* Include secret type when building resources from config snapshot
* First pass at generating envoy secrets from api-gateway snapshot
* Update comments for xDS update order
* Add secret type + corresponding golden files to existing tests
* Initialize test helpers for testing api-gateway resource generation
* Generate golden files for new api-gateway xDS resource test
* Support ADS for TLS certificates on api-gateway
* Configure TLS on api-gateway listeners
* Inline TLS cert code
* update tests
* Add SNI support so we can have multiple certificates
* Remove commented out section from helper
* regen deep-copy
* Add tcp tls test
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
* integ-test: fix flaky test - case-cfg-splitter-peering-ingress-gateways
* add retry peering to all peering cases
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
This is instead of the current behavior where we feed the config entries in using the config_entries.bootstrap configuration which oddly races against other setup code in some circumstances.
I converted ALL tests to explicitly create config entries.
more readable in CI.
```
Running primary verification step for case-ingress-gateway-multiple-services...
�[34;1mverify.bats
�[0m�[1G ingress proxy admin is up on :20000�[K�[75G 1/12�[2G�[1G ✓ ingress proxy admin is up on :20000�[K
�[0m�[1G s1 proxy admin is up on :19000�[K�[75G 2/12�[2G�[1G ✓ s1 proxy admin is up on :19000�[K
�[0m�[1G s2 proxy admin is up on :19001�[K�[75G 3/12�[2G�[1G ✓ s2 proxy admin is up on :19001�[K
�[0m�[1G s1 proxy listener should be up and have right cert�[K�[75G 4/12�[2G�[1G ✓ s1 proxy listener should be up and have right cert�[K
�[0m�[1G s2 proxy listener should be up and have right cert�[K�[75G 5/12�[2G�[1G ✓ s2 proxy listener should be up and have right cert�[K
�[0m�[1G ingress-gateway should have healthy endpoints for s1�[K�[75G 6/12�[2G�[31;1m�[1G ✗ ingress-gateway should have healthy endpoints for s1�[K
�[0m�[31;22m (from function `assert_upstream_has_endpoints_in_status' in file /workdir/primary/bats/helpers.bash, line 385,
```
versus
```
Running primary verification step for case-ingress-gateway-multiple-services...
1..12
ok 1 ingress proxy admin is up on :20000
ok 2 s1 proxy admin is up on :19000
ok 3 s2 proxy admin is up on :19001
ok 4 s1 proxy listener should be up and have right cert
ok 5 s2 proxy listener should be up and have right cert
not ok 6 ingress-gateway should have healthy endpoints for s1
not ok 7 s1 proxy should have been configured with max_connections in services
ok 8 ingress-gateway should have healthy endpoints for s2
```
Locally, always run integration tests using amd64, even if running
on an arm mac. This ensures the architecture locally always matches
the CI/CD environment.
In addition:
* Use consul:local for envoy integration and upgrade tests. Previously,
consul:local was used for upgrade tests and consul-dev for integration
tests. I didn't see a reason to use separate images as it's more
confusing.
* By default, disable the requirement that aws credentials are set.
These are only needed for the lambda tests and make it so you
can't run any tests locally, even if you're not running the
lambda tests. Now they'll only run if the LAMBDA_TESTS_ENABLED
env var is set.
* Split out the building of the Docker image for integration
tests into its own target from `dev-docker`. This allows us to always
use an amd64 image without messing up the `dev-docker` target.
* Add support for passing GO_TEST_FLAGs to `test-envoy-integ` target.
* Add a wait_for_leader function because tests were failing locally
without it.
Require use of mesh gateways in order for service mesh data plane
traffic to flow between peers.
This also adds plumbing for envoy integration tests involving peers, and
one starter peering test.
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.
Union of all commit messages follows to give an overarching summary:
xds: exclusively support incremental xDS when using xDS v3
Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support
Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit
xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings
In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.
This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.
xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
Note that this does NOT upgrade to xDS v3. That will come in a future PR.
Additionally:
- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.
