9c069c5031
Removes one more WAN leftover.
2015-10-23 15:23:01 -07:00
edb9a119e2
Does a clean up pass on the Consul side.
2015-10-23 15:23:01 -07:00
ac4185b888
Merges config changes after rebase.
2015-10-23 15:23:01 -07:00
139c9240ea
Address comments
2015-10-23 15:23:01 -07:00
840474f170
Add a test case
2015-10-23 15:23:01 -07:00
23c08aeeb4
Use IndexedCoordinate instead
2015-10-23 15:23:01 -07:00
530e73212a
Some fixes
2015-10-23 15:23:01 -07:00
2ef802b8b3
Fix a comment
2015-10-23 15:23:01 -07:00
b2cff43bb5
Complete logic for sending coordinates
2015-10-23 15:23:01 -07:00
66b210afcb
Some fixes
2015-10-23 15:23:01 -07:00
b5bbe2bcfa
Adding tests and stuff
2015-10-23 15:23:01 -07:00
d035dbd43b
Merge pull request #1318 from daveadams/f-http-header-token
...
Allow specifying Consul token in an HTTP request header
2015-10-22 13:33:47 -07:00
9267f956a2
Update cleanhttp repo location
2015-10-22 14:14:22 -04:00
06bb9d5f36
Use cleanhttp to get rid of DefaultTransport
2015-10-22 10:47:50 -04:00
5f175add40
Add HTTP request header X-Consul-Token
...
Add support for an X-Consul-Token HTTP request header to specify the
token with which this request should be fulfilled. The header would have
precedence over the responding Agent's default token, but would have
lower precedence than a token specified in the query string.
2015-10-19 11:26:01 -05:00
263c7e3fd3
Deletes the old state store and all its accoutrements.
2015-10-15 14:59:09 -07:00
bcdabe4606
Knocks out the Raft indexes before doing compare.
2015-10-15 14:59:09 -07:00
cbcd977a39
Gets new structs changes to compile, adds some corner case handling and extra unit tests.
2015-10-15 14:59:09 -07:00
b46f878747
Merge pull request #1309 from hashicorp/f-remove-migrate
...
Removes consul-migrate for 0.6
2015-10-15 14:50:19 -07:00
9cddc187b5
Don't use http.DefaultClient
...
Two of the changes are in tests; the one of consequence is in the API.
As explained in #1308 this can cause conflicts with downstream programs.
Fixes #1308 .
2015-10-15 17:49:35 -04:00
aba1b26015
agent: consolidates data dir checker
2015-10-15 14:21:35 -07:00
8bc51eb237
agent: test mdb dir protection
2015-10-15 14:15:41 -07:00
2a7609d6bc
agent: remove migrator, refuse to start if mdb dir found
2015-10-15 14:15:08 -07:00
0b77960349
agent: remove an N^2 check. See #1265
2015-10-12 20:30:11 -07:00
a94589ad67
Add http method to log output
2015-10-02 18:33:06 -07:00
26eadcd95c
Merge pull request #1235 from wuub/master
...
fix conflict between handleReload and antiEntropy critical sections
2015-09-17 07:28:39 -07:00
9a1b52171f
panic when unbalanced localState.Resume() is detected
2015-09-17 11:32:08 +02:00
c5168e1263
Fix a bunch of typos.
2015-09-15 13:22:08 +01:00
b25797a808
Merge pull request #1187 from sfncook/enable_tag_drift_03
...
Enable tag drift 03
2015-09-11 15:35:32 -07:00
8d733b7fca
remove various typos
2015-09-11 12:29:54 -07:00
4cd1b09ad7
make Pause()/Resume()/isPaused() behave more like a semaphore
...
see: https://github.com/hashicorp/consul/issues/1173 #1173
Reasoning: somewhere during consul development Pause()/Resume() and
PauseSync()/ResumeSync() were added to protect larger changes to
agent's localState. A few of the places that it tries to protect are:
- (a *Agent) AddService(...) # part of the method
- (c *Command) handleReload(...) # almost the whole method
- (l *localState) antiEntropy(...)# isPaused() prevents syncChanges()
The main problem is, that in the middle of handleReload(...)'s
critical section it indirectly (loadServices()) calls AddService(...).
AddService() in turn calls Pause() to protect itself against
syncChanges(). At the end of AddService() a defered call to Resume() is
made.
With the current implementation, this releases
isPaused() "lock" in the middle of handleReload() allowing antiEntropy
to kick in while configuration reload is still in progress.
Specifically almost all services and probably all check are unloaded
when syncChanges() is allowed to run.
This in turn can causes massive service/check de-/re-registration,
and since checks are by default registered in the critical state,
a majority of services on a node can be marked as failing.
It's made worse with automation, often calling `consul reload` in close
proximity on many nodes in the cluster.
This change basically turns Pause()/Resume() into P()/V() of
a garden-variety semaphore. Allowing Pause() to be called multiple times,
and releasing isPaused() only after all matching/defered Resumes() are
called as well.
TODO/NOTE: as with many semaphore implementations, it might be reasonable
to panic() if l.paused ever becomes negative.
2015-09-11 18:28:06 +02:00
24ac26b3c1
failing test showing that nested Pause()/Resume() release too early
...
see: #1173 / https://github.com/hashicorp/consul/issues/1173
2015-09-11 17:52:57 +02:00
99be758411
Rename EnableTagOverride and update formatting
2015-09-11 08:35:29 -07:00
f448a62826
Remove debug lines
2015-09-11 08:32:59 -07:00
2f04917261
Merge remote-tracking branch 'hashicorp/master' into enable_tag_drift_03
2015-09-10 14:55:30 -07:00
d00889c3a4
Adds missing token to maint unit test.
2015-09-10 14:53:00 -07:00
8a86eee9fb
Add test cases TestAgentAntiEntropy_EnableTagDrift
2015-09-10 14:08:16 -07:00
08d12e978f
Merge pull request #1230 from hashicorp/f-maintfix
...
