a new endpoint
- Pass the new leader variable through to the template
- use the new leader variable in the template to set a leader
- add acceptance testing to verify leaders are highlighted
- Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to
be called).
- Template whitespace commit (less indenting)
- adds a test to to assert no errors happen with an unelected leader
- Removes 'type' icons (basically the proxy icon, not the text itself)
- Add support for Mesh Gateways plus their addresses
This adds a 'Mesh Gateway' type label to service and service instance
pages, plus a new 'Addresses' tab if the service is a Mesh Gateway
showing a table of addresses for the service - plus tests
Previously we were creating a fake event and amending the name of the
fake event, this meant that other `event.target` properties weren't
being passed through (in this instance `checked`) this changes the
approach to not use fake events, and allows you to overwrite the name
that the form uses for `handleEvent`
1. Includes Datacenter variable for intperolation
2. Amends text on the Settings page to reflect new keyword
3. Adds further acceptance testing around the new dashboard buttons
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
* ui: Add forking based on service instance id existence
Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.
LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.
This adds template logic to show different text depending on this
information.
Additionally adds test around connect proxies (#5418)
1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.
Various smaller changes:
1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
1. Addition of external source icons for services marked as such.
2. New %with-tooltip css component (wip)
3. New 'no healthcheck' icon as external sources might not have
healthchecks, also minus icon on node cards in the service detail view
4. If a service doesn't have healthchecks, we use the [Services] tabs as the
default instead of the [Health Checks] tab in the Service detail page.
5. `css-var` helper. The idea here is that it will eventually be
replaced with pure css custom properties instead of having to use JS. It
would be nice to be able to build the css variables into the JS at build
time (you'd probably still want to specify in config which variables you
wanted available in JS), but that's possible future work.
Lastly there is probably a tiny bit more testing edits here than usual,
I noticed that there was an area where the dynamic mocking wasn't
happening, it was just using the mocks from consul-api-double, the mocks
I was 'dynamically' setting happened to be the same as the ones in
consul-api-double. I've fixed this here also but it wasn't effecting
anything until actually made certain values dynamic.
* Move notification texts to a slightly different layer (#4572)
* Further Simplify/refactor the actions/notification layer (#4573)
1. Move the 'with-feedback' actions to a 'with-blocking-action' mixin
which better describes what it does
2. Additional set of unit tests almost over the entire layer to prove
things work/add confidence for further changes
The multiple 'with-action' mixins used for every 'index/edit' combo are
now reduced down to only contain the functionality related to their
specific routes, i.e. where to redirect.
The actual functionality to block and carry out the action and then
notify are 'almost' split out so that their respective classes/objects do
one thing and one thing 'well'.
Mixins are chosen for the moment as the decoration approach used by
mixins feels better than multiple levels of inheritence, but I would
like to take this fuether in the future to a 'compositional' based
approach.
There is still possible further work to be done here, but I'm a lot
happier now this is reduced down into separate parts.
1. There are various things tests that can just have intentions added
into them, like filters and such like, add intentions to these
2. Start thinking about being able to negate steps easily, which will
lead on to a cleanup of the steps
This enables people to enter things using the mouse to paste for
example, plus possible other things.
As an aside it also answers my query regarding `fillIn` for testing,
nothing needs to be actually _typed_ anymore! Doh
John Cowen