Commit Graph

117 Commits

Author SHA1 Message Date
John Cowen 40e632a955
ui: Enable recovery from an unreachable datacenter (500 error) (#7404)
For URL maintenance reasons we store the last visited DC in
localStorage incase you come back to a page (for example settings) that
doesn't have a dc in the URL.

A problem arises here if the last DC you tried to visit is unreachable.

The first fix here clears out the last visited DC from localStorage if
the API has errored out.

Secondly, our `href-mut` helper which mutates the current current and
replaces 'parts' in the URL rather than the whole thing functioned by
detecting the current route/URL you are on an 'mutating' that. A problem
arose here as even though you might be on the `/ui/dc-1/services` URL the
actual route is the 'error' route which does not have a URL that can be
changed properly.

The second fix here uses route.currentRoute.name over route.currentRouteName.

The latter is equal to error when an error occurs whereas the former gives you the name of the route before the error happened, which is actually what we want/the intent here.

ie. when `router.currentRouteName === 'error'` then
`router.currentRoute.name === Name Of Route Before It Errored` it seems
2020-03-09 09:10:47 +00:00
John Cowen c5cad67f84
ui: Gracefully cope with 500 errors from the disco-chain API endpoint (#7291)
When connect is disabled the discovery-chain endpoint returns a 500
error status, which we previoulsy did not gracefully cope with.

This commit gracefully copes with any errors from the disco-chain
endpoint by supressing the error and hiding the Routing tab from the
Service detail page.

Acceptance test included
2020-02-14 14:46:16 +00:00
John Cowen 5b7a48e273
ui: oss don't ever POST/PUT Namespaces when writing data (#7238)
* ui: Ensure we use nonEmptySet everywhere where we add Namespace

We missed a coupld of places where we use the noEmptySet function, which
will only perform the set if the specified property is non-empty.

Currently we aren't certain there is a place in OSS where a Namespace
can make its way down via the API and endup being PUT/POSTed back out
again when saved. If this did ever happen we would assume it would be
the default namespace, but we add an extra check here to ensure we never
PUT/POST the Namespace property if Namespaces are disabled.

* ui: Add step/assertion for assert if a property is NOT set in the body

* ui: Improve updated/create acc testing for policy/token/roles:

Including making sure a Namespace property is never sent through if you
are running without namespace support
2020-02-07 15:50:50 +00:00
John Cowen 4be0f6c061
ui: Run 2 separate test runs oss and ent (#7214)
* ui: Make API integration tests aware of CONSUL_NSPACES_ENABLED

* ui: Allow passing CONSUL_NSPACES_ENABLED in via the cli in ember

* ui: Add more makefile targets/package scripts to switch NSPACEs on/off

* ui: Ensure all acceptance tests continue to pass with NSPACEs on/off

This required a little tweaking of the dictionary, at some point
page-navigation and some of these little tweaks will no longer be
required

* ui: Try running CI frontend tests in two parellel runs oss/ent

* ui: Use correct make target, use different names for the reports
2020-02-07 11:02:53 +00:00
John Cowen 1d26be2415
ui: Ensure KV flags are passed through to Consul on update (#7216)
* ui: always pass KV flags through on update

* ui: Integration test to prove the flags queryParams gets passed through

* ui: Add Flags to the KV updating acceptance tests
2020-02-05 09:37:45 +00:00
Kenia 1eec7d561d
ui: Add ability to search nodes listing page with IP Address (#7204)
* Update search field placeholder to display `Search`

* Add an acceptance test to search node listings with node name and IP Address

* Update and add unit tests for filter/search node listing with IP Address
2020-02-04 10:45:25 -05:00
Kenia ea5d2ef8b6
ui: Hides the Routing tab for a service proxy (#7195)
* Adds conditional in route to not make discovery-chain request if service kind is equal to `connect-proxy` or `mesh-gateway`

* Adds conditional in template to not show Routing tab if `chain` returns as null

* Creates a new acceptance test to test the Routing tab not being displayed for a service proxy

* Adds `tabs` to the services/show page object
2020-02-03 10:09:15 -05:00
Kenia c4f4f4e3c6
ui: Adds an acceptance test for hiding Blocking Queries (#7162)
* Adds an acceptance test for hiding Blocking Queries

* Creates a new scenario - If a user adds CONSUL_UI_DISABLE_REALTIME to localStorage, the Blocking Queries section is hidden.

