Commit Graph

96 Commits

Author SHA1 Message Date
Daniel Nephin c66a63275f
Merge pull request #9340 from hashicorp/dnephin/skip-slow-tests-with-short
testing: skip slow tests with -short
2020-12-11 13:33:44 -05:00
R.B. Boyer f9dcaf7f6b
acl: global tokens created by auth methods now correctly replicate to secondary datacenters (#9351)
Previously the tokens would fail to insert into the secondary's state
store because the AuthMethod field of the ACLToken did not point to a
known auth method from the primary.
2020-12-09 15:22:29 -06:00
Daniel Nephin ef0999547a testing: skip slow tests with -short
Add a skip condition to all tests slower than 100ms.

This change was made using `gotestsum tool slowest` with data from the
last 3 CI runs of master.
See https://github.com/gotestyourself/gotestsum#finding-and-skipping-slow-tests

With this change:

```
$ time go test -count=1 -short ./agent
ok      github.com/hashicorp/consul/agent       0.743s

real    0m4.791s

$ time go test -count=1 -short ./agent/consul
ok      github.com/hashicorp/consul/agent/consul        4.229s

real    0m8.769s
```
2020-12-07 13:42:55 -05:00
Kit Patella 7a8844ccce add entries for missing fsm operations and mark duplicated metrics prefixes as deprecated 2020-11-23 12:42:51 -08:00
Kit Patella 0b18f5612e trim help strings to save a few bytes 2020-11-16 11:02:11 -08:00
Kit Patella 374748dafc merge master 2020-11-16 10:46:53 -08:00
Kit Patella af719981f3 finish adding static server metrics 2020-11-13 16:26:08 -08:00
R.B. Boyer e323014faf
server: remove config entry CAS in legacy intention API bridge code (#9151)
Change so line-item intention edits via the API are handled via the state store instead of via CAS operations.

Fixes #9143
2020-11-13 14:42:21 -06:00
Matt Keeler 755fb72994
Switch to using the external autopilot module 2020-11-09 09:22:11 -05:00
Daniel Nephin 44da869ed4 stream: Use a no-op event publisher if streaming is disabled 2020-10-28 13:54:19 -04:00
s-christoff a62705101f
Enhance the output of consul snapshot inspect (#8787) 2020-10-09 14:57:29 -05:00
R.B. Boyer d6dce2332a
connect: intentions are now managed as a new config entry kind "service-intentions" (#8834)
- Upgrade the ConfigEntry.ListAll RPC to be kind-aware so that older
copies of consul will not see new config entries it doesn't understand
replicate down.

- Add shim conversion code so that the old API/CLI method of interacting
with intentions will continue to work so long as none of these are
edited via config entry endpoints. Almost all of the read-only APIs will
continue to function indefinitely.

- Add new APIs that operate on individual intentions without IDs so that
the UI doesn't need to implement CAS operations.

- Add a new serf feature flag indicating support for
intentions-as-config-entries.

- The old line-item intentions way of interacting with the state store
will transparently flip between the legacy memdb table and the config
entry representations so that readers will never see a hiccup during
migration where the results are incomplete. It uses a piece of system
metadata to control the flip.

- The primary datacenter will begin migrating intentions into config
entries on startup once all servers in the datacenter are on a version
of Consul with the intentions-as-config-entries feature flag. When it is
complete the old state store representations will be cleared. We also
record a piece of system metadata indicating this has occurred. We use
this metadata to skip ALL of this code the next time the leader starts
up.

- The secondary datacenters continue to run the old intentions
replicator until all servers in the secondary DC and primary DC support
intentions-as-config-entries (via serf flag). Once this condition it met
the old intentions replicator ceases.

- The secondary datacenters replicate the new config entries as they are
migrated in the primary. When they detect that the primary has zeroed
it's old state store table it waits until all config entries up to that
point are replicated and then zeroes its own copy of the old state store
table. We also record a piece of system metadata indicating this has
occurred. We use this metadata to skip ALL of this code the next time
the leader starts up.
2020-10-06 13:24:05 -05:00
R.B. Boyer a77b518542
server: create new memdb table for storing system metadata (#8703)
This adds a new very tiny memdb table and corresponding raft operation
for updating a very small effective map[string]string collection of
"system metadata". This can persistently record a fact about the Consul
state machine itself.

