Commit graph

103 commits

Author SHA1 Message Date
Eric 91a493efe9 Bump go-control-plane
* `go get cloud.google.com/go@v0.59.0`
* `go get github.com/envoyproxy/go-control-plane@v0.9.9`
* `make envoy-library`
* Bumpprotoc to 3.15.8
2022-03-30 13:11:27 -04:00
R.B. Boyer cc4733e60d
proxycfg: change how various proxycfg test helpers for making ConfigSnapshot copies works to be more correct and less error prone (#12531)
Prior to this PR for the envoy xDS golden tests in the agent/xds package we
were hand-creating a proxycfg.ConfigSnapshot structure in the proper format for
input to the xDS generator. Over time this intermediate structure has gotten
trickier to build correctly for the various tests.

This PR proposes to switch to using the existing mechanism for turning a
structs.NodeService and a sequence of cache.UpdateEvent copies into a
proxycfg.ConfigSnapshot, as that is less error prone to construct and aligns
more with how the data arrives.

NOTE: almost all of this is in test-related code. I tried super hard to craft
correct event inputs to get the golden files to be the same, or similar enough
after construction to feel ok that i recreated the spirit of the original test
cases.
2022-03-07 11:47:14 -06:00
freddygv d5a2eb677f Ensure passthrough addresses get cleaned up
Transparent proxies can set up filter chains that allow direct
connections to upstream service instances. Services that can be dialed
directly are stored in the PassthroughUpstreams map of the proxycfg
snapshot.

Previously these addresses were not being cleaned up based on new
service health data. The list of addresses associated with an upstream
service would only ever grow.

As services scale up and down, eventually they will have instances
assigned to an IP that was previously assigned to a different service.
When IP addresses are duplicated across filter chain match rules the
listener config will be rejected by Envoy.

This commit updates the proxycfg snapshot management so that passthrough
addresses can get cleaned up when no longer associated with a given
upstream.

There is still the possibility of a race condition here where due to
timing an address is shared between multiple passthrough upstreams.
That concern is mitigated by #12195, but will be further addressed
in a follow-up.
2022-02-10 17:01:57 -07:00
Evan Culver b3c92f22b1
connect: Remove support for Envoy 1.16 (#11354) 2021-10-27 18:51:35 -07:00
Evan Culver 98acbfa79c
connect: Add support for Envoy 1.20 (#11277) 2021-10-27 18:38:10 -07:00
freddygv 69476221c1 Update XDS for sidecars dialing through gateways 2021-10-26 23:35:48 -06:00
Evan Culver 69f4cc7532
regenerate envoy golden files 2021-09-21 16:21:00 -07:00
freddygv b1050e4229 Update prepared query cluster SAN validation
Previously SAN validation for prepared queries was broken because we
validated against the name, namespace, and datacenter for prepared
queries.

However, prepared queries can target:

- Services with a name that isn't their own
- Services in multiple datacenters

This means that the SpiffeID to validate needs to be based on the
prepared query endpoints, and not the prepared query's upstream
definition.

This commit updates prepared query clusters to account for that.
2021-08-20 17:40:33 -06:00
freddygv 3d4fa44c22 Update golden files 2021-07-14 22:21:55 -06:00
freddygv a6f7d806f6 Update golden files to account for SAN validation 2021-07-14 22:21:55 -06:00
Freddy 61ae2995b7
Add flag for transparent proxies to dial individual instances (#10329) 2021-06-09 14:34:17 -06:00
Freddy c61e2bbda7
Ensure passthrough clusters can be created (#10301) 2021-05-26 15:05:14 -06:00
Mark Anderson b9fc9ddc01 Add simple test for downstream sockets
Signed-off-by: Mark Anderson <manderson@hashicorp.com>
2021-05-04 12:41:43 -07:00
R.B. Boyer 97e57aedfb
connect: update supported envoy versions to 1.18.2, 1.17.2, 1.16.3, and 1.15.4 (#10101)
The only thing that needed fixing up pertained to this section of the 1.18.x release notes:

> grpc_stats: the default value for stats_for_all_methods is switched from true to false, in order to avoid possible memory exhaustion due to an untrusted downstream sending a large number of unique method names. The previous default value was deprecated in version 1.14.0. This only changes the behavior when the value is not set. The previous behavior can be used by setting the value to true. This behavior change by be overridden by setting runtime feature envoy.deprecated_features.grpc_stats_filter_enable_stats_for_all_methods_by_default.

