* add multilimiter and tests
* exporting LimitedEntity
* go mod tidy
* Apply suggestions from code review
Co-authored-by: John Murret <john.murret@hashicorp.com>
* add config update and rename config params
* add doc string and split config
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* use timer to avoid go routine leak and change the interface
* add comments to tests
* fix failing test
* add prefix with config edge, refactor tests
* Apply suggestions from code review
Co-authored-by: Dan Upton <daniel@floppy.co>
* refactor to apply configs for limiters under a prefix
* add fuzz tests and fix bugs found. Refactor reconcile loop to have a simpler logic
* make KeyType an exported type
* split the config and limiter trees to fix race conditions in config update
* rename variables
* fix race in test and remove dead code
* fix reconcile loop to not create a timer on each loop
* add extra benchmark tests and fix tests
* fix benchmark test to pass value to func
* use a separate go routine to write limiters (#15643)
* use a separate go routine to write limiters
* Add updating limiter when another limiter is created
* fix waiter to be a ticker, so we commit more than once.
* fix tests and add tests for coverage
* unexport members and add tests
* make UpdateConfig thread safe and multi call to Run safe
* replace swith with if
* fix review comments
* replace time.sleep with retries
* fix flaky test and remove unnecessary init
* fix test races
* remove unnecessary negative test case
* remove fixed todo
Co-authored-by: John Murret <john.murret@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
* updating to serf v0.10.1 and memberlist v0.5.0 to get memberlist size metrics and memberlist broadcast queue depth metric
* update changelog
* update changelog
* correcting changelog
* adding "QueueCheckInterval" for memberlist to test
* updating integration test containers to grab latest api
Our original intention was for projects to consume and generate their
own Go code for these protobuf packages using Buf. While this is still
the best route for many projects, it causes some headaches when using
a library (e.g. consul-server-connection-manager) that pulls in the
same protobuf package as your project, as Go's protobuf implementation
only allows for a package/namespace to be registered once.
In such cases, projects can depend on this Go module instead, as a
single place where these protobuf packages are registered.
Reported in #12288
The initial test reported was ported and accurately reproduced the issue.
However, since it is a test of an upstream library's internal behavior it won't
be codified in our test suite. Refer to the ticket/PR for details on how to
demonstrate the behavior.
Replace bindata packages with stdlib go:embed.
Modernize some uiserver code with newer interfaces introduced in go 1.16 (mainly working with fs.File instead of http.File.
Remove steps that are no longer used from our build files.
Add Github Action to detect differences in agent/uiserver/dist and verify that the files are correct (by compiling UI assets and comparing contents).
* update raft to v1.3.7
* add changelog
* fix compilation error
* fix HeartbeatTimeout
* fix ElectionTimeout to reload only if value is valid
* fix default values for `ElectionTimeout` and `HeartbeatTimeout`
* fix test defaults
* bump raft to v1.3.8
Fixes#11253
$ go mod why -m github.com/dgrijalva/jwt-go
# github.com/dgrijalva/jwt-go
(main module does not need module github.com/dgrijalva/jwt-go)
$ go mod why -m github.com/form3tech-oss/jwt-go
# github.com/form3tech-oss/jwt-go
github.com/hashicorp/consul/agent
github.com/hashicorp/go-discover
github.com/hashicorp/go-discover/provider/azure
github.com/Azure/go-autorest/autorest
github.com/Azure/go-autorest/autorest/adal
github.com/form3tech-oss/jwt-go
* Fixes a lint warning about t.Errorf not supporting %w
* Enable running autopilot on all servers
On the non-leader servers all they do is update the state and do not attempt any modifications.
* Fix the RPC conn limiting tests
Technically they were relying on racey behavior before. Now they should be reliable.
This adds an aws-iam auth method type which supports authenticating to Consul using AWS IAM identities.
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
Starting from and extending the mechanism introduced in #12110 we can specially handle the 3 main special Consul RPC endpoints that react to many config entries in a single blocking query in Connect:
- `DiscoveryChain.Get`
- `ConfigEntry.ResolveServiceConfig`
- `Intentions.Match`
All of these will internally watch for many config entries, and at least one of those will likely be not found in any given query. Because these are blends of multiple reads the exact solution from #12110 isn't perfectly aligned, but we can tweak the approach slightly and regain the utility of that mechanism.
