This implements permissive mTLS , which allows toggling services into "permissive" mTLS mode.
Permissive mTLS mode allows incoming "non Consul-mTLS" traffic to be forward unmodified to the application.
* Update service-defaults and proxy-defaults config entries with a MutualTLSMode field
* Update the mesh config entry with an AllowEnablingPermissiveMutualTLS field and implement the necessary validation. AllowEnablingPermissiveMutualTLS must be true to allow changing to MutualTLSMode=permissive, but this does not require that all proxy-defaults and service-defaults are currently in strict mode.
* Update xDS listener config to add a "permissive filter chain" when MutualTLSMode=permissive for a particular service. The permissive filter chain matches incoming traffic by the destination port. If the destination port matches the service port from the catalog, then no mTLS is required and the traffic sent is forwarded unmodified to the application.
This gets the extensions information for the local service into the snapshot and ExtensionConfigurations for a proxy. It grabs the extensions from config entries and puts them in structs.NodeService.Proxy field, which already is copied into the config snapshot.
Also:
* add EnvoyExtensions to api.AgentService so that it matches structs.NodeService
* Fix mesh gateway proxy-defaults not affecting upstreams.
* Clarify distinction with upstream settings
Top-level mesh gateway mode in proxy-defaults and service-defaults gets
merged into NodeService.Proxy.MeshGateway, and only gets merged with
the mode attached to an an upstream in proxycfg/xds.
* Fix mgw mode usage for peered upstreams
There were a couple issues with how mgw mode was being handled for
peered upstreams.
For starters, mesh gateway mode from proxy-defaults
and the top-level of service-defaults gets stored in
NodeService.Proxy.MeshGateway, but the upstream watch for peered data
was only considering the mesh gateway config attached in
NodeService.Proxy.Upstreams[i]. This means that applying a mesh gateway
mode via global proxy-defaults or service-defaults on the downstream
would not have an effect.
Separately, transparent proxy watches for peered upstreams didn't
consider mesh gateway mode at all.
This commit addresses the first issue by ensuring that we overlay the
upstream config for peered upstreams as we do for non-peered. The second
issue is addressed by re-using setupWatchesForPeeredUpstream when
handling transparent proxy updates.
Note that for transparent proxies we do not yet support mesh gateway
mode per upstream, so the NodeService.Proxy.MeshGateway mode is used.
* Fix upstream mesh gateway mode handling in xds
This commit ensures that when determining the mesh gateway mode for
peered upstreams we consider the NodeService.Proxy.MeshGateway config as
a baseline.
In absense of this change, setting a mesh gateway mode via
proxy-defaults or the top-level of service-defaults will not have an
effect for peered upstreams.
* Merge service/proxy defaults in cfg resolver
Previously the mesh gateway mode for connect proxies would be
merged at three points:
1. On servers, in ComputeResolvedServiceConfig.
2. On clients, in MergeServiceConfig.
3. On clients, in proxycfg/xds.
The first merge returns a ServiceConfigResponse where there is a
top-level MeshGateway config from proxy/service-defaults, along with
per-upstream config.
The second merge combines per-upstream config specified at the service
instance with per-upstream config specified centrally.
The third merge combines the NodeService.Proxy.MeshGateway
config containing proxy/service-defaults data with the per-upstream
mode. This third merge is easy to miss, which led to peered upstreams
not considering the mesh gateway mode from proxy-defaults.
This commit removes the third merge, and ensures that all mesh gateway
config is available at the upstream. This way proxycfg/xds do not need
to do additional overlays.
* Ensure that proxy-defaults is considered in wc
Upstream defaults become a synthetic Upstream definition under a
wildcard key "*". Now that proxycfg/xds expect Upstream definitions to
have the final MeshGateway values, this commit ensures that values from
proxy-defaults/service-defaults are the default for this synthetic
upstream.
* Add changelog.
