Commit Graph

271 Commits

Author SHA1 Message Date
freddygv eeccba945d Replace TransparentProxy bool with ProxyMode
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:

- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.

This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
2021-04-12 09:35:14 -06:00
Tara Tufano b8e7a90f77
add http2 ping health checks (#8431)
* add http2 ping checks

* fix test issue

* add h2ping check to config resources

* add new test and docs for h2ping

* fix grammatical inconsistency in H2PING documentation

* resolve rebase conflicts, add test for h2ping tls verification failure

* api documentation for h2ping

* update test config data with H2PING

* add H2PING to protocol buffers and update changelog

* fix typo in changelog entry
2021-04-09 15:12:10 -04:00
R.B. Boyer 82245585c6
connect: add toggle to globally disable wildcard outbound network access when transparent proxy is enabled (#9973)
This adds a new config entry kind "cluster" with a single special name "cluster" where this can be controlled.
2021-04-06 13:19:59 -05:00
Freddy 63dcb7fa76
Add TransparentProxy option to proxy definitions 2021-03-17 17:01:45 -06:00
Christopher Broglie 94b02c3954 Add support for configuring TLS ServerName for health checks
Some TLS servers require SNI, but the Golang HTTP client doesn't
include it in the ClientHello when connecting to an IP address. This
change adds a new TLSServerName field to health check definitions to
optionally set it. This fixes #9473.
2021-03-16 18:16:44 -04:00
freddygv 7a3625f58b Add TransparentProxy opt to proxy definition 2021-03-11 11:37:21 -07:00
Daniel Nephin af2431793b streaming: default rpc.enable_streaming to true
So that all servers will start the grpc server used by streaming
2021-02-25 14:06:04 -05:00
Daniel Nephin 005702e098 config: rename testCase fields
So that their name better reflects their purpose
2021-02-16 14:40:16 -05:00
Daniel Nephin e6badb3129 config: make TestLoad_IntegrationWithFlags easier to work with
Replace the large table of tests with individual calls to run(). By using
runCase, failure messages will include the line number for the test case, as
well as a line number from the test functions.

Example:
=== FAIL: agent/config TestLoad_IntegrationWithFlags/failing_case (0.01s)
    runtime_test.go:4721: case: failing case
    runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"

Previous:
    runtime_test.go:4864: error "data_dir cannot be empty" does not contain "I expected this error"

Without the line number to the testCase data, debugging these tests is
difficult. It is impossible to jump directly to the test case, and
difficult to find the location because of many similarly named cases.
2021-02-16 14:40:16 -05:00
Daniel Nephin db53954a3f move test case iteration to caller
To make the test case logic more obvious
2021-02-16 14:40:16 -05:00
Daniel Nephin 7499e38f2b config: remove test cases for impossible scenarios
AEInterval is overridden by NonUserSource, so there is no way for a user
to set this value. These two cases represented impossible real world
scenarios.

Instead the test is replaced with one that shows that the AEInterval can
not be set by config.

This change allows us to remove the hcltail and jsontail fields from
testCase
2021-02-16 14:40:15 -05:00
Daniel Nephin 5f2c358255 Fix error checking
There were two identical if lines, remove one and use a switch/case so the compiler
can catch this problem.
2021-02-16 14:40:15 -05:00
Daniel Nephin 1ff2525cee config: move testing shims to LoadOpts
This will allow us to eventually port these tests to use config.Load instead of
unexported functions.
2021-02-16 14:40:15 -05:00
Daniel Nephin a877ec79b6 Remove patchActual, does not appear to be necessary
also small rename and fix comment
2021-02-16 14:40:15 -05:00
Daniel Nephin fc88c28bb9 config: make config.TestLoad_FullConfig use config.Load
This commit makes a number of changes that should make
TestLoad_FullConfig easier to work with, and make the test more like
real world scenarios.

* use separate files in testdata/ dir to store the config source.
  Separate files are much easier to edit because editors can syntax
  highlight json/hcl, and it makes strings easier to find. Previously
  trying to find strings would match strings used in other tests.
* use the exported config.Load interface instead of internal NewBuilder
  and BuildAndValidate.
* remove the tail config overrides, which are only necessary with
  nonZero works.
2021-01-27 17:51:53 -05:00
Daniel Nephin aa42ff5d81 config: Unexport Builder and NewBuilder
This type and constructor are implementation details of config loading.
All callers should use config.Load.
2021-01-27 17:41:53 -05:00
Daniel Nephin 08b2039f5a config: replace calls to config.NewBuilder with config.Load
This is another incremental change to reduce config loading to a single
small interface. All calls to NewBuilder can be replaced with Load.
2021-01-27 17:34:43 -05:00
Daniel Nephin bd545963cc config: improve the interface of Load
This commit reduces the interface to Load() a bit, in preparation for
unexporting NewBuilder and having everything call Load.

The three arguments are reduced to a single argument by moving the other
two into the options struct.