For now to maintain status-quo I'm explicitly setting `stats_for_all_methods=true` in all versions to avoid relying upon the default.

Additionally the naming of the emitted metrics for these gRPC requests changed slightly so the integration test assertions for `case-grpc` needed adjusting.
2021-04-29 15:22:03 -05:00
freddygv 5b59780431 Update xds for transparent proxy 2021-03-17 13:40:49 -06:00
R.B. Boyer 503041f216
xds: default to speaking xDS v3, but allow for v2 to be spoken upon request (#9658)
- Also add support for envoy 1.17.0
2021-02-26 16:23:15 -06:00
R.B. Boyer 4336d522c1
test: omit envoy golden test files that differ from the latest version (#9807)
Since we currently do no version switching this removes 75% of the PR
noise.

To generate all *.golden files were removed and then I ran:

    go test ./agent/xds -update
2021-02-24 14:04:31 -06:00
R.B. Boyer cdc5e99184
xds: remove deprecated usages of xDS (#9602)
Note that this does NOT upgrade to xDS v3. That will come in a future PR.

Additionally:

- Ignored staticcheck warnings about how github.com/golang/protobuf is deprecated.
- Shuffled some agent/xds imports in advance of a later xDS v3 upgrade.
- Remove support for envoy 1.13.x but don't add in 1.17.x yet. We have to wait until the xDS v3 support is added in a follow-up PR.

Fixes #8425
2021-02-22 15:00:15 -06:00
R.B. Boyer 2183842f0e
connect: add support for envoy 1.16.0, drop support for 1.12.x, and bump point releases as well (#8944)
Supported versions will be: "1.16.0", "1.15.2", "1.14.5", "1.13.6"
2020-10-22 13:46:19 -05:00
freddygv 0c50b8e769 Add explicit protocol overrides in tgw xds test cases 2020-09-03 08:57:48 -06:00
freddygv d7bda050e0 Restructure structs and other PR comments 2020-09-02 09:10:50 -06:00
freddygv 194d34b09d Pass LB config to Envoy via xDS 2020-08-28 14:27:40 -06:00
R.B. Boyer 8ea4c482b3
xds: add support for envoy 1.15.0 and drop support for 1.11.x (#8424)
Related changes:

- hard-fail the xDS connection attempt if the envoy version is known to be too old to be supported
- remove the RouterMatchSafeRegex proxy feature since all supported envoy versions have it
- stop using --max-obj-name-len (due to: envoyproxy/envoy#11740)
2020-07-31 15:52:49 -05:00
R.B. Boyer 6e3d07c995
xds: version sniff envoy and switch regular expressions from 'regex' to 'safe_regex' on newer envoy versions (#8222)
- cut down on extra node metadata transmission
- split the golden file generation to compare all envoy version
2020-07-09 17:04:51 -05:00
Freddy 7e7c783c8f
Always return a gateway cluster (#8158) 2020-06-19 13:31:39 -06:00
Freddy 66e2def461
Only pass one hostname via EDS and prefer healthy ones (#8084)
Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com>

Currently when passing hostname clusters to Envoy, we set each service instance registered with Consul as an LbEndpoint for the cluster.

