Commit Graph

18 Commits

Author SHA1 Message Date
John Cowen 913ae5cfb3
ui: Reduce reconnection attempts on disconnection (#8481)
* ui: Reduce reconnection attempts on disconnection

The UI will attempt to reconnect/retry a blocking query to Consul after
a disconnection in certain circumstances.

1. On receipt of a 5xx error (used for keeping blocking queries running
through reverse proxies that have lowertimeouts than consul itself)
2. When a user switches to a different tab and back again)
3. When the connection to Consul is dropped entirely (when Consul itself
has exited)

In the last case the retry attempts where not using a 3 second interval
between attempts like the first case is.

This commit changes the last case to use the same 3 second pause as the
last case.
2020-08-11 18:47:15 +01:00
John Cowen 8cb402eae7
ui: Move routes to use data-sources (#8321)
* Add uri identifiers to all data source things and make them the same

1. Add uri identitifer to data-source service
2. Make <EventSource /> and <DataSource /> as close as possible
3. Add extra `.closed` method to get a list of inactive/closed/closing
data-sources from elsewhere

* Make the connections cleanup the least worst connection when required

* Pass the uri/request id through all the things

* Better user erroring

* Make event sources close on error

* Allow <DataLoader /> data slot to be configurable

* Allow the <DataWriter /> removed state to be configurable

* Don't error if meta is undefined

* Stitch together all the repositories into the data-source/sink

* Use data.source over repositories

* Add missing  <EventSource /> components

* Fix up the views/templates

* Disable all the old route based blocking query things

* We still need the repo for the mixin for the moment

* Don't default to default, default != ''
2020-07-17 14:42:45 +01:00
John Cowen 52705125a1
ui: Remove WithEventSource mixin, use a component instead (#7953)
The WithEventSource mixin was responsible for catching EventSource
errors and cleaning up events sources then the user left a Controller.

As we are trying to avoid mixin usage, we moved this all to an
`EventSource` component, which can clean up when the component is
removed from the page, and also fires an onerror event.

Moving to a component firing an onerror event means we can also remove
all of our custom computed property work that we were using previously
to catch errors (thrown when a service etc. is removed)
2020-06-17 14:19:50 +01:00
John Cowen 1d65f9e41a ui: Model Layer for SSO Support (#7771)
* ui: Adds model layer required for SSO

1. oidc-provider ember-data triplet plus repo, plus addition of torii
addon
2. Make blocking queries support a Cache-Control: no-cache header
3. Tweaks to the token model layer in preparation for SSO work

* Fix up meta related Cache-Control tests

* Add tests adapter tests for URL shapes

* Reset Cache-Control to the original value, return something from logout
2020-05-12 17:14:41 +00:00
John Cowen 0a47a95588 ui: Add DataSource component (#7448)
* ui: Add data-source component and related services (#6486)

* ui: Add data-source component and related services:

1. DataSource component
2. Repository manager for retrieving repositories based on URIs
3. Blocking data service for injection to the data-source component to
support blocking query types of data sources
4. 'Once' promise based data service for injection for potential
fallback to old style promise based data (would need to be injected via
an initial runtime variable)
5. Several utility functions taken from elsewhere
  - maybeCall - a replication of code from elsewhere for condition
  calling a function based on the result of a promise
  - restartWhenAvailable - used for restarting blocking queries when a
  tab is brought to the front
  - ifNotBlocking - to check if blocking is NOT enabled

* Move to a different organization based on protocols

* Don't call open twice when eager

* Workaround new ember error for reading and writing at the same time

* Add first draft of a README.mdx file
2020-05-12 17:14:18 +00:00
Kenia a9898fcf58 ui: Delete the Promise rsvp imports from codebase (#7372) 2020-05-12 17:14:12 +00:00
John Cowen 6ec5c61ca6 ui: Upgrade to ember 3.16 Octane Edition (#7334)
* v3.12.0...v3.16.0

* Upgrades

* Remove old wormhole fix

* Fixup ember power select (camelcasing)

* Fixup immedaitely closing dropdown

When clicking on the syntax selector, it seemed like an extra click
event was firing from the label, which then immediately closed the
dropdown. By adding a for="" attribute this event isn't passed to the
dropdown menu and therefore doesn't immediately close

* Fix up integration tests with new style (plus standardize titles)

* Temporarily disable some template linting rules

* Add required methods (even though they aren't used anywhere)

* Ensure event sources get closed on destruction
2020-05-12 17:14:10 +00:00
John Cowen 1b512badd7
ui: Improve configuration/env/feature flag usage (also add build time year detection) (#7072)
* Add new getEnvironment util/function

* Use new-ish `env` function in all the places

* Clean up ember env file, add year detection from commit date
2020-01-21 17:52:40 +00:00
John Cowen 338812f5c2
ui: UI Release Merge (ui-staging merge) (#6527)
## HTTPAdapter (#5637)

## Ember upgrade 2.18 > 3.12 (#6448)

### Proxies can no longer get away with not calling _super

This means that we can't use create anymore to define dynamic methods.
Therefore we dynamically make 2 extended Proxies on demand, and then
create from those. Therefore we can call _super in the init method of
the extended Proxies.

