This commit makes two changes to the validation.
Previously we would call this validation in GenerateRoot, which happens
both on initialization (when a follower becomes leader), and when a
configuration is updated. We only want to do this validation during
config update so the logic was moved to the UpdateConfiguration
function.
Previously we would compare the config values against the actual cert.
This caused problems when the cert was created manually in Vault (not
created by Consul). Now we compare the new config against the previous
config. Using a already created CA cert should never error now.
Adding the key bit and types to the config should only error when
the previous values were not the defaults.
These two tests require debug logging enabled, because they look for log lines.
Also switched to testify assertions because the previous errors were not clear.
This test found a bug in the secondary. We were appending the root cert
to the PEM, but that cert was already appended. This was failing
validation in Vault here:
https://github.com/hashicorp/vault/blob/sdk/v0.3.0/sdk/helper/certutil/types.go#L329
Previously this worked because self signed certs have the same
SubjectKeyID and AuthorityKeyID. So having the same self-signed cert
repeated doesn't fail that check.
However with an intermediate that is not self-signed, those values are
different, and so we fail the check. A test I added in a previous commit
should show that this continues to work with self-signed root certs as
well.
This is safer than embedding two interface because there are a number of
places where we check the concrete type. If we check the concrete type
on the top-level interface it will fail. So instead expose the
ACLIdentity from a method.
This change allows us to remove one of the last remaining duplicate
resolve token methods (Server.ResolveToken).
With this change we are down to only 2, where the second one also
handles setting the default EnterpriseMeta from the token.
Now that ACLResolver is embedded we don't need ResolveTokenToIdentity on
Client and Server.
Moving ResolveTokenAndDefaultMeta to ACLResolver removes the duplicate
implementation.
set -euo pipefail
unset CDPATH
cd "$(dirname "$0")"
for f in $(git grep '\brequire := require\.New(' | cut -d':' -f1 | sort -u); do
echo "=== require: $f ==="
sed -i '/require := require.New(t)/d' $f
# require.XXX(blah) but not require.XXX(tblah) or require.XXX(rblah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\([^tr]\)/require.\1(t,\2/g' $f
# require.XXX(tblah) but not require.XXX(t, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/require.\1(t,\2/g' $f
# require.XXX(rblah) but not require.XXX(r, blah)
sed -i 's/\brequire\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/require.\1(t,\2/g' $f
gofmt -s -w $f
done
for f in $(git grep '\bassert := assert\.New(' | cut -d':' -f1 | sort -u); do
echo "=== assert: $f ==="
sed -i '/assert := assert.New(t)/d' $f
# assert.XXX(blah) but not assert.XXX(tblah) or assert.XXX(rblah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\([^tr]\)/assert.\1(t,\2/g' $f
# assert.XXX(tblah) but not assert.XXX(t, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(t[^,]\)/assert.\1(t,\2/g' $f
# assert.XXX(rblah) but not assert.XXX(r, blah)
sed -i 's/\bassert\.\([a-zA-Z0-9_]*\)(\(r[^,]\)/assert.\1(t,\2/g' $f
gofmt -s -w $f
done
Remove some unnecessary comments around query_blocking metric. The only
line that needs any comments in the atomic decrement.
Cleanup the block and return comments and logic. The old comment about
AbandonCh may have been relevant before, but it is expected behaviour
now.
The logic was simplified by inverting the err condition.
This helps keep the logic in blockingQuery more focused. In the future we
may have a separate struct for RPC queries which may allow us to move this
off of Server.
This safeguard should be safe to apply in general. We are already
applying it to non-blocking queries that call blockingQuery, so it
should be fine to apply it to others.
To remove the TODO, and make it more readable.
In general this reduces the scope of variables, making them easier to reason about.
It also introduces more early returns so that we can see the flow from the structure
of the function.
`newIntermediate` is always equal to `needsNewIntermediate`, so we can
remove the extra variable and use the original directly.
Also remove the `activeRoot.ID != newActiveRoot.ID` case from an if,
because that case is already checked above, and `needsNewIntermediate` will
already be true in that case.
This condition now reads a lot better:
> Persist a new root if we did not have one before, or if generated a new intermediate.
In the previous commit the single use of this storedRoot was removed.
In this commit the original objective is completed. The
Provider.ActiveRoot is being removed because
1. the secondary should get the active root from the Consul primary DC,
not the provider, so that secondary DCs do not need to communicate
with a provider instance in a different DC.
2. so that the Provider.ActiveRoot interface can be changed without
impacting other code paths.
This method had only one caller, which always looked for the active
root. This commit moves the lookup into the method to reduce the logic
in the one caller.
This is being done in preparation for a larger change. Keeping this
separate so it is easier to see.
The `storedRootID != primaryRoots.ActiveRootID` is being removed because
these can never be different.
The `storedRootID` comes from `provider.ActiveRoot`, the
`primaryRoots.ActiveRootID` comes from the store `CARoot` from the
primary. In both cases the source of the data is the primary DC.
Technically they could be different if someone modified the provider
outside of Consul, but that would break many things, so is not a
supported flow.
If these were out of sync because of ordering of events then the
secondary will soon receive an update to `primaryRoots` and everything
will be sorted out again.
ActiveRoot should not be called from the secondary DC, because there
should not be a requirement to run the same Vault instance in a
secondary DC. SignIntermediate is called in a secondary DC, so it should
not call ActiveRoot
We would also like to change the interface of ActiveRoot so that we can
support using an intermediate cert as the primary CA in Consul. In
preparation for making that change I am reducing the number of calls to
ActiveRoot, so that there are fewer code paths to modify when the
interface changes.
This change required a change to the mockCAServerDelegate we use in
tests. It was returning the RootCert for SignIntermediate, but that is
not an accurate fake of production. In production this would also be a
separate cert.
Immediately above this line we are already appending the full list of
intermediates. The `provider.ActiveIntermediate` MUST be in this list of
intermediates because it must be available to all the other non-leader
Servers. If it was not in this list of intermediates then any proxy
that received data from a non-leader would have the wrong certs.
This is being removed now because we are planning on changing the
`Provider.ActiveIntermediate` interface, and removing these extra calls ahead of
time helps make that change easier.
Using tracing and cpu profiling I found that the majority of the time in
these test cases is spent generating a private key. We really don't need
separate private keys, so we can generate only one and use it for all
cases.
With this change the test runs much faster.
Fix the name to match the function it is testing
Remove unused code
Fix the signature, instead of returning (error, string) which should be (string, error)
accept a testing.T to emit errors.
Handle the error from encode.
The only function passed to SnapshotRPC today always returns a nil error, so there's no
way to exercise this bug in practice. This change is being made for correctness so that
it doesn't become a problem in the future, if we ever pass a different function to
SnapshotRPC.
Error messages related to service and check operations previously included
the following substrings:
- service %q
- check %q
From this error message, it isn't clear that the expected field is the ID for
the entity, not the name. For example, if the user has a service named test,
the error message would read 'Unknown service "test"'. This is misleading -
a service with that *name* does exist, but not with that *ID*.
The substrings above have been modified to make it clear that ID is needed,
not name:
- service with ID %q
- check with ID %q
Co-authored-by: Chris S. Kim <ckim@hashicorp.com>
Co-authored-by: Dan Upton <daniel@floppy.co>
This query has been incorrectly querying by accessor ID since New ACLs
were added. However, the legacy token compat allowed this to continue to
work, since it made a fallback query for the anonymousToken ID.
PR #11184 removed this legacy token query, which means that the query by
accessor ID is now the only check for the anonymous token's existence.
This PR updates the GetBySecret call to use the secret ID of the token.
Daniel Nephin