Create linux packaging structure

Copied from hashicorp/linux-packaging
24e7e2675b

Signed-off-by: Scott Macfarlane <smacfarlane@hashicorp.com>
This commit is contained in:
Scott Macfarlane 2021-10-12 10:00:35 -07:00 committed by 99
parent 584ea01320
commit f85c1a9422
7 changed files with 157 additions and 2 deletions

View File

@ -5,7 +5,7 @@ on:
# Sequence of patterns matched against refs/heads
branches:
# Push events on crt-consul-migration branch
- crt-migration-1.11.0-betax
- crt-consul-migration
env:
PKG_NAME: consul

View File

@ -0,0 +1,96 @@
# Fullconfiguration options can be found at https://www.consul.io/docs/agent/options.html
# datacenter
# This flag controls the datacenter in which the agent is running. If not provided,
# it defaults to "dc1". Consul has first-class support for multiple datacenters, but
# it relies on proper configuration. Nodes in the same datacenter should be on a
# single LAN.
#datacenter = "my-dc-1"
# data_dir
# This flag provides a data directory for the agent to store state. This is required
# for all agents. The directory should be durable across reboots. This is especially
# critical for agents that are running in server mode as they must be able to persist
# cluster state. Additionally, the directory must support the use of filesystem
# locking, meaning some types of mounted folders (e.g. VirtualBox shared folders) may
# not be suitable.
data_dir = "/opt/consul"
# client_addr
# The address to which Consul will bind client interfaces, including the HTTP and DNS
# servers. By default, this is "127.0.0.1", allowing only loopback connections. In
# Consul 1.0 and later this can be set to a space-separated list of addresses to bind
# to, or a go-sockaddr template that can potentially resolve to multiple addresses.
#client_addr = "0.0.0.0"
# ui
# Enables the built-in web UI server and the required HTTP routes. This eliminates
# the need to maintain the Consul web UI files separately from the binary.
# Version 1.10 deprecated ui=true in favor of ui_config.enabled=true
#ui_config{
# enabled = true
#}
# server
# This flag is used to control if an agent is in server or client mode. When provided,
# an agent will act as a Consul server. Each Consul cluster must have at least one
# server and ideally no more than 5 per datacenter. All servers participate in the Raft
# consensus algorithm to ensure that transactions occur in a consistent, linearizable
# manner. Transactions modify cluster state, which is maintained on all server nodes to
# ensure availability in the case of node failure. Server nodes also participate in a
# WAN gossip pool with server nodes in other datacenters. Servers act as gateways to
# other datacenters and forward traffic as appropriate.
#server = true
# Bind addr
# You may use IPv4 or IPv6 but if you have multiple interfaces you must be explicit.
#bind_addr = "[::]" # Listen on all IPv6
#bind_addr = "0.0.0.0" # Listen on all IPv4
#
# Advertise addr - if you want to point clients to a different address than bind or LB.
#advertise_addr = "127.0.0.1"
# Enterprise License
# As of 1.10, Enterprise requires a license_path and does not have a short trial.
#license_path = "/etc/consul.d/consul.hclic"
# bootstrap_expect
# This flag provides the number of expected servers in the datacenter. Either this value
# should not be provided or the value must agree with other servers in the cluster. When
# provided, Consul waits until the specified number of servers are available and then
# bootstraps the cluster. This allows an initial leader to be elected automatically.
# This cannot be used in conjunction with the legacy -bootstrap flag. This flag requires
# -server mode.
#bootstrap_expect=3
# encrypt
# Specifies the secret key to use for encryption of Consul network traffic. This key must
# be 32-bytes that are Base64-encoded. The easiest way to create an encryption key is to
# use consul keygen. All nodes within a cluster must share the same encryption key to
# communicate. The provided key is automatically persisted to the data directory and loaded
# automatically whenever the agent is restarted. This means that to encrypt Consul's gossip
# protocol, this option only needs to be provided once on each agent's initial startup
# sequence. If it is provided after Consul has been initialized with an encryption key,
# then the provided key is ignored and a warning will be displayed.
#encrypt = "..."
# retry_join
# Similar to -join but allows retrying a join until it is successful. Once it joins
# successfully to a member in a list of members it will never attempt to join again.
# Agents will then solely maintain their membership via gossip. This is useful for
# cases where you know the address will eventually be available. This option can be
# specified multiple times to specify multiple agents to join. The value can contain
# IPv4, IPv6, or DNS addresses. In Consul 1.1.0 and later this can be set to a go-sockaddr
# template. If Consul is running on the non-default Serf LAN port, this must be specified
# as well. IPv6 must use the "bracketed" syntax. If multiple values are given, they are
# tried and retried in the order listed until the first succeeds. Here are some examples:
#retry_join = ["consul.domain.internal"]
#retry_join = ["10.0.4.67"]
#retry_join = ["[::1]:8301"]
#retry_join = ["consul.domain.internal", "10.0.4.67"]
# Cloud Auto-join examples:
# More details - https://www.consul.io/docs/agent/cloud-auto-join
#retry_join = ["provider=aws tag_key=... tag_value=..."]
#retry_join = ["provider=azure tag_name=... tag_value=... tenant_id=... client_id=... subscription_id=... secret_access_key=..."]
#retry_join = ["provider=gce project_name=... tag_value=..."]

View File

@ -0,0 +1,21 @@
[Unit]
Description="HashiCorp Consul - A service mesh solution"
Documentation=https://www.consul.io/
Requires=network-online.target
After=network-online.target
ConditionFileNotEmpty=/etc/consul.d/consul.hcl
[Service]
EnvironmentFile=/etc/consul.d/consul.env
User=consul
Group=consul
ExecStart=/usr/bin/consul agent -config-dir=/etc/consul.d/
ExecReload=/bin/kill --signal HUP $MAINPID
KillMode=process
KillSignal=SIGTERM
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target

10
.release/linux/postinst Normal file
View File

@ -0,0 +1,10 @@
#!/bin/bash
mkdir -p /opt/consul
chown -R consul:consul /opt/consul
chown -R consul:consul /etc/consul.d
if [ -d /run/systemd/system ]; then
systemctl --system daemon-reload >/dev/null || true
fi

14
.release/linux/postrm Normal file
View File

@ -0,0 +1,14 @@
#!/bin/bash
if [ "$1" = "purge" ]
then
userdel consul
fi
if [ "$1" == "upgrade" ] && [ -d /run/systemd/system ]; then
systemctl --system daemon-reload >/dev/null || true
systemctl restart consul >/dev/null || true
fi
exit 0

14
.release/linux/preinst Normal file
View File

@ -0,0 +1,14 @@
#!/bin/bash
set -eu
USER="consul"
if ! id -u $USER > /dev/null 2>&1; then
useradd \
--system \
--user-group \
--shell /bin/false \
$USER
fi

View File

@ -1,3 +1,3 @@
version:
@build-support/scripts/version.sh -r
@build-support/scripts/version.sh
.PHONY: version