Fix an issue where rpc_hold_timeout was being used as the timeout for non-blocking queries. Users should be able to tune read timeouts without fiddling with rpc_hold_timeout. A new configuration `rpc_read_timeout` is created.
Refactor some implementation from the original PR 11500 to remove the misleading linkage between RPCInfo's timeout (used to retry in case of certain modes of failures) and the client RPC timeouts.
Fixes a `go vet` warning caused by the pragma.DoNotCopy on the protobuf
message type.
Originally I'd hoped we wouldn't need any reflection in the proxycfg hot
path, but it seems proto.Clone is the only supported way to copy a message.
Replaces the reflection-based implementation of proxycfg's
ConfigSnapshot.Clone with code generated by deep-copy.
While load testing server-based xDS (for consul-dataplane) we discovered
this method is extremely expensive. The ConfigSnapshot struct, directly
or indirectly, contains a copy of many of the structs in the agent/structs
package, which creates a large graph for copystructure.Copy to traverse
at runtime, on every proxy reconfiguration.
* feat(ingress gateway: support configuring limits in ingress-gateway config entry
- a new Defaults field with max_connections, max_pending_connections, max_requests
is added to ingress gateway config entry
- new field max_connections, max_pending_connections, max_requests in
individual services to overwrite the value in Default
- added unit test and integration test
- updated doc
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com>
Co-authored-by: Dan Stough <dan.stough@hashicorp.com>
Co-authored-by: Eric Haberkorn <erichaberkorn@gmail.com>
By adding a SpiffeID for server agents, servers can now request a leaf
certificate from the Connect CA.
This new Spiffe ID has a key property: servers are identified by their
datacenter name and trust domain. All servers that share these
attributes will share a ServerURI.
The aim is to use these certificates to verify the server name of ANY
server in a Consul datacenter.
We need to watch for changes to peerings and update the server addresses which get served by the ring buffer.
Also, if there is an active connection for a peer, we are getting up-to-date server addresses from the replication stream and can safely ignore the token's addresses which may be stale.
Previously establishment and pending secrets were only checked at the
RPC layer. However, given that these are Check-and-Set transactions we
should ensure that the given secrets are still valid when persisting a
secret exchange or promotion.
Otherwise it would be possible for concurrent requests to overwrite each
other.
Previously there was a field indicating the operation that triggered a
secrets write. Now there is a message for each operation and it contains
the secret ID being persisted.
Previously the updates to the peering secrets UUID table relied on
inferring what action triggered the update based on a reconciliation
against the existing secrets.
Instead we now explicitly require the operation to be given so that the
inference isn't necessary. This makes the UUID table logic easier to
reason about and fixes some related bugs.
There is also an update so that the peering secrets get handled on
snapshots/restores.
Update generate token endpoint (rpc, http, and api module)
If ServerExternalAddresses are set, it will override any addresses gotten from the "consul" service, and be used in the token instead, and dialed by the dialer. This allows for setting up a load balancer for example, in front of the consul servers.
This mimics xDS's discovery protocol where you must request a resource
explicitly for the exporting side to send those events to you.
As part of this I aligned the overall ResourceURL with the TypeURL that
gets embedded into the encoded protobuf Any construct. The
CheckServiceNodes is now wrapped in a better named "ExportedService"
struct now.
Prior to this the dialing side of the peering would only ever work within the default partition. This commit allows properly parsing the partition field out of the API struct request body, query param and header.
This is the OSS portion of enterprise PR 2242.
This PR introduces a server-local implementation of the proxycfg.ServiceList
interface, backed by streaming events and a local materializer.
We cannot do this for "subscribe" and "partition" this easily without
breakage so those are omitted.
Any protobuf message passed around via an Any construct will have the
fully qualified package name embedded in the protobuf as a string. Also
RPC method dispatch will include the package of the service during
serialization.
- We will be passing pbservice and pbpeering through an Any as part of
peer stream replication.
- We will be exposing two new gRPC services via pbpeering and
pbpeerstream.
- Use some protobuf construction helper methods for brevity.
- Rename a local variable to avoid later shadowing.
- Rename the Nonce field to be more like xDS's naming.
- Be more explicit about which PeerID fields are empty.
Peer replication is intended to be between separate Consul installs and
effectively should be considered "external". This PR moves the peer
stream replication bidirectional RPC endpoint to the external gRPC
server and ensures that things continue to function.
These changes are primarily for Consul's UI, where we want to be more
specific about the state a peering is in.
