Commit Graph

74 Commits

Author SHA1 Message Date
Freddy 57b998e027
Merge pull request #9987 from hashicorp/remove-kube-dns-hack 2021-04-14 10:00:53 -06:00
freddygv 911d7dcaa8 Remove todo that was todone 2021-04-13 10:19:59 -06:00
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
Iryna Shustava ff2e70f4ce
cli: Add new `consul connect redirect-traffic` command for applying traffic redirection rules when Transparent Proxy is enabled. (#9910)
* Add new consul connect redirect-traffic command for applying traffic redirection rules when Transparent Proxy is enabled.
* Add new iptables package for applying traffic redirection rules with iptables.
2021-04-09 11:48:10 -07:00
freddygv b97d3422a7 Stable sort cidr ranges to match on 2021-04-08 11:27:57 -06:00
freddygv 69822fa5ae Remove kube-dns resolution since clusterip will be a tagged addr 2021-04-07 14:15:21 -06:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
freddygv 6c43195e2a Merge master and fix upstream config protocol defaulting 2021-03-17 21:13:40 -06:00
freddygv ca2a62d807 Rename hasChains for clarity 2021-03-17 16:42:29 -06:00
freddygv 3c7e5c3308 PR comments 2021-03-17 16:18:56 -06:00
freddygv 4c58711594 Upstreams loop is only for prepared queries and they are not CentrallyConfigured 2021-03-17 15:32:52 -06:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
freddygv a3184e6cd7 Refactor makePublicListener
By accepting a name the function can be used for other inbound listeners,
like the one for TransparentProxy.
2021-03-16 19:22:26 -06:00
freddygv d90240d367 Restore old Envoy prefix on escape hatches
This is done because after removing ID and NodeName from
ServiceConfigRequest we will no longer know whether a request coming in
is for a Consul client earlier than v1.10.
2021-03-15 14:12:57 -06:00
freddygv 68148a1dae finish moving UpstreamConfig and related fields to structs pkg 2021-03-10 21:04:13 -07:00
freddygv 4bbd495b54 Create new types for service-defaults upstream cfg 2021-03-08 22:10:27 -07:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
R.B. Boyer e87d2bb24f
xds: only try to create an ipv6 expose checks listener if ipv6 is supported by the kernel (#9765)
Fixes #9311

This only fails if the kernel has ipv6 hard-disabled. It is not sufficient to merely not provide an ipv6 address for a network interface.
2021-02-19 14:38:43 -06:00
R.B. Boyer 77424e179a
xds: prevent LDS flaps in mesh gateways due to unstable datacenter lists (#9651)
Also fix a similar issue in Terminating Gateways that was masked by an overzealous test.
2021-02-08 10:19:57 -06:00
R.B. Boyer 05d767b8d6
xds: deduplicate mesh gateway listeners in a stable way (#9650)
In a situation where the mesh gateway is configured to bind to multiple
network interfaces, we use a feature called 'tagged addresses'.
Sometimes an address is duplicated across multiple tags such as 'lan'
and 'lan_ipv4'.

There is code to deduplicate these things when creating envoy listeners,
but that code doesn't ensure that the same tag wins every time. If the
winning tag flaps between xDS discovery requests it will cause the
listener to be drained and replaced.
2021-02-05 16:28:07 -06:00
Chris Boulton 448212060a
connect: add local_request_timeout_ms to configure local_app http timeouts (#9554) 2021-01-25 13:50:00 -06:00
Freddy 2763833d32
Add DC and NS support for Envoy metrics (#9207)
This PR updates the tags that we generate for Envoy stats.

Several of these come with breaking changes, since we can't keep two stats prefixes for a filter.
2020-11-16 16:37:19 -07:00
R.B. Boyer 9b37ea7dcb
Revert "Add namespace support for metrics (OSS) (#9117)" (#9124)
This reverts commit 06b3b017d326853dbb53bc0ec08ce371265c5ce9.
2020-11-06 10:24:32 -06:00
Freddy 874efe705f
Add namespace support for metrics (OSS) (#9117) 2020-11-05 18:24:29 -07:00
freddygv 1ee039ed95 Set tgw filter router config name to cluster name 2020-09-04 12:45:05 -06:00
freddygv 194d34b09d Pass LB config to Envoy via xDS 2020-08-28 14:27:40 -06:00
R.B. Boyer f2b8bf109c
xds: use envoy's rbac filter to handle intentions entirely within envoy (#8569) 2020-08-27 12:20:58 -05:00
R.B. Boyer 63422ca9c5
connect: use stronger validation that ingress gateways have compatible protocols defined for their upstreams (#8470)
Fixes #8466