### We aren't allowed to reset a service anymore

We never actually need to now anyway, this is a remnant of the refactor
from browser based confirmations. We fix it as simply as possible here
but will revisit and remove the old browser confirm functionality at a
later date

### Revert classes to use ES5 style to workaround babel transp. probs

Using a mixture of ES6 classes (and hence super) and arrow functions
means that when babel transpiles the arrow functions down to ES5, a
reference to this is moved before the call to super, hence causing a js
error.

Furthermore, we the testing environment no longer lets use use
apply/call on the constructor.

These errors only manifests during testing (only in the testing
environment), the application itself runs fine with no problems without
this change.

Using ES5 style class definitions give us freedom to do all of the above
without causing any errors, so we reverted these classes back to ES5
class definitions

### Skip test that seems to have changed due to a change in RSVP timing

This test tests a usecase/area of the API that will probably never ever
be used, it was more testing out the API. We've skipped the test for now
as this doesn't affect the application itself, but left a note to come
back here later to investigate further

### Remove enumerableContentDidChange

Initial testing looks like we don't need to call this function anymore,
the function no longer exists

### Rework Changeset.isSaving to take into account new ember APIs

Setting/hanging a computedProperty of an instantiated object no longer
works. Move to setting it on the prototype/class definition instead

### Change how we detect whether something requires listening

New ember API's have changed how you can detect whether something is a
computedProperty or not. It's not immediately clear if its even possible
now. Therefore we change how we detect whether something should be
listened to or not by just looking for presence of `addEventListener`

### Potentially temporary change of ci test scripts to ensure deps exist

All our tooling scripts run through a Makefile (for people familiar with
only using those), which then call yarn scripts which can be called
independently (for people familar with only using yarn).

The Makefile targets always check to make sure all the dependencies are
installed before running anything that requires them (building, testing
etc).

The CI scripts/targets didn't follow this same route and called the yarn
scripts directly (usually CI builds a cache of the dependencies first).

For some reason this cache isn't doing what it usually does, and it
looks as though, in CI, ember isn't installed.

This commit makes the CI scripts consistently use the same method as all
of the other tooling scripts (Makefile target > Install Deps if
required > call yarn script). This should install the dependencies if
for some reason the CI cache building doesn't complete/isn't successful.

Potentially this commit may be reverted if, the root of the problem is
elsewhere, although consistency is always good, so it might be a good
idea to leave this commit as is even if we need to debug and fix things
elsewhere.

### Make test-parallel consistent with the rest of the tooling scripts

As we are here making changes for CI purposes (making test-ci
consistent), we spotted that test-parallel is also inconsistent and also
the README manual instructions won't work without `ember` installed
globally.

This commit makes everything consistent and changes the manual
instructions to use the local ember instance that gets installed via
yarn

### Re-wrangle catchable to fit with new ember 3.12 APIs

In the upgrade from ember 3.8 > 3.12 the public interfaces for
ComputedProperties have changed slightly. `meta` is no longer a public
property of ComputedProperty but of a ComputedDecoratorImpl mixin
instead.

7e4ba1096e/packages/%40ember/-internals/metal/lib/computed.ts (L725)

There seems to be no way, by just using publically available
methods, to replicate this behaviour so that we can create our own
'ComputedProperty` factory via injecting the ComputedProperty class as
we did previously.

3f333bada1/ui-v2/app/utils/computed/factory.js (L1-L18)

Instead we dynamically hang our `Catchable` `catch` method off the
instantiated ComputedProperty. In doing it like this `ComputedProperty`
has already has its `meta` method mixed in so we don't have to manually
mix it in ourselves (which doesn't seem possible)

This functionality is only used during our work in trying to ensure
our EventSource/BlockingQuery work was as 'ember-like' as possible (i.e.
using the traditional Route.model hooks and ember-like Controller
properties). Our ongoing/upcoming work on a componentized approach to
data a.k.a `<DataSource />` means we will be able to remove the majority
of the code involved here now that it seems to be under an amount of
flux in ember.