- The "initial" state was renamed to pending, and no longer applies to
peerings being established from a peering token.
- Upon request to establish a peering from a peering token, peerings
will be set as "establishing". This will help distinguish between the
two roles: the cluster that generates the peering token and the
cluster that establishes the peering.
- When marked for deletion, peering state will be set to "deleting".
This way the UI determines the deletion via the state rather than the
"DeletedAt" field.
Co-authored-by: freddygv <freddy@hashicorp.com>
This is the OSS portion of enterprise PR 2141.
This commit provides a server-local implementation of the `proxycfg.Intentions`
interface that sources data from streaming events.
It adds events for the `service-intentions` config entry type, and then consumes
event streams (via materialized views) for the service's explicit intentions and
any applicable wildcard intentions, merging them into a single list of intentions.
An alternative approach I considered was to consume _all_ intention events (via
`SubjectWildcard`) and filter out the irrelevant ones. This would admittedly
remove some complexity in the `agent/proxycfg-glue` package but at the expense
of considerable overhead from waking potentially many thousands of connect
proxies every time any intention is updated.
This is the OSS portion of enterprise PR 2056.
This commit provides server-local implementations of the proxycfg.ConfigEntry
and proxycfg.ConfigEntryList interfaces, that source data from streaming events.
It makes use of the LocalMaterializer type introduced for peering replication,
adding the necessary support for authorization.
It also adds support for "wildcard" subscriptions (within a topic) to the event
publisher, as this is needed to fetch service-resolvers for all services when
configuring mesh gateways.
Currently, events will be emitted for just the ingress-gateway, service-resolver,
and mesh config entry types, as these are the only entries required by proxycfg
— the events will be emitted on topics named IngressGateway, ServiceResolver,
and MeshConfig topics respectively.
Though these events will only be consumed "locally" for now, they can also be
consumed via the gRPC endpoint (confirmed using grpcurl) so using them from
client agents should be a case of swapping the LocalMaterializer for an
RPCMaterializer.
This is only configured in xDS when a service with an L7 protocol is
exported.
They also load any relevant trust bundles for the peered services to
eventually use for L7 SPIFFE validation during mTLS termination.
1. Fix a bug where the peering leader routine would not track all active
peerings in the "stored" reconciliation map. This could lead to
tearing down streams where the token was generated, since the
ConnectedStreams() method used for reconciliation returns all streams
and not just the ones initiated by this leader routine.
2. Fix a race where stream contexts were being canceled before
termination messages were being processed by a peer.
Previously the leader routine would tear down streams by canceling
their context right after the termination message was sent. This
context cancelation could be propagated to the server side faster
than the termination message. Now there is a change where the
dialing peer uses CloseSend() to signal when no more messages will
be sent. Eventually the server peer will read an EOF after receiving
and processing the preceding termination message.
Using CloseSend() is actually not enough to address the issue
mentioned, since it doesn't wait for the server peer to finish
processing messages. Because of this now the dialing peer also reads
from the stream until an error signals that there are no more
messages. Receiving an EOF from our peer indicates that they
processed the termination message and have no additional work to do.
Given that the stream is being closed, all the messages received by
Recv are discarded. We only check for errors to avoid importing new
data.
When deleting a peering we do not want to delete the peering and all
imported data in a single operation, since deleting a large amount of
data at once could overload Consul.
Instead we defer deletion of peerings so that:
1. When a peering deletion request is received via gRPC the peering is
marked for deletion by setting the DeletedAt field.
2. A leader routine will monitor for peerings that are marked for
deletion and kick off a throttled deletion of all imported resources
before deleting the peering itself.
This commit mostly addresses point #1 by modifying the peering service
to mark peerings for deletion. Another key change is to add a
PeeringListDeleted state store function which can return all peerings
marked for deletion. This function is what will be watched by the
deferred deletion leader routine.
Previously, imported data would never be deleted. As
nodes/services/checks were registered and deregistered, resources
deleted from the exporting cluster would accumulate in the imported
cluster.
This commit makes updates to replication so that whenever an update is
received for a service name we reconcile what was present in the catalog
against what was received.
This handleUpdateService method can handle both updates and deletions.
When converting from Consul intentions to xds RBAC rules, services imported from other peers must encode additional data like partition (from the remote cluster) and trust domain.
This PR updates the PeeringTrustBundle to hold the sending side's local partition as ExportedPartition. It also updates RBAC code to encode SpiffeIDs of imported services with the ExportedPartition and TrustDomain.
