* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
* convert `IndexID` of `session_checks` table
* convert `indexSession` of `session_checks` table
* convert `indexNodeCheck` of `session_checks` table
* partition `indexID` and `indexSession` of `tableSessionChecks`
* fix oss linter
* fix review comments
* remove partition for Checks as it's always use the session partition
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* Support vault auth methods for the Vault connect CA provider
* Rotate the token (re-authenticate to vault using auth method) when the token can no longer be renewed
Fixes an issue described in #10132, where if two DCs are WAN federated
over mesh gateways, and the gateway in the non-primary DC is terminated
and receives a new IP address (as is commonly the case when running them
on ephemeral compute instances) the primary DC is unable to re-establish
its connection until the agent running on its own gateway is restarted.
This was happening because we always preferred gateways discovered by
the `Internal.ServiceDump` RPC (which would fail because there's no way
to dial the remote DC) over those discovered in the federation state,
which is replicated as long as the primary DC's gateway is reachable.
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* partition `tableSessions` table
* fix sessions to use UUID and fix prefix index
* fix oss build
* clean up unused functions
* fix oss compilation
* add a partition indexer for sessions
* Fix oss to not have partition index
* fix oss tests
* remove unused func `prefixIndexFromServiceNameAsString`
* fix test error check
* remove unused operations_ent.go and operations_oss.go func
* remove unused const
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* state: port KV and Tombstone tables to new pattern
* go fmt'ed
* handle wildcards for tombstones
* Fix graveyard ent vs oss
* fix oss compilation error
* add partition to tombstones and kv state store indexes
* refactor to use `indexWithEnterpriseIndexable`
* partition kvs indexID table
* add `partitionedIndexEntryName` in oss for test purpose
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* add `singleValueID` implementation assertions
* remove entmeta reference from oss
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
These two fields do not appear to be used anywhere. We use the structs.ACLPolicy ID in the
ACLResolver cache, but the acl.Policy ID and revision are not used.
* Support Vault Namespaces explicitly in CA config
If there is a Namespace entry included in the Vault CA configuration,
set it as the Vault Namespace on the Vault client
Currently the only way to support Vault namespaces in the Consul CA
config is by doing one of the following:
1) Set the VAULT_NAMESPACE environment variable which will be picked up
by the Vault API client
2) Prefix all Vault paths with the namespace
Neither of these are super pleasant. The first requires direct access
and modification to the Consul runtime environment. It's possible and
expected, not super pleasant.
The second requires more indepth knowledge of Vault and how it uses
Namespaces and could be confusing for anyone without that context. It
also infers that it is not supported
* Add changelog
* Remove fmt.Fprint calls
* Make comment clearer
* Add next consul version to website docs
* Add new test for default configuration
* go mod tidy
* Add skip if vault not present
* Tweak changelog text
* Remove some usage of md5 from the system
OSS side of https://github.com/hashicorp/consul-enterprise/pull/1253
This is a potential security issue because an attacker could conceivably manipulate inputs to cause persistence files to collide, effectively deleting the persistence file for one of the colliding elements.
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
* add root_cert_ttl option for consul connect, vault ca providers
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
* add changelog, pr feedback
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* Update .changelog/11428.txt, more docs
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
* Update website/content/docs/agent/options.mdx
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Daniel Nephin <dnephin@hashicorp.com>
Co-authored-by: Kyle Havlovitz <kylehav@gmail.com>
The api module has decoding functions that rely on 'kind' being present
of payloads. This is so that we can decode into the appropriate api type
for the config entry.
This commit ensures that a static kind is marshalled in responses from
Consul's api endpoints so that the api module can decode them.
Existing config entries prefixed by service- are specific to individual
services. Since this config entry applies to partitions it is being
renamed.
Additionally, the Partition label was changed to Name because using
Partition at the top-level and in the enterprise meta was leading to the
enterprise meta partition being dropped by msgpack.
We no long need to read the acl serf tag, because servers are always either ACL enabled or
ACL disabled.
We continue to write the tag so that during an upgarde older servers will see the tag.
Replace it with an implementation that returns an error, and rename some symbols
to use a Deprecated suffix to make it clear.
Also remove the ACLRequest struct, which is no longer referenced.
These methods only called a single function. Wrappers like this end up making code harder to read
because it adds extra ways of doing things.
We already have many helper functions for constructing these types, we don't need additional methods.
structs.ACLForceSet was deprecated 4 years ago, it should be safe to remove now.
ACLBootstrapNow was removed in a recent commit. While it is technically possible that a cluster with mixed version
could still attempt a legacy boostrap, we documented that the legacy system was deprecated in 1.4, so no
clusters that are being upgraded should be attempting a legacy boostrap.