* Updates page assertion to accept functions and booleans as properties

* ui: Fix "don't see" step to watch for the different pageObject error

ember-cli-page object seems to throw a an error with a different message
depending on how you call a function:

currentPage()[property]() // message = 'Element not found'

const prop = currentPage()[property];
prop() // message = 'Something about destructuring'

This changes the step/test/assertion to ensure we check for both types of errors

Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
2020-01-31 10:12:22 -05:00
John Cowen ce059a909b
ui: Fix sticky nspace menu (#7164)
* ui: Fix typo expanded > ariaExpanded

* ui: Add the things we need to test this

* ui: Add tests for testing the menu closes when clicked

* ui: Ensure the aria-menu closes on route change
2020-01-31 14:11:46 +00:00
John Cowen c5f184f61d
ui: Add live updates/blocking queries to the Intention listing page (#7161)
* ui: Enable blocking queries/live updates for intentions

* ui: Add acceptance tests for intention blocking queries

* ui: Add copy to explain that intentions are also now 'real time'
2020-01-29 16:22:31 +00:00
Kenia f6a7164d10
ui: Implements the ember-page-title addon to the UI (#7118)
* Installs ember-page-title 5.x

* Adds a page title to all template files that need one

* Adds an assertion step to test the page titles
2020-01-28 09:25:52 -05:00
John Cowen 0c12a0fef1
ui: Remove the Policy/Service Identity selector from nspaces (#7124)
When editing Nspaces, although you can assign policies to a nspace using
PolicyDefaults you cannot assign a Service Identity to a policy like you
can when adding a policy to a token.

This commit adds an extra attribute to our policy-form/policy-selector
component so you can disable this setting. At a later date we may change
this to have a conficgurable `<Slot />` instead.

Simple acceptance tests is included here
2020-01-28 09:39:09 +00:00
John Cowen fde7ca365a
ui: Acceptance test improvements to prepare for more NS tests (#6980)
* ui: Acceptance test improvements to prepare for more NS tests

* ui: Namespace acceptance testing (#7005)

* Update api-double and consul-api-double for http.body

* Adds places where we missed passing the nspace through

* Hardcode nspace CRUD to use the default nspace for policies and roles

* Alter test helpers to allow us to control nspaces from the outside

* Amends to allow tests to account for namespace, move ns from queryParam

1. We decided to move how we pass the namespace value through to the
backend when performing write actions (create, update). Previoulsy we
were using the queryParam although using the post body is the preferred
method to send the Namespace details through to the backend.
2. Other various amends to take into account testing across multiple
namespaced scenarios

* Enable nspace testing by default

* Remove last few occurances of old style http assertions

We had informally 'deprecated' our old style of http assertions that
relied on the order of http calls (even though that order was not
important for the assertion). Following on from our namespace work we
removed the majority of the old occrances of these old style assertions.

This commit removes the remaining few, and also then cleans up the
assertions/http.js file to only include the ones we are using.

This reduces our available step count further and prevents any confusion
over the usage of the old types and the new types.

* ui: Namespace CRUD acceptance tests (#7016)

* Upgrade consul-api-double

* Add all the things required for testing:

1. edit and index page objects
2. enable CONSUL_NSPACE_COUNT cookie setting
3. enable mutating HTTP response bodies based on URL

* Add acceptance test for nspace edit/delete/list and searching
2020-01-24 12:26:28 +00:00
John Cowen aa058a7162
ui: Make sure that the namespace is passed when changing a token via [Use] (#6973)
* Pass the namespace parameter through to the repo when using a token
* Refresh the namespace menu when somebody [Use]s a token
2019-12-20 14:57:10 +00:00
John Cowen e545c82e1e ui: Discovery Chain (#6746)
* Add data layer for discovery chain (model/adapter/serializer/repo)

* Add routing plus template for routing tab

* Add extra deps - consul-api-double upgrade plus ngraph for graphing

* Add discovery-chain and related components and helpers:

1. discovery-chain to orchestrate/view controller
2. route-card, splitter-card, resolver card to represent the 3 different
node types.
3. route-match helper for easy formatting of route rules
4. dom-position to figure out where things are in order to draw lines
5. svg-curve, simple wrapper around svg's <path d=""> attribute format.
6. data-structs service. This isn't super required but we are using
other data-structures provided by other third party npm modules in other
yet to be merged PRs. All of these types of things will live here for
easy access/injection/changability
7. Some additions to our css-var 'polyfill' for a couple of extra needed
rules