Since Consul 1.8.0 there was a bug in how ingress gateway protocol
compatibility was enforced. At the point in time that an ingress-gateway
config entry was modified the discovery chain for each upstream was
checked to ensure the ingress gateway protocol matched. Unfortunately
future modifications of other config entries were not validated against
existing ingress-gateway definitions, such as:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. create service-defaults for 'api' setting protocol=http (worked, but not ok)
3. create service-splitter or service-router for 'api' (worked, but caused an agent panic)

If you were to do these in a different order, it would fail without a
crash:

1. create service-defaults for 'api' setting protocol=http (ok)
2. create service-splitter or service-router for 'api' (ok)
3. create tcp ingress-gateway pointing to 'api' (fail with message about
   protocol mismatch)

This PR introduces the missing validation. The two new behaviors are:

1. create tcp ingress-gateway pointing to 'api' (ok)
2. (NEW) create service-defaults for 'api' setting protocol=http ("ok" for back compat)
3. (NEW) create service-splitter or service-router for 'api' (fail with
   message about protocol mismatch)

In consideration for any existing users that may be inadvertently be
falling into item (2) above, that is now officiall a valid configuration
to be in. For anyone falling into item (3) above while you cannot use
the API to manufacture that scenario anymore, anyone that has old (now
bad) data will still be able to have the agent use them just enough to
generate a new agent/proxycfg error message rather than a panic.
Unfortunately we just don't have enough information to properly fix the
config entries.
2020-08-12 11:19:20 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Daniel Nephin 07c1081d39 Fix a bunch of unparam lint issues 2020-06-24 13:00:14 -04:00
R.B. Boyer ba83b52b32
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin 13f564bdd4
Merge pull request #8074 from hashicorp/dnephin/remove-references-to-PatchSliceOfMaps
Update comments that reference PatchSliceOfMaps
2020-06-15 14:33:10 -04:00
freddygv 1e7e716742 Move compound service names to use ServiceName type 2020-06-12 13:47:43 -06:00
Daniel Nephin af063a5692 Update comments that reference PatchSliceOfMaps
To reference decode.HookWeakDecodeFromSlice instead.

Also removes a step from the adding config fields checklist which is
no longer necessary.
2020-06-09 17:43:05 -04:00
Kyle Havlovitz 5aefdea1a8
Standardize support for Tagged and BindAddresses in Ingress Gateways (#7924)
* Standardize support for Tagged and BindAddresses in Ingress Gateways

This updates the TaggedAddresses and BindAddresses behavior for Ingress
to match Mesh/Terminating gateways. The `consul connect envoy` command
now also allows passing an address without a port for tagged/bind
addresses.

* Update command/connect/envoy/envoy.go

Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* PR comments

* Check to see if address is an actual IP address

* Update agent/xds/listeners.go

Co-authored-by: Freddy <freddygv@users.noreply.github.com>

* fix whitespace

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
2020-05-21 09:08:12 -05:00
Kyle Havlovitz 28b4819882
Merge pull request #7759 from hashicorp/ingress/tls-hosts
Add TLS option for Ingress Gateway listeners
2020-05-11 09:18:43 -07:00
Freddy a37d7a42c9
Fix up enterprise compatibility for gateways (#7813) 2020-05-08 09:44:34 -06:00
Kyle Havlovitz bd6bb3bf2d Add TLS option and DNS SAN support to ingress config
xds: Only set TLS context for ingress listener when requested
2020-05-06 15:12:02 -05:00
Chris Piraino c30a7bfdfe Comment why it is ok to expect upstreams slice to not be empty 2020-05-06 15:06:13 -05:00
Kyle Havlovitz b21cd112e5 Allow ingress gateways to route traffic based on Host header
This commit adds the necessary changes to allow an ingress gateway to
route traffic from a single defined port to multiple different upstream
services in the Consul mesh.

To do this, we now require all HTTP requests coming into the ingress
gateway to specify a Host header that matches "<service-name>.*" in
order to correctly route traffic to the correct service.

- Differentiate multiple listener's route names by port
- Adds a case in xds for allowing default discovery chains to create a
  route configuration when on an ingress gateway. This allows default
  services to easily use host header routing
- ingress-gateways have a single route config for each listener
  that utilizes domain matching to route to different services.
2020-05-06 15:06:13 -05:00
Freddy f5c1e5268b
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
freddygv ac809ec635 Add authz filter when creating filterchain 2020-04-27 11:08:41 -06:00
freddygv 8697ab71e4 Fix listener error handling 2020-04-27 11:08:41 -06:00
freddygv 6ecb3b7a42 Skip filter chain creation if no client cert 2020-04-27 11:08:41 -06:00
freddygv 3849b066a6 Allow terminating-gateway to setup listener before servicegroups are known 2020-04-27 11:08:40 -06:00
freddygv 929491c979 Add subset support 2020-04-27 11:08:40 -06:00
freddygv 2e35a9bb18 Add xds cluster/listener/endpoint management 2020-04-27 11:08:40 -06:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00