Fixes#8425
This PR updates the tags that we generate for Envoy stats.
Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
This has the biggest impact on enterprise test cases that use namespaced
registrations, which prior to this change sometimes failed the initial
registration because the namespace was not yet created.
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.
Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
The key thing here is to use `curl --no-keepalive` so that envoy
pre-1.15 tests will reliably use the latest listener every time.
Extra:
- Switched away from editing line-item intentions the legacy way.
- Removed some teardown scripts, as we don't share anything between cases anyway
- Removed unnecessary use of `run` in some places.
There is a delay between an intentions change being made, and it being
reflected in the Envoy runtime configuration. Now that the enforcement
happens inside of Envoy instead of over in the agent, our tests need to
explicitly wait until the xDS reconfiguration is complete before
attempting to assert intentions worked.
Also remove a few double retry loops.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.
If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.
Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
* test/integration: only run against 1 envoy version
These tests are slow enough that it seems unlikely that anyone is
running multiple versions locally. If someone wants to, a for loop
outside of run_test.sh should do the right thing.
Remove unused vars.
* Remove logic to iterate over test cases, run a single case
* Add a golang runner for integration tests
* Use build tags for envoy integration tests
And add junit-xml report
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
* Implements a simple, tcp ingress gateway workflow
This adds a new type of gateway for allowing Ingress traffic into Connect from external services.
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:
There are several distinct chunks of code that are affected:
* new flags and config options for the server
* retry join WAN is slightly different
* retry join code is shared to discover primary mesh gateways from secondary datacenters
* because retry join logic runs in the *agent* and the results of that
operation for primary mesh gateways are needed in the *server* there are
some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
at multiple layers of abstraction just to pass the data down to the right
layer.
* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers
* the function signature for RPC dialing picked up a new required field (the
node name of the destination)
* several new RPCs for manipulating a FederationState object:
`FederationState:{Apply,Get,List,ListMeshGateways}`
* 3 read-only internal APIs for debugging use to invoke those RPCs from curl
* raft and fsm changes to persist these FederationStates
* replication for FederationStates as they are canonically stored in the
Primary and replicated to the Secondaries.
* a special derivative of anti-entropy that runs in secondaries to snapshot
their local mesh gateway `CheckServiceNodes` and sync them into their upstream
FederationState in the primary (this works in conjunction with the
replication to distribute addresses for all mesh gateways in all DCs to all
other DCs)
* a "gateway locator" convenience object to make use of this data to choose
the addresses of gateways to use for any given RPC or gossip operation to a
remote DC. This gets data from the "retry join" logic in the agent and also
directly calls into the FSM.
* RPC (`:8300`) on the server sniffs the first byte of a new connection to
determine if it's actually doing native TLS. If so it checks the ALPN header
for protocol determination (just like how the existing system uses the
type-byte marker).
* 2 new kinds of protocols are exclusively decoded via this native TLS
mechanism: one for ferrying "packet" operations (udp-like) from the gossip
layer and one for "stream" operations (tcp-like). The packet operations
re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
overhead.
* the server instances specially wrap the `memberlist.NetTransport` when running
with gateway federation enabled (in a `wanfed.Transport`). The general gist is
that if it tries to dial a node in the SAME datacenter (deduced by looking
at the suffix of the node name) there is no change. If dialing a DIFFERENT
datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
gateways to eventually end up in a server's :8300 port.
* a new flag when launching a mesh gateway via `consul connect envoy` to
indicate that the servers are to be exposed. This sets a special service
meta when registering the gateway into the catalog.
* `proxycfg/xds` notice this metadata blob to activate additional watches for
the FederationState objects as well as the location of all of the consul
servers in that datacenter.
* `xds:` if the extra metadata is in place additional clusters are defined in a
DC to bulk sink all traffic to another DC's gateways. For the current
datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
balances all servers as well as one mini-cluster per node
(`<node>.server.<dc>.consul`)
* the `consul tls cert create` command got a new flag (`-node`) to help create
an additional SAN in certs that can be used with this flavor of federation.