* Related CSS for discovery chain

1. We add a %card base component here, eventually this will go into our
base folder and %stats-card will also use it for a base component.
2. New icon for failovers

* ui: Discovery Chain Continued (#6939)

1. Add in the things we use for the animations
2 Use IntersectionObserver so we know when the tab is visible,
otherwise the dom-position helper won't work as the dom elements don't
have any display.
3. Add some base work for animations and use them a little
4. Try to detect if a resolver is a redirect. Right now this works for
datacenters and namespaces, but it can't work for services and subsets -
we are awaiting backend support for doing this properly.
5. Add a fake 'this service has no routes' route that says 'Default'
6. redirect icon
7. Add CSS.escape polyfill for Edge
2019-12-18 12:26:47 +00:00
John Cowen 31f36ce096 ui: Namespace Support (#6639)
Adds namespace support to the UI:

1. Namespace CRUD/management
2. Show Namespace in relevant areas (intentions, upstreams)
3. Main navigation bar improvements
4. Logic/integration to interact with a new `internal/acl/authorize` endpoint
2019-12-18 12:26:47 +00:00
John Cowen f52e1f607d ui: Expose checks (#6575)
Adds visibility for `Expose.Checks` config setting for proxies.

1. Adds an 'Exposed Path' tab to the proxy detail page to show the user information on exposed paths.
2. If the users has exposed their healthchecks we also add this information to the Service detail page for this proxy (only for http2 and gRPC checks)
2019-12-18 12:26:43 +00:00
John Cowen 338812f5c2
ui: UI Release Merge (ui-staging merge) (#6527)
## HTTPAdapter (#5637)

## Ember upgrade 2.18 > 3.12 (#6448)

### Proxies can no longer get away with not calling _super

This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.

### We aren't allowed to reset a service anymore

We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date

### Revert classes to use ES5 style to workaround babel transp. probs

Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.

Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.

These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.

Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions

### Skip test that seems to have changed due to a change in RSVP timing

This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further

### Remove enumerableContentDidChange

Initial testing looks like we don't need to call this function anymore,
the function no longer exists

### Rework Changeset.isSaving to take into account new ember APIs

Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead

### Change how we detect whether something requires listening

New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`

### Potentially temporary change of ci test scripts to ensure deps exist

All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).

The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).

The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).

For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.

This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.

Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.

### Make test-parallel consistent with the rest of the tooling scripts

As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.

This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn

### Re-wrangle catchable to fit with new ember 3.12 APIs

In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.

7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)

There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.

3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)

Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)

This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.

### Build bindata_assetfs.go with new UI changes
2019-09-30 14:47:49 +01:00
John Cowen aac0406cb3
ui: Fix metaData test as result of new consul-api-double (#6436) 2019-09-04 10:13:43 +01:00
John Cowen 5cf063fc8a ui: Leader icon for node listing view (#6265)
- yarn upgrade consul-api-double which includes `status/leader`
- add all the ember-data things required to call a new endpoint
- Pass the new leader variable through to the template
- use the new leader variable in the template to set a leader
- add acceptance testing to verify leaders are highlighted
- Change testing navigation/api requests to status/leader (on the node listing page, status/leader is now the last get request to
be called).
- Template whitespace commit (less indenting)
- adds a test to to assert no errors happen with an unelected leader
2019-09-04 08:35:16 +00:00
John Cowen 429e27aaee ui: Enable blocking queries by default (#6194)
-Enable blocking queries by default
-Change assertion to check for the last PUT request, not just any request for session destruction from a node page.

Since we've now turned on blocking queries by default this means that a
second GET request is made after the PUT request that we are asserting
for but before the assertion itself, this meant the assertion failed. We
double checked this by turning off blocking queries for this test using

```
And settings from yaml
---
consul:client:
  blocking: 0
---
```

which made the test pass again.