The first use of this feature will come in a later PR.
2020-10-06 10:08:37 -05:00
Daniel Nephin d192b0a080 stream: move goroutine out of New
This change will make it easier to manage goroutine lifecycle from the caller.

Also expose EventPublisher from state.Store
2020-09-28 18:40:10 -04:00
Chris Piraino 3af96930eb Add new usage memdb table that tracks usage counts of various elements
We update the usage table on Commit() by using the TrackedChanges() API
of memdb.

Track memdb changes on restore so that usage data can be compiled
2020-09-02 10:24:16 -05:00
Kyle Havlovitz 2601585017 fsm: Fix snapshot bug with restoring node/service/check indexes 2020-08-11 11:49:52 -07:00
R.B. Boyer 72a515f5ec
connect: various changes to make namespaces for intentions work more like for other subsystems (#8194)
Highlights:

- add new endpoint to query for intentions by exact match

- using this endpoint from the CLI instead of the dump+filter approach

- enforcing that OSS can only read/write intentions with a SourceNS or
  DestinationNS field of "default".

- preexisting OSS intentions with now-invalid namespace fields will
  delete those intentions on initial election or for wildcard namespaces
  an attempt will be made to downgrade them to "default" unless one
  exists.

- also allow the '-namespace' CLI arg on all of the intention subcommands

- update lots of docs
2020-06-26 16:59:15 -05:00
Daniel Nephin 1ef8279ac9
Merge pull request #8034 from hashicorp/dnephin/add-linter-staticcheck-4
ci: enable SA4006 staticcheck check and add ineffassign
2020-06-17 12:16:02 -04:00
Daniel Nephin 97342de262
Merge pull request #8070 from hashicorp/dnephin/add-gofmt-simplify
ci: Enable gofmt simplify
2020-06-16 17:18:38 -04:00
Daniel Nephin 89d95561df Enable gofmt simplify
Code changes done automatically with 'gofmt -s -w'
2020-06-16 13:21:11 -04:00
Daniel Nephin 5f24171f13 ci: enable SA4006 staticcheck check
And fix the 'value not used' issues.

Many of these are not bugs, but a few are tests not checking errors, and
one appears to be a missed error in non-test code.
2020-06-16 13:10:11 -04:00
Daniel Nephin 78c76f0773 Handle return value from txn.Commit 2020-06-16 13:04:31 -04:00
Paul Banks f9a6386c4a state: track changes so that they may be used to produce change events 2020-06-16 13:04:29 -04:00
Hans Hasselberg bec21c849d
Tokens converted from legacy ACLs get their Hash computed (#8047)
* Fixes #5606: Tokens converted from legacy ACLs get their Hash computed

This allows new style token replication to work for legacy tokens as well when they change.

* tests: fix timestamp comparison

Co-authored-by: Matt Keeler <mjkeeler7@gmail.com>
2020-06-08 21:44:06 +02:00
Daniel Nephin e8a883e829
Replace goe/verify.Values with testify/require.Equal (#7993)
* testing: replace most goe/verify.Values with require.Equal

One difference between these two comparisons is that go/verify considers
nil slices/maps to be equal to empty slices/maps, where as testify/require
does not, and does not appear to provide any way to enable that behaviour.

Because of this difference some expected values were changed from empty
slices to nil slices, and some calls to verify.Values were left.

* Remove github.com/pascaldekloe/goe/verify

Reduce the number of assertion packages we use from 2 to 1
2020-06-02 12:41:25 -04:00
Daniel Nephin ea6c2b2adc ci: Add staticcheck and fix most errors
Three of the checks are temporarily disabled to limit the size of the
diff, and allow us to enable all the other checks in CI.

In a follow up we can fix the issues reported by the other checks one
at a time, and enable them.
2020-05-28 11:59:58 -04:00
R.B. Boyer 54c7f825d6
create lib/stringslice package (#7934) 2020-05-27 11:47:32 -05:00
Chris Piraino a635e23f86
Restoring config entries updates the gateway-services table (#7811)
- Adds a new validateConfigEntryEnterprise function
- Also fixes some state store tests that were failing in enterprise
2020-05-08 13:24:33 -05:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
R.B. Boyer b4325dfbce
agent: ensure that we always use the same settings for msgpack (#7245)
We set RawToString=true so that []uint8 => string when decoding an interface{}.
We set the MapType so that map[interface{}]interface{} decodes to map[string]interface{}.