However, Envoy can only handle one per cluster:
[2020-06-04 18:32:34.094][1][warning][config] [source/common/config/grpc_subscription_impl.cc:87] gRPC config for type.googleapis.com/envoy.api.v2.Cluster rejected: Error adding/updating cluster(s) dc2.internal.ddd90499-9b47-91c5-4616-c0cbf0fc358a.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint, server.dc2.consul: LOGICAL_DNS clusters must have a single locality_lb_endpoint and a single lb_endpoint

Envoy is currently handling this gracefully by only picking one of the endpoints. However, we should avoid passing multiple to avoid these warning logs.

This PR:

* Ensures we only pass one endpoint, which is tied to one service instance.
* We prefer sending an endpoint which is marked as Healthy by Consul.
* If no endpoints are healthy we emit a warning and skip the cluster.
* If multiple unique hostnames are spread across service instances we emit a warning and let the user know which will be resolved.
2020-06-12 13:46:17 -06:00
Freddy f759a48726
Enable gateways to resolve hostnames to IPv4 addresses (#7999)
The DNS resolution will be handled by Envoy and defaults to LOGICAL_DNS. This discovery type can be overridden on a per-gateway basis with the envoy_dns_discovery_type Gateway Option.

If a service contains an instance with a hostname as an address we set the Envoy cluster to use DNS as the discovery type rather than EDS. Since both mesh gateways and terminating gateways route to clusters using SNI, whenever there is a mix of hostnames and IP addresses associated with a service we use the hostname + CDS rather than the IPs + EDS.

Note that we detect hostnames by attempting to parse the service instance's address as an IP. If it is not a valid IP we assume it is a hostname.
2020-06-03 15:28:45 -06:00
Kyle Havlovitz e4268c8b7f Support multiple listeners referencing the same service in gateway definitions 2020-05-06 15:06:13 -05:00
Freddy f5c1e5268b
TLS Origination for Terminating Gateways (#7671) 2020-04-27 16:25:37 -06:00
freddygv 929491c979 Add subset support 2020-04-27 11:08:40 -06:00
freddygv 2e35a9bb18 Add xds cluster/listener/endpoint management 2020-04-27 11:08:40 -06:00
Chris Piraino af5cc8fd92 Add all the xds ingress tests
This commit copies many of the connect-proxy xds testcases and reuses
for ingress gateways. This allows us to more easily see changes to the
envoy configuration when make updates to ingress gateways.
2020-04-24 09:31:32 -05:00
Kyle Havlovitz 6a5eba63ab
Ingress Gateways for TCP services (#7509)
* Implements a simple, tcp ingress gateway workflow

This adds a new type of gateway for allowing Ingress traffic into Connect from external services.

Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
2020-04-16 14:00:48 -07:00
Andy Lindeman 42224fe45c
proxycfg: support path exposed with non-HTTP2 protocol (#7510)
If a proxied service is a gRPC or HTTP2 service, but a path is exposed
using the HTTP1 or TCP protocol, Envoy should not be configured with
`http2ProtocolOptions` for the cluster backing the path.

A situation where this comes up is a gRPC service whose healthcheck or
metrics route (e.g. for Prometheus) is an HTTP1 service running on
a different port. Previously, if these were exposed either using
`Expose: { Checks: true }` or `Expose: { Paths: ... }`, Envoy would
still be configured to communicate with the path over HTTP2, which would
not work properly.
2020-04-02 09:35:04 +02:00
Kim Ngo 9e8eb7896f
agent/xds: Update mesh gateway to use service router timeout (#7444)
* website/connect/proxy/envoy: specify timeout precedence for services behind mesh gateway
2020-03-17 14:50:14 -05:00
R.B. Boyer a7fb26f50f
wan federation via mesh gateways (#6884)
This is like a Möbius strip of code due to the fact that low-level components (serf/memberlist) are connected to high-level components (the catalog and mesh-gateways) in a twisty maze of references which make it hard to dive into. With that in mind here's a high level summary of what you'll find in the patch:

There are several distinct chunks of code that are affected:

* new flags and config options for the server

* retry join WAN is slightly different

* retry join code is shared to discover primary mesh gateways from secondary datacenters

* because retry join logic runs in the *agent* and the results of that
  operation for primary mesh gateways are needed in the *server* there are
  some methods like `RefreshPrimaryGatewayFallbackAddresses` that must occur
  at multiple layers of abstraction just to pass the data down to the right
  layer.

