Commit Graph

22 Commits

Author SHA1 Message Date
Paul Lesiak d8e6c68ccc bug: Consul lock does not receive signals if lock not acquired (#5909) 2020-01-22 12:44:48 -07:00
Paul Banks e33e41195c
Fix envoy 1.10 exec (#5964)
* Make exec test assert Envoy version - it was not rebuilding before and so often ran against wrong version. This makes 1.10 fail consistenty.

* Switch Envoy exec to use a named pipe rather than FD magic since Envoy 1.10 doesn't support that.

* Refactor to use an internal shim command for piping the bootstrap through.

* Fmt. So sad that vscode golang fails so often these days.

* go mod tidy

* revert go mod tidy changes

* Revert "ignore consul-exec tests until fixed (#5986)"

This reverts commit 683262a6869033cb79e68fa1dba0f9ea83e9187d.

* Review cleanups
2019-06-21 16:06:25 +01:00
Paul Banks 078f4cf5bb Add integration test for central config; fix central config WIP (#5752)
* Add integration test for central config; fix central config WIP

* Add integration test for central config; fix central config WIP

* Set proxy protocol correctly and begin adding upstream support

* Add upstreams to service config cache key and start new notify watcher if they change.

This doesn't update the tests to pass though.

* Fix some merging logic get things working manually with a hack (TODO fix properly)

* Simplification to not allow enabling sidecars centrally - it makes no sense without upstreams anyway

* Test compile again and obvious ones pass. Lots of failures locally not debugged yet but may be flakes. Pushing up to see what CI does

* Fix up service manageer and API test failures

* Remove the enable command since it no longer makes much sense without being able to turn on sidecar proxies centrally

* Remove version.go hack - will make integration test fail until release

* Remove unused code from commands and upstream merge

* Re-bump version to 1.5.0
2019-05-01 16:39:31 -07:00
Matt Keeler ea6cbf01a5 Centralized Config CLI (#5731)
* Add HTTP endpoints for config entry management

* Finish implementing decoding in the HTTP Config entry apply endpoint

* Add CAS operation to the config entry apply endpoint

Also use this for the bootstrapping and move the config entry decoding function into the structs package.

* First pass at the API client for the config entries

* Fixup some of the ConfigEntry APIs

Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well.

Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries.

* Minor API client fixes

* Attempt at some ConfigEntry api client tests

These don’t currently work due to weak typing in JSON

* Get some of the api client tests passing

* Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry

Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing.

* Move MapWalk magic into a binary marshaller instead of JSON.

* Add a MapWalk test

* Get rid of unused func

* Get rid of unused imports

* Fixup some tests now that the decoding from msgpack coerces things into json compat types

* Stub out most of the central config cli

Fully implement the config read command.

* Basic config delete command implementation

* Implement config write command

* Implement config list subcommand

Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output.

* Update command usage

* Update some help usage formatting

* Add the connect enable helper cli command

* Update list command output

* Rename the config entry API client methods.

* Use renamed apis

* Implement config write tests

Stub the others with the noTabs tests.

* Change list output format

Now just simply output 1 line per named config

* Add config read tests

* Add invalid args write test.

* Add config delete tests

* Add config list tests

* Add connect enable tests

* Update some CLI commands to use CAS ops

This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not.

* Fix up the HTTP API CAS tests as I realized they weren’t testing what they should.

* Update config entry rpc tests to properly test CAS

* Fix up a few more tests

* Fix some tests that using ConfigEntries.Apply

* Update config_write_test.go

* Get rid of unused import
2019-04-30 16:27:16 -07:00
R.B. Boyer 5a505c5b3a acl: adding support for kubernetes auth provider login (#5600)
* auth providers
* binding rules
* auth provider for kubernetes
* login/logout
2019-04-26 14:49:25 -05:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
Hans Hasselberg 1a520d65b4
Builtin tls helper (#5078)
* command: add tls subcommand
* website: update docs and guide
2018-12-19 09:22:49 +01:00
Matt Keeler 8fa3d61d25
Implement CLI token cloning & special ID handling (#4827)
* Implement CLI token cloning & special ID handling

* Update a couple CLI commands to take some alternative options.

* Document the CLI.

* Update the policy list and set-agent-token synopsis
2018-10-24 10:24:29 -04:00
Matt Keeler 99e0a124cb
New ACLs (#4791)
This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week.
Description

At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers.