Respect tokens in maintenance mode
2015-09-10 12:30:07 -07:00
948bd57d6a
agent: testing node/service maintenance using tokens
2015-09-10 12:08:08 -07:00
e129a59316
agent: thread tokens through for maintenance mode
2015-09-10 11:43:59 -07:00
3d7c3725d8
Allow AAAA queries for nodeLookup
2015-09-08 16:54:36 +02:00
d63749b30e
Merge pull request #1217 from 42wim/fix-rfc2308-part3
...
No NXDOMAIN when the answer is empty
2015-09-04 10:42:38 -04:00
56efa4958b
Merge pull request #1214 from zendesk/fix_lock_race_2
...
lock.go: fix another race condition
2015-09-02 16:04:55 -07:00
2336c6a4bd
No NXDOMAIN when the answer is empty
2015-09-02 16:12:22 +02:00
a013095f62
Merge pull request #1167 from railsguru/master
...
Add -http-port option to change the HTTP API port
2015-09-02 01:15:55 -04:00
655666170a
agent: Always enable the UI endpoints
2015-09-01 18:28:32 -07:00
01ec256c7e
lock.go: fix another race condition
...
The previous fix to `consul lock` (commit 6875e8d) didn't completely
eliminate the race that could occur if the lock was acquired around the
same time SIGTERM was received: It was still possible for
Run() to spawn the process via startChild() after killChild() had
released the shared mutex.
Now, when SIGTERM is received, we acquire a mutex that prevents
spawning a new process and never release it.
We've tested this fix pretty thoroughly and believe it completely
resolves the issue.
2015-09-01 14:27:23 -07:00
e97973c1e1
Limit the DNS responses after getting the NodeRecords
2015-09-01 23:23:05 +02:00
56d2fa4c17
Merge pull request #1195 from 42wim/fix-rfc2308-part2
...
Return SOA/NXDOMAIN when the answer is empty
2015-09-01 17:08:31 -04:00
b806aceef4
Return SOA/not found when the answer is empty
2015-09-01 22:28:12 +02:00
0f49e1c3a9
Merge pull request #1200 from ryotarai/lock-pass-stdin
...
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-31 21:14:45 -07:00
d6b71de3f4
agent: reload SCADA client if endpoint changes
2015-08-27 13:29:07 -07:00
5bd7a5f239
command: atlas endpoint can be passed
2015-08-27 11:11:05 -07:00
cda2bf6975
agent: atlas_endpoint is configurable
2015-08-27 11:08:01 -07:00
c45f2971e7
command/lock: Pass stdin to child process when -pass-stdin passed.
2015-08-26 16:27:21 +09:00
00d78963bf
agent: log a message when making a new scada connection
2015-08-25 21:03:16 -07:00
33cadcf925
agent: don't reload scada client if there is no config change
2015-08-25 20:43:57 -07:00
8eea77d58f
agent: testing scada client creation in command
2015-08-25 20:22:22 -07:00
495cc41ba4
agent: test scada HTTP server creation
2015-08-25 18:51:04 -07:00
e3cd2f2c0d
agent: clean up scada connection manager
2015-08-25 18:27:07 -07:00
bc96c14a6f
agent: document the scada http creation func
2015-08-25 17:19:11 -07:00
1378fd93b0
agent: scada client and HTTP server are tracked separately
2015-08-25 16:59:53 -07:00
325b54649a
Remove duplicate code
2015-08-20 20:46:20 +02:00
3d133ab78c
Use Ports.HTTP directly
2015-08-20 20:27:20 +02:00
7e2ecf6a3c
Add documentation for http-port option
2015-08-20 20:19:35 +02:00
d4ec6aa630
Update tests - NodeService init needs bool
2015-08-20 09:09:26 -07:00
854ff1eb41
Add EnableTagDrift logic to command/agent/local.go
2015-08-18 14:03:48 -07:00
3a740ac07b
Remove from command/agent/config_test.go
2015-08-18 10:42:25 -07:00
f6814c89ed
EnableTagDrift in NodeService struct
2015-08-18 10:34:55 -07:00
5024e7c3c7
Merge pull request #1166 from hashicorp/f-dns-log
...
Log network address of DNS clients
2015-08-13 18:32:32 -07:00
07299a61dc
agent: log network address of DNS clients
2015-08-11 10:33:27 -07:00
7a3da7db26
Add -http-port option to change the HTTP API port
...
This is useful when pushing consul to PaaS like
Cloud Foundry making the HTTP API easily routable.
2015-08-11 14:14:21 +02:00
c2a865686c
Merge pull request #1158 from mfischer-zd/fix_1155
...
lock.go: fix race condition
2015-08-05 14:56:13 -07:00
9e0e9e389d
lock.go: fix race condition
...
Fix a race condition between startChild() and killChild() that could
lead to an orphaned managed process.
Fixes #1155
2015-08-05 09:06:51 -07:00
f95ba4b8eb
Remove trailing slash from lock
...
Lock command will remove trailing slash from path (as it is invalid).
Fixes #1136 .
2015-07-30 12:14:17 -05:00
b13ba78651
Merge pull request #1143 from hashicorp/GH-1142
...
Check NXDOMAIN after filtering nodes
2015-07-29 18:56:08 -04:00
20f17a0cc8
Test for GH-1142.
2015-07-29 18:21:16 -04:00
0a853bca2e
Merge pull request #1137 from 42wim/fix-1124
...
Recurse when PTR answer is empty
2015-07-29 14:39:04 -07:00
dbb5ad1316
Check NXDOMAIN after filtering nodes
...
Move the check for NXDOMAIN below the service health filter.
2015-07-29 17:16:48 -04:00
6e38497ce9
Merge pull request #1141 from hashicorp/f-travis
...
