Backport/docs/proxy defaults reformat other improvements/quietly joint monitor (#18699)

* tlsutil: Fix check TLS configuration (#17481) * tlsutil: Fix check TLS configuration * Rewording docs. * Update website/content/docs/services/configuration/checks-configuration-reference.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Fix typos and add changelog entry. --------- Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * docs: Deprecations for connect-native SDK and specific connect native APIs (#17937) * Update v1_16_x.mdx * Update connect native golang page --------- Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Revert "Add workflow to verify linux release packages (#17904)" (#17942) This reverts commit 3368f14fab500ebe9f6aeab5631dd1d5f5a453e5. * Fixes Secondary ConnectCA update (#17846) This fixes a bug that was identified which resulted in subsequent ConnectCA configuration update not to persist in the cluster. * fixing typo in link to jwt-validations-with-intentions doc (#17955) * Fix streaming backend link (#17958) * Fix streaming backend link * Update health.mdx * Dynamically create jwks clusters for jwt-providers (#17944) * website: remove deprecated agent rpc docs (#17962) * Fix missing BalanceOutboundConnections in v2 catalog. (#17964) * feature - [NET - 4005] - [Supportability] Reloadable Configuration - enable_debug (#17565) * # This is a combination of 9 commits. # This is the 1st commit message: init without tests # This is the commit message #2: change log # This is the commit message #3: fix tests # This is the commit message #4: fix tests # This is the commit message #5: added tests # This is the commit message #6: change log breaking change # This is the commit message #7: removed breaking change # This is the commit message #8: fix test # This is the commit message #9: keeping the test behaviour same * # This is a combination of 12 commits. # This is the 1st commit message: init without tests # This is the commit message #2: change log # This is the commit message #3: fix tests # This is the commit message #4: fix tests # This is the commit message #5: added tests # This is the commit message #6: change log breaking change # This is the commit message #7: removed breaking change # This is the commit message #8: fix test # This is the commit message #9: keeping the test behaviour same # This is the commit message #10: made enable debug atomic bool # This is the commit message #11: fix lint # This is the commit message #12: fix test true enable debug * parent 10f500e895d92cc3691ade7b74a33db755d22039 author absolutelightning <ashesh.vidyut@hashicorp.com> 1687352587 +0530 committer absolutelightning <ashesh.vidyut@hashicorp.com> 1687352592 +0530 init without tests change log fix tests fix tests added tests change log breaking change removed breaking change fix test keeping the test behaviour same made enable debug atomic bool fix lint fix test true enable debug using enable debug in agent as atomic bool test fixes fix tests fix tests added update on correct locaiton fix tests fix reloadable config enable debug fix tests fix init and acl 403 * revert commit * Fix formatting codeblocks on APIgw docs (#17970) * fix formatting codeblocks * remove unnecessary indents * Remove POC code (#17974) * update doc (#17910) * update doc * update link * Remove duplicate and unused newDecodeConfigEntry func (#17979) * docs: samenessGroup YAML examples (#17984) * configuration entry syntax * Example config * Add changelog entry for 1.16.0 (#17987) * Fix typo (#17198) servcies => services * Expose JWKS cluster config through JWTProviderConfigEntry (#17978) * Expose JWKS cluster config through JWTProviderConfigEntry * fix typos, rename trustedCa to trustedCA * Integration test for ext-authz Envoy extension (#17980) * Fix incorrect protocol for transparent proxy upstreams. (#17894) This PR fixes a bug that was introduced in: https://github.com/hashicorp/consul/pull/16021 A user setting a protocol in proxy-defaults would cause tproxy implicit upstreams to not honor the upstream service's protocol set in its `ServiceDefaults.Protocol` field, and would instead always use the proxy-defaults value. Due to the fact that upstreams configured with "tcp" can successfully contact upstream "http" services, this issue was not recognized until recently (a proxy-defaults with "tcp" and a listening service with "http" would make successful requests, but not the opposite). As a temporary work-around, users experiencing this issue can explicitly set the protocol on the `ServiceDefaults.UpstreamConfig.Overrides`, which should take precedence. The fix in this PR removes the proxy-defaults protocol from the wildcard upstream that tproxy uses to configure implicit upstreams. When the protocol was included, it would always overwrite the value during discovery chain compilation, which was not correct. The discovery chain compiler also consumes proxy defaults to determine the protocol, so simply excluding it from the wildcard upstream config map resolves the issue. * feat: include nodes count in operator usage endpoint and cli command (#17939) * feat: update operator usage api endpoint to include nodes count * feat: update operator usange cli command to includes nodes count * [OSS] Improve Gateway Test Coverage of Catalog Health (#18011) * fix(cli): remove failing check from 'connect envoy' registration for api gateway * test(integration): add tests to check catalog statsus of gateways on startup * remove extra sleep comment * Update test/integration/consul-container/libs/assert/service.go * changelog * Fixes Traffic rate limitting docs (#17997) * Fix removed service-to-service peering links (#17221) * docs: fix removed service-to-service peering links * docs: extend peering-via-mesh-gateways intro (thanks @trujillo-adam) --------- Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * docs: Sameness "beta" warning (#18017) * Warning updates * .x * updated typo in tab heading (#18022) * updated typo in tab heading * updated tab group typo, too * Document that DNS lookups can target cluster peers (#17990) Static DNS lookups, in addition to explicitly targeting a datacenter, can target a cluster peer. This was added in 95dc0c7b301b70a6b955a8b7c9737c9b86f03df6 but didn't make the documentation. The driving function for the change is `parseLocality` here: 0b1299c28d/agent/dns_oss.go (L25) The biggest change in this is to adjust the standard lookup syntax to tie `.<datacenter>` to `.dc` as required-together, and to append in the similar `.<cluster-peer>.peer` optional argument, both to A record and SRV record lookups. Co-authored-by: David Yu <dyu@hashicorp.com> * Add first integration test for jwt auth with intention (#18005) * fix stand-in text for name field (#18030) * removed sameness conf entry from failover nav (#18033) * docs - add service sync annotations and k8s service weight annotation (#18032) * Docs for https://github.com/hashicorp/consul-k8s/pull/2293 * remove versions for enterprise features since they are old --------- Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com> * docs - add jobs use case for service mesh k8s (#18037) * docs - add jobs use case for service mesh k8s * add code blocks * address feedback (#18045) * Add verify server hostname to tls default (#17155) * [OSS] Fix initial_fetch_timeout to wait for all xDS resources (#18024) * fix(connect): set initial_fetch_time to wait indefinitely * changelog * PR feedback 1 * ui: fix typos for peer service imports (#17999) * test: fix FIPS inline cert test message (#18076) * Fix a couple typos in Agent Telemetry Metrics docs (#18080) * Fix metrics docs * Add changelog Signed-off-by: josh <josh.timmons@hashicorp.com> --------- Signed-off-by: josh <josh.timmons@hashicorp.com> * docs updates - cluster peering and virtual services (#18069) * Update route-to-virtual-services.mdx * Update establish-peering.mdx * Update service-mesh-compare.mdx (#17279) grammar change * Update helm docs on main (#18085) * ci: use gotestsum v1.10.1 [NET-4042] (#18088) * Docs: Update proxy lifecycle annotations and consul-dataplane flags (#18075) * Update proxy lifecycle annotations and consul-dataplane flags * Pass configured role name to Vault for AWS auth in Connect CA (#17885) * Docs for dataplane upgrade on k8s (#18051) * Docs for dataplane upgrade on k8s --------- Co-authored-by: David Yu <dyu@hashicorp.com> Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * docs - update upgrade index page to not recommend consul leave. (#18100) * Displays Consul version of each nodes in UI nodes section (#17754) * update UINodes and UINodeInfo response with consul-version info added as NodeMeta, fetched from serf members * update test cases TestUINodes, TestUINodeInfo * added nil check for map * add consul-version in local agent node metadata * get consul version from serf member and add this as node meta in catalog register request * updated ui mock response to include consul versions as node meta * updated ui trans and added version as query param to node list route * updates in ui templates to display consul version with filter and sorts * updates in ui - model class, serializers,comparators,predicates for consul version feature * added change log for Consul Version Feature * updated to get version from consul service, if for some reason not available from serf * updated changelog text * updated dependent testcases * multiselection version filter * Update agent/consul/state/catalog.go comments updated Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com> --------- Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com> * api gw 1.16 updates (#18081) * api gw 1.16 updates * Apply suggestions from code review Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * update CodeBlockConfig filename * Apply suggestions from code review Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * remove non-standard intentions page * Update website/content/docs/api-gateway/configuration/index.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> --------- Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * [NET-4103] ci: build s390x (#18067) * ci: build s390x * ci: test s390x * ci: dev build s390x * no GOOS * ent only * build: publish s390x * fix syntax error * fix syntax error again * fix syntax error again x2 * test branch * Move s390x conditionals to step level * remove test branch --------- Co-authored-by: emilymianeil <eneil@hashicorp.com> * :ermahgerd "Sevice Mesh" -> "Service Mesh" (#18116) Just a typo in the docs. * Split pbmesh.UpstreamsConfiguration as a resource out of pbmesh.Upstreams (#17991) Configuration that previously was inlined into the Upstreams resource applies to both explicit and implicit upstreams and so it makes sense to split it out into its own resource. It also has other minor changes: - Renames `proxy.proto` proxy_configuration.proto` - Changes the type of `Upstream.destination_ref` from `pbresource.ID` to `pbresource.Reference` - Adds comments to fields that didn't have them * [NET-4895] ci - api tests and consul container tests error because of dependency bugs with go 1.20.6. Pin go to 1.20.5. (#18124) ### Description The following jobs started failing when go 1.20.6 was released: - `go-test-api-1-19` - `go-test-api-1-20` - `compatibility-integration-tests` - `upgrade-integration-tests` `compatibility-integration-tests` and `compatibility-integration-tests` to this testcontainers issue: https://github.com/testcontainers/testcontainers-go/issues/1359. This issue calls for testcontainers to release a new version when one of their dependencies is fixed. When that is done, we will unpin the go versions in `compatibility-integration-tests` and `compatibility-integration-tests`. ### Testing & Reproduction steps See these jobs broken in CI and then see them work with this PR. --------- Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> * Add ingress gateway deprecation notices to docs (#18102) ### Description This adds notices, that ingress gateway is deprecated, to several places in the product docs where ingress gateway is the topic. ### Testing & Reproduction steps Tested with a local copy of the website. ### Links Deprecation of ingress gateway was announced in the Release Notes for Consul 1.16 and Consul-K8s 1.2. See: [https://developer.hashicorp.com/consul/docs/release-notes/consul/v1_16_x#what-s-deprecated](https://developer.hashicorp.com/consul/docs/release-notes/consul/v1_16_x#what-s-deprecated ) [https://developer.hashicorp.com/consul/docs/release-notes/consul-k8s/v1_2_x#what-s-deprecated](https://developer.hashicorp.com/consul/docs/release-notes/consul-k8s/v1_2_x#what-s-deprecated) ### PR Checklist * [N/A] updated test coverage * [X] external facing docs updated * [X] appropriate backport labels added * [X] not a security concern --------- Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * Add docs for jwt cluster configuration (#18004) ### Description  - Add jwt-provider docs for jwks cluster configuration. The configuration was added here: https://github.com/hashicorp/consul/pull/17978 * Docs: fix unmatched bracket for health checks page (#18134) * NET-4657/add resource service client (#18053) ### Description  Dan had already started on this [task](https://github.com/hashicorp/consul/pull/17849) which is needed to start building the HTTP APIs. This just needed some cleanup to get it ready for review. Overview: - Rename `internalResourceServiceClient` to `insecureResourceServiceClient` for name consistency - Configure a `secureResourceServiceClient` with auth enabled ### PR Checklist * [ ] ~updated test coverage~ * [ ] ~external facing docs updated~ * [x] appropriate backport labels added * [ ] ~not a security concern~ * Fix bug with Vault CA provider (#18112) Updating RootPKIPath but not IntermediatePKIPath would not update leaf signing certs with the new root. Unsure if this happens in practice but manual testing showed it is a bug that would break mesh and agent connections once the old root is pruned. * [NET-4897] net/http host header is now verified and request.host that contains socked now error (#18129) ### Description This is related to https://github.com/hashicorp/consul/pull/18124 where we pinned the go versions in CI to 1.20.5 and 1.19.10. go 1.20.6 and 1.19.11 now validate request host headers for validity, including the hostname cannot be prefixed with slashes. For local communications (npipe://, unix://), the hostname is not used, but we need valid and meaningful hostname. Prior versions go Go would clean the host header, and strip slashes in the process, but go1.20.6 and go1.19.11 no longer do, and reject the host header. Around the community we are seeing that others are intercepting the req.host and if it starts with a slash or ends with .sock, they changing the host to localhost or another dummy value. [client: define a "dummy" hostname to use for local connections by thaJeztah · Pull Request #45942 · moby/moby](https://github.com/moby/moby/pull/45942) ### Testing & Reproduction steps Check CI tests. ### Links * [ ] updated test coverage * [ ] external facing docs updated * [ ] appropriate backport labels added * [ ] not a security concern * add a conditional around setting LANFilter.AllSegments to make sure it is valid (#18139) ### Description This is to correct a code problem because this assumes all segments, but when you get to Enterprise, you can be in partition that is not the default partition, in which case specifying all segments does not validate and fails. This is to correct the setting of this filter with `AllSegments` to `true` to only occur when in the the `default` partition. ### Testing & Reproduction steps  ### Links  ### PR Checklist * [ ] updated test coverage * [ ] external facing docs updated * [ ] appropriate backport labels added * [ ] not a security concern * chore: bump upgrade integrations tests to 1.15, 116 [NET-4743] (#18130) * re org resource type registry (#18133) * fix: update delegateMock used in ENT (#18149) ### Description  The mock is used in `http_ent_test` file which caused lint failures. For OSS->ENT parity adding the same change here. ### Links  Identified in OSS->ENT [merge PR](https://github.com/hashicorp/consul-enterprise/pull/6328) ### PR Checklist * [ ] ~updated test coverage~ * [ ] ~external facing docs updated~ * [x] appropriate backport labels added * [ ] ~not a security concern~ * Use JWT-auth filter in metadata mode & Delegate validation to RBAC filter (#18062) ### Description  - Currently the jwt-auth filter doesn't take into account the service identity when validating jwt-auth, it only takes into account the path and jwt provider during validation. This causes issues when multiple source intentions restrict access to an endpoint with different JWT providers. - To fix these issues, rather than use the JWT auth filter for validation, we use it in metadata mode and allow it to forward the successful validated JWT token payload to the RBAC filter which will make the decisions. This PR ensures requests with and without JWT tokens successfully go through the jwt-authn filter. The filter however only forwards the data for successful/valid tokens. On the RBAC filter level, we check the payload for claims and token issuer + existing rbac rules. ### Testing & Reproduction steps  - This test covers a multi level jwt requirements (requirements at top level and permissions level). It also assumes you have envoy running, you have a redis and a sidecar proxy service registered, and have a way to generate jwks with jwt. I mostly use: https://www.scottbrady91.com/tools/jwt for this. - first write your proxy defaults ``` Kind = "proxy-defaults" name = "global" config { protocol = "http" } ``` - Create two providers ``` Kind = "jwt-provider" Name = "auth0" Issuer = "https://ronald.local" JSONWebKeySet = { Local = { JWKS = "eyJrZXlzIjog....." } } ``` ``` Kind = "jwt-provider" Name = "okta" Issuer = "https://ronald.local" JSONWebKeySet = { Local = { JWKS = "eyJrZXlzIjogW3...." } } ``` - add a service intention ``` Kind = "service-intentions" Name = "redis" JWT = { Providers = [ { Name = "okta" }, ] } Sources = [ { Name = "*" Permissions = [{ Action = "allow" HTTP = { PathPrefix = "/workspace" } JWT = { Providers = [ { Name = "okta" VerifyClaims = [ { Path = ["aud"] Value = "my_client_app" }, { Path = ["sub"] Value = "5be86359073c434bad2da3932222dabe" } ] }, ] } }, { Action = "allow" HTTP = { PathPrefix = "/" } JWT = { Providers = [ { Name = "auth0" }, ] } }] } ] ``` - generate 3 jwt tokens: 1 from auth0 jwks, 1 from okta jwks with different claims than `/workspace` expects and 1 with correct claims - connect to your envoy (change service and address as needed) to view logs and potential errors. You can add: `-- --log-level debug` to see what data is being forwarded ``` consul connect envoy -sidecar-for redis1 -grpc-addr 127.0.0.1:8502 ``` - Make the following requests: ``` curl -s -H "Authorization: Bearer $Auth0_TOKEN" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v RBAC filter denied curl -s -H "Authorization: Bearer $Okta_TOKEN_with_wrong_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v RBAC filter denied curl -s -H "Authorization: Bearer $Okta_TOKEN_with_correct_claims" --insecure --cert leaf.cert --key leaf.key --cacert connect-ca.pem https://localhost:20000/workspace -v Successful request ``` ### TODO * [x] Update test coverage * [ ] update integration tests (follow-up PR) * [x] appropriate backport labels added * Support Consul Connect Envoy Command on Windows (#17694) ### Description Add support for consul connect envoy command on windows. This PR fixes the comments of PR - https://github.com/hashicorp/consul/pull/15114 ### Testing * Built consul.exe from this branch on windows and hosted here - [AWS S3](https://asheshvidyut-bucket.s3.ap-southeast-2.amazonaws.com/consul.zip) * Updated the [tutorial](https://developer.hashicorp.com/consul/tutorials/developer-mesh/consul-windows-workloads) and changed the `consul_url.default` value to [AWS S3](https://asheshvidyut-bucket.s3.ap-southeast-2.amazonaws.com/consul.zip) * Followed the steps in the tutorial and verified that everything is working as described. ### PR Checklist * [x] updated test coverage * [ ] external facing docs updated * [x] appropriate backport labels added * [x] not a security concern --------- Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com> Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com> Co-authored-by: Jose Ignacio Lorenzo <joseignaciolorenzo85@gmail.com> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> * Change docs to say 168h instead of 7d for server_rejoin_age_max (#18154) ### Description Addresses https://github.com/hashicorp/consul/pull/17171#issuecomment-1636930705 * [OSS] test: improve xDS listener code coverage (#18138) test: improve xDS listener code coverage * Re-order expected/actual for assertContainerState in consul container tests (#18157) Re-order expected/actual, consul container tests * group and document make file (#17943) * group and document make file * Add `testing/deployer` (neé `consul-topology`) [NET-4610] (#17823) Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: R.B. Boyer <rb@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> * [NET-4792] Add integrations tests for jwt-auth (#18169) * Add FIPS reference to consul enterprise docs (#18028) * Add FIPS reference to consul enterprise docs * Update website/content/docs/enterprise/index.mdx Co-authored-by: David Yu <dyu@hashicorp.com> * remove support for ecs client (fips) --------- Co-authored-by: David Yu <dyu@hashicorp.com> * add peering_commontopo tests [NET-3700] (#17951) Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: R.B. Boyer <rb@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Co-authored-by: NiniOak <anita.akaeze@hashicorp.com> * docs - remove Sentinel from enterprise features list (#18176) * Update index.mdx * Update kv.mdx * Update docs-nav-data.json * delete sentinel.mdx * Update redirects.js --------- Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com> * [NET-4865] Bump golang.org/x/net to 0.12.0 (#18186) Bump golang.org/x/net to 0.12.0 While not necessary to directly address CVE-2023-29406 (which should be handled by using a patched version of Go when building), an accompanying change to HTTP/2 error handling does impact agent code. See https://go-review.googlesource.com/c/net/+/506995 for the HTTP/2 change. Bump this dependency across our submodules as well for the sake of potential indirect consumers of `x/net/http`. * Call resource mutate hook before validate hook (NET-4907) (#18178) * [NET-4865] security: Update Go version to 1.20.6 (#18190) Update Go version to 1.20.6 This resolves [CVE-2023-29406] (https://nvd.nist.gov/vuln/detail/CVE-2023-29406) for uses of the `net/http` standard library. Note that until the follow-up to #18124 is done, the version of Go used in those impacted tests will need to remain on 1.20.5. * Improve XDS test coverage: JWT auth edition (#18183) * Improve XDS test coverage: JWT auth edition more tests * test: xds coverage for jwt listeners --------- Co-authored-by: DanStough <dan.stough@hashicorp.com> * update readme.md (#18191) u[date readme.md * Update submodules to latest following 1.16.0 (#18197) Align all our internal use of submodules on the latest versions. * SEC-090: Automated trusted workflow pinning (2023-07-18) (#18174) Result of tsccr-helper -log-level=info -pin-all-workflows . Co-authored-by: hashicorp-tsccr[bot] <hashicorp-tsccr[bot]@users.noreply.github.com> * Fix Backport Assistant PR commenting (#18200) * Fix Backport Assistant failure PR commenting For general comments on a PR, it looks like you have to use the `/issue` endpoint rather than `/pulls`, which requires commit/other review-specific target details. This matches the endpoint used in `backport-reminder.yml`. * Remove Backport Reminder workflow This is noisy (even when adding multiple labels, individual comments per label are generated), and likely no longer needed: we haven't had this work in a long time due to an expired GH token, and we now have better automation for backport PR assignment. * resource: Pass resource to Write ACL hook instead of just resource Id [NET-4908] (#18192) * Explicitly enable WebSocket upgrades (#18150) This PR explicitly enables WebSocket upgrades in Envoy's UpgradeConfig for all proxy types. (API Gateway, Ingress, and Sidecar.) Fixes #8283 * docs: fix the description of client rpc (#18206) * NET-4804: Add dashboard for monitoring consul-k8s (#18208) * [OSS] Improve xDS Code Coverage - Clusters (#18165) test: improve xDS cluster code coverage * NET-4222 take config file consul container (#18218) Net 4222 take config file consul container * Envoy Integration Test Windows (#18007) * [CONSUL-395] Update check_hostport and Usage (#40) * [CONSUL-397] Copy envoy binary from Image (#41) * [CONSUL-382] Support openssl in unique test dockerfile (#43) * [CONSUL-405] Add bats to single container (#44) * [CONSUL-414] Run Prometheus Test Cases and Validate Changes (#46) * [CONSUL-410] Run Jaeger in Single container (#45) * [CONSUL-412] Run test-sds-server in single container (#48) * [CONSUL-408] Clean containers (#47) * [CONSUL-384] Rebase and sync fork (#50) * [CONSUL-415] Create Scenarios Troubleshooting Docs (#49) * [CONSUL-417] Update Docs Single Container (#51) * [CONSUL-428] Add Socat to single container (#54) * [CONSUL-424] Replace pkill in kill_envoy function (#52) * [CONSUL-434] Modify Docker run functions in Helper script (#53) * [CONSUL-435] Replace docker run in set_ttl_check_state & wait_for_agent_service_register functions (#55) * [CONSUL-438] Add netcat (nc) in the Single container Dockerfile (#56) * [CONSUL-429] Replace Docker run with Docker exec (#57) * [CONSUL-436] Curl timeout and run tests (#58) * [CONSUL-443] Create dogstatsd Function (#59) * [CONSUL-431] Update Docs Netcat (#60) * [CONSUL-439] Parse nc Command in function (#61) * [CONSUL-463] Review curl Exec and get_ca_root Func (#63) * [CONSUL-453] Docker hostname in Helper functions (#64) * [CONSUL-461] Test wipe volumes without extra cont (#66) * [CONSUL-454] Check ports in the Server and Agent containers (#65) * [CONSUL-441] Update windows dockerfile with version (#62) * [CONSUL-466] Review case-grpc Failing Test (#67) * [CONSUL-494] Review case-cfg-resolver-svc-failover (#68) * [CONSUL-496] Replace docker_wget & docker_curl (#69) * [CONSUL-499] Cleanup Scripts - Remove nanoserver (#70) * [CONSUL-500] Update Troubleshooting Docs (#72) * [CONSUL-502] Pull & Tag Envoy Windows Image (#73) * [CONSUL-504] Replace docker run in docker_consul (#76) * [CONSUL-505] Change admin_bind * [CONSUL-399] Update envoy to 1.23.1 (#78) * [CONSUL-510] Support case-wanfed-gw on Windows (#79) * [CONSUL-506] Update troubleshooting Documentation (#80) * [CONSUL-512] Review debug_dump_volumes Function (#81) * [CONSUL-514] Add zipkin to Docker Image (#82) * [CONSUL-515] Update Documentation (#83) * [CONSUL-529] Support case-consul-exec (#86) * [CONSUL-530] Update Documentation (#87) * [CONSUL-530] Update default consul version 1.13.3 * [CONSUL-539] Cleanup (#91) * [CONSUL-546] Scripts Clean-up (#92) * [CONSUL-491] Support admin_access_log_path value for Windows (#71) * [CONSUL-519] Implement mkfifo Alternative (#84) * [CONSUL-542] Create OS Specific Files for Envoy Package (#88) * [CONSUL-543] Create exec_supported.go (#89) * [CONSUL-544] Test and Build Changes (#90) * Implement os.DevNull * using mmap instead of disk files * fix import in exec-unix * fix nmap open too many arguemtn * go fmt on file * changelog file * fix go mod * Update .changelog/17694.txt Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> * different mmap library * fix bootstrap json * some fixes * chocolatey version fix and image fix * using different library * fix Map funciton call * fix mmap call * fix tcp dump * fix tcp dump * windows tcp dump * Fix docker run * fix tests * fix go mod * fix version 16.0 * fix version * fix version dev * sleep to debug * fix sleep * fix permission issue * fix permission issue * fix permission issue * fix command * fix command * fix funciton * fix assert config entry status command not found * fix command not found assert_cert_has_cn * fix command not found assert_upstream_missing * fix command not found assert_upstream_missing_once * fix command not found get_upstream_endpoint * fix command not found get_envoy_public_listener_once * fix command not found * fix test cases * windows integration test workflow github * made code similar to unix using npipe * fix go.mod * fix dialing of npipe * dont wait * check size of written json * fix undefined n * running * fix dep * fix syntax error * fix workflow file * windows runner * fix runner * fix from json * fix runs on * merge connect envoy * fix cin path * build * fix file name * fix file name * fix dev build * remove unwanted code * fix upload * fix bin name * fix path * checkout current branch * fix path * fix tests * fix shell bash for windows sh files * fix permission of run-test.sh * removed docker dev * added shell bash for tests * fix tag * fix win=true * fix cd * added dev * fix variable undefined * removed failing tests * fix tcp dump image * fix curl * fix curl * tcp dump path * fix tcpdump path * fix curl * fix curl install * stop removing intermediate containers * fix tcpdump docker image * revert -rm * --rm=false * makeing docker image before * fix tcpdump * removed case consul exec * removed terminating gateway simple * comment case wasm * removed data dog * comment out upload coverage * uncomment case-consul-exec * comment case consul exec * if always * logs * using consul 1.17.0 * fix quotes * revert quotes * redirect to dev null * Revert version * revert consul connect * fix version * removed envoy connect * not using function * change log * docker logs * fix logs * restructure bad authz * rmeoved dev null * output * fix file descriptor * fix cacert * fix cacert * fix ca cert * cacert does not work in windows curl * fix func * removed docker logs * added sleep * fix tls * commented case-consul-exec * removed echo * retry docker consul * fix upload bin * uncomment consul exec * copying consul.exe to docker image * copy fix * fix paths * fix path * github workspace path * latest version * Revert "latest version" This reverts commit 5a7d7b82d9e7553bcb01b02557ec8969f9deba1d. * commented consul exec * added ssl revoke best effort * revert best effort * removed unused files * rename var name and change dir * windows runner * permission * needs setup fix * swtich to github runner * fix file path * fix path * fix path * fix path * fix path * fix path * fix build paths * fix tag * nightly runs * added matrix in github workflow, renamed files * fix job * fix matrix * removed brackes * from json * without using job matrix * fix quotes * revert job matrix * fix workflow * fix comment * added comment * nightly runs * removed datadog ci as it is already measured in linux one * running test * Revert "running test" This reverts commit 7013d15a23732179d18ec5d17336e16b26fab5d4. * pr comment fixes * running test now * running subset of test * running subset of test * job matrix * shell bash * removed bash shell * linux machine for job matrix * fix output * added cat to debug * using ubuntu latest * fix job matrix * fix win true * fix go test * revert job matrix --------- Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com> Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com> Co-authored-by: Ivan K Berlot <ivanberlot@gmail.com> Co-authored-by: Ezequiel Fernández Ponce <20102608+ezfepo@users.noreply.github.com> Co-authored-by: joselo85 <joseignaciolorenzo85@gmail.com> Co-authored-by: Ezequiel Fernández Ponce <ezequiel.fernandez@southworks.com> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> * fix typos and update ecs compat table (#18215) * fix typos and update ecs compat table * real info for the ecs compat matrix table * Update website/content/docs/ecs/compatibility.mdx Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> --------- Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> * [OSS] proxystate: add proxystate protos (#18216) * proxystate: add proxystate protos to pbmesh and resolve imports and conflicts between message names * ci: don't verify s390x (#18224) * [CC-5718] Remove HCP token requirement during bootstrap (#18140) * [CC-5718] Remove HCP token requirement during bootstrap * Re-add error for loading HCP management token * Remove old comment * Add changelog entry * Remove extra validation line * Apply suggestions from code review Co-authored-by: lornasong <lornasong@users.noreply.github.com> --------- Co-authored-by: lornasong <lornasong@users.noreply.github.com> * [NET-4122] Doc guidance for federation with externalServers (#18207) Doc guidance for federation with externalServers Add guidance for proper configuration when joining to a secondary cluster using WAN fed with external servers also enabled. Also clarify federation requirements and fix formatting for an unrelated value. Update both the Helm chart reference (synced from `consul-k8s`, see hashicorp/consul-k8s#2583) and the docs on using `externalServers`. * [OSS] Improve xDS Code Coverage - Endpoints and Misc (#18222) test: improve xDS endpoints code coverage * Clarify license reporting timing and GDPR compliance (#18237) Add Alicia's edits to clarify log timing and other details * Fix Github Workflow File (#18241) * [CONSUL-382] Support openssl in unique test dockerfile (#43) * [CONSUL-405] Add bats to single container (#44) * [CONSUL-414] Run Prometheus Test Cases and Validate Changes (#46) * [CONSUL-410] Run Jaeger in Single container (#45) * [CONSUL-412] Run test-sds-server in single container (#48) * [CONSUL-408] Clean containers (#47) * [CONSUL-384] Rebase and sync fork (#50) * [CONSUL-415] Create Scenarios Troubleshooting Docs (#49) * [CONSUL-417] Update Docs Single Container (#51) * [CONSUL-428] Add Socat to single container (#54) * [CONSUL-424] Replace pkill in kill_envoy function (#52) * [CONSUL-434] Modify Docker run functions in Helper script (#53) * [CONSUL-435] Replace docker run in set_ttl_check_state & wait_for_agent_service_register functions (#55) * [CONSUL-438] Add netcat (nc) in the Single container Dockerfile (#56) * [CONSUL-429] Replace Docker run with Docker exec (#57) * [CONSUL-436] Curl timeout and run tests (#58) * [CONSUL-443] Create dogstatsd Function (#59) * [CONSUL-431] Update Docs Netcat (#60) * [CONSUL-439] Parse nc Command in function (#61) * [CONSUL-463] Review curl Exec and get_ca_root Func (#63) * [CONSUL-453] Docker hostname in Helper functions (#64) * [CONSUL-461] Test wipe volumes without extra cont (#66) * [CONSUL-454] Check ports in the Server and Agent containers (#65) * [CONSUL-441] Update windows dockerfile with version (#62) * [CONSUL-466] Review case-grpc Failing Test (#67) * [CONSUL-494] Review case-cfg-resolver-svc-failover (#68) * [CONSUL-496] Replace docker_wget & docker_curl (#69) * [CONSUL-499] Cleanup Scripts - Remove nanoserver (#70) * [CONSUL-500] Update Troubleshooting Docs (#72) * [CONSUL-502] Pull & Tag Envoy Windows Image (#73) * [CONSUL-504] Replace docker run in docker_consul (#76) * [CONSUL-505] Change admin_bind * [CONSUL-399] Update envoy to 1.23.1 (#78) * [CONSUL-510] Support case-wanfed-gw on Windows (#79) * [CONSUL-506] Update troubleshooting Documentation (#80) * [CONSUL-512] Review debug_dump_volumes Function (#81) * [CONSUL-514] Add zipkin to Docker Image (#82) * [CONSUL-515] Update Documentation (#83) * [CONSUL-529] Support case-consul-exec (#86) * [CONSUL-530] Update Documentation (#87) * [CONSUL-530] Update default consul version 1.13.3 * [CONSUL-539] Cleanup (#91) * [CONSUL-546] Scripts Clean-up (#92) * [CONSUL-491] Support admin_access_log_path value for Windows (#71) * [CONSUL-519] Implement mkfifo Alternative (#84) * [CONSUL-542] Create OS Specific Files for Envoy Package (#88) * [CONSUL-543] Create exec_supported.go (#89) * [CONSUL-544] Test and Build Changes (#90) * Implement os.DevNull * using mmap instead of disk files * fix import in exec-unix * fix nmap open too many arguemtn * go fmt on file * changelog file * fix go mod * Update .changelog/17694.txt Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> * different mmap library * fix bootstrap json * some fixes * chocolatey version fix and image fix * using different library * fix Map funciton call * fix mmap call * fix tcp dump * fix tcp dump * windows tcp dump * Fix docker run * fix tests * fix go mod * fix version 16.0 * fix version * fix version dev * sleep to debug * fix sleep * fix permission issue * fix permission issue * fix permission issue * fix command * fix command * fix funciton * fix assert config entry status command not found * fix command not found assert_cert_has_cn * fix command not found assert_upstream_missing * fix command not found assert_upstream_missing_once * fix command not found get_upstream_endpoint * fix command not found get_envoy_public_listener_once * fix command not found * fix test cases * windows integration test workflow github * made code similar to unix using npipe * fix go.mod * fix dialing of npipe * dont wait * check size of written json * fix undefined n * running * fix dep * fix syntax error * fix workflow file * windows runner * fix runner * fix from json * fix runs on * merge connect envoy * fix cin path * build * fix file name * fix file name * fix dev build * remove unwanted code * fix upload * fix bin name * fix path * checkout current branch * fix path * fix tests * fix shell bash for windows sh files * fix permission of run-test.sh * removed docker dev * added shell bash for tests * fix tag * fix win=true * fix cd * added dev * fix variable undefined * removed failing tests * fix tcp dump image * fix curl * fix curl * tcp dump path * fix tcpdump path * fix curl * fix curl install * stop removing intermediate containers * fix tcpdump docker image * revert -rm * --rm=false * makeing docker image before * fix tcpdump * removed case consul exec * removed terminating gateway simple * comment case wasm * removed data dog * comment out upload coverage * uncomment case-consul-exec * comment case consul exec * if always * logs * using consul 1.17.0 * fix quotes * revert quotes * redirect to dev null * Revert version * revert consul connect * fix version * removed envoy connect * not using function * change log * docker logs * fix logs * restructure bad authz * rmeoved dev null * output * fix file descriptor * fix cacert * fix cacert * fix ca cert * cacert does not work in windows curl * fix func * removed docker logs * added sleep * fix tls * commented case-consul-exec * removed echo * retry docker consul * fix upload bin * uncomment consul exec * copying consul.exe to docker image * copy fix * fix paths * fix path * github workspace path * latest version * Revert "latest version" This reverts commit 5a7d7b82d9e7553bcb01b02557ec8969f9deba1d. * commented consul exec * added ssl revoke best effort * revert best effort * removed unused files * rename var name and change dir * windows runner * permission * needs setup fix * swtich to github runner * fix file path * fix path * fix path * fix path * fix path * fix path * fix build paths * fix tag * nightly runs * added matrix in github workflow, renamed files * fix job * fix matrix * removed brackes * from json * without using job matrix * fix quotes * revert job matrix * fix workflow * fix comment * added comment * nightly runs * removed datadog ci as it is already measured in linux one * running test * Revert "running test" This reverts commit 7013d15a23732179d18ec5d17336e16b26fab5d4. * pr comment fixes * running test now * running subset of test * running subset of test * job matrix * shell bash * removed bash shell * linux machine for job matrix * fix output * added cat to debug * using ubuntu latest * fix job matrix * fix win true * fix go test * revert job matrix * Fix tests --------- Co-authored-by: Ivan K Berlot <ivanberlot@gmail.com> Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com> Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com> Co-authored-by: Ezequiel Fernández Ponce <20102608+ezfepo@users.noreply.github.com> Co-authored-by: joselo85 <joseignaciolorenzo85@gmail.com> Co-authored-by: Ezequiel Fernández Ponce <ezequiel.fernandez@southworks.com> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> * NET-4996 - filter go-tests and test-integration workflows from running on docs only and ui only changes (#18236) * Align build arch matrix with enterprise (#18235) Ensure that OSS remains in sync w/ Enterprise by aligning the format of arch matrix args for various build jobs. * Revert "NET-4996 - filter go-tests and test-integration workflows from running on docs only and ui only changes" (#18248) Revert "NET-4996 - filter go-tests and test-integration workflows from running on docs only and ui only changes (#18236)" This reverts commit a11dba710e6ce6f172c0fa6c9b61567cc1efffc8. * resource: Add scope to resource type registration [NET-4976] (#18214) Enables querying a resource type's registration to determine if a resource is cluster, partition, or partition and namespace scoped. * Fix some inconsistencies in jwt docs (#18234) * NET-1825: More new ACL token creation docs (#18063) Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * grafana: add the panel resource usage of connect injector (#18247) * [NET-3700] Backfill changelog entry for c2bbe67 and 7402d06 (#18259) Backfill changelog entry for c2bbe67 and 7402d06 Add a changelog entry for the follow-up PR since it was specific to the fix and references the original change. * NET-4897 - update comment to include the current issue url from the go team. (#18263) * fix typos, style, and improper links (#18269) * member cli: add -filter expression to flags (#18223) * member cli: add -filter expression to flags * changelog * update doc * Add test cases * use quote * go-tests: disable s390x (#18273) * docs: Update ext-authz documentation for kubernetes (#18281) Update ext-authz documentation for kubernetes * docs: Consul on Kubernetes specific upgrade info (#18230) * Compatibility page - dataplanes mention * Upgrading higher-level dataplane mention * `exec=` string callout * More visible for upgrade page * Apply suggestions from code review Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com> --------- Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com> Co-authored-by: John Murret <john.murret@hashicorp.com> * Fix typo in Envoy extensions doc (#18284) * docs: K8s secondary DC requirements (#18280) * Requested edit * Apply suggestions from code review Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> --------- Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * api-gateway: subscribe to bound-api-gateway only after receiving api-gateway (#18291) * api-gateway: subscribe to bound-api-gateway only after receiving api-gateway This fixes a race condition due to our dependency on having the listener(s) from the api-gateway config entry in order to fully and properly process the resources on the bound-api-gateway config entry. * Apply suggestions from code review * Add changelog entry * Update K8s changelog to address cloud auto-join change in 1.0.0 (#18293) * Update list of Envoy versions (#18300) Update supported envoy versions to 1.24.10, 1.25.9, 1.26.4, 1.27.0. * [NET-4904] Update list of Envoy versions in docs (#18306) Update list of Envoy versions in docs Update supported Envoy versions across Consul release versions. * Update actions for TSCCR (#18317) Update action versions before deadline * Fix topology view when displaying mixed connect-native/normal services. (#13023) * Fix topoloy intention with mixed connect-native/normal services. If a service is registered twice, once with connect-native and once without, the topology views would prune the existing intentions. This change brings the code more in line with the transparent proxy behavior. * Dedupe nodes in the ServiceTopology ui endpoint (like done with tags). * Consider a service connect-native as soon as one instance is. * Stop JWT provider from being written in non default namespace (#18325) * docs: Fix some comments (#17118) Signed-off-by: cui fliter <imcusg@gmail.com> * [NET-4703] Prevent partial application of Envoy extensions (#18068) Prevent partial application of Envoy extensions Ensure that non-required extensions do not change xDS resources before exiting on failure by cloning proto messages prior to applying each extension. To support this change, also move `CanApply` checks up a layer and make them prior to attempting extension application, s.t. we avoid unnecessary copies where extensions can't be applied. Last, ensure that we do not allow panics from `CanApply` or `Extend` checks to escape the attempted extension application. * docs: Simplify example jq commands by removing pipes (#18327) Simplify jq command examples by removing pipes to other commands. * fix typo in create a mesh token docs (#18337) * [CC-5719] Add support for builtin global-read-only policy (#18319) * [CC-5719] Add support for builtin global-read-only policy * Add changelog * Add read-only to docs * Fix some minor issues. * Change from ReplaceAll to Sprintf * Change IsValidPolicy name to return an error instead of bool * Fix PolicyList test * Fix other tests * Apply suggestions from code review Co-authored-by: Paul Glass <pglass@hashicorp.com> * Fix state store test for policy list. * Fix naming issues * Update acl/validation.go Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> * Update agent/consul/acl_endpoint.go --------- Co-authored-by: Paul Glass <pglass@hashicorp.com> Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> * [NET-5121] proxystate: move protos to subdirectory to avoid conflicts (#18335) * also makes a few protos updates * resource: adding various helpers for working with resources (#18342) This is a bit of a grab bag of helpers that I found useful for working with them when authoring substantial Controllers. Subsequent PRs will make use of them. * Wasm integration tests for local and remote wasm files (#17756) * wasm integration tests for local and remote wasm files refactoring and cleanup for wasm testing remove wasm debug logging PR feedback, wasm build lock correct path pattern for wasm build files Add new helper function to minimize changes to existing test code Remove extra param mod tidy add custom service setup to test lib add wait until static server sidecar can reach nginx sidecar Doc comments PR feedback Update workflows to compile wasm for integration tests Fix docker build path Fix package name for linter Update makefile, fix redeclared function Update expected wasm filename Debug test ls in workflow remove pwd in favor of relative path more debugging Build wasm in compatability tests as well Build wasm directly in ci rather than in container Debug tinygo and llvm version Change wasm file extension Remove tinygo debugging Remove extra comments * Add compiled wasm and build instructions * [HCP Telemetry] Periodic Refresh for Dynamic Telemetry Configuration (#18168) * OTElExporter now uses an EndpointProvider to discover the endpoint * OTELSink uses a ConfigProvider to obtain filters and labels configuration * improve tests for otel_sink * Regex logic is moved into client for a method on the TelemetryConfig object * Create a telemetry_config_provider and update deps to use it * Fix conversion * fix import newline * Add logger to hcp client and move telemetry_config out of the client.go file * Add a telemetry_config.go to refactor client.go * Update deps * update hcp deps test * Modify telemetry_config_providers * Check for nil filters * PR review updates * Fix comments and move around pieces * Fix comments * Remove context from client struct * Moved ctx out of sink struct and fixed filters, added a test * Remove named imports, use errors.New if not fformatting * Remove HCP dependencies in telemetry package * Add success metric and move lock only to grab the t.cfgHahs * Update hash * fix nits * Create an equals method and add tests * Improve telemetry_config_provider.go tests * Add race test * Add missing godoc * Remove mock for MetricsClient * Avoid goroutine test panics * trying to kick CI lint issues by upgrading mod * imprve test code and add hasher for testing * Use structure logging for filters, fix error constants, and default to allow all regex * removed hashin and modify logic to simplify * Improve race test and fix PR feedback by removing hash equals and avoid testing the timer.Ticker logic, and instead unit test * Ran make go-mod-tidy * Use errtypes in the test * Add changelog * add safety check for exporter endpoint * remove require.Contains by using error types, fix structure logging, and fix success metric typo in exporter * Fixed race test to have changing config values * Send success metric before modifying config * Avoid the defer and move the success metric under * NET-4240 - Snapshots are failing on Windows (#18302) * fix go mod * fix go sum * added change log * ran make go mod tidy * Register ProxyStateTemplate Resource (#18316) Also, change the ProxyState.id to identity. This is because we already have the id of this proxy from the resource, and this id should be name-aligned with the workload it represents. It should also have the owner ref set to the workload ID if we need that. And so the id field seems unnecessary. We do, however, need a reference to workload identity so that we can authorize the proxy when it initially connects to the xDS server. * [NET-5146] security: Update Go version to 1.20.7 and `x/net` to 0.13.0 (#18358) * Update Go version to 1.20.7 This resolves [CVE-2023-29409] (https://nvd.nist.gov/vuln/detail/CVE-2023-29409)(`crypto/tls`). * Bump golang.org/x/net to 0.13.0 Addresses [CVE-2023-3978](https://nvd.nist.gov/vuln/detail/CVE-2023-3978) for security scans (non-impacting). * mesh: adding the protobuf types and resources backing mesh config v2 (#18351) * [OSS] test: xds coverage for routes (#18369) test: xds coverage for routes * Fix policy lookup to allow for slashes (#18347) * Fix policy lookup to allow for slashes * Fix suggestions * Fix other test * Revert some lines * add some initial CODEOWNERS (#18346) * Add redirects for mesh-gateway docs (#18377) * expose grpc as http endpoint (#18221) expose resource grpc endpoints as http endpoints * bimapper: fix a bug and add some more test coverage (#18387) * [docs] Fix ServiceDefaults example in distributed tracing (#17212) Fix ServiceDefaults example in distributed tracing. * Fix #17730 - Dev mode has new line (#18367) * adding new line only in case of pretty in url not in dev mode * change log added * chore: make go-mod-tidy (#18388) * resource: Make resource read tenancy aware (#18397) * Not using chmod - fixed integration test for Enterprise (#18401) * Not using chmod * checking icacls * Removed push * replaced ordered list of rate limit ops with flow diagram (#18398) * replaced ordered list of rate limit ops with flow diagram * made diagram font bigger * updated colors for dark mode img * fixed typo * recentered dark mode image * Apply suggestions from code review Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> --------- Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * Upgrade test: remove outdated test and disable log due to verbosity (#18403) * remove outdated test * disable log since we have too many parallel tests * bump testcontainers-go from 0.22.0 and remove pinned go version in in… (#18395) * bump testcontainers-go from 0.22.0 and remove pinned go version in integ test * go mod tidy * Replace deprecated target.Authority with target.URL.Host * Add ServiceEndpoints Mutation hook tests (#18404) * Add ServiceEndpoints Mutation hook tests * Move endpoint owner validation into the validation hook Also there were some minor changes to error validation to account for go-cmp not liking to peer through an errors.errorstring type that get created by errors.New * catalog: add FailoverPolicy mutation and validation hooks (#18390) Add most of the validation and mutation hooks for the FailoverPolicy resource. * NET-5115 Add retry + timeout filters for api-gateway (#18324) * squash, implement retry/timeout in consul core * update tests * catalog: adding a controller to reconcile FailoverPolicy resources (#18399) Add most of the semantic cross-resource validation for FailoverPolicy resources using a new controller. * fix the error in ent repo (#18421) fix the error in ent repo * build: updates for 1.16.1 release (#18415) * build: updates for 1.16.1 release * build: fix missing replace directive for envoyextensions * build: go mod tidy testing/deployer * update ECS links (#18419) * docs: fix incorrect proxy-defaults config in Lua Envoy extension (#18418) fix incorrect proxy-defaults config * resource: Make resource write tenancy aware (#18423) * [NET-5217] [OSS] Derive sidecar proxy locality from parent service (#18437) * Add logging to locality policy application In OSS, this is currently a no-op. * Inherit locality when registering sidecars When sidecar locality is not explicitly configured, inherit locality from the proxied service. * NET-4984: Update APIGW Config Entries for JWT Auth (#18366) * Added oss config entries for Policy and JWT on APIGW * Updated structs for config entry * Updated comments, ran deep-copy * Move JWT configuration into OSS file * Add in the config entry OSS file for jwts * Added changelog * fixing proto spacing * Moved to using manually written deep copy method * Use pointers for override/default fields in apigw config entries * Run gen scripts for changed types * k8s compat - Openshift versions (#18307) * Update compatibility.mdx Co-authored-by: trujillo-adam <47586768+trujillo-adam@users.noreply.github.com> * APIGW: Update HTTPRouteConfigEntry for JWT Auth (#18422) * Updated httproute config entry for JWT Filters * Added manual deepcopy method for httproute jwt filter * Fix test * Update JWTFilter to be in oss file * Add changelog * Add build tags for deepcopy oss file * [COMPLIANCE] License changes (#18443) * Adding explicit MPL license for sub-package This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository. * Adding explicit MPL license for sub-package This directory and its subdirectories (packages) contain files licensed with the MPLv2 `LICENSE` file in this directory and are intentionally licensed separately from the BSL `LICENSE` file at the root of this repository. * Updating the license from MPL to Business Source License Going forward, this project will be licensed under the Business Source License v1.1. Please see our blog post for more details at <Blog URL>, FAQ at www.hashicorp.com/licensing-faq, and details of the license at www.hashicorp.com/bsl. * add missing license headers * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 * Update copyright file headers to BUSL-1.1 --------- Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com> * Net-2708/delete resource endpoint (#18420) * feat: add http delete endpoint for resource service * refactor: clean up * Disable deep-copy codegen verification for now. (#18446) Once we figure out what to do with license headers for these files we should re-enable this check. * build: upgrade to latest buf v1.26.0 (#18426) * NET-4952 Add docs for export command (#18425) * Init file for services export command docs * Add link for export command to nav * Add export to list of subcommands for services * Add usage and basic command options * Add API options using includes * Add section for enterprise options * Include argument value in flag format * Add examples * Apply suggestions from code review Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> --------- Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * Net-2712/resource hcl parsing (#18250) * Initial protohcl implementation Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> * resourcehcl: implement resource decoding on top of protohcl Co-authored-by: Daniel Upton <daniel@floppy.co> * fix: resolve ci failures * test: add additional unmarshalling tests * refactor: update function test to clean protohcl package imports --------- Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> * read endpoint (#18268) implement http read endpoint to expose resource grpc service read method * Net-2707/list resource endpoint (#18444) feat: list resources endpoint * Fix incorrect yaml in examples (#18463) * NET-5187: Upgrade test timeout due to log producer errors (#18461) Stop log producer before restarting container * [NET-4799] [OSS] xdsv2: listeners L4 support for connect proxies (#18436) * refactor to avoid future import cycles * resource: Make resource list tenancy aware (#18475) * [COMPLIANCE] License update (#18479) Update BUSL LICENSE to include licensed product and version. Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com> * docs: specify manual server metadata intervention (#18477) * docs: Update OpenShift compatibility (#18478) Update compatibility.mdx * resource: Make resource delete tenancy aware (#18476) resource: Make resource delete tenancy awarae * Add license-checker action that fails when any backported file contains BUSL header (#18485) * Add license-checker action that fails when any backported file contains BUSL header * Quote echoed variable to retain line breaks * Add ticket to reference for more details * docs: Update K8s TGW tutorial to reliably obtain role ID (#18474) The `grep` command used to obtain the ID for the terminating gateway role is not reliable in all scenarios. For example, if there is a similarly named role, the command may return the wrong role ID for the active terminating gateway instance. This commit updates the command to use jq to obtain the role ID. If multiple roles are found, jq will raise an error informing the user that it cannot reliably determine the role ID. * NET-5371 License checker pt2 (#18491) * Update grep command to work on ubuntu * Run license checker when new commits are pushed to PR * README - Update KV use case to Dynamic App Configuration (#18301) * Update README.md * Update kv.mdx * Add BUSL badge * README - re-order badges and update hub link (#18498) Update README.md * [NET-5163] Support locality testing in consul-container (#18484) * Support locality testing in consul-container Support including locality in client sidecar config. Also align test config structs with Ent to avoid future conflicts. * Refactor consul-container fortio helpers Refactor fortio test helpers to separate HTTP retries from waiting on fortio result changes due to e.g. service startup and failovers. * NET-4853 - xds v2 - implement base connect proxy functionality for clusters (#18499) * Fix HCL (#18513) * Fix HCL * Update create-sameness-groups.mdx * NET-4932 - xds v2 - implement base connect proxy functionality for endpoints (#18500) * NET-4853 - xds v2 - implement base connect proxy functionality for clusters * NET-4853 - xds v2 - implement base connect proxy functionality for clusters * NET-4932 - xds v2 - implement base connect proxy functionality for endpoints * Update endpoints_test.go * gofmt * Update naming.go * Support custom watches on controller (#18439) * Support custom watches on controller * refactor mapper methods * NET-4858 - xds v2 - implement base connect proxy functionality for routes (#18501) * NET-4853 - xds v2 - implement base connect proxy functionality for clusters * NET-4853 - xds v2 - implement base connect proxy functionality for clusters * NET-4932 - xds v2 - implement base connect proxy functionality for endpoints * Update endpoints_test.go * gofmt * NET-4858 - Make connect proxy route tests pass using xds v2 * Update endpoints_test.go * Update naming.go * use alsoRunTestForV2 * remove unused makeAddress * gofmt * fixing clusters * bimapper: allow to untrack links and support reference or id (#18451) * bimapper: fix data race (#18519) * CI Split integration tests to run nightly and every PR (#18518) * CI Split integration tests to run nightly and every PR * Checkout release branch for nightly test * Fix broken links caught in weekly report (#18522) * fix broken link caught in weekly report * Apply suggestions from code review Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> --------- Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * Create nightly test-integration for consul release branch (#18530) * Create nightly test-integration for consul release branch * test * fix * docs: Fix spelling errors across various pages on the site (#18533) This commit fixes numerous spelling errors across the site and also removes unnecessary whitespace that was present in the edited files. * Make proto-public license MPL (#18531) * Make proto-public license MPL * Add proto-public dir to exclusion list in .copywrite.hcl * NET-4943 - Implement ProxyTracker (#18535) * resource: Make resource watchlist tenancy aware (#18539) * Reduce required type arguments for DecodedResource (#18540) * OSS -> CE (community edition) changes (#18517) * CI: fix envoy versions in CI of release branch (#18538) * CI: fix envoy versions in CI of release branch * - remove steps sds for 1.15 nightly run - checkout the release branch * add default name * fix * Update go-tests.yml * fix checkout code * add comments and revert schedule * catalog: add failover mode enum validation (#18545) * mesh: add validation for the new pbmesh resources (#18410) Adds validation for HTTPRoute, GRPCRoute, TCPRoute, DestinationPolicy, and ComputedRoutes. * xds controller: resolve ServiceEndpoints references in ProxyStateTemp… (#18544) xds controller: resolve ServiceEndpoints references in ProxyStateTemplate * mesh: adding type aliases for mesh resource usage (#18448) Introduces some simple type aliases for DecodedResource[*X] wrappers for each type which cut down on the verbosity * Update trust bundle into proxy-state-template (#18550) * catalog: validating Protocol and Health enums on Service, Workload, and ServiceEndpoints (#18554) * chore: fix missing/incorrect license headers (#18555) * fix for , non presence of consul-version meta (#18464) * fix for #18406 , non presence of consul-version meta * removed redundant checks * updated mock-api to mimic api response for synthetic nodes * added test to test getDistinctConsulVersions method with synthetic-node case * updated typo in comments * added change log * feat: add experiments flag to testserver sdk (#18541) * bug: prevent go routine leakage due to existing DeferCheck (#18558) * bug: prevent go routine leakage due to existing DeferCheck * add changelog * NET-5382 & PLAT-1159: Do not trigger workflow if only doc files are in commit history (#18528) NET-5382: Do not run workflow runs if at least one path matches * UI: community verbiage (#18560) * chore: update community verbiage * chore: add changelog entry * Fix Windows FIPS Build (#18357) * Fix Windows FIPS Build * create new file for windows arm * removed build tag * fix buidl tags * fix multiple go build * CE port of enterprise extension (#18572) CE commit * resource: Make resource listbyowner tenancy aware (#18566) * NET-5147: Added placeholder structs for JWT functionality (#18575) * Added placeholder structs for JWT functionality * Added watches for CE vs ENT * Add license header * Undo plumbing work * Add context arg * resource: Make resource writestatus tenancy aware (#18577) * NET-5338 - NET-5338 - Run a v2 mode xds server (#18579) * NET-5338 - NET-5338 - Run a v2 mode xds server * fix linting * CI: send slack notification on failed nightly job (#18578) * CE commit (#18583) * Fix broken link on sameness group page (#18511) fix broken link * Fix typo in permissive mTLS docs (#18551) Update onboarding-tproxy-mode.mdx * Set concurrency for workflows (#18567) * Set concurrency for workflows * test: run automated tests against Vault 1.11 - 1.14 (#18590) Begin to test against Vault 1.14. Drop tests against Vault 1.10. * Reduce the frequency of metric exports to minutely (#18584) * NET-4944 - wire up controllers with proxy tracker (#18603) Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com> * Watch the ProxyTracker from xDS controller (#18611) * Distinguish v2 catalog Protocol unset from default (#18612) Even though we intend to default to TCP when this field is not explicitly provided, uncluding an `UNSPECIFIED` default enum value allows us to create inheritance chains, e.g. service to workload. * Added OpenTelemetry Access Logging Envoy extension (#18336) * [HCP Telemetry] Move first TelemetryConfig Fetch into the TelemetryConfigProvider (#18318) * Add Enabler interface to turn sink on/off * Use h for hcpProviderImpl vars, fix PR feeback and fix errors * Keep nil check in exporter and fix tests * Clarify comment and fix function name * Use disable instead of enable * Fix errors nit in otlp_transform * Add test for refreshInterval of updateConfig * Add disabled field in MetricsConfig struct * Fix PR feedback: improve comment and remove double colons * Fix deps test which requires a maybe * Update hcp-sdk-go to v0.61.0 * use disabled flag in telemetry_config.go * Handle 4XX errors in telemetry_provider * Fix deps test * Check 4XX instead * Run make go-mod-tidy * update comments and docs about running envoy integration tests with the ENVOY_VERSION set. (#18614) update ENVOY_VERSION and documentation of it used in the bats envoy tests. Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com> * first commit; reformat PD conf entry * updated proxies overview page * added Deploy SM proxy usage and removed reg index * moved sidecar proxy usage to main proxy folder * recast sidecar reg page as Deploy sidecar services * backport of commit 1ab22a78f305097b469573e51c8a161e0d46449b * backport of commit 8903c8ce936b1a46ee1a0a43d55b6de3612d85cf * backport of commit 67e332826daa44cf736f711ac83af1cc38ab84e5 * backport of commit 3345473c10ea65d7925fcd3bce04384b18ecfd59 * backport of commit d838e5de9eb7a87ef961a4f7a447e7bbd92def6c * backport of commit a1c35174cccd0f24e1c8f3c5563cc28f5e5d8bff * backport of commit 066079064991055d890354e89aeb8276ef4c57c8 * backport of commit baae1ed358f5b79acc30ed9890d5ecd2ab6d4b43 * backport of commit ef186faf8978035e0e60c6fd68a274c969c73d49 * Reformat proxy docs refresh (#18623) * first commit; reformat PD conf entry * updated proxies overview page * added Deploy SM proxy usage and removed reg index * moved sidecar proxy usage to main proxy folder * recast sidecar reg page as Deploy sidecar services * fix typos * recast SM reg as conf reference- set the sidebar * add redirects * fix links * add PD conf entry usage to appropro pages * edits to proxy conf ref * fix links on index page * example command to write PD conf entry * updated links to old SM proxy reg page * updated links to sidecar service reg page * tryna fix front matter issues * Apply suggestions from code review Co-authored-by: Ronald <roncodingenthusiast@users.noreply.github.com> * added paragraph about SM proxies to overivew * Apply suggestions from code review Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> --------- Co-authored-by: Ronald <roncodingenthusiast@users.noreply.github.com> Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> * resolve merge conflicts * fix error in merge conflict * fix error in merge conflict --------- Signed-off-by: josh <josh.timmons@hashicorp.com> Signed-off-by: cui fliter <imcusg@gmail.com> Co-authored-by: Samantha <hello@entropy.cat> Co-authored-by: David Yu <dyu@hashicorp.com> Co-authored-by: John Murret <john.murret@hashicorp.com> Co-authored-by: Ranjandas <thejranjan@gmail.com> Co-authored-by: John Maguire <john.maguire@hashicorp.com> Co-authored-by: Ronald <roncodingenthusiast@users.noreply.github.com> Co-authored-by: Dan Bond <danbond@protonmail.com> Co-authored-by: Derek Menteer <105233703+hashi-derek@users.noreply.github.com> Co-authored-by: Ashesh Vidyut <134911583+absolutelightning@users.noreply.github.com> Co-authored-by: Tu Nguyen <im2nguyen@users.noreply.github.com> Co-authored-by: Chris S. Kim <ckim@hashicorp.com> Co-authored-by: wangxinyi7 <121973291+wangxinyi7@users.noreply.github.com> Co-authored-by: Chris Thain <32781396+cthain@users.noreply.github.com> Co-authored-by: Jeff Boruszak <104028618+boruszak@users.noreply.github.com> Co-authored-by: Nathan Coleman <nathan.coleman@hashicorp.com> Co-authored-by: Evan Phoenix <evan@phx.io> Co-authored-by: Poonam Jadhav <poonam.jadhav@hashicorp.com> Co-authored-by: Dan Stough <dan.stough@hashicorp.com> Co-authored-by: Michael Hofer <karras@users.noreply.github.com> Co-authored-by: J.C. Jones <james.jc.jones@gmail.com> Co-authored-by: Fulvio <fulviodenza823@gmail.com> Co-authored-by: Krastin Krastev <krastin@hashicorp.com> Co-authored-by: Joshua Timmons <josh.timmons@hashicorp.com> Co-authored-by: david3a <49253132+david3a@users.noreply.github.com> Co-authored-by: Curt Bushko <cbushko@gmail.com> Co-authored-by: Nick Irvine <115657443+nfi-hashicorp@users.noreply.github.com> Co-authored-by: Tom Davies <tom@t-davies.com> Co-authored-by: Luke Kysow <1034429+lkysow@users.noreply.github.com> Co-authored-by: Vijay <vijayraghav22@gmail.com> Co-authored-by: Jared Kirschner <85913323+jkirschner-hashicorp@users.noreply.github.com> Co-authored-by: Eddie Rowe <74205376+eddie-rowe@users.noreply.github.com> Co-authored-by: emilymianeil <eneil@hashicorp.com> Co-authored-by: nv-hashi <80716011+nv-hashi@users.noreply.github.com> Co-authored-by: Iryna Shustava <ishustava@users.noreply.github.com> Co-authored-by: Jeff Apple <79924108+Jeff-Apple@users.noreply.github.com> Co-authored-by: cskh <hui.kang@hashicorp.com> Co-authored-by: Franco Bruno Lavayen <cocolavayen@gmail.com> Co-authored-by: Jose Ignacio Lorenzo <74208929+joselo85@users.noreply.github.com> Co-authored-by: Jose Ignacio Lorenzo <joseignaciolorenzo85@gmail.com> Co-authored-by: Dhia Ayachi <dhia@hashicorp.com> Co-authored-by: R.B. Boyer <4903+rboyer@users.noreply.github.com> Co-authored-by: R.B. Boyer <rb@hashicorp.com> Co-authored-by: Freddy <freddygv@users.noreply.github.com> Co-authored-by: NiniOak <anita.akaeze@hashicorp.com> Co-authored-by: Michael Zalimeni <michael.zalimeni@hashicorp.com> Co-authored-by: Semir Patel <semir.patel@hashicorp.com> Co-authored-by: hashicorp-tsccr[bot] <129506189+hashicorp-tsccr[bot]@users.noreply.github.com> Co-authored-by: hashicorp-tsccr[bot] <hashicorp-tsccr[bot]@users.noreply.github.com> Co-authored-by: Blake Covarrubias <blake@covarrubi.as> Co-authored-by: Ivan K Berlot <ivanberlot@gmail.com> Co-authored-by: Ezequiel Fernández Ponce <20102608+ezfepo@users.noreply.github.com> Co-authored-by: Ezequiel Fernández Ponce <ezequiel.fernandez@southworks.com> Co-authored-by: Nitya Dhanushkodi <nitya@hashicorp.com> Co-authored-by: Jeremy Jacobson <jjacobson93@users.noreply.github.com> Co-authored-by: lornasong <lornasong@users.noreply.github.com> Co-authored-by: Judith Malnick <judith@hashicorp.com> Co-authored-by: Paul Glass <pglass@hashicorp.com> Co-authored-by: Gautam <gautambaghel93@gmail.com> Co-authored-by: Florian Apolloner <florian@apolloner.eu> Co-authored-by: cui fliter <imcusg@gmail.com> Co-authored-by: John Landa <jonathanlanda@gmail.com> Co-authored-by: Ashvitha <ashvitha.sridharan@hashicorp.com> Co-authored-by: Andrea Scarpino <andrea@scarpino.dev> Co-authored-by: Matt Keeler <mkeeler@users.noreply.github.com> Co-authored-by: sarahalsmiller <100602640+sarahalsmiller@users.noreply.github.com> Co-authored-by: Gerard Nguyen <gerard@hashicorp.com> Co-authored-by: hashicorp-copywrite[bot] <110428419+hashicorp-copywrite[bot]@users.noreply.github.com> Co-authored-by: Daniel Upton <daniel@floppy.co> Co-authored-by: Ashwin Venkatesh <ashwin@hashicorp.com> Co-authored-by: Natalie Smith <nataliemegans@gmail.com> Co-authored-by: github-team-consul-core <github-team-consul-core@hashicorp.com> Co-authored-by: Hardik Shingala <34568645+hdkshingala@users.noreply.github.com> Co-authored-by: Tu Nguyen <im2nguyen@gmail.com>
2023-09-07 10:24:33 -07:00 · 2023-09-07 10:24:33 -07:00 · 612e7e2ff3
parent 706af48947
commit 612e7e2ff3
28 changed files with 139 additions and 145 deletions
--- a/website/content/api-docs/agent/service.mdx
+++ b/website/content/api-docs/agent/service.mdx
@ -639,7 +639,7 @@ The `/agent/service/register` endpoint supports camel case and _snake case_ for

