* NET-5530 Support response header modifiers on http-route config entry (#18646)
* Add response header filters to http-route config entry definitions
* Map response header filters from config entry when constructing route destination
* Support response header modifiers at the service level as well
* Update protobuf definitions
* Update existing unit tests
* Add response filters to route consolidation logic
* Make existing unit tests more robust
* Add missing docstring
* Add changelog entry
* Add response filter modifiers to existing integration test
* Add more robust testing for response header modifiers in the discovery chain
* Add more robust testing for request header modifiers in the discovery chain
* Modify test to verify that service filter modifiers take precedence over rule filter modifiers
* Generate deep-copy code
---------
Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com>
Upgrade test: remove outdated test and disable log due to verbosity (#18403)
* remove outdated test
* disable log since we have too many parallel tests
Update submodules to latest following 1.16.0
Align all our internal use of submodules on the latest versions.
Manual backport of 235d9c5ca5bccdad2e853f0ac052e25efdef1ca5.
Bump golang.org/x/net to 0.12.0
While not necessary to directly address CVE-2023-29406 (which should be
handled by using a patched version of Go when building), an
accompanying change to HTTP/2 error handling does impact agent code.
See https://go-review.googlesource.com/c/net/+/506995 for the HTTP/2
change.
Bump this dependency across our submodules as well for the sake of
potential indirect consumers of `x/net/http`.
Manual backport of 84cbf09185ebfc59f9fcf486d1c4983ef129bf95.
## Backport
This PR is auto-generated from #18062 to be assessed for backporting due
to the inclusion of the label backport/1.16.
The below text is copied from the body of the original PR.
---
### Description
<!-- Please describe why you're making this change, in plain English.
-->
- Currently the jwt-auth filter doesn't take into account the service
identity when validating jwt-auth, it only takes into account the path
and jwt provider during validation. This causes issues when multiple
source intentions restrict access to an endpoint with different JWT
providers.
- To fix these issues, rather than use the JWT auth filter for
validation, we use it in metadata mode and allow it to forward the
successful validated JWT token payload to the RBAC filter which will
make the decisions.
This PR ensures requests with and without JWT tokens successfully go
through the jwt-authn filter. The filter however only forwards the data
for successful/valid tokens. On the RBAC filter level, we check the
payload for claims and token issuer + existing rbac rules.
### Testing & Reproduction steps
<!--
* In the case of bugs, describe how to replicate
* If any manual tests were done, document the steps and the conditions
to replicate
* Call out any important/ relevant unit tests, e2e tests or integration
tests you have added or are adding
-->
- This test covers a multi level jwt requirements (requirements at top
level and permissions level). It also assumes you have envoy running,
you have a redis and a sidecar proxy service registered, and have a way
to generate jwks with jwt. I mostly use:
https://www.scottbrady91.com/tools/jwt for this.
- first write your proxy defaults
```
Kind = "proxy-defaults"
name = "global"
config {
protocol = "http"
}
```
- Create two providers
```
Kind = "jwt-provider"
Name = "auth0"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjog....."
}
}
```
```
Kind = "jwt-provider"
Name = "okta"
Issuer = "https://ronald.local"
JSONWebKeySet = {
Local = {
JWKS = "eyJrZXlzIjogW3...."
}
}
```
- add a service intention
```
Kind = "service-intentions"
Name = "redis"
JWT = {
Providers = [
{
Name = "okta"
},
]
}
Sources = [
{
Name = "*"
Permissions = [{
Action = "allow"
HTTP = {
PathPrefix = "/workspace"
}
JWT = {
Providers = [
{
Name = "okta"
VerifyClaims = [
{
Path = ["aud"]
Value = "my_client_app"
},
{
Path = ["sub"]
Value = "5be86359073c434bad2da3932222dabe"
}
]
},
]
}
},
{
Action = "allow"
HTTP = {
PathPrefix = "/"
}
JWT = {
Providers = [
{
Name = "auth0"
},
]
}
}]
}
]
```
- generate 3 jwt tokens: 1 from auth0 jwks, 1 from okta jwks with
different claims than `/workspace` expects and 1 with correct claims
- connect to your envoy (change service and address as needed) to view
logs and potential errors. You can add: `-- --log-level debug` to see
what data is being forwarded
```
consul connect envoy -sidecar-for redis1 -grpc-addr 127.0.0.1:8502
```
- Make the following requests:
```
curl -s -H "Authorization: Bearer $Auth0_TOKEN" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_wrong_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
RBAC filter denied
curl -s -H "Authorization: Bearer $Okta_TOKEN_with_correct_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v
Successful request
```
### TODO
* [x] Update test coverage
* [ ] update integration tests (follow-up PR)
* [x] appropriate backport labels added
---
<details>
<summary> Overview of commits </summary>
- 70536f5a38507d7468f62d00dd93a6968a3d9cf3
</details>
Co-authored-by: Ronald Ekambi <ronekambi@gmail.com>
TLDR with many modules the versions included in each diverged quite a bit. Attempting to use Go Workspaces produces a bunch of errors.