### No Config Entries Found
In this case, despite looking for many config entries none may be found at all. Unlike #12110 in this scenario we do not return an empty reply to the caller, but instead synthesize a struct from default values to return. This can be handled nearly identically to #12110 with the first 1-2 replies being non-empty payloads followed by the standard spurious wakeup suppression mechanism from #12110.
### No Change Since Last Wakeup
Once a blocking query loop on the server has completed and slept at least once, there is a further optimization we can make here to detect if any of the config entries that were present at specific versions for the prior execution of the loop are identical for the loop we just woke up for. In that scenario we can return a slightly different internal sentinel error and basically externally handle it similar to #12110.
This would mean that even if 20 discovery chain read RPC handling goroutines wakeup due to the creation of an unrelated config entry, the only ones that will terminate and reply with a blob of data are those that genuinely have new data to report.
### Extra Endpoints
Since this pattern is pretty reusable, other key config-entry-adjacent endpoints used by `agent/proxycfg` also were updated:
- `ConfigEntry.List`
- `Internal.IntentionUpstreams` (tproxy)
* add config watcher to the config package
* add logging to watcher
* add test and refactor to add WatcherEvent.
* add all API calls and fix a bug with recreated files
* add tests for watcher
* remove the unnecessary use of context
* Add debug log and a test for file rename
* use inode to detect if the file is recreated/replaced and only listen to create events.
* tidy ups (#1535)
* tidy ups
* Add tests for inode reconcile
* fix linux vs windows syscall
* fix linux vs windows syscall
* fix windows compile error
* increase timeout
* use ctime ID
* remove remove/creation test as it's a use case that fail in linux
* fix linux/windows to use Ino/CreationTime
* fix the watcher to only overwrite current file id
* fix linter error
* fix remove/create test
* set reconcile loop to 200 Milliseconds
* fix watcher to not trigger event on remove, add more tests
* on a remove event try to add the file back to the watcher and trigger the handler if success
* fix race condition
* fix flaky test
* fix race conditions
* set level to info
* fix when file is removed and get an event for it after
* fix to trigger handler when we get a remove but re-add fail
* fix error message
* add tests for directory watch and fixes
* detect if a file is a symlink and return an error on Add
* rename Watcher to FileWatcher and remove symlink deref
* add fsnotify@v1.5.1
* fix go mod
* fix flaky test
* Apply suggestions from code review
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
* fix a possible stack overflow
* do not reset timer on errors, rename OS specific files
* start the watcher when creating it
* fix data race in tests
* rename New func
* do not call handler when a remove event happen
* events trigger on write and rename
* fix watcher tests
* make handler async
* remove recursive call
* do not produce events for sub directories
* trim "/" at the end of a directory when adding
* add missing test
* fix logging
* add todo
* fix failing test
* fix flaking tests
* fix flaky test
* add logs
* fix log text
* increase timeout
* reconcile when remove
* check reconcile when removed
* fix reconcile move test
* fix logging
* delete invalid file
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* fix review comments
* fix is watched to properly catch a remove
* change test timeout
* fix test and rename id
* fix test to create files with different mod time.
* fix deadlock when stopping watcher
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* fix a deadlock when calling stop while emitting event is blocked
* make sure to close the event channel after the event loop is done
* add go doc
* back date file instead of sleeping
* Apply suggestions from code review
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
* check error
Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com>
Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com>
This commit syncs ENT changes to the OSS repo.
Original commit details in ENT:
```
commit 569d25f7f4578981c3801e6e067295668210f748
Author: FFMMM <FFMMM@users.noreply.github.com>
Date: Thu Feb 10 10:23:33 2022 -0800
Vendor fork net rpc (#1538)
* replace net/rpc w consul-net-rpc/net/rpc
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* replace msgpackrpc and go-msgpack with fork from mono repo
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
* gofmt all files touched
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
```
Signed-off-by: FFMMM <FFMMM@users.noreply.github.com>
Semir Patel