This allows for client agent to be run in a more stateless manner where they may be abruptly terminated and not expected to come back. If advertising a per-agent reconnect timeout using the advertise_reconnect_timeout configuration when that agent leaves, other agents will wait only that amount of time for the agent to come back before reaping it.
This has the advantageous side effect of causing servers to deregister the node/services/checks for that agent sooner than if the global reconnect_timeout was used.
Extend Consul’s intentions model to allow for request-based access control enforcement for HTTP-like protocols in addition to the existing connection-based enforcement for unspecified protocols (e.g. tcp).
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.
- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.
- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.
- Add a new serf feature flag indicating support for
intentions-as-config-entries.
- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.
- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.
- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.
- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
Fixes#8755
Since I was updating the interface, i also added the missing `GetNamespace()`.
Depending upon how you look at it, this is a breaking change since it adds methods to the exported interface `api.ConfigEntry`. Given that you cannot define your own config entry kinds, and all of the machinery of the `api.Client` acts like a factory to construct the canned ones from the rest of the module, this feels like it's not a problematic change as it would only break someone who had reimplemented the `ConfigEntry` interface themselves for no apparent utility?
Lots of constants were added for various tags that would concern users and are not already parsed out.
Additionally two methods on the AgentMember type were added to ask a member what its ACL Mode is and whether its a server or not.
During gossip encryption key rotation it would be nice to be able to see if all nodes are using the same key. This PR adds another field to the json response from `GET v1/operator/keyring` which lists the primary keys in use per dc. That way an operator can tell when a key was successfully setup as primary key.
Based on https://github.com/hashicorp/serf/pull/611 to add primary key to list keyring output:
```json
[
{
"WAN": true,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 6,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 6
},
"NumNodes": 6
},
{
"WAN": false,
"Datacenter": "dc2",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 8,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
},
{
"WAN": false,
"Datacenter": "dc1",
"Segment": "",
"Keys": {
"0OuM4oC3Os18OblWiBbZUaHA7Hk+tNs/6nhNYtaNduM=": 3,
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"PrimaryKeys": {
"SINm887hKTzmMWeBNKTJReaTLX3mBEJKriDyt88Ad+g=": 8
},
"NumNodes": 8
}
]
```
I intentionally did not change the CLI output because I didn't find a good way of displaying this information. There are a couple of options that we could implement later:
* add a flag to show the primary keys
* add a flag to show json output
Fixes#3393.
Replaces #7559
Running tests in parallel, with background goroutines, results in test output not being associated with the correct test. `go test` does not make any guarantees about output from goroutines being attributed to the correct test case.
Attaching log output from background goroutines also cause data races. If the goroutine outlives the test, it will race with the test being marked done. Previously this was noticed as a panic when logging, but with the race detector enabled it is shown as a data race.
The previous solution did not address the problem of correct test attribution because test output could still be hidden when it was associated with a test that did not fail. You would have to look at all of the log output to find the relevant lines. It also made debugging test failures more difficult because each log line was very long.
This commit attempts a new approach. Instead of printing all the logs, only print when a test fails. This should work well when there are a small number of failures, but may not work well when there are many test failures at the same time. In those cases the failures are unlikely a result of a specific test, and the log output is likely less useful.
All of the logs are printed from the test goroutine, so they should be associated with the correct test.
Also removes some test helpers that were not used, or only had a single caller. Packages which expose many functions with similar names can be difficult to use correctly.
Related:
https://github.com/golang/go/issues/38458 (may be fixed in go1.15)
https://github.com/golang/go/issues/38382#issuecomment-612940030
Fixes#7764
Until now these two fields could only be set through on-disk agent configuration.
This change adds the fields to the agent API struct definition so that they can
be set using the agent HTTP API.
Highlights:
- add new endpoint to query for intentions by exact match
- using this endpoint from the CLI instead of the dump+filter approach
- enforcing that OSS can only read/write intentions with a SourceNS or
DestinationNS field of "default".
- preexisting OSS intentions with now-invalid namespace fields will
delete those intentions on initial election or for wildcard namespaces
an attempt will be made to downgrade them to "default" unless one
exists.
- also allow the '-namespace' CLI arg on all of the intention subcommands
- update lots of docs
And fix the 'value not used' issues.
Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
A Node Identity is very similar to a service identity. Its main targeted use is to allow creating tokens for use by Consul agents that will grant the necessary permissions for all the typical agent operations (node registration, coordinate updates, anti-entropy).
Half of this commit is for golden file based tests of the acl token and role cli output. Another big updates was to refactor many of the tests in agent/consul/acl_endpoint_test.go to use the same style of tests and the same helpers. Besides being less boiler plate in the tests it also uses a common way of starting a test server with ACLs that should operate without any warnings regarding deprecated non-uuid master tokens etc.
In discussion with team, it was pointed out that query parameters tend
to be filter mechanism, and that semantically the "/v1/health/connect"
endpoint should return "all healthy connect-enabled endpoints (e.g.
could be side car proxies or native instances) for this service so I can
connect with mTLS".
That does not fit an ingress gateway, so we remove the query parameter
and add a new endpoint "/v1/health/ingress" that semantically means
"all the healthy ingress gateway instances that I can connect to
to access this connect-enabled service without mTLS"
Found using staticcheck.
binary.Write does not accept int types without a size. The error from binary.Write was ignored, so we never saw this error. Casting the data to uint64 produces a correct hash.
Also deprecate the Default{Addr,Port} fields, and prevent them from being encoded. These fields will always be empty and are not used.
Removing these would break backwards compatibility, so they are left in place for now.
Co-authored-by: Hans Hasselberg <me@hans.io>
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.
In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
R.B. Boyer