Add tests to ensure that this doesn't break existing usages.

Fixes #7223
2020-02-07 15:50:24 -06:00
Chris Piraino 3dd0b59793
Allow users to configure either unstructured or JSON logging (#7130)
* hclog Allow users to choose between unstructured and JSON logging
2020-01-28 17:50:41 -06:00
Matt Keeler 485a0a65ea
Updates to Config Entries and Connect for Namespaces (#7116) 2020-01-24 10:04:58 -05:00
Hans Hasselberg 315ba7d6ad
connect: check if intermediate cert needs to be renewed. (#6835)
Currently when using the built-in CA provider for Connect, root certificates are valid for 10 years, however secondary DCs get intermediates that are valid for only 1 year. There is no mechanism currently short of rotating the root in the primary that will cause the secondary DCs to renew their intermediates.
This PR adds a check that renews the cert if it is half way through its validity period.

In order to be able to test these changes, a new configuration option was added: IntermediateCertTTL which is set extremely low in the tests.
2020-01-17 23:27:13 +01:00
R.B. Boyer 20f51f9181 connect: derive connect certificate serial numbers from a memdb index instead of the provider table max index (#7011) 2020-01-09 16:32:19 +01:00
Matt Keeler 442924c35a
Sync of OSS changes to support namespaces (#6909) 2019-12-09 21:26:41 -05:00
Hans Hasselberg a36e58c964
agent: fewer file local differences between enterprise and oss (#6820) (#6898)
* Increase number to test ignore. Consul Enterprise has more flags and since we are trying to reduce the differences between both code bases, we are increasing the number in oss. The semantics don't change, it is just a cosmetic thing.
* Introduce agent.initEnterprise for enterprise related hooks.
* Sync test with ent version.
* Fix import order.
* revert error wording.
2019-12-06 21:35:58 +01:00
Matt Keeler 90ae4a1f1e
OSS KV Modifications to Support Namespaces 2019-11-25 12:57:35 -05:00
Matt Keeler 68d79142c4
OSS Modifications necessary for sessions namespacing 2019-11-25 12:07:04 -05:00
Matt Keeler 1270a93274
Updates to allow for Namespacing ACL resources in Consul Enterp… (#6675)
Main Changes:

• method signature updates everywhere to account for passing around enterprise meta.
• populate the EnterpriseAuthorizerContext for all ACL related authorizations.
• ACL resource listings now operate like the catalog or kv listings in that the returned entries are filtered down to what the token is allowed to see. With Namespaces its no longer all or nothing.
• Modified the acl.Policy parsing to abstract away basic decoding so that enterprise can do it slightly differently. Also updated method signatures so that when parsing a policy it can take extra ent metadata to use during rules validation and policy creation.

Secondary Changes:

• Moved protobuf encoding functions out of the agentpb package to eliminate circular dependencies.
• Added custom JSON unmarshalers for a few ACL resource types (to support snake case and to get rid of mapstructure)
• AuthMethod validator cache is now an interface as these will be cached per-namespace for Consul Enterprise.
• Added checks for policy/role link existence at the RPC API so we don’t push the request through raft to have it fail internally.
• Forward ACL token delete request to the primary datacenter when the secondary DC doesn’t have the token.
• Added a bunch of ACL test helpers for inserting ACL resource test data.
2019-10-24 14:38:09 -04:00
R.B. Boyer 0675e0606e
connect: generate the full SNI names for discovery targets in the compiler rather than in the xds package (#6340) 2019-08-19 13:03:03 -05:00
Mike Morris 88df658243
connect: remove managed proxies (#6220)
* connect: remove managed proxies implementation and all supporting config options and structs

* connect: remove deprecated ProxyDestination

* command: remove CONNECT_PROXY_TOKEN env var

* agent: remove entire proxyprocess proxy manager

* test: remove all managed proxy tests

* test: remove irrelevant managed proxy note from TestService_ServerTLSConfig

* test: update ContentHash to reflect managed proxy removal

* test: remove deprecated ProxyDestination test

* telemetry: remove managed proxy note

* http: remove /v1/agent/connect/proxy endpoint

* ci: remove deprecated test exclusion

* website: update managed proxies deprecation page to note removal

* website: remove managed proxy configuration API docs

* website: remove managed proxy note from built-in proxy config

* website: add note on removing proxy subdirectory of data_dir
2019-08-09 15:19:30 -04:00
Jeff Mitchell e266b038cc Make the chunking test multidimensional (#6212)
This ensures that it's not just a single operation we restores
successfully, but many. It's the same foundation, just with multiple
going on at once.
2019-07-25 11:40:09 +01:00
Jeff Mitchell e0068431f5 Chunking support (#6172)
* Initial chunk support