* new cache type `FederationStateListMeshGatewaysName` for use in `proxycfg/xds` layers

* the function signature for RPC dialing picked up a new required field (the
  node name of the destination)

* several new RPCs for manipulating a FederationState object:
  `FederationState:{Apply,Get,List,ListMeshGateways}`

* 3 read-only internal APIs for debugging use to invoke those RPCs from curl

* raft and fsm changes to persist these FederationStates

* replication for FederationStates as they are canonically stored in the
  Primary and replicated to the Secondaries.

* a special derivative of anti-entropy that runs in secondaries to snapshot
  their local mesh gateway `CheckServiceNodes` and sync them into their upstream
  FederationState in the primary (this works in conjunction with the
  replication to distribute addresses for all mesh gateways in all DCs to all
  other DCs)

* a "gateway locator" convenience object to make use of this data to choose
  the addresses of gateways to use for any given RPC or gossip operation to a
  remote DC. This gets data from the "retry join" logic in the agent and also
  directly calls into the FSM.

* RPC (`:8300`) on the server sniffs the first byte of a new connection to
  determine if it's actually doing native TLS. If so it checks the ALPN header
  for protocol determination (just like how the existing system uses the
  type-byte marker).

* 2 new kinds of protocols are exclusively decoded via this native TLS
  mechanism: one for ferrying "packet" operations (udp-like) from the gossip
  layer and one for "stream" operations (tcp-like). The packet operations
  re-use sockets (using length-prefixing) to cut down on TLS re-negotiation
  overhead.

* the server instances specially wrap the `memberlist.NetTransport` when running
  with gateway federation enabled (in a `wanfed.Transport`). The general gist is
  that if it tries to dial a node in the SAME datacenter (deduced by looking
  at the suffix of the node name) there is no change. If dialing a DIFFERENT
  datacenter it is wrapped up in a TLS+ALPN blob and sent through some mesh
  gateways to eventually end up in a server's :8300 port.

* a new flag when launching a mesh gateway via `consul connect envoy` to
  indicate that the servers are to be exposed. This sets a special service
  meta when registering the gateway into the catalog.

* `proxycfg/xds` notice this metadata blob to activate additional watches for
  the FederationState objects as well as the location of all of the consul
  servers in that datacenter.

* `xds:` if the extra metadata is in place additional clusters are defined in a
  DC to bulk sink all traffic to another DC's gateways. For the current
  datacenter we listen on a wildcard name (`server.<dc>.consul`) that load
  balances all servers as well as one mini-cluster per node
  (`<node>.server.<dc>.consul`)

* the `consul tls cert create` command got a new flag (`-node`) to help create
  an additional SAN in certs that can be used with this flavor of federation.
2020-03-09 15:59:02 -05:00
Matt Keeler 154eafe140
xDS Mesh Gateway Resolver Subset Fixes (#7294)
* xDS Mesh Gateway Resolver Subset Fixes

The first fix was that clusters were being generated for every service resolver subset regardless of there being any service instances of the associated service in that dc. The previous logic didn’t care at all but now it will omit generating those clusters unless we also have service instances that should be proxied.

The second fix was to respect the DefaultSubset of a service resolver so that mesh-gateways would configure the endpoints of the unnamed subset cluster to only those endpoints matched by the default subsets filters.