As moving forwards blocking queries will be on by default, we didn't
want to disable blocking queries for this test, so we now assert the
last PUT request specifically. This means we continue to assert that the
session has been destroyed but means we don't get into problems of
ordering of requests here
2019-09-04 08:35:14 +00:00
John Cowen ff3c2582e2 ui: [Bugfix] - Sticky KV Sessions (#6166)
Initialize session value to `null` to prevent stickiness from a session the previous KV
2019-09-04 08:35:13 +00:00
John Cowen 5749b642f1 ui: Show the correct message when a session has been removed from a KV (#6167) 2019-09-04 08:35:11 +00:00
John Cowen e1a8a28cd2 ui: Include yadda/gherkin dictionaries we use for acc testing (#5956)
Currently these gherkin dictionaries are contained in
`ember-cli-api-double`, which isn't the correct place for them.
They belong with the steps themselves.
This is also less complicated now we can require/import javascript
using a standard approach

Also runs an update of `ember-cli-api-double` which will be the last
installation of version 1 of this module.
2019-09-04 08:35:01 +00:00
John Cowen d3930d55aa
ui: Adds readonly meta data to the serviceInstance and node detail pages (#6196) 2019-08-02 13:53:52 +02:00
John Cowen b143a3bb66
ui: Gateway Addresses (#6075)
- Removes 'type' icons (basically the proxy icon, not the text itself)

- Add support for Mesh Gateways plus their addresses
This adds a 'Mesh Gateway' type label to service and service instance
pages, plus a new 'Addresses' tab if the service is a Mesh Gateway
showing a table of addresses for the service - plus tests
2019-07-05 09:07:25 +01:00
Joel Kuzmarski 15d7340a75 Fix text and add feature test for copy button (#5958)
`Copied IP Address!` > `Copied output!`

Adds feature test for copy button
2019-06-27 10:01:30 +01:00
John Cowen 14c6152361
ui: Normal proxies link to services, sidecars to instances (#5944)
* ui: Normal proxies line to services, sidecars to instances

Following on from https://github.com/hashicorp/consul/pull/5933 we
noticed that 'normal' proxies should link to the service, rather than
the service instance. Additionally proxy 'searching' within the
repository should take into account the name of the node that the
originating service is on (sidecar proxies are generally co-located)

Added an additional test here to prove that a sidecar-proxy with the
same service id but on a different node does not show the sidecar proxy
link.
2019-06-20 09:37:17 +01:00
John Cowen 65cf56ad12
ui: Ensure Service Instance pages account for nodes (#5933)
Include node name in the URL for service instances
Integrate the node name slug into tests for service instance pages
2019-06-11 10:18:50 +01:00
John Cowen 92bff1bbb3
ui: Adds ability to search by policy, role or service ident names (#5811) 2019-06-05 09:25:32 +01:00
John Cowen e48167d931
UI: Test readonly ServiceIdentity rules (#5865) 2019-06-04 17:55:10 +01:00
John Cowen 334e16a6cf
ui: Ensures nested policy forms are reset properly (#5838)
1. All {{ivy-codemirror}} components need 'refreshing' when they become
visible via our own `didAppear` method on the `{{code-editor}}`
component

(also see:)
- https://github.com/hashicorp/consul/pull/4190#discussion_r193270223
- 73db111db8 (r225264296)

2. On initial investigation, it looks like the component we are using
for the code editor doesn't distinguish between setting its `value`
programatically and a `keyup` event, i.e. an interaction from the user.
We currently pretend that whenever its `value` changes, it is a `keyup`
event. This means that when we reset the `value` to `""`
programmatically for form resetting purposes, a 'pretend keyup' event
would also be fired, which would in turn kick off the validation, which
would fail and show an error message for empty values in other fields of
the form - something that is perfectly valid if you haven't typed
anything yet. We solved this by checking for `isPristine` on fields that
are allowed to be empty before you have typed anything.
2019-06-04 15:57:35 +01:00
John Cowen 52b71aaf96
ui: ACL Policies. Catch all server errors (#5836)
Always show any server errors under Rules, not just invalid HCL
2019-06-04 15:53:10 +01:00
John Cowen cd382b4180
ui: Previously we were passing through 'fake' events, revert to real.. (#5810)
Previously we were creating a fake event and amending the name of the
fake event, this meant that other `event.target` properties weren't
being passed through (in this instance `checked`) this changes the
approach to not use fake events, and allows you to overwrite the name
that the form uses for `handleEvent`
2019-05-08 17:12:16 +01:00
John Cowen 54548d5ffd
ui: Make the Rules readonly when creating ServiceIdentities (#5784)
Skipped test added for nagging for the moment
2019-05-07 14:09:23 +01:00
John Cowen dc5d403c28 ui: Adds {{Datacenter}} keyword for URL template interpolation (#5768)
1. Includes Datacenter variable for intperolation
2. Amends text on the Settings page to reflect new keyword
3. Adds further acceptance testing around the new dashboard buttons
2019-05-02 18:29:43 +00:00
John Cowen 81f209d71e UI: ACL Roles (#5635)
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.