Signed-off-by: Jakub Sokołowski <jakub@status.im>
* agent: add failures_before_warning setting
The new setting allows users to specify the number of check failures
that have to happen before a service status us updated to be `warning`.
This allows for more visibility for detected issues without creating
alerts and pinging administrators. Unlike the previous behavior, which
caused the service status to not update until it reached the configured
`failures_before_critical` setting, now Consul updates the Web UI view
with the `warning` state and the output of the service check when
`failures_before_warning` is breached.
The default value of `FailuresBeforeWarning` is the same as the value of
`FailuresBeforeCritical`, which allows for retaining the previous default
behavior of not triggering a warning.
When `FailuresBeforeWarning` is set to a value higher than that of
`FailuresBeforeCritical it has no effect as `FailuresBeforeCritical`
takes precedence.
Resolves: https://github.com/hashicorp/consul/issues/10680
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Co-authored-by: Jakub Sokołowski <jakub@status.im>
Some users are defining routing configurations that do not have associated services. This commit surfaces these configs in the topology visualization. Also fixes a minor internal bug with non-transparent proxy upstream/downstream references.
- The TestNodeService helper created services with the fixed name "web",
and now that name is overridable.
- The discovery chain snapshot didn't have prepared query endpoints so
the endpoints tests were missing data for prepared queries
Follow up to https://github.com/hashicorp/consul/pull/10737#discussion_r682147950
Renames all variables for acl.Authorizer to use `authz`. Previously some
places used `rule` which I believe was an old name carried over from the
legacy ACL system.
A couple places also used authorizer.
This commit also removes another couple of authorizer nil checks that
are no longer necessary.
Follow up to https://github.com/hashicorp/consul/pull/10737#discussion_r680134445
Move the check for the Intention.DestinationName into the Authorizer to remove the
need to check what kind of Authorizer is being used.
It sounds like this check is only for legacy ACLs, so is probably just a safeguard
.
CatalogDestinationsOnly is a passthrough that would enable dialing
addresses outside of Consul's catalog. However, when this flag is set to
true only _connect_ endpoints for services can be dialed.
This flag is being renamed to signal that non-Connect endpoints can't be
dialed by transparent proxies when the value is set to true.
Previously we would return an error if duplicate paths were specified.
This could lead to problems in cases where a user has the same path,
say /healthz, on two different ports.
This validation was added to signal a potential misconfiguration.
Instead we will only check for duplicate listener ports, since that is
what would lead to ambiguity issues when generating xDS config.
In the future we could look into using a single listener and creating
distinct filter chains for each path/port.
The prior solution to call reply.Reset() aged poorly since newer fields
were added to the reply, but not added to Reset() leading serial
blocking query loops on the server to blend replies.
This could manifest as a service-defaults protocol change from
default=>http not reverting back to default after the config entry
reponsible was deleted.
* Save exposed HTTP or GRPC ports to the agent's store
* Add those the health checks API so we can retrieve them from the API
* Change redirect-traffic command to also exclude those ports from inbound traffic redirection when expose.checks is set to true.
Also fixes a bug with listing kind=mesh config entries. ValidateConfigEntryKind was only being used by
the List endpoint, and was yet another place where we have to enumerate all the kinds.
This commit removes ValidateConfigEntryKind and uses MakeConfigEntry instead. This change removes
the need to maintain two separate functions at the cost of creating an instance of the config entry which will be thrown away immediately.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Previously we would associate the address of a discovery chain target
with the discovery chain's filter chain. This was broken for a few reasons:
- If the upstream is a virtual service, the client proxy has no way of
dialing it because virtual services are not targets of their discovery
chains. The targets are distinct services. This is addressed by watching
the endpoints of all upstream services, not just their discovery chain
targets.
- If multiple discovery chains resolve to the same target, that would
lead to multiple filter chains attempting to match on the target's
virtual IP. This is addressed by only matching on the upstream's virtual
IP.
NOTE: this implementation requires an intention to the redirecting
virtual service and not just to the final destination. This is how
we can know that the virtual service is an upstream to watch.
A later PR will look into traversing discovery chains when computing
upstreams so that intentions are only required to the discovery chain
targets.
No config entry needs a Kind field. It is only used to determine the Go type to
target. As we introduce new config entries (like this one) we can remove the kind field
and have the GetKind method return the single supported value.
In this case (similar to proxy-defaults) the Name field is also unnecessary. We always
use the same value. So we can omit the name field entirely.
This config entry is being renamed primarily because in k8s the name
cluster could be confusing given that the config entry applies across
federated datacenters.
Additionally, this config entry will only apply to Consul as a service
mesh, so the more generic "cluster" name is not needed.
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
The zero value of these flags was already being excluded in the xDS
generation of circuit breaker/outlier detection config.
See: makeThresholdsIfNeeded and ToOutlierDetection.
Dhia Ayachi