 - `Proxy` `(Proxy: nil)` - From 1.2.3 on, specifies the configuration for a
  service mesh proxy instance. This is only valid if `Kind` defines a proxy or gateway.
-  See the [Proxy documentation](/consul/docs/connect/registration/service-registration)
+  Refer to the [Service mesh proxy configuration reference](/consul/docs/connect/proxies/proxy-config-reference)
  for full details.

 - `Connect` `(Connect: nil)` - Specifies the
@ -698,8 +698,8 @@ For the `Connect` field, the parameters are:
  Managed proxies (which have been deprecated since Consul v1.3.0) have been 
  [removed](/consul/docs/connect/proxies) since v1.6.0.
 - `SidecarService` `(ServiceDefinition: nil)` - Specifies an optional nested
-  service definition to register. For more information see
-  [Sidecar Service Registration](/consul/docs/connect/registration/sidecar-service).
+  service definition to register. Refer to 
+  [Deploy sidecar services](/consul/docs/connect/proxies/deploy-sidecar-services) for additional information.

 ### Sample Payload

--- a/website/content/api-docs/discovery-chain.mdx
+++ b/website/content/api-docs/discovery-chain.mdx
@ -57,10 +57,8 @@ The table below shows this endpoint's support for
 - `compile-dc` `(string: "")` - Specifies the datacenter to use as the basis of
  compilation. This will default to the datacenter of the agent being queried.

-  This value comes from an [upstream
-  configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
-  [`datacenter`](/consul/docs/connect/registration/service-registration#datacenter)
-  parameter.
+  This value comes from the `datacenter` parameter in an [upstream
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference).

 - `ns` `(string: "")` <EnterpriseAlert inline /> - Specifies the source namespace you use as the basis of compilation.
  You can also [specify the namespace through other methods](#methods-to-specify-namespace).
@ -71,11 +69,8 @@ The table below shows this endpoint's support for
  timeout](/consul/docs/connect/config-entries/service-resolver#connecttimeout) for
  any service resolved in the compiled chain.

-  This value comes from the `connect_timeout_ms` key in an [upstream
-  configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
-  opaque
-  [`config`](/consul/docs/connect/registration/service-registration#config-1)
-  parameter.
+  This value comes from the `connect_timeout_ms` key in the opaque `config` field of the [upstream
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference).

 - `OverrideProtocol` `(string: "")` - Overrides the final
  [protocol](/consul/docs/connect/config-entries/service-defaults#protocol) used in
@ -86,23 +81,17 @@ The table below shows this endpoint's support for
  would be L7 and TCP is passed here the chain will not include Routers or
  Splitters.

-  This value comes from the `protocol` key in an [upstream
-  configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
-  opaque
-  [`config`](/consul/docs/connect/registration/service-registration#config-1)
-  parameter.
+  This value comes from the `protocol` key in an opaque `config` field of the [upstream
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference).

 - `OverrideMeshGateway` `(MeshGatewayConfig: <optional>)` - Overrides the final
  [mesh gateway configuration](/consul/docs/connect/gateways/mesh-gateway#connect-proxy-configuration)
  for this any service resolved in the compiled chain.

-  This value comes from either the [proxy
-  configuration](/consul/docs/connect/registration/service-registration#complete-configuration-example)
-  [`mesh_gateway`](/consul/docs/connect/registration/service-registration#mesh_gateway)
-  parameter or an [upstream
-  configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
-  [`mesh_gateway`](/consul/docs/connect/registration/service-registration#mesh_gateway-1)
-  parameter. If both are present the value defined on the upstream is used.
+  This value comes from the `mesh_gateway` parameter in either the [proxy
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#proxy-parameters) or [upstream
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference)
+  If both parameters are configured, Consul uses the value defined on the upstream.

  - `Mode` `(string: "")` - One of `none`, `local`, or `remote`.

--- a/website/content/commands/connect/envoy.mdx
+++ b/website/content/commands/connect/envoy.mdx
@ -36,7 +36,7 @@ Usage: `consul connect envoy [options] [-- pass-through options]`

 #### Envoy Options for both Sidecars and Gateways

- `-proxy-id` - The [proxy service](/consul/docs/connect/registration/service-registration) ID.
+- `-proxy-id` - The [proxy service](/consul/docs/connect/proxies/proxy-config-reference) ID.
  This service ID must already be registered with the local agent unless a gateway is being
  registered with the `-register` flag. As of Consul 1.8.0, this can also be
  specified via the `CONNECT_PROXY_ID` environment variable.
@ -133,7 +133,7 @@ compatibility with Envoy and prevent potential issues. Default is `false`.
 - `-sidecar-for` - The _ID_ (not name if they differ) of the service instance
  this proxy will represent. The target service doesn't need to exist on the
  local agent yet but a [sidecar proxy
-  registration](/consul/docs/connect/registration/service-registration) with
+  registration](/consul/docs/proxies/deploy-sidecar-services) with
  `proxy.destination_service_id` equal to the passed value must be present. If
  multiple proxy registrations targeting the same local service instance are
  present the command will error and `-proxy-id` should be used instead.
@ -225,9 +225,9 @@ proxy configuration needed.