Envoy's SPIFFE certificate validation extension allows for us to
validate against different root certificates depending on the trust
domain of the dialing proxy.
If there are any trust bundles from peers in the config snapshot then we
use the SPIFFE validator as the validation context, rather than the
usual TrustedCA.
The injected validation config includes the local root certificates as
well.
There are a handful of changes in this commit:
* When querying trust bundles for a service we need to be able to
specify the namespace of the service.
* The endpoint needs to track the index because the cache watches use
it.
* Extracted bulk of the endpoint's logic to a state store function
so that index tracking could be tested more easily.
* Removed check for service existence, deferring that sort of work to ACL authz
* Added the cache type
For mTLS to work between two proxies in peered clusters with different root CAs,
proxies need to configure their outbound listener to use different root certificates
for validation.
Up until peering was introduced proxies would only ever use one set of root certificates
to validate all mesh traffic, both inbound and outbound. Now an upstream proxy
may have a leaf certificate signed by a CA that's different from the dialing proxy's.
This PR makes changes to proxycfg and xds so that the upstream TLS validation
uses different root certificates depending on which cluster is being dialed.
I noticed that the JSON api endpoints for peerings json encodes protobufs directly, rather than converting them into their `api` package equivalents before marshal/unmarshaling them.
I updated this and used `mog` to do the annoying part in the middle.
Other changes:
- the status enum was converted into the friendlier string form of the enum for readability with tools like `curl`
- some of the `api` library functions were slightly modified to match other similar endpoints in UX (cc: @ndhanushkodi )
- peeringRead returns `nil` if not found
- partitions are NOT inferred from the agent's partition (matching 1.11-style logic)
The importing peer will need to know what SNI and SPIFFE name
corresponds to each exported service. Additionally it will need to know
at a high level the protocol in use (L4/L7) to generate the appropriate
connection pool and local metrics.
For replicated connect synthetic entities we edit the `Connect{}` part
of a `NodeService` to have a new section:
{
"PeerMeta": {
"SNI": [
"web.default.default.owt.external.183150d5-1033-3672-c426-c29205a576b8.consul"
],
"SpiffeID": [
"spiffe://183150d5-1033-3672-c426-c29205a576b8.consul/ns/default/dc/dc1/svc/web"
],
"Protocol": "tcp"
}
}
This data is then replicated and saved as-is at the importing side. Both
SNI and SpiffeID are slices for now until I can be sure we don't need
them for how mesh gateways will ultimately work.
* Install `buf` instead of `protoc`
* Created `buf.yaml` and `buf.gen.yaml` files in the two proto directories to control how `buf` generates/lints proto code.
* Invoke `buf` instead of `protoc`
* Added a `proto-format` make target.
* Committed the reformatted proto files.
* Added a `proto-lint` make target.
* Integrated proto linting with CI
* Fixed tons of proto linter warnings.
* Got rid of deprecated builtin protoc-gen-go grpc plugin usage. Moved to direct usage of protoc-gen-go-grpc.
* Unified all proto directories / go packages around using pb prefixes but ensuring all proto packages do not have the prefix.
Adds a timeout (deadline) to client RPC calls, so that streams will no longer hang indefinitely in unstable network conditions.
Co-authored-by: kisunji <ckim@hashicorp.com>
* mogify needed pbcommon structs
* mogify needed pbconnect structs
* fix compilation errors and make config_translate_test pass
* add missing file
* remove redundant oss func declaration
* fix EnterpriseMeta to copy the right data for enterprise
* rename pbcommon package to pbcommongogo
* regenerate proto and mog files
* add missing mog files
* add pbcommon package
* pbcommon no mog
* fix enterprise meta code generation
* fix enterprise meta code generation (pbcommongogo)
* fix mog generation for gogo
* use `protoc-go-inject-tag` to inject tags
* rename proto package
* pbcommon no mog
* use `protoc-go-inject-tag` to inject tags
* add non gogo proto to make file
* fix proto get
Introduces the capability to configure TLS differently for Consul's
listeners/ports (i.e. HTTPS, gRPC, and the internal multiplexed RPC
port) which is useful in scenarios where you may want the HTTPS or
gRPC interfaces to present a certificate signed by a well-known/public
CA, rather than the certificate used for internal communication which
must have a SAN in the form `server.<dc>.consul`.
Nitya Dhanushkodi