Co-authored-by: freddygv <freddy@hashicorp.com>
The gist here is that now we use a value-type struct proxycfg.UpstreamID
as the map key in ConfigSnapshot maps where we used to use "upstream
id-ish" strings. These are internal only and used just for bidirectional
trips through the agent cache keyspace (like the discovery chain target
struct).
For the few places where the upstream id needs to be projected into xDS,
that's what (proxycfg.UpstreamID).EnvoyID() is for. This lets us ALWAYS
inject the partition and namespace into these things without making
stuff like the golden testdata diverge.
Some users are defining routing configurations that do not have associated services. This commit surfaces these configs in the topology visualization. Also fixes a minor internal bug with non-transparent proxy upstream/downstream references.
This way we avoid serializing these when empty. Otherwise users of the
latest version of the api submodule cannot interact with older versions
of Consul, because a new api client would send keys that the older Consul
doesn't recognize yet.
This PR replaces the original boolean used to configure transparent
proxy mode. It was replaced with a string mode that can be set to:
- "": Empty string is the default for when the setting should be
defaulted from other configuration like config entries.
- "direct": Direct mode is how applications originally opted into the
mesh. Proxy listeners need to be dialed directly.
- "transparent": Transparent mode enables configuring Envoy as a
transparent proxy. Traffic must be captured and redirected to the
inbound and outbound listeners.
This PR also adds a struct for transparent proxy specific configuration.
Initially this is not stored as a pointer. Will revisit that decision
before GA.
Previously config entries sharing a kind & name but in different
namespaces could occasionally cause "stuck states" in replication
because the namespace fields were ignored during the differential
comparison phase.
Example:
Two config entries written to the primary:
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
Under the covers these both get saved to memdb, so they are sorted by
all 3 components (kind,name,namespace) during natural iteration. This
means that before the replication code does it's own incomplete sort,
the underlying data IS sorted by namespace ascending (bar comes before
foo).
After one pass of replication the primary and secondary datacenters have
the same set of config entries present. If
"kind=A,name=web,namespace=bar" were to be deleted, then things get
weird. Before replication the two sides look like:
primary: [
kind=A,name=web,namespace=foo
]
secondary: [
kind=A,name=web,namespace=bar
kind=A,name=web,namespace=foo
]
The differential comparison phase walks these two lists in sorted order
and first compares "kind=A,name=web,namespace=foo" vs
"kind=A,name=web,namespace=bar" and falsely determines they are the SAME
and are thus cause an update of "kind=A,name=web,namespace=foo". Then it
compares "<nothing>" with "kind=A,name=web,namespace=foo" and falsely
determines that the latter should be DELETED.
During reconciliation the deletes are processed before updates, and so
for a brief moment in the secondary "kind=A,name=web,namespace=foo" is
erroneously deleted and then immediately restored.
Unfortunately after this replication phase the final state is identical
to the initial state, so when it loops around again (rate limited) it
repeats the same set of operations indefinitely.
- Validate that this cannot be set on a 'tcp' listener nor on a wildcard
service.
- Add Hosts field to api and test in consul config write CLI
- xds: Configure envoy with user-provided hosts from ingress gateways
* Add Ingress gateway config entry and other relevant structs
* Add api package tests for ingress gateways
* Embed EnterpriseMeta into ingress service struct
* Add namespace fields to api module and test consul config write decoding
* Don't require a port for ingress gateways
* Add snakeJSON and camelJSON cases in command test
* Run Normalize on service's ent metadata
Sadly cannot think of a way to test this in OSS.
* Every protocol requires at least 1 service
* Validate ingress protocols
* Update agent/structs/config_entry_gateways.go
Co-authored-by: Chris Piraino <cpiraino@hashicorp.com>
Co-authored-by: Freddy <freddygv@users.noreply.github.com>
Also update the Docs and fixup the HTTP API to return proper errors when someone attempts to use Namespaces with an OSS agent.