 ## Examples

-Assume a local service instance is registered on the local agent with a
+In the following examples, a local service instance is registered on the local agent with a
 sidecar proxy (using the [sidecar service
-registration](/consul/docs/connect/registration/service-registration) helper) as below.
+registration](/consul/docs/connect/proxies/deploy-sidecar-services) helper):

 ```hcl
 service {
--- a/website/content/commands/connect/proxy.mdx
+++ b/website/content/commands/connect/proxy.mdx
@ -24,14 +24,14 @@ Usage: `consul connect proxy [options]`
 - `-sidecar-for` - The _ID_ (not name if they differ) of the service instance
  this proxy will represent. The target service doesn't need to exist on the
  local agent yet but a [sidecar proxy
-  registration](/consul/docs/connect/registration/service-registration) with
+  registration](/consul/docs/connect/proxies/deploy-sidecar-services) with
  `proxy.destination_service_id` equal to the passed value must be present. If
  multiple proxy registrations targeting the same local service instance are
  present the command will error and `-proxy-id` should be used instead.
  This can also be specified via the `CONNECT_SIDECAR_FOR` environment variable.

 - `-proxy-id` - The [proxy
-  service](/consul/docs/connect/registration/service-registration) ID on the
+  service](/consul/docs/connect/proxies/proxy-config-reference) ID on the
  local agent. This must already be present on the local agent. This option
  can also be specified via the `CONNECT_PROXY_ID` environment variable.

--- a/website/content/commands/connect/redirect-traffic.mdx
+++ b/website/content/commands/connect/redirect-traffic.mdx
@ -38,7 +38,7 @@ Usage: `consul connect redirect-traffic [options]`

 - `-consul-dns-port` - The port of the Consul DNS resolver. If provided, DNS queries will be redirected to the provided IP address for name resolution.

- `-proxy-id` - The [proxy service](/consul/docs/connect/registration/service-registration) ID.
+- `-proxy-id` - The [proxy service](/consul/docs/connect/proxies/proxy-config-reference) ID.
  This service ID must already be registered with the local agent.

 - `-proxy-inbound-port` - The inbound port that the proxy is listening on.
--- a/website/content/docs/agent/config/config-files.mdx
+++ b/website/content/docs/agent/config/config-files.mdx
@ -637,16 +637,16 @@ Refer to the [formatting specification](https://golang.org/pkg/time/#ParseDurati
  - `server` ((#server_rpc_port)) - Server RPC address. Default 8300. TCP
    only.
  - `sidecar_min_port` ((#sidecar_min_port)) - Inclusive minimum port number
-    to use for automatically assigned [sidecar service registrations](/consul/docs/connect/registration/sidecar-service).
+    to use for automatically assigned [sidecar service registrations](/consul/docs/connect/proxies/deploy-sidecar-services).
    Default 21000. Set to `0` to disable automatic port assignment.
  - `sidecar_max_port` ((#sidecar_max_port)) - Inclusive maximum port number
-    to use for automatically assigned [sidecar service registrations](/consul/docs/connect/registration/sidecar-service).
+    to use for automatically assigned [sidecar service registrations](/consul/docs/connect/proxies/deploy-sidecar-services).
    Default 21255. Set to `0` to disable automatic port assignment.
  - `expose_min_port` ((#expose_min_port)) - Inclusive minimum port number
-    to use for automatically assigned [exposed check listeners](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference).
+    to use for automatically assigned [exposed check listeners](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference).
    Default 21500. Set to `0` to disable automatic port assignment.
  - `expose_max_port` ((#expose_max_port)) - Inclusive maximum port number
-    to use for automatically assigned [exposed check listeners](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference).
+    to use for automatically assigned [exposed check listeners](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference).
    Default 21755. Set to `0` to disable automatic port assignment.

 - `primary_datacenter` - This designates the datacenter
--- a/website/content/docs/connect/cluster-peering/tech-specs.mdx
+++ b/website/content/docs/connect/cluster-peering/tech-specs.mdx
@ -64,7 +64,7 @@ Refer to [mesh gateway modes](/consul/docs/connect/gateways/mesh-gateway#modes)

 The Envoy proxies that function as sidecars in your service mesh require configuration in order to properly route traffic to peers. Sidecar proxies are defined in the [service definition](/consul/docs/services/usage/define-services).

- Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and peer. Refer to the [`upstreams`](/consul/docs/connect/registration/service-registration#upstream-configuration-reference) documentation for details.
+- Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and peer. Refer to the [`upstreams`](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference) documentation for details.
 - The `proxy.upstreams.destination_name` parameter is always required.
 - The `proxy.upstreams.destination_peer` parameter must be configured to enable cross-cluster traffic.
 - The `proxy.upstream/destination_namespace` configuration is only necessary if the destination service is in a non-default namespace.
--- a/website/content/docs/connect/config-entries/proxy-defaults.mdx
+++ b/website/content/docs/connect/config-entries/proxy-defaults.mdx
@ -330,7 +330,7 @@ Specifies an arbitrary map of configuration values used by service mesh proxies.
 #### Values

 - Default: None
- Data type: Map of 
+- Data type: Map

 ### `EnvoyExtensions`

@ -339,7 +339,7 @@ Specifies a list of extensions that modify Envoy proxy configurations. Refer to
 #### Values

 - Default: None
- Data type: Map of containing the following fields:
+- Data type: List of maps containing the following fields:
   - `Name`
   - `Required`
   - `Arguments`
@ -371,7 +371,7 @@ Specifies a mode for how proxies direct inbound and outbound traffic. You can sp

 ### `TransparentProxy`

-Contains configurations for proxies that are running in transparent proxy mode. Refer to [Transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy) for additional information. 
+Contains configurations for proxies that are running in transparent proxy mode. This mode enables permissive mTLS for Consul so that you can use your Kubernetes cluster's DNS service instead of Consul DNS. Refer to [Transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy) for additional information. 

 #### Values

@ -385,7 +385,7 @@ The following table describes how to configure values in the `TransparentProxy`
 | Parameter | Description | Data type | Default |
 | ---       | ---         | ---       | ---     |
 | `OutboundListenerPort` | Specifies the port that the proxy listens on for outbound traffic. Outbound application traffic must be captured and redirected to this port. | Integer | `15001` |
-| `DialedDirectly` | Determines whether other proxies in transparent mode can directly dial this proxy instance's IP address. Proxies in transparent mode commonly dial upstreams at the [`virtual`](/consul/docs/services/configuration/services-configuration-reference#tagged_addresses-virtual) tagged address, which load balances across instances. Dialing individual instances can be helpful when sending requests to stateful services, such as database clusters with a leader. | Boolean | `false` |
+| `DialedDirectly` | Determines whether other proxies in transparent mode can directly dial this proxy instance's IP address. Proxies in transparent mode commonly dial upstreams at the [`virtual` tagged address](/consul/docs/services/configuration/services-configuration-reference#tagged_addresses-virtual), which load balances across instances. Dialing individual instances can be helpful when sending requests to stateful services, such as database clusters with a leader. | Boolean | `false` |

 ### `MutualTLSMode`

@ -431,14 +431,14 @@ Example use-cases include exposing the `/metrics` endpoint to a monitoring syste

 ### `Expose{}.Checks`

-Exposes all HTTP and gRPC checks registered with the agent when set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or Consul's [`advertise_addr`](/consul/docs/agent/config/config-files#advertise). The ports for the listeners are dynamically allocated from the agent's [`expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.
+Exposes all HTTP and gRPC checks registered with the agent when set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or the [Consul agent's `advertise_addr`](/consul/docs/agent/config/config-files#advertise). The ports for the listeners are dynamically allocated from the [agent's `expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.

-We recommend enabling the `Checks` configuration when a Consul client cannot reach registered services over localhost, such as when Consul agents run in their own pods in Kubernetes.
+We recommend enabling the `Checks` configuration when a Consul client cannot reach registered services over localhost.

 #### Values

 - Default: `false`
- Data type: boolean
+- Data type: Boolean

 ### `Expose{}.Paths[]`

@ -447,7 +447,7 @@ Specifies a list of configuration maps that define paths to expose through Envoy
 #### Values

 - Default: None
- Data type: List of maps. 
+- Data type: List of maps 

 The following table describes the parameters for each map you can define in the list:

@ -496,7 +496,7 @@ The following table describes the parameters you can define in the `AccessLogs`

 <Tab heading="YAML" group="yaml">

-### apiVersion
+### `apiVersion`

 Specifies the verion of the Consul API to use to apply the configuration entry. This must be set to `consul.hashicorp.com/v1alpha1`.

@ -571,7 +571,7 @@ Specifies a list of extensions that modify Envoy proxy configurations. Refer to
 #### Values

 - Default: None
- Data type: Map of containing the following fields:
+- Data type: List of maps of containing the following fields:
   - `name`
   - `required`
   - `arguments`
@ -593,6 +593,7 @@ The following table describes how to configure values in the `EnvoyExtensions` m
 Specifies a mode for how proxies direct inbound and outbound traffic. You can specify one of the following values:

 - `transparent`: In transparent mode, proxies capture and redirect inbound and outbound traffic. The mode does not enable traffic redirection, but directs Consul to configure Envoy as if traffic is already being redirected. 
+
 - `direct`: In this mode, the local application and other proxies must directly dial proxy listeners. 

 #### Values
@ -602,7 +603,7 @@ Specifies a mode for how proxies direct inbound and outbound traffic. You can sp

 ### `spec.transparentProxy`

-Contains configurations for proxies that are running in transparent proxy mode. Refer to [Transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy) for additional information. 
+Contains configurations for proxies that are running in transparent proxy mode. This mode enables permissive mTLS for Consul so that you can use your Kubernetes cluster's DNS service instead of Consul DNS. Refer to [Transparent proxy mode](/consul/docs/k8s/connect/transparent-proxy) for additional information. 

 #### Values

@ -616,7 +617,7 @@ The following table describes how to configure values in the `TransparentProxy`
 | Parameter | Description | Data type | Default |
 | ---       | ---         | ---       | ---     |
 | `outboundListenerPort` | Specifies the port that the proxy listens on for outbound traffic. Outbound application traffic must be captured and redirected to this port. | Integer | `15001` |
-| `dialedDirectly` | Determines whether other proxies in transparent mode can directly dial this proxy instance's IP address. Proxies in transparent mode commonly dial upstreams at the [`virtual`](/consul/docs/services/configuration/services-configuration-reference#tagged_addresses-virtual) tagged address, which load balances across instances. Dialing individual instances can be helpful when sending requests to stateful services, such as database clusters with a leader. | Boolean | `false` |
+| `dialedDirectly` | Determines whether other proxies in transparent mode can directly dial this proxy instance's IP address. Proxies in transparent mode commonly dial upstreams at the [`virtual` tagged address](/consul/docs/services/configuration/services-configuration-reference#tagged_addresses-virtual), which load balances across instances. Dialing individual instances can be helpful when sending requests to stateful services, such as database clusters with a leader. | Boolean | `false` |

 ### `spec.mutualTLSMode`

@ -662,14 +663,14 @@ Example use-cases include exposing the `/metrics` endpoint to a monitoring syste

 ### `spec.expose{}.checks`

-Exposes all HTTP and gRPC checks registered with the agent when set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or Consul's [`advertise_addr`](/consul/docs/agent/config/config-files#advertise). The ports for the listeners are dynamically allocated from the agent's [`expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.
+Exposes all HTTP and gRPC checks registered with the agent when set to `true`. Envoy exposes listeners for the checks and only accepts connections originating from localhost or the [Consul agent's `advertise_addr`](/consul/docs/agent/config/config-files#advertise). The ports for the listeners are dynamically allocated from the [agent's `expose_min_port`](/consul/docs/agent/config/config-files#expose_min_port) and [`expose_max_port`](/consul/docs/agent/config/config-files#expose_max_port) configurations.

 We recommend enabling the `Checks` configuration when a Consul client cannot reach registered services over localhost, such as when Consul agents run in their own pods in Kubernetes.

 #### Values

 - Default: `false`
- Data type: boolean
+- Data type: Boolean

 ### `spec.expose{}.paths[]`

@ -723,6 +724,7 @@ The following table describes the parameters you can define in the `accessLogs`
 | `jsonFormat` | Specifies a JSON-formatted string that represents the format for each emitted access log. You can use [Envoy command operators](https://www.envoyproxy.io/docs/envoy/latest/configuration/observability/access_log/usage#command-operators) to customize the emitted data. You can also nest data. You cannot set this field and the `textFormat` field concurrently. | String | [Default log format](/consul/docs/connect/observability/access-logs#default-log-format) |
 | `textFormat` | Specifies a  text-formatted string that represents the format for each emitted access log. You can use [Envoy command operators](https://www.envoyproxy.io/docs/envoy/latest/configuration/observability/access_log/usage#command-operators) to customize the emitted data. You can also nest data. You cannot set this field and the `jsonFormat` field concurrently. | String | None |

+
 </Tab>

 </Tabs>
@ -750,7 +752,7 @@ Config {

 #### Consul Enterprise

-For Consul Enterprise, you can only create the configuration entry in the `default` namespace. The namepace configuration applies to proxies in all namespaces.
+When using multiple namespaces with Consul Enterprise, the only configuration entry that affects proxy defaults is the one in the `default` namespace. This configuration applies to proxies in all namespaces.

 ```hcl
 Kind      = "proxy-defaults"
@ -778,7 +780,7 @@ spec:

 #### Consul Enterprise

-For Consul Enterprise, you can only create the configuration entry in the `default` namespace. The namepace configuration applies to proxies in all namespaces.
+When using multiple namespaces with Consul Enterprise, the only configuration entry that affects proxy defaults is the one in the `default` namespace. This configuration applies to proxies in all namespaces.

 ```yaml
 apiVersion: consul.hashicorp.com/v1alpha1
@ -808,7 +810,7 @@ spec:
 ```
 #### Consul Enterprise