Try moving to newer Travis-CI infrastructure
2015-07-28 10:42:56 -07:00
f48bc65e62
travis-ci: skip syslog tests for container-based travis infra
2015-07-28 09:58:43 -07:00
a6734ab4b8
Recurse when PTR answer is empty
2015-07-27 23:22:36 +02:00
2017c95d13
Merge pull request #1130 from pdf/check_socket
...
Add Socket check type
2015-07-27 14:21:24 -07:00
6d38027689
Merge pull request #1090 from hashicorp/f-keyring-acl
...
Keyring ACLs
2015-07-24 10:23:18 -07:00
86edd7169c
Add TCP check type
...
Adds the ability to simply check whether a TCP socket accepts
connections to determine if it is healthy. This is a light-weight -
though less comprehensive than scripting - method of checking network
service health.
The check parameter `tcp` should be set to the `address:port`
combination for the service to be tested. Supports both IPv6 and IPv4,
in the case of a hostname that resolves to both, connections will be
attempted via both protocol versions, with the first successful
connection returning a successful check result.
Example check:
```json
{
"check": {
"id": "ssh",
"name": "SSH (TCP)",
"tcp": "example.com:22",
"interval": "10s"
}
}
```
2015-07-24 14:06:05 +10:00
a339ca19a6
agent: disable ACLs for RPC client tests
2015-07-23 17:09:33 -07:00
6f42f6640c
command/lock: Check for shutdown during lock acquisition. Fixes #800
2015-07-22 16:07:44 -07:00
eece6e4848
Return every time lock acquisition fails
2015-07-22 10:44:47 -07:00
f424f94d45
agent: vet fixes
2015-07-14 11:42:51 -07:00
8e834ba976
Merge pull request #995 from 42wim/rfc2308-soa-ttl
...
Send SOA with negative responses (RFC2308)
2015-07-13 08:49:25 -07:00
0a09b11cba
agent: testing keyring ACLs
2015-07-07 15:14:06 -06:00
e764eb62bd
agent: write-level keyring ACLs work
2015-07-07 10:36:51 -06:00
665551a182
agent: read-level keyring ACLs work
2015-07-07 10:30:34 -06:00
503fa1eed1
Merge pull request #1046 from hashicorp/f-event-acl
...
Event ACLs
2015-07-02 07:02:07 -07:00
715f69cce8
Merge pull request #1004 from i0rek/advertise_addrs
...
Add advertise_addrs.
2015-06-23 12:32:07 -07:00
4598087df3
Implement advertise_addrs for SerfLan, SerfWan and RPC.
...
Fixes #550 .
This will make it possible to configure the advertised adresses for
SerfLan, SerfWan and RPC. It will enable multiple consul clients on a
single host which is very useful in a container environment.
This option might override advertise_addr and advertise_addr_wan
depending on the configuration.
It will be configureable with advertise_addrs. Example:
{
"advertise_addrs": {
"serf_lan": "10.0.120.91:4424",
"serf_wan": "201.20.10.61:4423",
"rpc": "10.20.10.61:4424"
}
}
2015-06-23 21:23:45 +02:00
5866588d68
command: remote exec takes -token parameter
2015-06-22 17:16:28 -07:00
1f68b5268b
command: event command supports -token arg
2015-06-22 16:59:41 -07:00
5c9cf8cc69
agent: avoid masking errors when ACLs deny a request
2015-06-18 18:13:29 -07:00
4a95f29e03
agent: testing user event endpoint ACLs
2015-06-18 18:13:29 -07:00
e6923a4832
consul: always fire events from server nodes
2015-06-18 18:13:29 -07:00
713f1781c8
agent: enforce event policy during event fire
2015-06-18 18:13:29 -07:00
e70e57a0dc
Send SOA with negative responses
2015-06-14 00:03:44 +02:00
b7674a2d35
Merge pull request #1028 from sebastianmarkow/master
...
Remove unreachable error handling in AgentRPC.listen()
2015-06-12 22:28:10 -07:00
b2556bd4d0
agent: testing dns when acls are in use
2015-06-12 16:01:57 -07:00
48cb636e8d
agent: dns uses the configured token during queries
2015-06-12 16:01:57 -07:00
34611c8599
consul: Remove unreachable error handling
2015-06-12 20:21:32 +02:00
47073c87c1
agent: don't replace empty tokens in the logs, fixes #1020
2015-06-12 00:11:37 -07:00
b5fff74c8a
agent: fix failing test
2015-06-11 15:13:10 -07:00
e4f937f71d
agent: use persist/load/purge convention for function names
2015-06-08 09:35:10 -07:00
08a12ffd5b
agent: test check state restoration from AddCheck
2015-06-05 17:33:34 -07:00
bd448d27fe
agent: check state is purged if expired
2015-06-05 16:59:41 -07:00
7d8993e0f0
agent: purge check state when checks are deregistered
2015-06-05 16:57:14 -07:00
8c9facbff0
agent: testing state persistence, recovery, and expiration
2015-06-05 16:45:05 -07:00
f1eb739949
agent: first stab at persisting check state
2015-06-05 16:17:07 -07:00
7e82b3c32c
agent: refactor loadChecks/loadServices, fixes a few minor bugs
2015-06-04 14:33:30 -07:00
359abdb9a8
agent: don't replace config on SIGHUP if parsing fails
2015-05-30 22:50:24 -07:00
c746d218f4
command/agent: skip unix file permissions test on windows
2015-05-29 21:12:45 +02:00
263fae2292
Sort members in by name for consul members
2015-05-22 10:37:54 +02:00
bec5ce6af9
Sort tags in consul members -detailed output
2015-05-22 10:27:47 +02:00
b5cd115795
agent: flush progress info to console during migrations
2015-05-19 18:47:44 -07:00
74dd2270af
Set the User Agent for HTTP health checks
2015-05-18 19:12:10 +02:00
450f66fd3c
Include DC in the members command output
2015-05-15 23:26:34 +02:00
704f6343c3
agent: log a message when data migrations start
2015-05-12 12:58:44 -07:00
3ce3c663ad
Fix tests after merge
2015-05-11 18:53:09 -07:00
430100a0c8
Merge pull request #927 from hashicorp/f-tls
...