On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though.

    Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though.
    All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management.
    Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are:
        A server running the new system must still support other clients using the legacy system.
        A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system.
        The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode.

So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 12:04:07 -04:00
Jack Pearkes 197d62c6ca New command: consul debug (#4754)
* agent/debug: add package for debugging, host info

* api: add v1/agent/host endpoint

* agent: add v1/agent/host endpoint

* command/debug: implementation of static capture

* command/debug: tests and only configured targets

* agent/debug: add basic test for host metrics

* command/debug: add methods for dynamic data capture

* api: add debug/pprof endpoints

* command/debug: add pprof

* command/debug: timing, wg, logs to disk

* vendor: add gopsutil/disk

* command/debug: add a usage section

* website: add docs for consul debug

* agent/host: require operator:read

* api/host: improve docs and no retry timing

* command/debug: fail on extra arguments

* command/debug: fixup file permissions to 0644

* command/debug: remove server flags

* command/debug: improve clarity of usage section

* api/debug: add Trace for profiling, fix profile

* command/debug: capture profile and trace at the same time

* command/debug: add index document

* command/debug: use "clusters" in place of members

* command/debug: remove address in output

* command/debug: improve comment on metrics sleep

* command/debug: clarify usage

* agent: always register pprof handlers and protect

This will allow us to avoid a restart of a target agent
for profiling by always registering the pprof handlers.

Given this is a potentially sensitive path, it is protected
with an operator:read ACL and enable debug being
set to true on the target agent. enable_debug still requires
a restart.

If ACLs are disabled, enable_debug is sufficient.

* command/debug: use trace.out instead of .prof

More in line with golang docs.

* agent: fix comment wording

* agent: wrap table driven tests in t.run()
2018-10-19 08:41:03 -07:00
Paul Banks 1e4c5a1811 Connect Envoy Command (#4735)
* Plumb xDS server and proxyxfg into the agent startup

* Add `consul connect envoy` command to allow running Envoy as a connect sidecar.

* Add test for help tabs; typos and style fixups from review
2018-10-10 16:55:34 +01:00
Mitchell Hashimoto 1b7f836398
command: register new commands 2018-10-01 09:17:36 -07:00
Paul Banks 3bac52480e Abandon daemonize for simpler solution (preserving history):
Reverts:
  - bdb274852ae469c89092d6050697c0ff97178465
  - 2c689179c4f61c11f0016214c0fc127a0b813bfe
  - d62e25c4a7ab753914b6baccd66f88ffd10949a3
  - c727ffbcc98e3e0bf41e1a7bdd40169bd2d22191
  - 31b4d18933fd0acbe157e28d03ad59c2abf9a1fb
  - 85c3f8df3eabc00f490cd392213c3b928a85aa44
2018-06-25 12:24:10 -07:00
Paul Banks c97db00903 Run daemon processes as a detached child.
This turns out to have a lot more subtelty than we accounted for. The test suite is especially prone to races now we can only poll the child and many extra levels of indirectoin are needed to correctly run daemon process without it becoming a Zombie.

I ran this test suite in a loop with parallel enabled to verify for races (-race doesn't find any as they are logical inter-process ones not actual data races). I made it through ~50 runs before hitting an error due to timing which is much better than before. I want to go back and see if we can do better though. Just getting this up.
2018-06-25 12:24:08 -07:00
Kyle Havlovitz 96f4ff961c
Add CA CLI commands for getting/setting config 2018-06-14 09:42:22 -07:00
Mitchell Hashimoto 50e179c3af
command/intention/match 2018-06-14 09:42:19 -07:00
Mitchell Hashimoto 5ed57b393c
command/intentions/check 2018-06-14 09:42:19 -07:00
Mitchell Hashimoto 4caeaaaa21
command/intentions/delete 2018-06-14 09:42:19 -07:00
Mitchell Hashimoto aead9cd422
command/intention/get: the get command without tests 2018-06-14 09:42:18 -07:00
Mitchell Hashimoto a1a7eaa876
command/intention/create 2018-06-14 09:42:18 -07:00
Paul Banks 800deb693c
Original proxy and connect.Client implementation. Working end to end. 2018-06-14 09:41:56 -07:00
James Phillips 8fb08c7ede
Adds a registry mechanism for CLI commands. 2017-11-29 18:36:52 -08:00