* Refactor the gateway endpoint generation to be a little easier to read
2020-02-19 11:57:55 -05:00
Chris Piraino 2a95701341
Allow configuration of upstream connection limits in Envoy (#6829)
* Adds 'limits' field to the upstream configuration of a connect proxy

This allows a user to configure the envoy connect proxy with
'max_connections', 'max_queued_requests', and 'max_concurrent_requests'. These
values are defined in the local proxy on a per-service instance basis
and should thus NOT be thought of as a global-level or even service-level value.
2019-12-03 14:13:33 -06:00
R.B. Boyer b091647090
agent: allow mesh gateways to initialize even if there are no connect services registered yet (#6576)
Fixes #6543

Also improved some of the proxycfg tests to cover snapshot validity
better.
2019-10-17 16:46:49 -05:00
Freddy 5eace88ce2
Expose HTTP-based paths through Connect proxy (#6446)
Fixes: #5396

This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.

Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.

This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.

Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.

In this initial implementation requests to these paths are not
authenticated/encrypted.
2019-09-25 20:55:52 -06:00
R.B. Boyer ea65298070
connect: allow 'envoy_cluster_json' escape hatch to continue to function (#6378) 2019-08-22 15:11:56 -05:00
R.B. Boyer d6456fddeb
connect: introduce ExternalSNI field on service-defaults (#6324)
Compiling this will set an optional SNI field on each DiscoveryTarget.
When set this value should be used for TLS connections to the instances
of the target. If not set the default should be used.

Setting ExternalSNI will disable mesh gateway use for that target. It also 
disables several service-resolver features that do not make sense for an 
external service.
2019-08-19 12:19:44 -05:00
R.B. Boyer 91df06098c
xds: improve how envoy metrics are emitted (#6312)
Since generated envoy clusters all are named using (mostly) SNI syntax
we can have envoy read the various fields out of that structure and emit
it as stats labels to the various telemetry backends.

I changed the delimiter for the 'customization hash' from ':' to '~'
because ':' is always reencoded by envoy as '_' when generating metrics
keys.
2019-08-16 09:30:17 -05:00
R.B. Boyer 64fc002e03
connect: fix failover through a mesh gateway to a remote datacenter (#6259)
Failover is pushed entirely down to the data plane by creating envoy
clusters and putting each successive destination in a different load
assignment priority band. For example this shows that normally requests
go to 1.2.3.4:8080 but when that fails they go to 6.7.8.9:8080:

- name: foo
  load_assignment:
    cluster_name: foo
    policy:
      overprovisioning_factor: 100000
    endpoints:
    - priority: 0
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 1.2.3.4
              port_value: 8080
    - priority: 1
      lb_endpoints:
      - endpoint:
          address:
            socket_address:
              address: 6.7.8.9
              port_value: 8080

Mesh gateways route requests based solely on the SNI header tacked onto
the TLS layer. Envoy currently only lets you configure the outbound SNI
header at the cluster layer.

If you try to failover through a mesh gateway you ideally would
configure the SNI value per endpoint, but that's not possible in envoy
today.

This PR introduces a simpler way around the problem for now:

1. We identify any target of failover that will use mesh gateway mode local or
   remote and then further isolate any resolver node in the compiled discovery
   chain that has a failover destination set to one of those targets.

2. For each of these resolvers we will perform a small measurement of
   comparative healths of the endpoints that come back from the health API for the
   set of primary target and serial failover targets. We walk the list of targets
   in order and if any endpoint is healthy we return that target, otherwise we
   move on to the next target.

3. The CDS and EDS endpoints both perform the measurements in (2) for the
   affected resolver nodes.

4. For CDS this measurement selects which TLS SNI field to use for the cluster
   (note the cluster is always going to be named for the primary target)

5. For EDS this measurement selects which set of endpoints will populate the
   cluster. Priority tiered failover is ignored.

One of the big downsides to this approach to failover is that the failover
detection and correction is going to be controlled by consul rather than
deferring that entirely to the data plane as with the prior version. This also
means that we are bound to only failover using official health signals and
cannot make use of data plane signals like outlier detection to affect
failover.