Add new `verify_server_hostname` to mitigate possibility of MITM
2015-05-11 18:15:16 -07:00
f797130228
Fixing merge conflict
2015-05-11 16:48:10 -07:00
1952083354
agent: copy config into consul config
2015-05-11 15:16:13 -07:00
c8fb9ab369
agent: Adding new VerifyHostname config
2015-05-11 15:13:58 -07:00
0b9bc7d2f5
Adding documentation about specifying multiple configuration directories
2015-05-11 10:19:04 -07:00
d4f805e800
command: fix configtest help format
2015-05-11 09:42:26 -07:00
27a4dc868c
Merge pull request #904 from josephholsten/configtest-clean
...
add minimal configtest command
2015-05-11 09:01:54 -07:00
ae3e8d24c4
command/configtest: add
2015-05-08 13:09:50 -07:00
d0a28482ff
agent: use service ID field to determine associated health checks during deregister
2015-05-07 15:30:01 -07:00
e7b00723f4
agent: restore check status when re-registering (updating) services
2015-05-06 12:28:42 -07:00
e474e34528
Merge pull request #909 from hashicorp/f-create
...
Support ACL upsert behavior
2015-05-06 11:22:11 -07:00
ed067fd03c
agent: allow persisted services to be updated on disk
2015-05-05 22:36:45 -07:00
9acc42b86e
Merge pull request #891 from hashicorp/f-token
...
ACL tokens for service/check registration
2015-05-05 22:17:31 -07:00
b0fb010c2d
agent: Support ACL upserting
2015-05-05 19:25:10 -07:00
c457b6cb75
agent: Adding test for DNS enable_truncate
2015-05-05 14:14:41 -07:00
0e9718247d
command/agent: Lowercase DC. Fixes #761
2015-05-05 13:56:37 -07:00
3c577a0069
agent: use an additional parameter for passing tokens
2015-05-04 17:48:05 -07:00
efaed93b91
Merge pull request #816 from pepov/master
...
Support different advertise address for WAN gossip
2015-05-04 15:40:25 -07:00
bcaca06650
Merge pull request #902 from hashicorp/f-stats-prefix
...
Allow configuring the stats prefix
2015-05-04 15:19:47 -07:00
9498aa9a78
Merge pull request #862 from hashicorp/f-recurse-cname
...
Return all CNAME's during service DNS resolution
2015-05-04 15:19:13 -07:00
94f0834d8f
agent: allow configuring the stats prefix
2015-05-03 16:46:20 -07:00
2496a70452
agent: more tests
2015-04-28 13:06:02 -07:00
67e9a04f48
agent: restore tokens for services and checks in config
2015-04-28 12:44:46 -07:00
802b4793df
agent: backwards compat for persisted services from pre-0.5.1
2015-04-28 12:18:41 -07:00
f069db21e3
agent: safer read methods for tokens
2015-04-28 11:53:53 -07:00
54b5f17629
agent: test coverage loading service/check tokens from persisted files
2015-04-27 22:46:01 -07:00
23eab5ebcc
agent: fix deadlock reading tokens from state
2015-04-27 22:26:03 -07:00
75d182296f
agent: add service/check token methods to reduce invasiveness
2015-04-27 22:01:01 -07:00
30f6f1142e
agent: persist tokens from API registrations
2015-04-27 19:01:02 -07:00
545f3db3fe
agent: initial pass threading through tokens for services/checks
2015-04-27 18:33:46 -07:00
68cb8fda58
remove config
2015-04-24 09:51:40 -05:00
88bfdd45ef
use existing randomStagger
2015-04-23 17:08:17 -05:00
1ebc1cf916
add CheckUpdateStagger to MergeConfig
2015-04-23 16:56:20 -05:00
1e13acba68
adding check_update_stagger
2015-04-23 16:27:42 -05:00
cd65aaa2e0
agent: re-work DNS tests to not rely on the external network
2015-04-14 12:52:26 -07:00
ed4de526f1
agent: pass through CNAME types for service resolution
2015-04-14 12:52:26 -07:00
05194033f8
agent: Add test for CNAME recursion
2015-04-14 12:52:26 -07:00
34fc9a37fd
agent: parse raw query URL to avoid closing the request body early
2015-04-13 17:31:53 -07:00
adbc5c92c6
agent: hide tokens from logs and monitor
2015-04-12 11:17:31 -07:00
370853d7ff
Allow specifying a status field in the agent/service/register and agent/check/register endpoints.
...
This status must be one of the valid check statuses: 'passing', 'warning', 'critical', 'unknown'.
If the status field is not present or the empty string, the default of 'critical' is used.
2015-04-12 02:00:31 +00:00
1fad389f23
agent: Don't attempt migration on new server
2015-04-10 19:41:09 -07:00
8ebee678cc
Merge pull request #857 from hashicorp/f-boltdb
...
Raft uses BoltDB
2015-04-10 18:30:07 -07:00
8af963348c
agent: handle nil node services in anti-entropy
2015-04-10 11:15:31 -07:00
4f4f5fa7d5
command: automatically migrate raft data on start
2015-04-09 23:00:20 -07:00
c3820b4c28
agent: fix anti-entropy check sync
2015-04-09 10:40:05 -07:00
a49fe8931a
agent: test anti-entropy sync
2015-04-08 12:36:53 -07:00
80a6d7caca
agent: anti-entropy sync services/checks if they don't exist in the catalog
2015-04-08 12:21:01 -07:00
4d950f91cb
agent: fix dns test
2015-04-01 10:58:05 -07:00
755522fa48
Remove unnecessary DNS test entry
...