-For Consul Enterprise, you can only create the configuration entry in the `default` namespace. The namepace configuration applies to proxies in all namespaces.
+When using multiple namespaces with Consul Enterprise, the only configuration entry that affects proxy defaults is the one in the `default` namespace. This configuration applies to proxies in all namespaces.

 ```json
 {
@ -875,7 +877,7 @@ spec:

 ### Access Logs

-The following example enables access logs for all proxies. efer to [access logs](/consul/docs/connect/observability/access-logs) for more detailed examples.
+The following example enables access logs for all proxies. Refer to [access logs](/consul/docs/connect/observability/access-logs) for more detailed examples.

 <Tabs>
 <Tab heading="HCL" group="hcl">
--- a/website/content/docs/connect/config-entries/service-defaults.mdx
+++ b/website/content/docs/connect/config-entries/service-defaults.mdx
@ -778,7 +778,7 @@ Specifies the TLS server name indication (SNI) when federating with an external

 ### `Expose`

-Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on localhost only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference) for additional information and example configurations.
+Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on `localhost` only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/proxies/proxy-config-reference#expose-paths-configuration-reference) for additional information and example configurations.

 - Default: none
 - Data type: map
@ -1198,7 +1198,7 @@ Specifies the TLS server name indication (SNI) when federating with an external

 ### `spec.expose`

-Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on localhost only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference) for additional information and example configurations.
+Specifies default configurations for exposing HTTP paths through Envoy. Exposing paths through Envoy enables services to listen on `localhost` only. Applications that are not Consul service mesh-enabled can still contact an HTTP endpoint. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference) for additional information and example configurations.

 #### Values

@ -2053,7 +2053,7 @@ represents a location outside the Consul cluster. Services can dial destinations
      name: 'Expose',
      type: 'ExposeConfig: <optional>',
      description: `Controls the default
-                      [expose path configuration](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference)
+                      [expose path configuration](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference)
                      for Envoy. Added in v1.6.2.<br><br>
                      Exposing paths through Envoy enables a service to protect itself by only listening on localhost, while still allowing
                      non-mesh-enabled applications to contact an HTTP endpoint.
--- a/website/content/docs/connect/configuration.mdx
+++ b/website/content/docs/connect/configuration.mdx
@ -78,7 +78,7 @@ needed for a secure deployment.
 ## Centralized proxy and service configuration

 If your network contains many instances of the same service and many colocated sidecar proxies, you can specify global settings for proxies or services in [Configuration Entries](/consul/docs/agent/config-entries). You can override the centralized configurations for individual proxy instances in their
-[sidecar service definitions](/consul/docs/connect/registration/sidecar-service),
+[sidecar service definitions](/consul/docs/connect/proxies/deploy-sidecar-services),
 and the default protocols for service instances in their [service
 definitions](/consul/docs/services/usage/define-services).

--- a/website/content/docs/connect/connect-internals.mdx
+++ b/website/content/docs/connect/connect-internals.mdx
@ -97,7 +97,7 @@ a long period of inactivity (3 days by default), the cache will empty itself.

 ## Connections Across Datacenters

-A sidecar proxy's [upstream configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
+A sidecar proxy's [upstream configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference)
 may specify an alternative datacenter or a prepared query that can address services
 in multiple datacenters (such as the [geo failover](/consul/tutorials/developer-discovery/automate-geo-failover) pattern).

--- a/website/content/docs/connect/distributed-tracing.mdx
+++ b/website/content/docs/connect/distributed-tracing.mdx
@ -145,9 +145,9 @@ spec:

 </CodeTabs>

-> **NOTE:** This example uses a [proxy defaults](/consul/docs/connect/config-entries/proxy-defaults) config entry which will apply to all proxies
-but you can also apply this config in the
-[proxy service registration](/consul/docs/connect/registration/service-registration#proxy-parameters) (not supported on Kubernetes).
+-> **NOTE:** This example uses a [proxy defaults](/consul/docs/connect/config-entries/proxy-defaults) configuration entry, which applies to all proxies,
+but you can also apply the configuration in the
+[`proxy` block of your service configuration](/consul/docs/connect/proxies/proxy-config-reference#proxy-parameters). The proxy service registration is not supported on Kubernetes.

 Within the config there are two keys you need to customize:

--- a/website/content/docs/connect/gateways/mesh-gateway/index.mdx
+++ b/website/content/docs/connect/gateways/mesh-gateway/index.mdx
@ -48,7 +48,7 @@ Sidecar proxies that do not send upstream traffic through a gateway are not affe
 Configure the following settings to register the mesh gateway as a service in Consul.

 * Specify `mesh-gateway` in the `kind` field to register the gateway with Consul.
-* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and datacenter. Refer to the [`upstreams` documentation](/consul/docs/connect/registration/service-registration#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.datacenter` must be configured to enable cross-datacenter traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
+* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and datacenter. Refer to the [`upstreams` documentation](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.datacenter` must be configured to enable cross-datacenter traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
 * Define the `Proxy.Config` settings using opaque parameters compatible with your proxy (i.e., Envoy). For Envoy, refer to the [Gateway Options](/consul/docs/connect/proxies/envoy#gateway-options) and [Escape-hatch Overrides](/consul/docs/connect/proxies/envoy#escape-hatch-overrides) documentation for additional configuration information.
 * If ACLs are enabled, a token granting `service:write` for the gateway's service name and `service:read` for all services in the datacenter or partition must be added to the gateway's service definition. These permissions authorize the token to route communications for other Consul service mesh services, but does not allow decrypting any of their communications.

@ -127,8 +127,8 @@ Name: web

 ### Enabling Gateways for a Service Instance

-The following [Proxy Service Registration](/consul/docs/connect/registration/service-registration)
-definition will enable gateways for the service instance in the `remote` mode.
+The following [proxy service configuration](/consul/docs/connect/proxies/deploy-service-mesh-proxies)
+ enables gateways for the service instance in the `remote` mode.

 <CodeTabs heading="Example: Enabling gateways for a service instance.">

--- a/website/content/docs/connect/gateways/mesh-gateway/service-to-service-traffic-partitions.mdx
+++ b/website/content/docs/connect/gateways/mesh-gateway/service-to-service-traffic-partitions.mdx
@ -43,7 +43,7 @@ Sidecar proxies that do not send upstream traffic through a gateway are not affe
 Configure the following settings to register the mesh gateway as a service in Consul.

 * Specify `mesh-gateway` in the `kind` field to register the gateway with Consul.
-* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and partition. Refer to the [`upstreams` documentation](/consul/docs/connect/registration/service-registration#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.destination_partition` must be configured to enable cross-partition traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
+* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and partition. Refer to the [`upstreams` documentation](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.destination_partition` must be configured to enable cross-partition traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
 * Configure the `exported-services` configuration entry to enable Consul to export services contained in an admin partition to one or more additional partitions. Refer to the [Exported Services documentation](/consul/docs/connect/config-entries/exported-services) for details.
 * Define the `Proxy.Config` settings using opaque parameters compatible with your proxy, i.e., Envoy. For Envoy, refer to the [Gateway Options](/consul/docs/connect/proxies/envoy#gateway-options) and [Escape-hatch Overrides](/consul/docs/connect/proxies/envoy#escape-hatch-overrides) documentation for additional configuration information.
 * If ACLs are enabled, a token granting `service:write` for the gateway's service name and `service:read` for all services in the datacenter or partition must be added to the gateway's service definition. These permissions authorize the token to route communications for other Consul service mesh services, but does not allow decrypting any of their communications.
@ -121,8 +121,8 @@ Name: web

 ### Enabling Gateways for a Service Instance

-The following [Proxy Service Registration](/consul/docs/connect/registration/service-registration)
-definition will enable gateways for `web` service instances in the `finance` partition.
+The following [proxy service configuration](/consul/docs/connect/proxies/deploy-service-mesh-proxies)
+enables gateways for `web` service instances in the `finance` partition.

 <CodeTabs heading="Example: Enabling gateways for a service instance.">

--- a/website/content/docs/connect/gateways/mesh-gateway/service-to-service-traffic-wan-datacenters.mdx
+++ b/website/content/docs/connect/gateways/mesh-gateway/service-to-service-traffic-wan-datacenters.mdx
@ -57,7 +57,7 @@ Sidecar proxies that do not send upstream traffic through a gateway are not affe
 Configure the following settings to register the mesh gateway as a service in Consul.

 * Specify `mesh-gateway` in the `kind` field to register the gateway with Consul.
-* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and datacenter. Refer to the [`upstreams` documentation](/consul/docs/connect/registration/service-registration#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.datacenter` must be configured to enable cross-datacenter traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
+* Configure the `proxy.upstreams` parameters to route traffic to the correct service, namespace, and datacenter. Refer to the [`upstreams` documentation](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference) for details. The service `proxy.upstreams.destination_name` is always required. The `proxy.upstreams.datacenter` must be configured to enable cross-datacenter traffic. The `proxy.upstreams.destination_namespace` configuration is only necessary if the destination service is in a different namespace.
 * Define the `Proxy.Config` settings using opaque parameters compatible with your proxy (i.e., Envoy). For Envoy, refer to the [Gateway Options](/consul/docs/connect/proxies/envoy#gateway-options) and [Escape-hatch Overrides](/consul/docs/connect/proxies/envoy#escape-hatch-overrides) documentation for additional configuration information.
 * If ACLs are enabled, a token granting `service:write` for the gateway's service name and `service:read` for all services in the datacenter or partition must be added to the gateway's service definition. These permissions authorize the token to route communications for other Consul service mesh services, but does not allow decrypting any of their communications.

@ -137,8 +137,8 @@ Name: web

 ### Enabling Gateways for a Service Instance

-The following [Proxy Service Registration](/consul/docs/connect/registration/service-registration)
-definition will enable gateways for the service instance in the `remote` mode.
+The following [proxy service configuration](/consul/docs/connect/proxies/deploy-service-mesh-proxies)
+enables gateways for the service instance in the `remote` mode.

 <CodeTabs heading="Example: Enabling gateways for a service instance.">

--- a/website/content/docs/connect/l7-traffic/discovery-chain.mdx
+++ b/website/content/docs/connect/l7-traffic/discovery-chain.mdx
@ -59,11 +59,10 @@ various configuration entries interact in more complex ways. For example:
  [`proxy-defaults`](/consul/docs/connect/config-entries/proxy-defaults) config
  entry. Violations must be rejected as invalid.

- If an [upstream
-  configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
-  [`datacenter`](/consul/docs/connect/registration/service-registration#datacenter)
-  parameter is defined then any configuration entry that does not explicitly
-  refer to a desired datacenter should use that value from the upstream.
+- When an [upstream
+  configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference)
+  `datacenter` parameter is defined, any configuration entry that does not explicitly
+  refer to a desired datacenter uses the value defined in the upstream.

 ## Compilation

@ -80,9 +79,9 @@ API](/consul/api-docs/discovery-chain).
 - **Datacenter** - The datacenter to use as the basis of compilation.
 - **Overrides** - Discovery-time tweaks to apply when compiling. These should
  be derived from either the
-  [proxy](/consul/docs/connect/registration/service-registration#complete-configuration-example)
+  [proxy](/consul/docs/connect/proxies/proxy-config-reference#complete-configuration-example)
  or
-  [upstream](/consul/docs/connect/registration/service-registration#upstream-configuration-reference)
+  [upstream](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference)
  configurations if either are set.

 ### Compilation Results
--- a/website/content/docs/connect/observability/index.mdx
+++ b/website/content/docs/connect/observability/index.mdx
@ -44,7 +44,7 @@ Find other possible metrics syncs in the [Envoy documentation](/consul/docs/conn
 ### Service protocol

 You can specify the [`protocol`](/consul/docs/connect/config-entries/service-defaults#protocol)
-for all service instances in the `service-defaults` configuration entry. You can also override the default protocol when defining and registering proxies in a service definition file. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference) for additional information. 
+for all service instances in the `service-defaults` configuration entry. You can also override the default protocol when defining and registering proxies in a service definition file. Refer to [Expose Paths Configuration Reference](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference) for additional information. 

 By default, proxies only provide L4 metrics. 
 Defining the protocol allows proxies to handle requests at the L7
@ -54,5 +54,5 @@ load balancing and routing decisions.
 ### Service upstreams

 You can set the upstream for each service using the proxy's
-[`upstreams`](/consul/docs/connect/registration/service-registration#upstreams)
-sidecar parameter, which can be defined in a service's [sidecar registration](/consul/docs/connect/registration/sidecar-service).
+[`upstreams`](/consul/docs/connect/proxies/proxy-config-reference#upstreams)
+sidecar parameter, which can be defined in a service's [sidecar registration](/consul/docs/connect/proxies/deploy-sidecar-services).
--- a/website/content/docs/connect/proxies/built-in.mdx
+++ b/website/content/docs/connect/proxies/built-in.mdx
@ -77,7 +77,7 @@ All fields are optional with a reasonable default.
 - `upstreams`- **Deprecated** Upstreams are now specified
  in the `connect.proxy` definition. Upstreams specified in the opaque config map
  here will continue to work for compatibility but it's strongly recommended that
-  you move to using the higher level [upstream configuration](/consul/docs/connect/registration/service-registration#upstream-configuration-reference).
+  you move to using the higher level [upstream configuration](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference).

 ## Proxy Upstream Config Key Reference

--- a/website/content/docs/connect/proxies/deploy-service-mesh-proxies.mdx
+++ b/website/content/docs/connect/proxies/deploy-service-mesh-proxies.mdx
@ -7,7 +7,9 @@ description: >-

 # Deploy service mesh proxies services

-This topic describes how to create, register, and start service mesh proxies in Consul. Refer to [Service mesh proxies overview](/consul/docs/connect/proxies) for additional information about how proxies enable Consul functionalities. For information about deployed sidecar proxies, refer to [Deploy sidecar proxy services](/consul/docs/connect/proxies/deploy-sidecar-services).
+This topic describes how to create, register, and start service mesh proxies in Consul. Refer to [Service mesh proxies overview](/consul/docs/connect/proxies) for additional information about how proxies enable Consul functionalities. 
+
+For information about deploying proxies as sidecars for service instances, refer to [Deploy sidecar proxy services](/consul/docs/connect/proxies/deploy-sidecar-services).

 ## Overview

@ -16,21 +18,21 @@ Complete the following steps to deploy a service mesh proxy:
 1. It is not required, but you can create a proxy defaults configuration entry that contains global passthrough settings for all Envoy proxies. 
 1. Create a service definition file and specify the proxy configurations in the `proxy` block.
 1. Register the service using the API or CLI.
-1. Start the proxy service. 
+1. Start the proxy service. Proxies appear in the list of services registered to Consul, but they must be started before they begin to route traffic in your service mesh.

 ## Requirements

-If [ACLs](/consul/docs/security/acl) are enabled and you want to configure global Envoy settings in the [proxy defaults configuration entry](/consul/docs/connect/config-entries/proxy-defaults), you must present a token with `operator:write` permissions. Refer to [Create a service token](/consul/docs/security/acl/tokens/create/create-a-service-token) for additional information.
+If ACLs are enabled and you want to configure global Envoy settings using the [proxy defaults configuration entry](/consul/docs/connect/config-entries/proxy-defaults), you must present a token with `operator:write` permissions. Refer to [Create a service token](/consul/docs/security/acl/tokens/create/create-a-service-token) for additional information.

 ## Configure global Envoy passthrough settings

-If you want to define global passthrough settings for all Envoy proxies, create a proxy defaults configuration entry and specify default settings, such as access log configuration. [Service defaults configuration entries](/consul/docs/connect/config-entries/service-defaults) override proxy defaults and individual service configurations override both configuration entries.
+If you want to define global passthrough settings for all Envoy proxies, create a proxy defaults configuration entry and specify default settings, such as access log configuration. Note that [service defaults configuration entries](/consul/docs/connect/config-entries/service-defaults) override proxy defaults and individual service configurations override both configuration entries.

 1. Create a proxy defaults configuration entry and specify the following parameters:
   - `Kind`: Must be set to `proxy-defaults`
   - `Name`: Must be set to `global`
 1. Configure any additional settings you want to apply to all proxies. Refer to [Proxy defaults configuration entry reference](/consul/docs/connect/config-entries/proxy-defaults) for details about all settings available in the configuraiton entry. 
-1. Apply the configuration by either calling the [`/config` API endpoint](/consul/api-docs/config) or running the [`consul config write` CLI command](/consul/commands/config/write). The following example writes a proxy defaults configuration entry from a local HCL file using the CLI:
+1. Apply the configuration by either calling the [`/config` HTTP API endpoint](/consul/api-docs/config) or running the [`consul config write` CLI command](/consul/commands/config/write). The following example writes a proxy defaults configuration entry from a local HCL file using the CLI:

 ```shell-session
 $ consul config write proxy-defaults.hcl
--- a/website/content/docs/connect/proxies/deploy-sidecar-services.mdx
+++ b/website/content/docs/connect/proxies/deploy-sidecar-services.mdx
@ -7,7 +7,7 @@ description: >-

 # Deploy sidecar services

-This topic describes how to create, register, and start sidecar proxy services in Consul. Refer to [Service mesh proxies overview](/consul/docs/connect/proxies) for additional information about how proxies enable Consul functionalities. For information about deploying service mesh proxies, refer to [Deploy service mesh proxies](/consul/docs/connect/proxies/deploy-service-mesh-proxies).
+This topic describes how to create, register, and start sidecar proxy services in Consul. Refer to [Service mesh proxies overview](/consul/docs/connect/proxies) for additional information about how proxies enable Consul's functions and operations. For information about deploying service mesh proxies, refer to [Deploy service mesh proxies](/consul/docs/connect/proxies/deploy-service-mesh-proxies).

 ## Overview

@ -23,7 +23,7 @@ You can attach a sidecar proxy to a service you want to deploy to your mesh:

 ## Requirements

-If [ACLs](/consul/docs/security/acl) are enabled and you want to configure global Envoy settings in the [proxy defaults configuration entry](/consul/docs/connect/config-entries/proxy-defaults), you must present a token with `operator:write` permissions. Refer to [Create a service token](/consul/docs/security/acl/tokens/create/create-a-service-token) for additional information.
+If ACLs are enabled and you want to configure global Envoy settings in the [proxy defaults configuration entry](/consul/docs/connect/config-entries/proxy-defaults), you must present a token with `operator:write` permissions. Refer to [Create a service token](/consul/docs/security/acl/tokens/create/create-a-service-token) for additional information.

 ## Configure global Envoy passthrough settings

@ -43,9 +43,9 @@ $ consul config write proxy-defaults.hcl

 Create a service definition and configure the following fields: 

-1. Specify a name for the service you want to attach a sidecar proxy to in the `name` field. This field is required for all services you want to register in Consul.  
-1. Specify a port number where other services registered with Consul can discover and connect to the service in the `port` field. This field is required for all services you want to register in Consul.
-1. Set the `connect` field to `{ sidecar_service: {} }`. The `{ sidecar_service: {} }` value is a macro that applies a set of default configurations that enable you to quickly implement a sidecar. Refer to [Sidecar service defaults](#sidecar-service-defaults) for additional information.
+1. `name`: Specify a name for the service you want to attach a sidecar proxy to in the `name` field. This field is required for all services you want to register in Consul.  
+1. `port`: Specify a port number where other services registered with Consul can discover and connect to the service in the `port` field. This field is required for all services you want to register in Consul.
+1. `connect`: Set the `connect` field to `{ sidecar_service: {} }`. The `{ sidecar_service: {} }` value is a macro that applies a set of default configurations that enable you to quickly implement a sidecar. Refer to [Sidecar service defaults](#sidecar-service-defaults) for additional information.
 1. Configure any additional options for your service. Refer to [Services configuration reference](/consul/docs/services/configuration/services-configuration-reference) for details. 

 In the following example, a service named `web` is configured with a sidecar proxy:
@ -200,16 +200,16 @@ the `connect.sidecar_service` definition to customize the proxy registration.
 The "parent" service refers to the service definition that embeds the sidecar
 proxy.

- `id` - ID defaults to being `<parent-service-id>-sidecar-proxy`. This can't
+- `id` - ID defaults to `<parent-service-id>-sidecar-proxy`. This value cannot
  be overridden as it is used to [manage the lifecycle](#lifecycle) of the
  registration.
- `name` - Defaults to being `<parent-service-name>-sidecar-proxy`.
+- `name` - Defaults to `<parent-service-name>-sidecar-proxy`.
 - `tags` - Defaults to the tags of the parent service.
 - `meta` - Defaults to the service metadata of the parent service.
 - `port` - Defaults to being auto-assigned from a configurable
  range specified by [`sidecar_min_port`](/consul/docs/agent/config/config-files#sidecar_min_port)
  and [`sidecar_max_port`](/consul/docs/agent/config/config-files#sidecar_max_port).
- `kind` - Defaults to `connect-proxy`. This can't be overridden currently.
+- `kind` - Defaults to `connect-proxy`. This value cannot be overridden.
 - `check`, `checks` - By default we add a TCP check on the local address and
  port for the proxy, and a [service alias
  check](/consul/docs/services/usage/checks#alias-checks) for the parent service. If either
@ -221,7 +221,7 @@ proxy.

 ### Example with overwritten configurations

-In the following example, but the `sidecar_service` macro sets baselines configurations for the proxy, but the [proxy
+In the following example, the `sidecar_service` macro sets baselines configurations for the proxy, but the [proxy
 upstreams](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference)
 and [built-in proxy
 configuration](/consul/docs/connect/proxies/built-in) fields contain custom values:  
@ -253,13 +253,12 @@ configuration](/consul/docs/connect/proxies/built-in) fields contain custom valu
 The following fields are not supported in the `connect.sidecar_service` block:

 - `id` - Sidecar services get an ID assigned and it is an error to override
-  this. This ensures the agent can correctly deregister the sidecar service
+  this value. This ID is required to ensure that the agent can correctly deregister the sidecar service
  later when the parent service is removed.
- `kind` - Kind defaults to `connect-proxy` and there is currently no way to
-  unset this to make the registration be for a regular non-connect-proxy
-  service.
- `connect.sidecar_service` - Service definitions can't be nested recursively.
- `connect.native` - Currently the `kind` is fixed to `connect-proxy` and it's
+- `kind` - Kind defaults to `connect-proxy` and there is no way to
+  unset this behavior.
+- `connect.sidecar_service` - Service definitions cannot be nested recursively.
+- `connect.native` - The `kind` is fixed to `connect-proxy` and it is
  an error to register a `connect-proxy` that is also service mesh-native.

