* Add ui-content-path flag
* tests complete, regex validator on string, index.html updated
* cleaning up debugging stuff
* ui: Enable ember environment configuration to be set via the go binary at runtime (#5934)
* ui: Only inject {{.ContentPath}} if we are makeing a prod build...
...otherwise we just use the current rootURL
This gets injected into a <base /> node which solves the assets path
problem but not the ember problem
* ui: Pull out the <base href=""> value and inject it into ember env
See previous commit:
The <base href=""> value is 'sometimes' injected from go at index
serve time. We pass this value down to ember by overwriting the ember
config that is injected via a <meta> tag. This has to be done before
ember bootup.
Sometimes (during testing and development, basically not production)
this is injected with the already existing value, in which case this
essentially changes nothing.
The code here is slightly abstracted away from our specific usage to
make it easier for anyone else to use, and also make sure we can cope
with using this same method to pass variables down from the CLI through
to ember in the future.
* ui: We can't use <base /> move everything to javascript (#5941)
Unfortuantely we can't seem to be able to use <base> and rootURL
together as URL paths will get doubled up (`ui/ui/`).
This moves all the things that we need to interpolate with .ContentPath
to the `startup` javascript so we can conditionally print out
`{{.ContentPath}}` in lots of places (now we can't use base)
* fixed when we serve index.html
* ui: For writing a ContentPath, we also need to cope with testing... (#5945)
...and potentially more environments
Testing has more additional things in a separate index.html in `tests/`
This make the entire thing a little saner and uses just javascriopt
template literals instead of a pseudo handbrake synatx for our
templating of these files.
Intead of just templating the entire file this way, we still only
template `{{content-for 'head'}}` and `{{content-for 'body'}}`
in this way to ensure we support other plugins/addons
* build: Loosen up the regex for retrieving the CONSUL_VERSION (#5946)
* build: Loosen up the regex for retrieving the CONSUL_VERSION
1. Previously the `sed` replacement was searching for the CONSUL_VERSION
comment at the start of a line, it no longer does this to allow for
indentation.
2. Both `grep` and `sed` where looking for the omment at the end of the
line. We've removed this restriction here. We don't need to remove it
right now, but if we ever put the comment followed by something here the
searching would break.
3. Added `xargs` for trimming the resulting version string. We aren't
using this already in the rest of the scripts, but we are pretty sure
this is available on most systems.
* ui: Fix erroneous variable, and also force an ember cache clean on build
1. We referenced a variable incorrectly here, this fixes that.
2. We also made sure that every `make` target clears ember's `tmp` cache
to ensure that its not using any caches that have since been edited
everytime we call a `make` target.
* added docs, fixed encoding
* fixed go fmt
* Update agent/config/config.go
Co-Authored-By: R.B. Boyer <public@richardboyer.net>
* Completed Suggestions
* run gofmt on http.go
* fix testsanitize
* fix fullconfig/hcl by setting correct 'want'
* ran gofmt on agent/config/runtime_test.go
* Update website/source/docs/agent/options.html.md
Co-Authored-By: Hans Hasselberg <me@hans.io>
* Update website/source/docs/agent/options.html.md
Co-Authored-By: kaitlincarter-hc <43049322+kaitlincarter-hc@users.noreply.github.com>
* remove contentpath from redirectFS struct
1. Remove ember-cli-clipboard dependency
2. Provide a new copy-button component implementing the same
interface as ^ but make the clipboard functionality injectable
3. Provide 2 implementations of a Clipboard. One using clipboard.js (as
previously) and an additional local storage 'clipboard'.
4. add a BDD step to assert whats in the clipboard (the fake one)
Main reason here is that `document.exec` must be called by a user
interaction
* ui: Normal proxies line to services, sidecars to instances
Following on from https://github.com/hashicorp/consul/pull/5933 we
noticed that 'normal' proxies should link to the service, rather than
the service instance. Additionally proxy 'searching' within the
repository should take into account the name of the node that the
originating service is on (sidecar proxies are generally co-located)
Added an additional test here to prove that a sidecar-proxy with the
same service id but on a different node does not show the sidecar proxy
link.
1. All {{ivy-codemirror}} components need 'refreshing' when they become
visible via our own `didAppear` method on the `{{code-editor}}`
component
(also see:)
- https://github.com/hashicorp/consul/pull/4190#discussion_r193270223
- 73db111db8 (r225264296)
2. On initial investigation, it looks like the component we are using
for the code editor doesn't distinguish between setting its `value`
programatically and a `keyup` event, i.e. an interaction from the user.