This uses the go-raft-middleware library to allow for chunked commits to the KV
2019-07-24 17:06:39 -04:00
R.B. Boyer 372bb06c83
acl: a role binding rule for a role that does not exist should be ignored (#5778)
I wrote the docs under this assumption but completely forgot to actually
enforce it.
2019-05-03 14:22:44 -05:00
R.B. Boyer 7d0f729f77
acl: enforce that you cannot persist tokens and roles with missing links except during replication (#5779) 2019-05-02 15:02:21 -05:00
Matt Keeler ea6cbf01a5 Centralized Config CLI (#5731)
* Add HTTP endpoints for config entry management

* Finish implementing decoding in the HTTP Config entry apply endpoint

* Add CAS operation to the config entry apply endpoint

Also use this for the bootstrapping and move the config entry decoding function into the structs package.

* First pass at the API client for the config entries

* Fixup some of the ConfigEntry APIs

Return a singular response object instead of a list for the ConfigEntry.Get RPC. This gets plumbed through the HTTP API as well.

Dont return QueryMeta in the JSON response for the config entry listing HTTP API. Instead just return a list of config entries.

* Minor API client fixes

* Attempt at some ConfigEntry api client tests

These don’t currently work due to weak typing in JSON

* Get some of the api client tests passing

* Implement reflectwalk magic to correct JSON encoding a ProxyConfigEntry

Also added a test for the HTTP endpoint that exposes the problem. However, since the test doesn’t actually do the JSON encode/decode its still failing.

* Move MapWalk magic into a binary marshaller instead of JSON.

* Add a MapWalk test

* Get rid of unused func

* Get rid of unused imports

* Fixup some tests now that the decoding from msgpack coerces things into json compat types

* Stub out most of the central config cli

Fully implement the config read command.

* Basic config delete command implementation

* Implement config write command

* Implement config list subcommand

Not entirely sure about the output here. Its basically the read output indented with a line specifying the kind/name of each type which is also duplicated in the indented output.

* Update command usage

* Update some help usage formatting

* Add the connect enable helper cli command

* Update list command output

* Rename the config entry API client methods.

* Use renamed apis

* Implement config write tests

Stub the others with the noTabs tests.

* Change list output format

Now just simply output 1 line per named config

* Add config read tests

* Add invalid args write test.

* Add config delete tests

* Add config list tests

* Add connect enable tests

* Update some CLI commands to use CAS ops

This also modifies the HTTP API for a write op to return a boolean indicating whether the value was written or not.

* Fix up the HTTP API CAS tests as I realized they weren’t testing what they should.

* Update config entry rpc tests to properly test CAS

* Fix up a few more tests

* Fix some tests that using ConfigEntries.Apply

* Update config_write_test.go

* Get rid of unused import
2019-04-30 16:27:16 -07:00
Kyle Havlovitz 64174f13d6 Add HTTP endpoints for config entry management (#5718) 2019-04-29 18:08:09 -04:00
R.B. Boyer 5a505c5b3a acl: adding support for kubernetes auth provider login (#5600)
* auth providers
* binding rules
* auth provider for kubernetes
* login/logout
2019-04-26 14:49:25 -05:00
R.B. Boyer 9542fdc9bc acl: adding Roles to Tokens (#5514)
Roles are named and can express the same bundle of permissions that can
currently be assigned to a Token (lists of Policies and Service
Identities). The difference with a Role is that it not itself a bearer
token, but just another entity that can be tied to a Token.

This lets an operator potentially curate a set of smaller reusable
Policies and compose them together into reusable Roles, rather than
always exploding that same list of Policies on any Token that needs
similar permissions.

This also refactors the acl replication code to be semi-generic to avoid
3x copypasta.
2019-04-26 14:49:12 -05:00
R.B. Boyer 76321aa952 acl: tokens can be created with an optional expiration time (#5353) 2019-04-26 14:47:51 -05:00