### Build bindata_assetfs.go with new UI changes
2019-09-30 14:47:49 +01:00
John Cowen cb51f9674d ui: Ensure event sources are closed to the correct state when connecting (#6036)
This fails the tests, but wouldn't produce an actual bug as the source
is still set to closing, just 1 tick later.
2019-09-04 08:35:08 +00:00
John Cowen f7e2bb0712 ui: Small EventSource additions (#5978)
1. EventSources now pass themselves thorugh to the run function as a
second argument. This enables the use of arrow functions along with the
EventSources API
`(configuration, source) => source.close()`. Order of arguments could
potentially be switched at a later date.
2. BlockingEventSources now let you pass an 'event' through at
instantation time. If you do this, the event will immediately be dispatched
once the EventSource is opened. The usecase for this is for 'unfreezing' cached
BlockingEvents. This makes it easier to provide a cache for
BlockingEventSources by caching its data rather than the entire
BlockingEventSource itself.

```
new BlockingEventSource(
  (config, source) => { /* something */ },
  {
    cursor: 1024, // this would also come from a cache
    currentEvent: getFromSomeSortOfCache(eventSourceId) //this is the new bit
  }
);

// more realistically

new BlockingEventSource(
  (config, source) => { return data.findSomething(slug, config) },
  getFromSomeSortOfCache(eventSourceId)
);

```
2019-09-04 08:35:05 +00:00
John Cowen 74dbc71c84 ui: Change vocab of ReopenableEventSource from 'reopen' to 'open' (#5973)
You can potentially close an EventSource before its first tick by
immediately setting the readyState to a non-open state. Therefore it
never opens.

Calling `open` will then open it.

'Open' fits better than 'reopen' when taking the above into account
2019-09-04 08:35:02 +00:00
John Cowen 55f6bac972 ui: Put some options in for event source runners (behind flags) (#5738) 2019-09-04 08:34:59 +00:00
John Cowen 3a14360da4 ui: Ensure an EventSource isn't opened if closed before first tick (#5703)
EventSources will wait for 1 tick before 'opening'. There is always the
chance that the EventSource is '.close()'ed before that tick. We
therefore check the 'readyState' before opening the EventSource
2019-09-04 08:34:59 +00:00
John Cowen 81f209d71e UI: ACL Roles (#5635)
Adds support for ACL Roles and Service Identities CRUD, along with necessary changes to Tokens, and the CSS improvements required.

Also includes refinements/improvements for easier testing of deeply nested components.

1. ember-data adapter/serializer/model triplet for Roles
2. repository, form/validations and searching filter for Roles
3. Moves potentially, repeated, or soon to to repeated functionality
into a mixin (mainly for 'many policy' relationships)
4. A few styling tweaks for little edge cases around roles
5. Router additions, Route, Controller and templates for Roles

Also see: 

* UI: ACL Roles cont. plus Service Identities (#5661 and #5720)
2019-05-01 18:22:37 +00:00
John Cowen 58b73d9966 ui: Increases the pause between blocking queries to 2000ms (#5582)
...also:

Temporarily overwrites native setTimeout and setInterval for e2e/acceptance
testing similar to how XHR is overwritten for e2e/acceptance testing.

This makes the blocking query acceptance tests run faster until we add a
better burstable rate limiter for blocking queries.
2019-05-01 18:22:26 +00:00
John Cowen 45a2fa5a01 UI: Add blocking cursor validation and more straightforward throttle (#5470)
More recommendations for blocking queries clients was added here:

https://github.com/hashicorp/consul/pull/5358

This commit mainly adds cursor/index validation/correction based on
these recommendations (plus tests)

The recommendations also suggest that clients should include rate
limiting. Because of this, we've moved the throttling out of Consul UI
specific code and into Blocking Query specific code. Currently the 'rate
limiting' in this commit only adds a sleep to every iteration of the
loop, which is not the recommended approach, but the code here organizes
the throttling functionality into something we can work with later to
provide something more apt.
2019-05-01 18:22:21 +00:00
John Cowen da36c2a0f9 UI: Add EventSource ready for implementing blocking queries (#5070)
- Maintain http headers as JSON-API meta for all API requests (#4946)
- Add EventSource ready for implementing blocking queries
- EventSource project implementation to enable blocking queries for service and node listings (#5267)
- Add setting to enable/disable blocking queries (#5352)
2019-05-01 18:22:06 +00:00