By using the startup callbacks, the DNS test entry is not needed to check that
the server is alive.
2015-03-31 16:50:44 -07:00
f5d27daf63
Use DNS server startup callbacks
...
Simplify waiting for the DNS server to start with the newer "NotifyStartedFunc"
callback.
2015-03-31 16:48:48 -07:00
8da6d4f065
add and test -advertise-wan cli flag
2015-03-28 16:08:19 +01:00
0a04003e16
add AdvertiseAddrWan to TestMergeConfig and use different values for Addr values in b than in a
2015-03-28 16:08:19 +01:00
e66301ab99
Add configuration option to specify a separate address for advertising on the wan
2015-03-28 16:08:19 +01:00
c00c4ebaaa
Support SesionTTLMin configuration
...
- Allow setting SessionTTLMin
- Validate on the Server
2015-03-27 05:13:57 -07:00
78cde71a22
Add -domain command line flag to agent
...
This makes it possible to configure the domain on the command line
additionally to the config file.
2015-03-20 16:05:41 +01:00
589a4cc4c7
agent: disable HTTP keepalives for checks
2015-03-15 13:30:50 -07:00
66d89ab4df
agent: warn and purge checks which cannot be restored from agent state
2015-03-11 16:13:31 -07:00
9441b46116
Merge pull request #723 from hashicorp/f-agent-block
...
Block until service/check sync is attempted from /v1/agent API's
2015-02-23 10:56:41 -08:00
f7d1397bba
command: clarify -recursor agent arg
2015-02-23 09:33:45 -08:00
fec46d0559
Support multiple recursor flag
2015-02-21 10:15:52 +03:30
4f4b4b0f3e
agent: write API's on /v1/agent block for anti-entropy
2015-02-20 19:43:33 -08:00
92794ded6e
agent: fix test compilation
2015-02-20 18:17:12 -08:00
a9f23a9154
agent: Better warning for keyring with -encrypt option. Fixes #718 .
2015-02-19 18:51:42 -08:00
53afd77e2d
s/data center/datacenter/g
2015-02-19 17:45:47 -05:00
d6e76e5dd4
agent: Cleanup a comment
2015-02-18 16:54:44 -08:00
aadec620ff
agent: Fixing blocking queries on internal endpoints
2015-02-18 15:15:02 -08:00
a446fbd098
agent: Enable UI endpoints for SCADA
2015-02-18 15:15:02 -08:00
760bbd14a5
agent: Do not expose AtlasToken or AtlasACLToken
2015-02-18 15:15:02 -08:00
1738a6b171
agent: Updating for new client API
2015-02-18 15:15:02 -08:00
0c2951c5f9
agent: Test ACL token resolution
2015-02-18 15:12:15 -08:00
8fb86d14ab
agent: Adding SCADA tests
2015-02-18 15:12:15 -08:00
6ee6f67695
agent: Use AtlasACLToken
2015-02-18 15:12:15 -08:00
7ddf87eb54
agent: Rename AtlasCluster to AtlasInfrastructure
2015-02-18 15:12:15 -08:00
269153705b
agent: Fixing setup of SCADA HTTP listener
2015-02-18 15:12:15 -08:00
d9f95e2983
agent: Fixing panic on shutdown
2015-02-18 15:12:15 -08:00
75849d643e
agent: Provide auto-join metadata to SCADA
2015-02-18 15:12:14 -08:00
524bfccc5a
agent: Adding atlas_join configuration
2015-02-18 15:12:14 -08:00
b714144685
agent: SCADA HTTP integration
2015-02-18 15:12:14 -08:00
948f9a0d00
agent: SCADA HTTP listener
2015-02-18 15:12:14 -08:00
08895ce325
agent: Starting SCADA integration
2015-02-18 15:12:14 -08:00
49d11e37f7
agent: Adding Atlas CLI flags
2015-02-18 15:12:14 -08:00
5713006297
agent: Adding new Atlas configs
2015-02-18 15:12:14 -08:00
60f69224ea
agent: Snapshot and restore health state on reload. Fixes #693
2015-02-17 12:00:04 -08:00
ec5ed93c5b
command/exec: Handle a missing key during cancelation. Fixes #626
2015-02-16 14:32:50 -08:00
ed2837d7d5
oops. DefaultTransport being used.
2015-02-12 10:11:22 -06:00
4cbf3a037a
close idle connections after stopping http checks to service
2015-02-11 18:29:51 -06:00
60dd1a073e
agent: clarify the valid characters for dns
2015-02-09 09:59:27 -08:00
5da078f989
agent: warn on service tags with invalid chars
2015-02-09 09:30:06 -08:00
fe80d28664
agent: Warn on dns-incompatible characters during service registration. Fixes #683 .
2015-02-09 09:23:17 -08:00
865e97c340
fixing version numbers RCs should be labeled x.x.x-rcx
...
see conversation with ryanuber: https://github.com/hashicorp/go-checkpoint/issues/2#issuecomment-73199209
2015-02-09 08:17:30 +01:00
d1854d1d91
agent: fix test case examples
2015-02-05 23:29:04 -08:00
e6858f158a
Merge pull request #654 from arnaudbriche/http-check-timeout
...
Configurable CheckHTTP timeout
2015-02-05 23:03:39 -08:00
49a9836be3
- add tests for CheckHTTP with new timeout parameter && CheckType.Timeout parsing
2015-02-02 15:30:44 +07:00
de96094cb0
- add proper parsing of CheckType.Timeout from string
2015-02-02 15:29:42 +07:00
029a6025aa
agent: http checks work inside of service definitions
2015-01-29 12:11:42 -08:00
6ecca376e4
agent: pass locally configured token during remote exec
2015-01-29 10:42:46 -08:00
4d105487a8
- add Timeout field to CheckType and CheckHTTP to make http request timeout configurable by the client
2015-01-29 13:37:48 +07:00
9efda655a1
agent: test service/check deletion with empty ID
2015-01-27 21:47:59 -08:00
6d27dc3548
Merge pull request #644 from foostan/add_validation_of_deregistration
...
