When the protocol is http-like, and an intention has a peered source
then the normal RBAC mTLS SAN field check is replaces with a joint combo
of:
mTLS SAN field must be the service's local mesh gateway leaf cert
AND
the first XFCC header (from the MGW) must have a URI field that matches the original intention source
Also:
- Update the regex program limit to be much higher than the teeny
defaults, since the RBAC regex constructions are more complicated now.
- Fix a few stray panics in xds generation.
Adds the merge-central-config query param option to the /catalog/node-services/:node-name API,
to get a service definition in the response that is merged with central defaults (proxy-defaults/service-defaults).
Updated the consul connect envoy command to use this option when
retrieving the proxy service details so as to render the bootstrap configuration correctly.
Changes the sourcing of the envoy bootstrap configuration
to not use agent APIs and instead use the catalog(server) API.
This is done by passing a node-name flag to the command,
(which can only be used with proxy-id).
Also fixes a bug where the golden envoy bootstrap config files
used for tests did not use the expected destination service name
in certain places for connect proxy kind.
* update gateway-services table with endpoints
* fix failing test
* remove unneeded config in test
* rename "endpoint" to "destination"
* more endpoint renaming to destination in tests
* update isDestination based on service-defaults config entry creation
* use a 3 state kind to be able to set the kind to unknown (when neither a service or a destination exist)
* set unknown state to empty to avoid modifying alot of tests
* fix logic to set the kind correctly on CRUD
* fix failing tests
* add missing tests and fix service delete
* fix failing test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* fix a bug with kind and add relevant test
* fix compile error
* fix failing tests
* add kind to clone
* fix failing tests
* fix failing tests in catalog endpoint
* fix service dump test
* Apply suggestions from code review
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
* remove duplicate tests
* rename consts and fix kind when no destination is defined in the service-defaults.
* rename Kind to ServiceKind and change switch to use .(type)
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Introduces two new public gRPC endpoints (`Login` and `Logout`) and
includes refactoring of the equivalent net/rpc endpoints to enable the
majority of logic to be reused (i.e. by extracting the `Binder` and
`TokenWriter` types).
This contains the OSS portions of the following enterprise commits:
- 75fcdbfcfa6af21d7128cb2544829ead0b1df603
- bce14b714151af74a7f0110843d640204082630a
- cc508b70fbf58eda144d9af3d71bd0f483985893
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* do not reset timer on errors, rename OS specific files
* rename New func
* events trigger on write and rename
* add missing test
* fix flaking tests
* fix flaky test
* check reconcile when removed
* delete invalid file
* fix test to create files with different mod time.
* back date file instead of sleeping
* add watching file in agent command.
* fix watcher call to use new API
* add configuration and stop watcher when server stop
* add certs as watched files
* move FileWatcher to the agent start instead of the command code
* stop watcher before replacing it
* save watched files in agent
* add add and remove interfaces to the file watcher
* fix remove to not return an error
* use `Add` and `Remove` to update certs files
* fix tests
* close events channel on the file watcher even when the context is done
* extract `NotAutoReloadableRuntimeConfig` is a separate struct
* fix linter errors
* add Ca configs and outgoing verify to the not auto reloadable config
* add some logs and fix to use background context
* add tests to auto-config reload
* remove stale test
* add tests to changes to config files
* add check to see if old cert files still trigger updates
* rename `NotAutoReloadableRuntimeConfig` to `StaticRuntimeConfig`
* fix to re add both key and cert file. Add test to cover this case.
* review suggestion
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add check to static runtime config changes
* fix test
* add changelog file
* fix review comments
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* update flag description
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
* fix compilation error
* add static runtime config support
* fix test
* fix review comments
* fix log test
* Update .changelog/12329.txt
Co-authored-by: Dan Upton <daniel@floppy.co>
* transfer tests to runtime_test.go
* fix filewatcher Replace to not deadlock.
* avoid having lingering locks
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* split ReloadConfig func
* fix warning message
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* convert `FileWatcher` into an interface
* fix compilation errors
* fix tests
* extract func for adding and removing files
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: FFMMM <FFMMM@users.noreply.github.com>
Co-authored-by: Daniel Upton <daniel@floppy.co>
This adds an aws-iam auth method type which supports authenticating to Consul using AWS IAM identities.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
- `tls.incoming`: applies to the inbound mTLS targeting the public
listener on `connect-proxy` and `terminating-gateway` envoy instances
- `tls.outgoing`: applies to the outbound mTLS dialing upstreams from
`connect-proxy` and `ingress-gateway` envoy instances
Fixes#11966
Introduces the capability to configure TLS differently for Consul's
listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC
port) which is useful in scenarios where you may want the HTTPS or
gRPC interfaces to present a certificate signed by a well-known/public
CA, rather than the certificate used for internal communication which
must have a SAN in the form `server.<dc>.consul`.