We currently pretend that whenever its `value` changes, it is a `keyup`
event. This means that when we reset the `value` to `""`
programmatically for form resetting purposes, a 'pretend keyup' event
would also be fired, which would in turn kick off the validation, which
would fail and show an error message for empty values in other fields of
the form - something that is perfectly valid if you haven't typed
anything yet. We solved this by checking for `isPristine` on fields that
are allowed to be empty before you have typed anything.
1. Amends our `base` animation placeholder to always reset
transition-duration. This has no effect on other components that are
already using this animation.
2. Adds a confirming class whenever a key is pressed, to show the green
tick. Uses CSS via `transition-delay` for debouncing.
Previously we were creating a fake event and amending the name of the
fake event, this meant that other `event.target` properties weren't
being passed through (in this instance `checked`) this changes the
approach to not use fake events, and allows you to overwrite the name
that the form uses for `handleEvent`
1. Includes Datacenter variable for intperolation
2. Amends text on the Settings page to reflect new keyword
3. Adds further acceptance testing around the new dashboard buttons
Encodes any variables passed in to be used for template interpolation, but importantly nothing else in the URL apart from the variables themselves. 'Generally' service names are reasonably URL safe, but we know of usecases using at least /s in service names.
This PR adds a new {{template-anchor}} component. This component lets you specify a 'href template' in a handlebars like format instead of a normal string href. This template will be interpolated with the contents of a vars="" attribute.
Also contains code to add an extra UI Setting to be able to store a template to be used for this anchor in localStorage
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.
Also includes refinements/improvements for easier testing of deeply nested components.
1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles
Also see:
* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
* ui: Replaces Service listing filterbar with a phrase-editor search (#5507)
1. New phrase-editor restricting search to whole phrases (acts on
enter key). Allows removal of previously entered phrases
2. Searching now allows arrays of terms, multiple terms work via AND
If a service instance show page is being viewed and the service instance
is deregistered, this closes the blocking query for the proxy as well as
the instance (the instances query will be clsed on the error)
Also adds skipped tests to nag in future
Previously the tomography wasn't using ember `get` so proxy updates
(specifically here whilst receiving a blocking update) wasn't working.
This adds `get` here until we update to newer `get`less ember and also
refactors slightly removing `n` and using `distance.length` instead
Skipped tests are adding here to nag us to come back here at some point.
...also:
Temporarily overwrites native setTimeout and setInterval for e2e/acceptance
testing similar to how XHR is overwritten for e2e/acceptance testing.
This makes the blocking query acceptance tests run faster until we add a
better burstable rate limiter for blocking queries.
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
Also:
Add support for blocking queries on the service instance detail page
1. Previous we could return undefined when a service instance has no
proxy, but this means we have nothing to attach `meta` to. We've changed
this to return an almost empty object, so with only a meta property.
At first glance there doesn't seem to be any way to provide a proxy
object to templates and be able to detect whether it is actually null
or not so we instead change some conditional logic in the templates to
detect the property we are using to generate the anchor.
2. Made a `pauseUntil` test helper function for steps where we wait for
things. This helps for DRYness but also means if we can move away from
setInterval to something else later, we can do it in one place
3. Whilst running into point 1 here, we managed to make the blocking
queries eternally loop. Whilst this is due to an error in the code and
shouldn't ever happen whilst in actual use, we've added an extra check
so that we only recur/loop the blocking query if the previous response has a
`meta.cursor`
Adds support for blocking queries on the node detail page (#5489)
1. Moves data re-shaping for the templates variables into a repository
so they are easily covered by blocking queries (into coordinatesRepo)
2. The node API returns a 404 as signal for deregistration, we also
close the sessions and coordinates blocking queries when this happens
This commit includes several pieces of functionality to enable services
to be removed and the page to present information that this has happened
but also keep the deleted information on the page. Along with the more
usual blocking query based listing.
To enable this:
1. Implements `meta` on the model (only available on collections in
ember)
2. Adds new `catchable` ComputedProperty alongside a `listen` helper for
working with specific errors that can be thrown from EventSources in an
ember-like way. Briefly, normal computed properties update when a
property changes, EventSources can additionally throw errors so we can
catch them and show different visuals based on that.
More recommendations for blocking queries clients was added here:
https://github.com/hashicorp/consul/pull/5358
This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)
The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
* ui: Add forking based on service instance id existence
Proxies come in 2 flavours, 'normal' and sidecar. We know when a proxy
is a sidecar proxy based on whether a DestinationServiceID is set.
LocalServiceAddress and LocalServicePort are only relevant for sidecar
proxies.