In this specific scenario the lack of data plane signals is ok because the
effectiveness is already muted by the fact that the ultimate destination
endpoints will have their data plane signals scrambled when they pass through
the mesh gateway wrapper anyway so we're not losing much.

Another related fix is that we now use the endpoint health from the
underlying service, not the health of the gateway (regardless of
failover mode).
2019-08-05 13:30:35 -05:00
R.B. Boyer 4666599e18
connect: reconcile how upstream configuration works with discovery chains (#6225)
* connect: reconcile how upstream configuration works with discovery chains

The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:

- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.

- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).

- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).

- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).

- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).

If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.

Fixes #6159
2019-08-01 22:03:34 -05:00
R.B. Boyer 72a8195839
implement some missing service-router features and add more xDS testing (#6065)
- also implement OnlyPassing filters for non-gateway clusters
2019-07-12 14:16:21 -05:00
Jack Pearkes 2b1761bab3 Make cluster names SNI always (#6081)
* Make cluster names SNI always

* Update some tests

* Ensure we check for prepared query types

* Use sni for route cluster names

* Proper mesh gateway mode defaulting when the discovery chain is used

* Ignore service splits from PatchSliceOfMaps

* Update some xds golden files for proper test output

* Allow for grpc/http listeners/cluster configs with the disco chain

* Update stats expectation
2019-07-08 12:48:48 +01:00
Matt Keeler 0a0775b9a6 Fix a bunch of xds flaky tests
The clusters/endpoints test were still relying on deterministic ordering of clusters/endpoints which cannot be relied upon due to golang purposefully not providing any guarantee about consistent interation ordering of maps.

Also fixed a small bug in the connect proxy cluster generation that was causing the clusters slice to be double the size it needed to with the first half being all nil pointers.
2019-07-02 15:53:06 -04:00
Matt Keeler b7ca53f9e3 Update xds/proxycfg tests to use the same looking trust domain as a normal system
This is to prevent confusion about what our SNI fields actually look like.
2019-07-02 10:29:37 -04:00
Matt Keeler e916f2d954 Implement mesh gateway management of service subsets
Fixup some error handling
2019-07-02 10:29:37 -04:00
Matt Keeler 39bb0e3e77 Implement Mesh Gateways
This includes both ingress and egress functionality.
2019-07-01 16:28:30 -04:00
Paul Banks 737be347eb
Upgrade xDS (go-control-plane) API to support Envoy 1.10. (#5872)
* Upgrade xDS (go-control-plane) API to support Envoy 1.10.

This includes backwards compatibility shim to work around the ext_authz package rename in 1.10.

It also adds integration test support in CI for 1.10.0.

* Fix go vet complaints

* go mod vendor

* Update Envoy version info in docs

* Update website/source/docs/connect/proxies/envoy.md
2019-06-07 07:10:43 -05:00
Paul Banks d6c0557e86
Connect: allow configuring Envoy for L7 Observability (#5558)
* Add support for HTTP proxy listeners

* Add customizable bootstrap configuration options

* Debug logging for xDS AuthZ

* Add Envoy Integration test suite with basic test coverage

* Add envoy command tests to cover new cases

* Add tracing integration test

* Add gRPC support WIP

* Merged changes from master Docker. get CI integration to work with same Dockerfile now

* Make docker build optional for integration

* Enable integration tests again!

* http2 and grpc integration tests and fixes

* Fix up command config tests

* Store all container logs as artifacts in circle on fail

* Add retries to outer part of stats measurements as we keep missing them in CI

* Only dump logs on failing cases

* Fix typos from code review

* Review tidying and make tests pass again

* Add debug logs to exec test.

* Fix legit test failure caused by upstream rename in envoy config

* Attempt to reduce cases of bad TLS handshake in CI integration tests

* bring up the right service

* Add prometheus integration test

* Add test for denied AuthZ both HTTP and TCP

* Try ANSI term for Circle
2019-04-29 17:27:57 +01:00