The three return values are reduced to two by moving the RuntimeConfig
and Warnings into a LoadResult struct.
2021-01-27 17:34:43 -05:00
Daniel Nephin 78b02663e9 config: Use golden for TestRuntimeConfig_Sanitize
A golden file makes the expected value easier to work with. This change also
removes a number of shims for enterprise and replaces them with a single one
for the golden filename.
2021-01-11 14:34:03 -05:00
Pierre Souchay 70d2da7582
Display a warning when rpc.enable_streaming = true is set on a client (#9530)
* Display a warning when rpc.enable_streaming = true is set on a client

This option has no effect when running as an agent

* Added warning when server starts with use_streaming_backend but without rpc.enable_streaming

* Added unit test
2021-01-08 15:23:23 -05:00
Daniel Nephin d5bdc2f539
Merge pull request #9249 from hashicorp/dnephin/config-tags
config: use fields to detect enterprise-only settings
2021-01-07 19:49:29 -05:00
Daniel Nephin 0679a23921
Merge pull request #9251 from hashicorp/dnephin/config-cleanup-flags-and-opts
config: move testing shims and cleanup some defaults
2021-01-07 19:11:22 -05:00
Daniel Nephin 2d0f33591e config: remove t.Parallel and some unused fields from tests
Use go-cmp for better diffs in tests
2021-01-07 18:57:52 -05:00
Michael Montgomery 5a70c2c7e8 Remove unneeded test 2021-01-04 19:47:13 -06:00
Michael Montgomery a1748aa2cb Merge branch 'master' into 6074-allow-config-MaxHeaderBytes 2020-12-30 14:14:05 -06:00
Michael Montgomery 519f537b8b Fixed failing tests
Removed use of `NewTestAgent`, per review comment
Removed CLI flag, per review comment
Updated website documentation
Added changelog entry
2020-12-30 14:09:50 -06:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
Daniel Nephin 8e783fb37b config: move testing shims to BuilderOpts
And remove the devMode field from builder.

This change helps make the Builder state more explicit by moving inputs to the BuilderOps struct,
leaving only fields that can change during Builder.Build on the Builder struct.
2020-11-20 18:31:10 -05:00
Daniel Nephin fcbdfa393e config: Use LiteralSource for some defaults
Using the LiteralSource makes it much easier to find default values, because an IDE reports
the location of a default. With an HCL string they are harder to discover.

Also removes unnecessary mapstructure.Decodes of constant values.
2020-11-20 18:14:17 -05:00
Michael Montgomery ed719c978b Merge branch 'master' into 6074-allow-config-MaxHeaderBytes 2020-11-20 07:43:53 -06:00
Matt Keeler 4bca029be9
Refactor to call non-voting servers read replicas (#9191)
Co-authored-by: Kit Patella <kit@jepsen.io>
2020-11-17 10:53:57 -05:00
Kit Patella 36aaf86647 Merge branch 'mkcp/telemetry/add-all-metric-definitions' of ssh://github.com/hashicorp/consul into mkcp/telemetry/add-all-metric-definitions 2020-11-16 15:26:12 -08:00
Kit Patella 4c30ebbb73 fix some tests that were broken from the TelemetryConfig change 2020-11-16 15:22:36 -08:00
Kit Patella 7ec3ad5b73
linting: sort and group import 2020-11-16 14:17:24 -08:00
Kit Patella 1f0b26c9d3 update runtime_test to handle PrometheusOpts expiry field change 2020-11-16 14:16:12 -08:00
Matt Keeler 755fb72994
Switch to using the external autopilot module 2020-11-09 09:22:11 -05:00
R.B. Boyer be9122a8c4
agent: sanitize ui metrics proxy header values on agent/self endpoint (#9104) 2020-11-05 13:25:27 -06:00
R.B. Boyer c8c87ec317
agent: introduce path allow list for requests going through the metrics proxy (#9059)
Added a new option `ui_config.metrics_proxy.path_allowlist`. This defaults to `["/api/v1/query", "/api/v1/query_range"]` when the metrics provider is set to `prometheus`.

Requests that do not use one of the allow-listed paths (via exact match) get a 403 Forbidden response instead.
2020-10-30 16:49:54 -05:00
Michael Montgomery 1c0a46849a Resolves #6074. Adds new option to configure HTTP Server's MaxHeaderBytes with option `-http-max-header-bytes`
Adds tests for behavior
2020-10-29 12:38:19 -05:00
Daniel Nephin 1dcbfd17c3 health: change the name of UseStreamingBackend config
Remove it from the cache section, and update the docs.
2020-10-23 17:47:01 -04:00
Daniel Nephin dd0e8d42c4
Merge pull request #8825 from hashicorp/streaming/add-config
streaming: add config and docs
2020-10-09 14:33:58 -04:00
Daniel Nephin 195511140f config: add field for enabling streaming in the client
agent: register the new streaming cache-type
2020-10-09 14:11:34 -04:00
Matt Keeler 44017f819e
Remove oss/ent divergence of runtime_test.go (#8903) 2020-10-09 10:45:11 -04:00
Kit Patella 40b9769b1f
Merge pull request #8877 from hashicorp/mkcp/telemetry/consul.api.http
Add flag for disabling 1.9 metrics backwards compatibility and warnings when set to default
2020-10-08 13:22:37 -07:00
Matt Keeler 141eb60f06
Add per-agent reconnect timeouts (#8781)
This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.

This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
2020-10-08 15:02:19 -04:00
Daniel Nephin 05df7b18a9 config: add field for enabling streaming RPC endpoint 2020-10-08 12:11:20 -04:00
Kit Patella 328036dd37 add config flag to disable 1.9 metrics backwards compatibility. Add warnings on start and reload on default value 2020-10-07 17:12:52 -07:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
Kit Patella 9851a16d05 remove consul.api.http from filtered metric prefixes 2020-10-02 14:16:02 -07:00
Kit Patella 5524a43f10
Merge pull request #8271 from coignetp/http-metrics-label
Use method and path as labels for http metrics
2020-10-02 13:41:48 -07:00