Commit Graph

42 Commits

Author SHA1 Message Date
R.B. Boyer baf886c6f3
proxycfg: introduce explicit UpstreamID in lieu of bare string (#12125)
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).

For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
2022-01-20 10:12:04 -06:00
freddygv be85ae11ca additional test fixes 2021-12-13 18:56:44 -07:00
Daniel Upton caa5b5a5a6
xds: prefer fed state gateway definitions if they're fresher (#11522)
Fixes an issue described in #10132, where if two DCs are WAN federated
over mesh gateways, and the gateway in the non-primary DC is terminated
and receives a new IP address (as is commonly the case when running them
on ephemeral compute instances) the primary DC is unable to re-establish
its connection until the agent running on its own gateway is restarted.

This was happening because we always preferred gateways discovered by
the `Internal.ServiceDump` RPC (which would fail because there's no way
to dial the remote DC) over those discovered in the federation state,
which is replicated as long as the primary DC's gateway is reachable.
2021-11-09 16:45:36 +00:00
freddygv 51c888a41a Update locality check in xds 2021-11-01 13:58:53 -06:00
Evan Culver b3c92f22b1
connect: Remove support for Envoy 1.16 (#11354) 2021-10-27 18:51:35 -07:00
R.B. Boyer 97e57aedfb
connect: update supported envoy versions to 1.18.2, 1.17.2, 1.16.3, and 1.15.4 (#10101)
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:

> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.

For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.

Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
2021-04-29 15:22:03 -05:00
R.B. Boyer 91bee6246f
Support Incremental xDS mode (#9855)
This adds support for the Incremental xDS protocol when using xDS v3. This is best reviewed commit-by-commit and will not be squashed when merged.

Union of all commit messages follows to give an overarching summary:

xds: exclusively support incremental xDS when using xDS v3

Attempts to use SoTW via v3 will fail, much like attempts to use incremental via v2 will fail.
Work around a strange older envoy behavior involving empty CDS responses over incremental xDS.
xds: various cleanups and refactors that don't strictly concern the addition of incremental xDS support

Dissolve the connectionInfo struct in favor of per-connection ResourceGenerators instead.
Do a better job of ensuring the xds code uses a well configured logger that accurately describes the connected client.
xds: pull out checkStreamACLs method in advance of a later commit

xds: rewrite SoTW xDS protocol tests to use protobufs rather than hand-rolled json strings

In the test we very lightly reuse some of the more boring protobuf construction helper code that is also technically under test. The important thing of the protocol tests is testing the protocol. The actual inputs and outputs are largely already handled by the xds golden output tests now so these protocol tests don't have to do double-duty.

This also updates the SoTW protocol test to exclusively use xDS v2 which is the only variant of SoTW that will be supported in Consul 1.10.

xds: default xds.Server.AuthCheckFrequency at use-time instead of construction-time
2021-04-29 13:54:05 -05:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
R.B. Boyer 4336d522c1
test: omit envoy golden test files that differ from the latest version (#9807)
Since we currently do no version switching this removes 75% of the PR
noise.

To generate all *.golden files were removed and then I ran:

    go test ./agent/xds -update
2021-02-24 14:04:31 -06:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
Daniel Nephin de226f26e4 xds: Pass in logger
small cleanup in tests
2021-01-07 18:13:48 -05:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
R.B. Boyer 8ea4c482b3
xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424)
Related changes:

- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
2020-07-31 15:52:49 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
R.B. Boyer ba83b52b32
connect: upgrade github.com/envoyproxy/go-control-plane to v0.9.5 (#8165) 2020-06-23 15:19:56 -05:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
freddygv 1e7e716742 Move compound service names to use ServiceName type 2020-06-12 13:47:43 -06:00
Raphaël Rondeau b799471e29
connect: fix endpoints clusterName when using cluster escape hatch (#7319)
```changelog
* fix(connect): fix endpoints clusterName when using cluster escape hatch
```
2020-05-26 10:57:22 +02:00
Kyle Havlovitz e4268c8b7f Support multiple listeners referencing the same service in gateway definitions 2020-05-06 15:06:13 -05:00
freddygv 929491c979 Add subset support 2020-04-27 11:08:40 -06:00
freddygv 2e35a9bb18 Add xds cluster/listener/endpoint management 2020-04-27 11:08:40 -06:00
Chris Piraino af5cc8fd92 Add all the xds ingress tests
This commit copies many of the connect-proxy xds testcases and reuses
for ingress gateways. This allows us to more easily see changes to the
envoy configuration when make updates to ingress gateways.
2020-04-24 09:31:32 -05:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler 154eafe140
xDS Mesh Gateway Resolver Subset Fixes (#7294)
* xDS Mesh Gateway Resolver Subset Fixes

The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied.