Validate ServiceID/CheckID when deregistering.
2015-01-27 21:39:35 -08:00
a75b727391
Validation ServiceID/CheckID when deleting in deleteService() in local.go
2015-01-27 18:11:57 +09:00
99659e9014
Add tests to remove service/check without an ID
2015-01-27 18:10:56 +09:00
524cb0d0c3
Validate ServiceID/CheckID when deregistering.
2015-01-27 01:06:57 +09:00
2a80aacb86
docs: describe child process handling on Windows for lock command
...
Add website documentation for how the lock command handles child
process termination on Windows.
2015-01-25 11:42:29 +01:00
c8224b3f94
command: fix Windows build
...
Add a per GOOS implementation to send signals to PIDs
since syscall.Kill does not exist on Windows.
It will always send a SIGKILL on Windows since there
seems to be no POSIX compatible notion.
Fixes build on Windows.
2015-01-25 05:00:52 +01:00
dd0c9dfbbc
agent/http: fix service registration with nil checks value
2015-01-23 18:50:51 -08:00
068c4137cb
agent/http: clean up socket setup
2015-01-23 17:57:04 -08:00
adb3bd4c5e
agent: make check tests more reliable
2015-01-23 16:07:20 -08:00
26c9d96ccb
agent: error from KVS endpoint if incompatible flags are passed. Fixes #432
2015-01-23 12:48:39 -08:00
15de24c844
agent: more lenient dns response test
2015-01-22 15:31:12 -08:00
e5e519df4b
Merge pull request #625 from hashicorp/f-maintcmd
...
New "maint" command
2015-01-22 11:56:49 -08:00
ae672b32f6
command/maint: better arg conflict checking
2015-01-22 11:20:32 -08:00
17d2443f91
command/maint: clean up
2015-01-22 11:14:28 -08:00
fa19d09390
command/maint: display active maintenance when no args are passed
2015-01-22 10:26:17 -08:00
14d55cb40a
Merge pull request #622 from hashicorp/f-sockets
...
Unix domain sockets
2015-01-21 16:30:03 -08:00
8c1c230ce3
agent: use const for default maintenance reason strings
2015-01-21 14:53:52 -08:00
5cd8800b60
agent: fix test
2015-01-21 14:12:18 -08:00
a51ab988a3
command: more maint command tests
2015-01-21 13:49:10 -08:00
a96cfc9cc3
command: test maint command
2015-01-21 13:37:32 -08:00
718cd94b50
agent: prevent duplicate error messages for maintenance api
2015-01-21 13:28:26 -08:00
8081403ad9
command: maint command works
2015-01-21 13:11:23 -08:00
515ef304e0
command: starting maint command
2015-01-21 13:00:14 -08:00
d65f4035b9
agent: support passing ?reason= for custom notes field values on maintenance checks
2015-01-21 12:21:57 -08:00
40cfd527cb
agent: fix maintenance check ID
2015-01-21 11:03:42 -08:00
b71ffb1fa3
agent: change node maintenance endpoint
2015-01-21 10:57:44 -08:00
a498433078
agent: use strconv.ParseBool for parsing maintenance enable flag
2015-01-21 09:53:31 -08:00
ced676ffc2
agent: comments for new anti-entropy functionality
2015-01-20 21:48:46 -08:00
72e750fb00
agent: simplify anti-entropy of services with multiple checks, add tests
2015-01-20 21:48:46 -08:00
001d2e246d
agent: only send service with check sync if it is out of sync
2015-01-20 21:48:46 -08:00
3b2e9d1b90
agent: refactor syncChecks
2015-01-20 21:48:46 -08:00
684474af1d
agent: support adding multiple checks during service registration from the API
2015-01-20 21:48:45 -08:00
27de0adf3b
agent: support multiple checks per service
2015-01-20 21:48:42 -08:00
9fe1b68f26
agent: use squash mapstructure tag to properly decode embedded structs
2015-01-20 21:10:58 -08:00
c669a17fa6
agent: use interface for file permissions
2015-01-20 18:53:18 -08:00
1e0cd2e499
agent: test permissions are set on rpc socket
2015-01-20 16:57:00 -08:00
88af31507f
agent: fix tests
2015-01-20 16:50:21 -08:00
aa58218dfd
agent: re-add support for user name in socket perms
2015-01-20 16:21:23 -08:00
77c6b86b1e
agent: test Unix domain socket permission settings
2015-01-20 14:32:15 -08:00
73a111b35d
agent: adjusting tests for new behavior of sockets
2015-01-20 14:13:36 -08:00
c01277725a
agent: beginning socket user/group/mode support as discussed in #612
2015-01-20 13:44:27 -08:00
a9819e71a8
Fixing merge conflict
2015-01-20 13:01:13 -08:00
2502398481
command/lock: Fixing mixed spaces and tabs
2015-01-20 12:58:29 -08:00
c6dbb7e76c
command/lock: Adding simple test
2015-01-19 15:47:17 -10:00
b52c14d1b2
command/lock: Calculate name, use provided token
2015-01-19 15:38:00 -10:00
cdfaaac3ac
command/lock: Ensure a conflict between lock and semaphore with shared prefix
2015-01-19 15:26:17 -10:00
1aa8b0fc23
command/lock: First pass at lock
2015-01-19 14:37:48 -10:00
9ee9c5acd5
agent: test agent rpc unix socket create failure
2015-01-19 09:56:59 -08:00
73ad8fcb84
command: address vet report in test
...
