18926728d4
Supports WAN and LAN Serf Bind Addresses. ( #2468 )
...
* * adding cli config and config file support for specifying the serf wan and lan bind addresses
* updating documentation for serf wan and lan options
Fixes #2007
* Cleans up some small things from #2380 .
* Uses the bind default for the agent test for Serf WAN and LAN.
2016-11-03 12:58:58 -07:00
61311cff80
Test fixes ( #2434 )
...
* Test fixes in health_endpoint_test.go, agent_endpoint_test.go and rtt_test.go
* Don't reuse the same agent config in TestAgent_ReconnectConfigSettings
2016-10-25 13:46:54 -07:00
5df36fbd82
Stops scaling the commit timeout.
2016-08-25 15:05:40 -07:00
b339b0d2fc
Adds performance tuning capability for Raft, detuned defaults, and supplemental docs.
2016-08-24 21:58:37 -07:00
db9a72dde1
Merge branch 'master' into f-deregister-critical
2016-08-16 12:53:21 -07:00
817d7e93e4
Adds an "lan" tagged address so we have a way to get them all.
...
If we didn't have this, then there would be no way to know the LAN
address if address translation was turned on.
2016-08-16 10:49:03 -07:00
b4f981c837
Adds ability to deregister a service based on critical check state longer than a timeout.
2016-08-16 01:00:26 -07:00
8baf0d7a95
Use stable, monotonically increasing port numbers for tests
2016-06-20 14:33:46 -07:00
0857e93d0b
Float a type balloon. Some strings are square pegs in round holes.
...
This experiment was brought about because of variable naming
confusion where name and checkIDs were interchanged. Gave CheckID
an Qualified Type Name and chased downstream changes.
2016-06-07 16:59:02 -04:00
bc6efbae18
Sets an anti-footgun floor for the configurable reap time.
2016-04-20 13:49:51 -07:00
32389a9822
Makes reap time configurable for LAN and WAN.
2016-04-11 00:38:25 -07:00
79bd1fd4bb
Sets up config for more address tags down the road, renames struct members.
2016-02-07 10:37:34 -08:00
a8fd9542dc
Add tests for consul WAN translation
2016-02-06 23:01:45 -08:00
c1305a08ea
Makes the version upshift code look at the correct version field.
2015-10-27 14:44:34 -07:00
aea2194ce3
Makes the default protocol 2 and lets 3 interoperate with 2.
2015-10-23 15:23:01 -07:00
59b710894d
Adds tests for HTTP interface. Removes a stray mark.
2015-10-23 15:23:01 -07:00
948bd57d6a
agent: testing node/service maintenance using tokens
2015-09-10 12:08:08 -07:00
8eea77d58f
agent: testing scada client creation in command
2015-08-25 20:22:22 -07:00
f424f94d45
agent: vet fixes
2015-07-14 11:42:51 -07:00
715f69cce8
Merge pull request #1004 from i0rek/advertise_addrs
...
Add advertise_addrs.
2015-06-23 12:32:07 -07:00
4598087df3
Implement advertise_addrs for SerfLan, SerfWan and RPC.
...
Fixes #550 .
This will make it possible to configure the advertised adresses for
SerfLan, SerfWan and RPC. It will enable multiple consul clients on a
single host which is very useful in a container environment.
This option might override advertise_addr and advertise_addr_wan
depending on the configuration.
It will be configureable with advertise_addrs. Example:
{
"advertise_addrs": {
"serf_lan": "10.0.120.91:4424",
"serf_wan": "201.20.10.61:4423",
"rpc": "10.20.10.61:4424"
}
}
2015-06-23 21:23:45 +02:00
e4f937f71d
agent: use persist/load/purge convention for function names
2015-06-08 09:35:10 -07:00
08a12ffd5b
agent: test check state restoration from AddCheck
2015-06-05 17:33:34 -07:00
bd448d27fe
agent: check state is purged if expired
2015-06-05 16:59:41 -07:00
7d8993e0f0
agent: purge check state when checks are deregistered
2015-06-05 16:57:14 -07:00
8c9facbff0
agent: testing state persistence, recovery, and expiration
2015-06-05 16:45:05 -07:00
3ce3c663ad
Fix tests after merge
2015-05-11 18:53:09 -07:00
f797130228
Fixing merge conflict
2015-05-11 16:48:10 -07:00
d0a28482ff
agent: use service ID field to determine associated health checks during deregister
2015-05-07 15:30:01 -07:00
e7b00723f4
agent: restore check status when re-registering (updating) services
2015-05-06 12:28:42 -07:00
ed067fd03c
agent: allow persisted services to be updated on disk
2015-05-05 22:36:45 -07:00
3c577a0069
agent: use an additional parameter for passing tokens
2015-05-04 17:48:05 -07:00
67e9a04f48
agent: restore tokens for services and checks in config
2015-04-28 12:44:46 -07:00
802b4793df
agent: backwards compat for persisted services from pre-0.5.1
2015-04-28 12:18:41 -07:00
f069db21e3
agent: safer read methods for tokens
2015-04-28 11:53:53 -07:00
54b5f17629
agent: test coverage loading service/check tokens from persisted files
2015-04-27 22:46:01 -07:00
23eab5ebcc
agent: fix deadlock reading tokens from state
2015-04-27 22:26:03 -07:00
75d182296f
agent: add service/check token methods to reduce invasiveness
2015-04-27 22:01:01 -07:00
370853d7ff
Allow specifying a status field in the agent/service/register and agent/check/register endpoints.
...
This status must be one of the valid check statuses: 'passing', 'warning', 'critical', 'unknown'.
If the status field is not present or the empty string, the default of 'critical' is used.
2015-04-12 02:00:31 +00:00
66d89ab4df
agent: warn and purge checks which cannot be restored from agent state
2015-03-11 16:13:31 -07:00
60f69224ea
agent: Snapshot and restore health state on reload. Fixes #693
2015-02-17 12:00:04 -08:00
99659e9014
Add tests to remove service/check without an ID
2015-01-27 18:10:56 +09:00
8c1c230ce3
agent: use const for default maintenance reason strings
2015-01-21 14:53:52 -08:00
d65f4035b9
agent: support passing ?reason= for custom notes field values on maintenance checks
2015-01-21 12:21:57 -08:00
27de0adf3b
agent: support multiple checks per service
2015-01-20 21:48:42 -08:00
f29ea9f637
agent: maintenance logging + unique service check IDs
2015-01-16 15:38:13 -08:00
6d284052fc
agent: test node maintenance mode
2015-01-16 15:38:13 -08:00
8ea9eb87ea
agent: node maintenance mode works
2015-01-16 15:38:13 -08:00
7d4801db29
agent: test agent service maintenance mode
2015-01-16 15:37:51 -08:00
705801ccca
agent: fixing up tests
2015-01-16 09:58:37 -08:00
James Phillips