The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters.

* Refactor the gateway endpoint generation to be a little easier to read
2020-02-19 11:57:55 -05:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
R.B. Boyer b091647090
agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576)
Fixes #6543

Also improved some of the proxycfg tests to cover snapshot validity
better.
2019-10-17 16:46:49 -05:00
R.B. Boyer d6456fddeb
connect: introduce ExternalSNI field on service-defaults (#6324)
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.

Setting ExternalSNI will disable mesh gateway use for that target. It also 
disables several service-resolver features that do not make sense for an 
external service.
2019-08-19 12:19:44 -05:00
R.B. Boyer 64fc002e03
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer 0165e93517
connect: expose an API endpoint to compile the discovery chain (#6248)
In addition to exposing compilation over the API cleaned up the structures that would be exchanged to be cleaner and easier to support and understand.

Also removed ability to configure the envoy OverprovisioningFactor.
2019-08-02 15:34:54 -05:00
R.B. Boyer 782c647bf4
connect: simplify the compiled discovery chain data structures (#6242)
This should make them better for sending over RPC or the API.

Instead of a chain implemented explicitly like a linked list (nodes
holding pointers to other nodes) instead switch to a flat map of named
nodes with nodes linking other other nodes by name. The shipped
structure is just a map and a string to indicate which key to start
from.

Other changes:

* inline the compiler option InferDefaults as true

* introduce compiled target config to avoid needing to send back
  additional maps of Resolvers; future target-specific compiled state
  can go here

* move compiled MeshGateway out of the Resolver and into the
  TargetConfig where it makes more sense.
2019-08-01 22:44:05 -05:00
R.B. Boyer 4666599e18
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer 2bfad66efa
connect: rework how the service resolver subset OnlyPassing flag works (#6173)
The main change is that we no longer filter service instances by health,
preferring instead to render all results down into EDS endpoints in
envoy and merely label the endpoints as HEALTHY or UNHEALTHY.

When OnlyPassing is set to true we will force consul checks in a
'warning' state to render as UNHEALTHY in envoy.

Fixes #6171
2019-07-23 20:20:24 -05:00
R.B. Boyer 72a8195839
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
Matt Keeler 0a0775b9a6 Fix a bunch of xds flaky tests
The clusters/endpoints test were still relying on deterministic ordering of clusters/endpoints which cannot be relied upon due to golang purposefully not providing any guarantee about consistent interation ordering of maps.

Also fixed a small bug in the connect proxy cluster generation that was causing the clusters slice to be double the size it needed to with the first half being all nil pointers.
2019-07-02 15:53:06 -04:00
Matt Keeler e916f2d954 Implement mesh gateway management of service subsets
Fixup some error handling
2019-07-02 10:29:37 -04:00
R.B. Boyer bccbb2b4ae
activate most discovery chain features in xDS for envoy (#6024) 2019-07-01 22:10:51 -05:00
Matt Keeler 39bb0e3e77 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Paul Banks 737be347eb
Upgrade xDS (go-control-plane) API to support Envoy 1.10. (#5872)
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.

This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.

It also adds integration test support in CI for 1.10.0.

* Fix go vet complaints

* go mod vendor

* Update Envoy version info in docs

* Update website/source/docs/connect/proxies/envoy.md
2019-06-07 07:10:43 -05:00
Paul Banks cf5528734c
Connect: Fix Envoy getting stuck during load (#5499)
* Connect: Fix Envoy getting stuck during load

Also in this PR:
 - Enabled outlier detection on upstreams which will mark instances unhealthy after 5 failures (using Envoy's defaults)
 - Enable weighted load balancing where DNS weights are configured

* Fix empty load assignments in the right place

* Fix import names from review

* Move millisecond parse to a helper function
2019-03-22 19:37:14 +00:00