Fixes the following vet report:
command/rpc_test.go:61: missing argument for Fatalf(%s): format reads arg 3, have only 2 args
2015-01-17 07:57:11 +01:00
059866cce6
command: fix up env var/cli arg precedence and tests
2015-01-16 17:45:13 -08:00
49127722ec
Merge pull request #610 from dave-tucker/bug/609
...
Don't forget to Shutdown the DNS Server!
2015-01-16 16:46:37 -08:00
f026b8781e
Don't forget to Shutdown the DNS Server!
...
Fixes #609
Signed-off-by: Dave Tucker <dave@dtucker.co.uk>
2015-01-17 00:30:53 +00:00
f29ea9f637
agent: maintenance logging + unique service check IDs
2015-01-16 15:38:13 -08:00
6d284052fc
agent: test node maintenance mode
2015-01-16 15:38:13 -08:00
8ea9eb87ea
agent: node maintenance mode works
2015-01-16 15:38:13 -08:00
3b815cd0aa
agent: maintenance mode api's are idempotent
2015-01-16 15:37:52 -08:00
8a4a8eb023
agent: maintenance mode is persistent
2015-01-16 15:37:52 -08:00
9ceb0f19d8
agent: test http endpoints for maintenance mode
2015-01-16 15:37:51 -08:00
7d4801db29
agent: test agent service maintenance mode
2015-01-16 15:37:51 -08:00
4f4eb204f6
agent: first pass at service maintenance mode
2015-01-16 15:37:51 -08:00
952fac6552
command: fix env var reader for HTTP addr
2015-01-16 14:01:20 -08:00
263614d596
agent: error if binding to existing socket file
2015-01-16 12:39:15 -08:00
328204f535
agent: test socket file overwrite
2015-01-16 10:37:13 -08:00
208b6c0677
command: style fixes for env addr reading
2015-01-16 10:19:04 -08:00
705801ccca
agent: fixing up tests
2015-01-16 09:58:37 -08:00
61d2f71d14
agent: only ignore errors on IsNotExist()
2015-01-16 09:14:52 -08:00
ad19c0afc2
agent: beginning refactor
2015-01-16 00:45:03 -08:00
9bd66c70e5
Ensure a socket is created for permissions adjustment tests and fix some
...
items pointed out in the code review
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-15 14:33:44 +00:00
c3707d3ee5
Add a Unix socket RPC test. I modified some code in the testing library to not make assumptions about the listening socket; all RPC tests still pass. Still to do: Unix socket HTTP test.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
f88536f192
Remove unnecessary ClientListenerAddr function. Rework config test functions to be cleaner. Start of runtime tests.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
4838beec4e
Tests for populateUnixSocket. Still need to write tests for the other major function, and basic socket listening tests.
...
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
400eadd671
RPC and HTTP interfaces fully generically-sockified so Unix is supported.
...
Client works for RPC; will honor CONSUL_RPC_ADDR. HTTP works via consul/api;
honors CONSUL_HTTP_ADDR.
The format of a Unix socket in configuration data is:
"unix://[/path/to/socket];[username or uid];[gid];[mode]"
Obviously, the user must have appropriate permissions to create the socket
file in the given path and assign the requested uid/gid. Also note that Go does
not support gid lookups from group name, so gid must be numeric. See
https://codereview.appspot.com/101310044
When connecting from the client, the format is just the first part of the
above line:
"unix://[/path/to/socket]"
This code is copyright 2014 Akamai Technologies, Inc. <opensource@akamai.com>
2015-01-14 19:31:21 +00:00
f3baa0a113
command/agent: Minor cleanups
2015-01-13 12:18:18 -08:00
d80588f780
Merge pull request #592 from nicholascapo/check-http
...
command/agent: Add simple HTTP check type
2015-01-13 12:11:50 -08:00
1bfe8efbac
Merge pull request #595 from ebroder/dns-only-passing
...
Add "only_passing" option to DNS config
2015-01-13 12:07:22 -08:00
a9ce71e304
Add more thorough testing for only_passing behavior
2015-01-13 14:59:24 +01:00
b631c74ac2
command/agent: Add tests for HTTP Check
2015-01-13 00:09:42 +00:00
793a7b74aa
agent: make dns randomization test more reliable
2015-01-12 16:05:41 -08:00
e116c03f86
command/agent: HTTP Check: Create httpClient in Start()
...
For long (>10s) interval checks the http timeout is 10s, otherwise thetimeout is the interval. This means that a check *should* return
before the next check begins.
2015-01-13 00:01:15 +00:00
27fe823fd2
command/agent: HTTP Check: Include response in check status
2015-01-12 22:35:28 +00:00
f26a79c325
command/agent: Stop HTTP checks when the check is removed
2015-01-12 22:34:39 +00:00
1918f39020
command/agent: HTTP check: Any 2xx is OK, 429 is WARNING
2015-01-12 21:58:57 +00:00
b5e1de165b
Add "only_passing" option to DNS config
...
This excludes nodes from DNS results if their healthchecks are in any
non-passing state, not just if they're critical.
2015-01-10 13:17:11 +01:00
44efa3cca4
agent: fix local_test.go
2015-01-09 16:44:12 -08:00
12cd27e588
agent: wrap deferred anti-entropy sync test in WaitForResult
2015-01-09 16:42:44 -08:00
f2649edcfc
command/agent: Add simple HTTP check type
...
These checks make an `HTTP GET` request every Interval to the specified URL.
The status of the service depends on the HTTP Response Code.
`200` is passing, `503` is warning and anything else is failing.