Add Namespace HTTP API docs
Make all API endpoints disallow unknown fields
Fixes: #5396
This PR adds a proxy configuration stanza called expose. These flags register
listeners in Connect sidecar proxies to allow requests to specific HTTP paths from outside of the node. This allows services to protect themselves by only
listening on the loopback interface, while still accepting traffic from non
Connect-enabled services.
Under expose there is a boolean checks flag that would automatically expose all
registered HTTP and gRPC check paths.
This stanza also accepts a paths list to expose individual paths. The primary
use case for this functionality would be to expose paths for third parties like
Prometheus or the kubelet.
Listeners for requests to exposed paths are be configured dynamically at run
time. Any time a proxy, or check can be registered, a listener can also be
created.
In this initial implementation requests to these paths are not
authenticated/encrypted.
* connect: reconcile how upstream configuration works with discovery chains
The following upstream config fields for connect sidecars sanely
integrate into discovery chain resolution:
- Destination Namespace/Datacenter: Compilation occurs locally but using
different default values for namespaces and datacenters. The xDS
clusters that are created are named as they normally would be.
- Mesh Gateway Mode (single upstream): If set this value overrides any
value computed for any resolver for the entire discovery chain. The xDS
clusters that are created may be named differently (see below).
- Mesh Gateway Mode (whole sidecar): If set this value overrides any
value computed for any resolver for the entire discovery chain. If this
is specifically overridden for a single upstream this value is ignored
in that case. The xDS clusters that are created may be named differently
(see below).
- Protocol (in opaque config): If set this value overrides the value
computed when evaluating the entire discovery chain. If the normal chain
would be TCP or if this override is set to TCP then the result is that
we explicitly disable L7 Routing and Splitting. The xDS clusters that
are created may be named differently (see below).
- Connect Timeout (in opaque config): If set this value overrides the
value for any resolver in the entire discovery chain. The xDS clusters
that are created may be named differently (see below).
If any of the above overrides affect the actual result of compiling the
discovery chain (i.e. "tcp" becomes "grpc" instead of being a no-op
override to "tcp") then the relevant parameters are hashed and provided
to the xDS layer as a prefix for use in naming the Clusters. This is to
ensure that if one Upstream discovery chain has no overrides and
tangentially needs a cluster named "api.default.XXX", and another
Upstream does have overrides for "api.default.XXX" that they won't
cross-pollinate against the operator's wishes.
Fixes#6159
* connect: validate upstreams and prevent duplicates
* Actually run Upstream.Validate() instead of ignoring it as dead code.
* Prevent two upstreams from declaring the same bind address and port.
It wouldn't work anyway.
* Prevent two upstreams from being declared that use the same
type+name+namespace+datacenter. Due to how the Upstream.Identity()
function worked this ended up mostly being enforced in xDS at use-time,
but it should be enforced more clearly at register-time.
* Allow setting the mesh gateway mode for an upstream in config files
* Add envoy integration test for mesh gateways
This necessitated many supporting changes in most of the other test cases.
Add remote mode mesh gateways integration test
* Ensure the mesh gateway configuration comes back in the api within each upstream
* Add a test for the MeshGatewayConfig in the ToAPI functions
* Ensure we don’t use gateways for dc local connections
* Update the svc kind index for deletions
* Replace the proxycfg.state cache with an interface for testing
Also start implementing proxycfg state testing.
* Update the state tests to verify some gateway watches for upstream-targets of a discovery chain.
* Ensure we MapWalk the proxy config in the NodeService and ServiceNode structs
This gets rid of some json encoder errors in the catalog endpoints
* Allow passing explicit bind addresses to envoy
* Move map walking to the ConnectProxyConfig struct
Any place where this struct gets JSON encoded will benefit as opposed to having to implement it everywhere.
* Fail when a non-empty address is provided and not bindable
* camel case
* Update command/connect/envoy/envoy.go
Co-Authored-By: Paul Banks <banks@banksco.de>
* Fix some tests that I broke when refactoring the ConfigSnapshot
* Make sure the MeshGateway config is added to all the right api structs
* Fix some more tests
Paul Glass