This commit:
1. Fixes envoy-library-references.sh to work again
2. Ensures we are pulling in go-control-plane@v0.11.0 everywhere (previously it was at that version in some modules and others were much older)
3. Remove one usage of golang/protobuf that caused us to have a direct dependency on it.
4. Remove deprecated usage of the Endpoint field in the grpc resolver.Target struct. The current version of grpc (v1.55.0) has removed that field and recommended replacement with URL.Opaque and calls to the Endpoint() func when needing to consume the previous field.
4. `go work init <all the paths to go.mod files>` && `go work sync`. This syncrhonized versions of dependencies from the main workspace/root module to all submodules
5. Updated .gitignore to ignore the go.work and go.work.sum files. This seems to be standard practice at the moment.
6. Update doc comments in protoc-gen-consul-rate-limit to be go fmt compatible
7. Upgraded makefile infra to perform linting, testing and go mod tidy on all modules in a flexible manner.
8. Updated linter rules to prevent usage of golang/protobuf
9. Updated a leader peering test to account for an extra colon in a grpc error message.
* upgrade test: add targetimage name as parameter to upgrade function
- the image name of latest version and target version could be
different. Add the parameter of targetImage to the upgrade
function
* fix a bug of expected error
* TProxy integration test
* Fix GHA compatibility integration test command
Previously, when test splitting allocated multiple test directories to a
runner, the workflow ran `go tests "./test/dir1 ./test/dir2"` which
results in a directory not found error. This fixes that.
* Fix straggler from renaming Register->RegisterTypes
* somehow a lint failure got through previously
* Fix lint-consul-retry errors
* adding in fix for success jobs getting skipped. (#17132)
* Temporarily disable inmem backend conformance test to get green pipeline
* Another test needs disabling
---------
Co-authored-by: John Murret <john.murret@hashicorp.com>
* normalize status conditions for gateways and routes
* Added tests for checking condition status and panic conditions for
validating combinations, added dummy code for fsm store
* get rid of unneeded gateway condition generator struct
* Remove unused file
* run go mod tidy
* Update tests, add conflicted gateway status
* put back removed status for test
* Fix linting violation, remove custom conflicted status
* Update fsm commands oss
* Fix incorrect combination of type/condition/status
* cleaning up from PR review
* Change "invalidCertificate" to be of accepted status
* Move status condition enums into api package
* Update gateways controller and generated code
* Update conditions in fsm oss tests
* run go mod tidy on consul-container module to fix linting
* Fix type for gateway endpoint test
* go mod tidy from changes to api
* go mod tidy on troubleshoot
* Fix route conflicted reason
* fix route conflict reason rename
* Fix text for gateway conflicted status
* Add valid certificate ref condition setting
* Revert change to resolved refs to be handled in future PR
* add ability to start container tests in debug mode and attach a debugger to consul while running it.
* add a debug message with the debug port
* use pod to get the right port
* fix image used in basic test
* add more data to identify which container to debug.
* fix comment
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
* rename debugUri to debugURI
---------
Co-authored-by: Evan Culver <eculver@users.noreply.github.com>
- added Sameness Group to config entries
- added Sameness Group to subscriptions
* generated proto files
* added Sameness Group events to the state store
- added test cases
* Refactored health RPC Client
- moved code that is common to rpcclient under rpcclient common.go. This will help set us up to support future RPC clients
* Refactored proxycfg glue views
- Moved views to rpcclient config entry. This will allow us to reuse this code for a config entry client
* added config entry RPC Client
- Copied most of the testing code from rpcclient/health
* hooked up new rpcclient in agent
* fixed documentation and comments for clarity
* Exand route flattening test for multiple namespaces
* Add helper for checking http route config entry exists without checking for bound
status
* Fix port and hostname check for http route flattening test
* NET-2397: Add readme.md to upgrade test subdirectory
* remove test code
* fix link and update steps of adding new test cases (#16654)
* fix link and update steps of adding new test cases
* Apply suggestions from code review
Co-authored-by: Nick Irvine <115657443+nfi-hashicorp@users.noreply.github.com>
---------
Co-authored-by: Nick Irvine <115657443+nfi-hashicorp@users.noreply.github.com>
---------
Co-authored-by: cskh <hui.kang@hashicorp.com>
Co-authored-by: Nick Irvine <115657443+nfi-hashicorp@users.noreply.github.com>
* add snapshot restore test
* add logstore as test parameter
* Use the correct image version
* make sure we read the logs from a followers to test the follower snapshot install path.
* update to raf-wal v0.3.0
* add changelog.
* updating changelog for bug description and removed integration test.
* setting up test container builder to only set logStore for 1.15 and higher
---------
Co-authored-by: Paul Banks <pbanks@hashicorp.com>
Co-authored-by: John Murret <john.murret@hashicorp.com>
hc-github-team-consul-core