This adds template logic to show different text depending on this
information.
Additionally adds test around connect proxies (#5418)
1. Adds page object for the instance detail page
2. Adds further scenario steps used in the tests
3. Adds acceptance testing around the instance detail page. Services
with proxies and the sidecar proxies and proxies themselves
4. Adds datacenter column for upstreams
5. Fixes bug routing bug for decision as to whether to request proxy
information or not
Add totals to some listing views, remove healthcheck totals
1. Adds markup to render totals for Services, Nodes, Intentions and v1
ACLs
2. Removes counts from healthcheck filters, and therefore simplify text,
moving the copy to the templates
3. Alter test to reflect the fact that the text of the buttons are no
static in the component template rather than a dynamic attribute
This gives more prominence to 'Service Instances' as opposed to 'Services'. It also begins to surface Connect related 'nouns' such as 'Proxies' and 'Upstreams' and begins to interconnect them giving more visibility to operators.
Various smaller changes:
1. Move healthcheck-status component to healthcheck-output
2. Create a new healthcheck-status component for showing the number of
checks plus its icon
3. Create a new healthcheck-info component to group multiple statuses
plus a different view if there are no checks
4. Componentize tag-list
* ui: Add ember steps:list command for listing available steps
1. Adds `command` addon to house the new command
2. Start to organize out the steps themselves, bring a bit more order to
things ready to dedupe and cleanup
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
Adds xhr connection managment to http/1.1 installs
This includes various things:
1. An object pool to 'acquire', 'release' and 'dispose' of objects, also
a 'purge' to completely empty it
2. A `Request` data object, mainly for reasoning about the object better
3. A pseudo http 'client' which doens't actually control the request
itself but does help to manage the connections
An initializer is used to detect the script element of the consul-ui sourcecode
which we use later to sniff the protocol that we are most likely using for API access
`window` and `document` are easily injected anyhow, but this
primarily this keeps everything dom related in the same place.
Included here are changes to make all ember related objects use the dom
service `document` and `viewport` instead of just `document` and
`window`.
Quote from a previous PR (#4924) which explains the thinking around this:
> Now I have all these things in the dom service, it would make sense
to get window from there also. I was thinking of making a viewport
method, which would be a nice word whether window was a browser window,
an iframe (not really a window) like when ember testing, or anything
else. To me the viewport is what we are actually talking about here.
1. Ensure any unexpected developer errors are passed through/shown
2. Previously when errors where returns/resolved the special
isEnabled/isAuthorized would never get resolved. This was fine as they
were set to false to start with anyway, but this resolves them again to
false for completeness
3. Improved unit testing coverage
Move all the dom-things to use the dom service in tabular-collection, feedback-dialog, list-collection and node show. Move get-component-factory into utils/dom and use dom.root() in a few more places
This includes an additional `dom.components` method which gives you a
list of components matching the selector instead of just one.
This does several things to make improving the search experience easier
moving forwards:
1. Separate searching off from filtering. 'Searching' can be thought of
as specifically 'text searching' whilst filtering is more of a
boolean/flag search.
2. Decouple the actual searching functionality to almost pure,
isolated / unit testable units and unit test. (I still import embers get
which, once I upgrade to 3.5, I shouldn't need)
3. Searching rules are now configurable from the outside, i.e. not
wrapped in Controllers or Components.
4. General searching itself now can use an asynchronous approach based on
events. This prepares for future possibilities of handing off the
searching to a web worker or elsewhere, which should aid in large scale
searching and prepares the way for other searching methods.
5. Adds the possibility of have multiple searches in one
template/route/page.
Additionally, this adds a WithSearching mixin to aid linking the
searching to ember in an ember-like way in a single place. Plus a
WithListeners mixin to aid with cleaning up of event listeners on
Controller/Component destruction.
Post-initial work I slightly changed the API of create listeners:
Returning the handler from a `remover` means you can re-add it again if you
want to, this avoids having to save a reference to the handler elsewhere
to do the same.
The `remove` method itself now returns an array of handlers, again you
might want to use these again or something, and its also more useful
then just returning an empty array.
The more I look at this the more I doubt that you'll ever use `remove`
to remove individual handlers, you may aswell just use the `remover`
returned from add. I've added some comments to reflect this, but they'll
likely be removed once I'm absolutely sure of this.
I also added some comments for WithSearching to explain possible further
work re: moving `searchParams` so it can be `hung` off the
controller object
In 858b05fc31 (diff-46ef88aa04507fb9b039344277531584)
we removed encoding values in pathnames as we thought they were
eventually being encoded by `ember`. It looks like this isn't the case.