Many places in consul already treated node names case insensitively.
The state store indexes already do it, but there are a few places that
did a direct byte comparison which have now been corrected.
One place of particular consideration is ensureCheckIfNodeMatches
which is executed during snapshot restore (among other places). If a
node check used a slightly different casing than the casing of the node
during register then the snapshot restore here would deterministically
fail. This has been fixed.
Primary approach:
git grep -i "node.*[!=]=.*node" -- ':!*_test.go' ':!docs'
git grep -i '\[[^]]*member[^]]*\]
git grep -i '\[[^]]*\(member\|name\|node\)[^]]*\]' -- ':!*_test.go' ':!website' ':!ui' ':!agent/proxycfg/testing.go:' ':!*.md'
We've noticed that a trace that is captured over the full duration is
too large to open on most machines. A trace.out captured over just the
interval period (30s by default) should be a more than enough time to
capture trace data.
This commit syncs ENT changes to the OSS repo.
Original commit details in ENT:
```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date: Thu Feb 10 10:23:33 2022 -0800
Vendor fork net rpc (#1538)
* replace net/rpc w consul-net-rpc/net/rpc
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* replace msgpackrpc and go-msgpack with fork from mono repo
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* gofmt all files touched
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
* xds: refactor ingress listener SDS configuration
* xds: update resolveListenerSDS call args in listeners_test
* ingress: add TLS min, max and cipher suites to GatewayTLSConfig
* xds: implement envoyTLSVersions and envoyTLSCipherSuites
* xds: merge TLS config
* xds: configure TLS parameters with ingress TLS context from leaf
* xds: nil check in resolveListenerTLSConfig validation
* xds: nil check in makeTLSParameters* functions
* changelog: add entry for TLS params on ingress config entries
* xds: remove indirection for TLS params in TLSConfig structs
* xds: return tlsContext, nil instead of ambiguous err
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* xds: switch zero checks to types.TLSVersionUnspecified
* ingress: add validation for ingress config entry TLS params
* ingress: validate listener TLS config
* xds: add basic ingress with TLS params tests
* xds: add ingress listeners mixed TLS min version defaults precedence test
* xds: add more explicit tests for ingress listeners inheriting gateway defaults
* xds: add test for single TLS listener on gateway without TLS defaults
* xds: regen golden files for TLSVersionInvalid zero value, add TLSVersionAuto listener test
* types/tls: change TLSVersion to string
* types/tls: update TLSCipherSuite to string type
* types/tls: implement validation functions for TLSVersion and TLSCipherSuites, make some maps private
* api: add TLS params to GatewayTLSConfig, add tests
* api: add TLSMinVersion to ingress gateway config entry test JSON
* xds: switch to Envoy TLS cipher suite encoding from types package
* xds: fixup validation for TLSv1_3 min version with cipher suites
* add some kitchen sink tests and add a missing struct tag
* xds: check if mergedCfg.TLSVersion is in TLSVersionsWithConfigurableCipherSuites
* xds: update connectTLSEnabled comment
* xds: remove unsued resolveGatewayServiceTLSConfig function
* xds: add makeCommonTLSContextFromLeafWithoutParams
* types/tls: add LessThan comparator function for concrete values
* types/tls: change tlsVersions validation map from string to TLSVersion keys
* types/tls: remove unused envoyTLSCipherSuites
* types/tls: enable chacha20 cipher suites for Consul agent
* types/tls: remove insecure cipher suites from allowed config
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 and TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 are both explicitly listed as insecure and disabled in the Go source.
Refs https://cs.opensource.google/go/go/+/refs/tags/go1.17.3:src/crypto/tls/cipher_suites.go;l=329-330
* types/tls: add ValidateConsulAgentCipherSuites function, make direct lookup map private
* types/tls: return all unmatched cipher suites in validation errors
* xds: check that Envoy API value matching TLS version is found when building TlsParameters
* types/tls: check that value is found in map before appending to slice in MarshalEnvoyTLSCipherSuiteStrings
* types/tls: cast to string rather than fmt.Printf in TLSCihperSuite.String()
* xds: add TLSVersionUnspecified to list of configurable cipher suites
* structs: update note about config entry warning
* xds: remove TLS min version cipher suite unconfigurable test placeholder
* types/tls: update tests to remove assumption about private map values
Co-authored-by: R.B. Boyer <rb@hashicorp.com>
R.B. Boyer