Also includes refinements/improvements for easier testing of deeply nested components.

1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles

Also see: 

* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
2019-05-01 18:22:37 +00:00
John Cowen 08c5b376e7 ui: Search improvements (#5540)
* ui: Replaces Service listing filterbar with a phrase-editor search (#5507)

1. New phrase-editor restricting search to whole phrases (acts on
enter key). Allows removal of previously entered phrases
2. Searching now allows arrays of terms, multiple terms work via AND
2019-05-01 18:22:36 +00:00
John Cowen d18ef6fa02 ui: Closes the proxy blocking query for the service instance on dereg (#5667)
If a service instance show page is being viewed and the service instance
is deregistered, this closes the blocking query for the proxy as well as
the instance (the instances query will be clsed on the error)

Also adds skipped tests to nag in future
2019-05-01 18:22:34 +00:00
John Cowen 62ba4c9722 ui: Fixes RTT display, by ensuring use of ember proxies in tomography (#5666)
Previously the tomography wasn't using ember `get` so proxy updates
(specifically here whilst receiving a blocking update) wasn't working.

This adds `get` here until we update to newer `get`less ember and also
refactors slightly removing `n` and using `distance.length` instead

Skipped tests are adding here to nag us to come back here at some point.
2019-05-01 18:22:33 +00:00
John Cowen 006b6000a8 UI: Add support for blocking queries on the service instance detail page (#5487)
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.

To enable this:

1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.

Also:

Add support for blocking queries on the service instance detail page

1. Previous we could return  undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`

Adds support for blocking queries on the node detail page (#5489)

1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
2019-05-01 18:22:23 +00:00
John Cowen 1625a09372 ui: Adds blocking query support to the service detail page (#5479)
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.

To enable this:

1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
2019-05-01 18:22:22 +00:00
John Cowen 45a2fa5a01 UI: Add blocking cursor validation and more straightforward throttle (#5470)
More recommendations for blocking queries clients was added here:

https://github.com/hashicorp/consul/pull/5358

This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)

The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
2019-05-01 18:22:21 +00:00
John Cowen 75d8abd562 UI: Add forking based on service instance id existence (#5392)
* ui: Add forking based on service instance id existence

Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.

LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.

This adds template logic to show different text depending on this
information.

Additionally adds test around connect proxies (#5418)

1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
2019-05-01 18:22:15 +00:00
John Cowen e0326c3b0a UI: Service Instances (#5326)
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.

Various smaller changes:

1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
2019-05-01 18:22:10 +00:00
John Cowen eabb308ac2 UI: Add ember steps:list command for listing available steps (#5255)
* ui: Add ember steps:list command for listing available steps

1. Adds `command` addon to house the new command
2. Start to organize out the steps themselves, bring a bit more order to
things ready to dedupe and cleanup
2019-05-01 18:22:08 +00:00
John Cowen da36c2a0f9 UI: Add EventSource ready for implementing blocking queries (#5070)
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
2019-05-01 18:22:06 +00:00
John Cowen 7d76fea123
ui: Removes delete button form pages that show your current token (#5241)
Tokens can no longer delete themselves see:

https://github.com/hashicorp/consul/pull/5210

...so we remove the button to allow you to do that from the UI
2019-01-23 13:51:36 +00:00
John Cowen 6ec6530e03
UI: [BUGFIX] Decode/encode urls (#5206)
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.

Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.

It's related to the difference between `dynamic` routes and `wildcard` routes.

Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service

Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.

Where I mention 'conditionally' below, this is detection is what is used for the decision.

We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.

As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..

We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.

Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)

All in all this should make the entire ember app url encode/decode safe.
2019-01-23 13:46:59 +00:00
John Cowen 77ad621c04
ui: If a service has no external-source, don't show the icon (#4996) 2018-11-26 17:34:00 +00:00