Turns out sometimes they are encoded sometimes they aren't. It's complicated.
If at all possible refer to the PR https://github.com/hashicorp/consul/pull/5206.
It's related to the difference between `dynamic` routes and `wildcard` routes.
Partly related to this is a decision on whether we urlencode the slashes within service names or not. Whilst historically we haven't done this, we feel its a good time to change this behaviour, so we'll also be changing services to use dynamic routes instead of wildcard routes. So service links will then look like /ui/dc-1/services/application%2Fservice rather than /ui/dc-1/services/application/service
Here, we define our routes in a declarative format (for the moment at least JSON) outside of Router.map, and loop through this within Router.map to set all our routes using the standard this.route method. We essentially configure our Router from the outside. As this configuration is now done declaratively outside of Router.map we can also make this data available to href-to and paramsFor, allowing us to detect wildcard routes and therefore apply urlencoding/decoding.
Where I mention 'conditionally' below, this is detection is what is used for the decision.
We conditionally add url encoding to the `{{href-to}}` helper/addon. The
reasoning here is, if we are asking for a 'href/url' then whatever we
receive back should always be urlencoded. We've done this by reusing as much
code from the original `ember-href-to` addon as possible, after this
change every call to the `{{href-to}}` helper will be urlencoded.
As all links using `{{href-to}}` are now properly urlencoded. We also
need to decode them in the correct place 'on the other end', so..
We also override the default `Route.paramsFor` method to conditionally decode all
params before passing them to the `Route.model` hook.
Lastly (the revert), as we almost consistently use url params to
construct API calls, we make sure we re-encode any slugs that have been
passed in by the user/developer. The original API for the `createURL`
function was to allow you to pass values that didn't need encoding,
values that **did** need encoding, followed by query params (which again
require url encoding)
All in all this should make the entire ember app url encode/decode safe.
In order to continue supporting the legacy ACL system, we replace
the 500 error from a non-existent `self` endpoint with a response of a
`null` `AccessorID` - which makes sense (a null AccessorID means old
API)
We then redirect the user to the old ACL pages which then gives a 403
if their token was wrong which then redirects them back to the login page.
Due to the multiple redirects and not wanting to test the validity of the token
before redirecting (thus calling the same API endpoint twice), it is not
straightforwards to turn the 'faked' response from the `self` endpoint
into an error (flash messages are 'lost' through multiple redirects).
In order to make this a slightly better experience, you can now return a
`false` during execution of an action requiring success/failure
feedback, this essentially skips the notification, so if the action is
'successful' but you don't want to show the notification, you can. This
resolves showing a successful notification when the `self` endpoint
response is faked. The last part of the puzzle is to make sure that the
global 403 catching error in the application Route also produces an
erroneous notification.
Please note this can only happen with a ui client using the new ACL
system when communicating with a cluster using the old ACL system, and
only when you enter the wrong token.
Lastly, further acceptance tests have been added around this
This commit also adds functionality to avoid any possible double
notification messages, to avoid UI overlapping
In some circumstances a consul 1.4 client could be running in an
un-upgraded 1.3 or lower cluster. Currently this gives a 500 error on
the new ACL token endpoint. Here we catch this specific 500 error/message
and set the users AccessorID to null. Elsewhere in the frontend we use
this fact (AccessorID being null) to decide whether to present the
legacy or the new ACL UI to the user.
Also:
- Re-adds in most of the old style ACL acceptance tests, now that we are keeping the old style UI
- Restricts code editors to HCL only mode for all `Rules` editing (legacy/'half legacy'/new style)
- Adds a [Stop using] button to the old style ACL rows so its possible to logout.
- Updates copy and documentation links for the upgrade notices
1. Unskip some trivial tests that were being tested higher up
2. Istanbul ignore some code for coverage.
1. Things that I didn't write and need to 100% follow
2. The source code checking test that has Istanbul code injected into
it
3. Add a few simple test cases
4. Support passing port numbers through to `ember serve` and `ember
test` for use cases that would benefit from being able to configure the
ports things are served over but still use `yarn run` thus reusing the
`yarn run` config in `package.json`
Repositories are a class of services to help with CRUD actions, most of
the functionality is reused across various Models. This creates a new
repository service that centralizes all this reused functionality.
Inheritance via ember `Service.extend` is used as opposed to
decorating via Mixins.
1. Move all repository services (and their tests) to a
services/repository folder
2. Standardize on a singular name format 'node vs nodes'
3. Create a new 'repository' service to centralize functionality. This
should be extended by 'repository' services
Joel Kuzmarski