2015-01-09 16:43:24 -06:00
0b9f4d7153
agent: Testing the KV DELETE with cas
2015-01-08 17:31:32 -08:00
7ec294597e
agent: Support the ?cas parameter to KV DELETE
2015-01-08 17:08:58 -08:00
04d89d8ce2
agent: Testing anti-entropy with service address
2015-01-08 12:02:04 -08:00
3689b82cf4
agent: Adding test for DNS lookup with service address
2015-01-08 11:58:32 -08:00
0164de5f44
agent: Fix de-duplication of SRV with service address
2015-01-08 10:47:41 -08:00
957fa1f5ec
consul: Fixing merge conflict
2015-01-08 10:42:19 -08:00
7d9697dcf3
agent: Testing reverse lookup with custom TLD
2015-01-08 10:24:49 -08:00
3c43e0440f
replaced consul domain with configured domain. Fixes #582
2015-01-08 10:16:05 +00:00
86bcef81b5
agent: test service and check unloading
2015-01-07 22:32:14 -08:00
770bb60af8
agent: consolidate service loading code, better logging
2015-01-07 22:01:43 -08:00
33bd157a61
agent: separate service and check loading/unloading concerns
2015-01-07 22:01:20 -08:00
dea0070a39
agent: persist service/check data using hashed service/check IDs ( fixes #573 )
2015-01-07 19:11:21 -08:00
7ecd015fc0
command: check LastIndex is not zero while waiting for leader
2015-01-07 15:18:00 -08:00
b429c22bfb
command/exec: Use TTL for local and foreign
2015-01-07 14:27:29 -08:00
615b0d6b97
command/exec: Support foreign datacenters
2015-01-07 14:22:40 -08:00
babce89299
Merge pull request #581 from hashicorp/f-consulapi
...
Bring in consulapi
2015-01-07 12:09:44 -08:00
5172b21ee8
api: initial import from armon/consul-api
2015-01-06 10:40:00 -08:00
26d6ae0386
Merge pull request #576 from hashicorp/f-verify-config
...
agent: reject config with invalid options
2015-01-05 14:51:28 -08:00
1889841acd
use the service specific address in SRV response
2015-01-05 22:48:30 +00:00
d9136d3411
agent: use mapstructure's Metadata.Unused to detect extraneous config
2015-01-05 14:41:19 -08:00
25fb18b1cf
agent: reject config with invalid options
2015-01-05 12:30:03 -08:00
1088a5c170
Merge pull request #558 from ceh/http-api-response-headers
...
add ability to specify response headers on the HTTP API
2015-01-05 11:36:08 -08:00
e56b3861dc
advertise specific address for a service
...
Enable setting a specific address in a service definition for advertise. If no specific address is given it will fallback to the node address and reassemble the old behaviour.
2015-01-02 21:10:05 +00:00
59d4f20e62
Test both ?pretty both bare and with value.
2015-01-02 09:15:41 +01:00
8beb1bb848
handle ?pretty similarly to ?stale, ?consistent etc.
2015-01-02 08:00:08 +01:00
92e9e138b9
agent: test pretty printed json
2015-01-01 14:27:10 -08:00
db23a3f0e9
add ability to specify response headers on the HTTP API
...
Add an config object that allows adding HTTP header response fields to every
HTTP API response.
Each specified header is added to every response from all HTTP API endpoints.
Each individual endpoint may overwrite the specified header, which makes sure
that Consul headers such as 'X-Consul-Index' is enforced by the API.
2014-12-28 19:17:08 +01:00
b97a35234d
Clean up log line and reduce test time.
2014-12-18 09:00:51 -05:00
d415219cd5
Test that staggered checks run within the defined interval.
2014-12-17 22:39:11 -05:00
3b77bb7682
Well, that sure is cleaner.
2014-12-17 22:24:41 -05:00
3cb88d0a4f
Add a randomized start before running CheckMonitors.
2014-12-17 21:44:12 -05:00
3823a931c6
Add default rpc address configuration option as CONSUL_RPC_ADDR env variable
...
Similar as in serf: https://github.com/hashicorp/serf/pull/210
2014-12-16 12:18:34 +01:00
9b897d1134
consul: Ignore zero ttl on session
2014-12-12 19:17:04 -08:00
8dbfe7c9a8
Merge pull request #524 from amalaviy/session_ttl
...
Consul Session TTLs
2014-12-12 14:42:25 -08:00
5a76929ba4
Fixed clearSessionTimer, created invalidateSession, added invalid TTL test
2014-12-11 05:34:31 -05:00
7ece29c3e0
Took out usage of snapshot SessionListTTL
2014-12-10 21:37:06 -05:00
e84b26fcf5
Remove hardcoded wait time in session TTL tests
2014-12-10 21:04:09 -05:00
8369b77204
Clean up code based on feedback from armon
2014-12-10 20:49:06 -05:00
c992c18ef0
Added more tests. Also added return of 404 if the session id to renew is not found
2014-12-10 10:02:23 -05:00
b623af776b
Consul Session TTLs
...
The design of the session TTLs is based on the Google Chubby approach
(http://research.google.com/archive/chubby-osdi06.pdf ). The Session
struct has an additional TTL field now. This attaches an implicit
heartbeat based failure detector. Tracking of heartbeats is done by
the current leader and not persisted via the Raft log. The implication
of this is during a leader failover, we do not retain the last
heartbeat times.
Similar to Chubby, the TTL represents a lower-bound. Consul promises
not to terminate a session before the TTL has expired, but is allowed
to extend the expiration past it. This enables us to reset the TTL on
a leader failover. The TTL is also extended when the client does a
heartbeat. Like Chubby, this means a TTL is extended on creation,
heartbeat or failover.
Additionally, because we must account for time requests are in transit
and the relative rates of clocks on the clients and servers, Consul
will take the conservative approach of internally multiplying the TTL
by 2x. This helps to compensate for network latency and clock skew
without violating the contract.
Reference: https://docs.google.com/document/d/1Y5-pahLkUaA7Kz4SBU_mehKiyt9yaaUGcBTMZR7lToY/edit?usp=sharing
2014-12-07 12:38:22 -05:00
154c4e93e4
since dns.TXT is an external dependency, it is safer to add keys to the fields to avoid some potential ordering issues if changes in this field occur with upstream
2014-12-06 13:13:35 +01:00
James Phillips