 ## Lifecycle
@ -270,17 +269,16 @@ have some specific behavior around their lifecycle that makes them easier to
 work with.

 The agent fixes the ID of the sidecar service to be based on the parent
-service's ID. This enables the following behavior.
+service's ID, which enables the following behavior.

- A service instance can _only ever have one_ sidecar service registered.
- When re-registering via API or reloading from configuration file:
-  - If something changes in the nested sidecar service definition, the change
-    will _update_ the current sidecar registration instead of creating a new
+- A service instance can only ever have one sidecar service registered.
+- When re-registering through the HTTP API or reloading from configuration file:
+  - If something changes in the nested sidecar service definition, the update is applied to the current sidecar registration instead of creating a new
    one.
  - If a service registration removes the nested `sidecar_service` then the
-    previously registered sidecar for that service will be deregistered
+    previously registered sidecar for that service is deregistered
    automatically.
 - When reloading the configuration files, if a service definition changes its
-  ID, then a new service instance _and_ a new sidecar instance will be
-  registered. The old ones will be removed since they are no longer found in
-  the config files.
+  ID, then a new service instance and a new sidecar instance are
+  registered. The old instance and proxy are removed because they are no longer found in
+  the configuration files.
--- a/website/content/docs/connect/proxies/envoy.mdx
+++ b/website/content/docs/connect/proxies/envoy.mdx
@ -24,7 +24,7 @@ Consul can configure Envoy sidecars to proxy traffic over the following protocol

 On Consul 1.5.0 and older, Envoy proxies can only proxy TCP traffic at L4.

-Some [L7 features](/consul/docs/connect/l7-traffic) can be configured using [configuration entries](/consul/docs/agent/config-entries). You can add [custom Envoy configurations](#advanced-configuration) to the [proxy service definition](/consul/docs/connect/registration/service-registration) to use Envoy features that are not currently exposed through configuration entries. Adding custom Envoy configurations to the service definition is an interim solution that enables you to use the more powerful features of Envoy.
+You can configure some [L7 features](/consul/docs/connect/l7-traffic) in [configuration entries](/consul/docs/agent/config-entries). You can add [custom Envoy configurations](#advanced-configuration) to the [proxy service definition](/consul/docs/connect/proxies/proxy-config-reference), which enables you to leverage Envoy features that are not exposed through configuration entries. You can also use the [Consul Envoy extensions](/consul/docs/connect/proxies/envoy-extensions) to implement Envoy features.

 ~> **Note:** When using Envoy with Consul and not using the [`consul connect envoy` command](/consul/commands/connect/envoy)
 Envoy must be run with the `--max-obj-name-len` option set to `256` or greater for Envoy versions prior to 1.11.0.
@ -77,7 +77,7 @@ The dynamic configuration Consul service mesh provides to each Envoy instance in
 - Service-discovery results for upstreams to enable each sidecar proxy to load-balance
  outgoing connections.
 - L7 configuration including timeouts and protocol-specific options.
- Configuration to [expose specific HTTP paths](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference).
+- Configuration to [expose specific HTTP paths](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference).

 For more information on the parts of the Envoy proxy runtime configuration
 that are currently controllable via Consul service mesh, refer to [Dynamic
@ -139,9 +139,9 @@ Consul service mesh can control some parts of the bootstrap configuration by spe

 Add the following configuration items to the [global `proxy-defaults` configuration
 entry](/consul/docs/connect/config-entries/proxy-defaults) or override them directly in the `proxy.config`
-field of a [proxy service definition](/consul/docs/connect/registration/service-registration). When
+field of a [proxy service definition](/consul/docs/proxies/proxy-config-reference). When
 connected to a Consul client agent, you can place the configuration in the `proxy.config` field of
-the [`sidecar_service`](/consul/docs/connect/registration/sidecar-service) block.
+the [`sidecar_service`](/consul/docs/connect/proxies/deploy-sidecar-services) block.

 - `envoy_statsd_url` - A URL in the form `udp://ip:port` identifying a UDP
  StatsD listener that Envoy should deliver metrics to. For example, this may be
@ -278,7 +278,7 @@ automatically configure its upstream listeners appropriately too as below.

 This automated discovery results in Consul auto-populating the `proxy.config`
 and `proxy.upstreams[*].config` fields of the [proxy service
-definition](/consul/docs/connect/registration/service-registration) that is
+definition](/consul/docs/connect/proxies/proxy-config-reference) that is
 actually registered.

 To learn about other options that can be configured centrally see the
@ -287,7 +287,7 @@ To learn about other options that can be configured centrally see the
 ### Proxy Config Options

 These fields may also be overridden explicitly in `proxy.config` of the [proxy service
-definition](/consul/docs/connect/registration/service-registration), or defined in
+definition](/consul/docs/connect/proxies/proxy-config-reference), or defined in
 the [global `proxy-defaults` configuration
 entry](/consul/docs/connect/config-entries/proxy-defaults) to act as
 defaults that are inherited by all services.
@ -359,8 +359,8 @@ defaults that are inherited by all services.

 The following configuration items may be overridden directly in the
 `proxy.upstreams[].config` field of a [proxy service
-definition](/consul/docs/connect/registration/service-registration) or
-[`sidecar_service`](/consul/docs/connect/registration/sidecar-service) block.
+definition](/consul/docs/connect/proxies/proxy-config-reference) or
+[`sidecar_service`](/consul/docs/connect/proxies/deploy-sidecar-services) block.

 - `protocol` - Same as above in main config but affects the listener setup for
  the upstream.
@ -436,7 +436,7 @@ definition](/consul/docs/connect/registration/service-registration) or
 ### Gateway Options

 These fields may also be overridden explicitly in the [proxy service
-definition](/consul/docs/connect/registration/service-registration), or defined in
+definition](/consul/docs/connect/proxies/proxy-config-reference), or defined in
 the [global `proxy-defaults` configuration
 entry](/consul/docs/connect/config-entries/proxy-defaults) to act as
 defaults that are inherited by all services.
@ -610,8 +610,8 @@ Users may add the following configuration items to the [global `proxy-defaults`
 configuration
 entry](/consul/docs/connect/config-entries/proxy-defaults) or
 override them directly in the `proxy.config` field of a [proxy service
-definition](/consul/docs/connect/registration/service-registration) or
-[`sidecar_service`](/consul/docs/connect/registration/sidecar-service) block.
+definition](/consul/docs/connect/proxies/proxy-config-reference) or
+[`sidecar_service`](/consul/docs/connect/proxies/deploy-sidecar-services) block.

 - `envoy_extra_static_clusters_json` - Specifies one or more [Envoy clusters](https://www.envoyproxy.io/docs/envoy/v1.17.2/api-v3/config/cluster/v3/cluster.proto)
  that will be appended to the array of [static
@ -791,8 +791,8 @@ Users may add the following configuration items to the [global `proxy-defaults`
 configuration
 entry](/consul/docs/connect/config-entries/proxy-defaults) or
 override them directly in the `proxy.config` field of a [proxy service
-definition](/consul/docs/connect/registration/service-registration) or
-[`sidecar_service`](/consul/docs/connect/registration/sidecar-service) block.
+definition](/consul/docs/connect/proxies/proxy-config-reference) or
+[`sidecar_service`](/consul/docs/connect/proxies/deploy-sidecar-services) block.

 - `envoy_bootstrap_json_tpl` - Specifies a template in Go template syntax that
  is used in place of [the default
@ -988,8 +988,8 @@ definition](/consul/docs/connect/registration/service-registration) or

 The following configuration items may be overridden directly in the
 `proxy.upstreams[].config` field of a [proxy service
-definition](/consul/docs/connect/registration/service-registration) or
-[`sidecar_service`](/consul/docs/connect/registration/sidecar-service) block.
+definition](/consul/docs/connect/proxies/proxy-config-reference) or
+[`sidecar_service`](/consul/docs/connect/deploy/deploy-sidecar-services) block.

 ~> **Note:** - When a
 [`service-router`](/consul/docs/connect/config-entries/service-router),
--- a/website/content/docs/connect/proxies/index.mdx
+++ b/website/content/docs/connect/proxies/index.mdx
@ -7,21 +7,25 @@ description: >-

 # Service mesh proxy overview

-This topic provides an overview of how Consul uses proxies in your service mesh. A proxy is a type of service that enables unmodified applications to connect to other services in the service mesh. Consul ships with a built-in L4 proxy and has first class support for Envoy. You can plug other proxies into your environment, as well, and apply configurations in Consul to define proxy behavior.
+This topic provides an overview of how Consul uses proxies in your service mesh. A proxy is a type of service that enables unmodified applications to connect to other services in the service mesh. Consul ships with a built-in L4 proxy and has first class support for Envoy. You can plug other proxies into your environment as well, and apply configurations in Consul to define proxy behavior.

 ## Proxy use cases

-_Proxies_ are services that you can configure to perform several different types of functions in Consul.
+You can configure proxies to perform several different types of functions in Consul.
+
+### Service mesh proxies
+
+A _service mesh proxy_ is any type of proxy service that you use for communication in a service mesh. Specialized proxy implementations, such as sidecar proxies and gateways, are subsets of service mesh proxies. Refer to [Deploy service mesh proxy services](/consul/docs/connect/proxies/deploy-service-mesh-proxies) for instructions on how to deploy a service mesh proxy.

 ### Sidecars

-You can configure proxies to operate as sidecar services transparently handles inbound and outbound service connections. Sidecars also automatically wrap and verify TLS connections. Each service in your mesh should have its own sidecar proxy.   
+Sidecar proxies are service mesh proxy implementations that transparently handles inbound and outbound service connections. Sidecars automatically wrap and verify TLS connections. In a non-containerized network, each service in your mesh should have its own sidecar proxy.   

 Refer to [Deploy sidecar services](/consul/docs/connect/proxies/deploy-sidecar-services) for additional information.

 ### Gateways

-You can configure proxies to operate as gateway services, which allow service-to-service traffic across different network areas, including peered clusters, WAN-federated datacenters, and nodes outside the mesh. Consul ships with several types of gateway capabilities, but gateways deliver the underlying functionality.
+You can configure service mesh proxies to operate as gateway services, which allow service-to-service traffic across different network areas, including peered clusters, WAN-federated datacenters, and nodes outside the mesh. Consul ships with several types of gateway capabilities, but gateways deliver the underlying functionality.

 Refer to [Gateways overview](/consul/docs/connect/gateways) for additional information.

@ -40,7 +44,7 @@ The following procedure describes how to implement proxies:

 1. **Configure global proxy settings**. You can configure global passthrough settings for all proxies deployed to your service mesh in the proxy defaults configuration entry. This step is not required, but it enables you to define common behaviors in a central configuration.
 1. **Deploy your service mesh proxy**. Configure proxy behavior in a service definition and register the proxy with Consul. 
-1. **Start the proxy service**. 
+1. **Start the proxy service**. Proxies appear in the list of services registered to Consul and must be started before they begin to route traffic in your service mesh.

 ### Dynamic upstreams require native integration

@ -48,7 +52,7 @@ Service mesh proxies do not support dynamic upstreams. If an application require

 ## Proxies in Kubernetes-orchestrated networks

-For Kubernetes-orchestrated environments, Consul deploys _dataplanes_ by default to manage proxies. Consul dataplanes are light-weight processes that leverage existing Kubernetes sidecar orchestration capabilities.  Refer to the [dataplanes documentation](/consul/docs/connect/dataplane) for additional information.
+For Kubernetes-orchestrated environments, Consul deploys _dataplanes_ by default to manage sidecar proxies. Consul dataplanes are light-weight processes that leverage existing Kubernetes sidecar orchestration capabilities.  Refer to the [dataplanes documentation](/consul/docs/connect/dataplane) for additional information.

 ## Guidance

@ -67,7 +71,7 @@ Refer to the following resources for help using service mesh proxies:

 ### Reference documentation

- [Proxy defaults configuration entry reference](/consul/docs/connect/config-entries/proxy-defaults) for additional information. 
+- [Proxy defaults configuration entry reference](/consul/docs/connect/config-entries/proxy-defaults)
 - [Envoy proxies reference](/consul/docs/connect/proxies/envoy)
 - [Service mesh proxy configuration reference](/consul/docs/connect/proxies/proxy-config-reference)
 - [`consul connect envoy` command](/consul/commands/connect/envoy)
--- a/website/content/docs/connect/proxies/proxy-config-reference.mdx
+++ b/website/content/docs/connect/proxies/proxy-config-reference.mdx
@ -89,7 +89,7 @@ Specify the following parameters in the `proxy` code block to configure a sideca
 * `local_service_port`: Integer value that specifies the port that the proxy should use to connect to the _local_ service instance. Refer to the [proxy parameters reference](#local-service-port) for details.
 * `local_service_address`: String value that specifies the IP address or hostname that the proxy should use to connect to the _local_ service. Refer to the [proxy parameters reference](#local-service-address) for details.

-See [Sidecar Service Registration](/consul/docs/connect/registration/sidecar-service) for additional information about configuring service mesh proxies as sidecars.
+Refer to [Deploy sidecar services](/consul/docs/connect/proxies/deploy-sidecar-services) for additional information about configuring service mesh proxies as sidecars.

 ### Complete configuration example

--- a/website/content/docs/k8s/connect/health.mdx
+++ b/website/content/docs/k8s/connect/health.mdx
@ -20,7 +20,7 @@ The Consul health check's state reflects the pod's readiness status.
 1. If the pod is using [transparent proxy mode](/consul/docs/connect/transparent-proxy),
 the mutating webhook redirects all `http` based startup, liveness, and readiness probes in the pod through the Envoy proxy.
 This webhook is defined in the
-[`ExposePaths` configuration](/consul/docs/connect/registration/service-registration#expose-paths-configuration-reference)
+[`ExposePaths` configuration](/consul/docs/connect/proxies/proxy-config-reference#expose-paths-configuration-reference)
 for each probe so that kubelet can access the endpoint through the Envoy proxy.

 The mutation behavior can be disabled, by setting either the `consul.hashicorp.com/transparent-proxy-overwrite-probes`
--- a/website/content/docs/services/configuration/services-configuration-reference.mdx
+++ b/website/content/docs/services/configuration/services-configuration-reference.mdx
@ -320,7 +320,7 @@ String value that identifies the service as a proxy and determines its role in t

 You can specify the following values:

- `connect-proxy`: Defines the configuration for a service mesh proxy. Refer to [Register a Service Mesh Proxy Outside of a Service Registration](/consul/docs/connect/registration/service-registration) for details about registering a service as a service mesh proxy.
+- `connect-proxy`: Defines the configuration for a service mesh proxy. Refer to [Deploy service mesh proxies](/consul/docs/connect/proxies/deploy-service-mesh-proxies) for details about registering a service as a service mesh proxy.
 - `ingress-gateway`: Defines the configuration for an [ingress gateway](/consul/docs/connect/config-entries/ingress-gateway)
 - `mesh-gateway`: Defines the configuration for a [mesh gateway](/consul/docs/connect/gateways/mesh-gateway)
 - `terminating-gateway`: Defines the configuration for a [terminating gateway](/consul/docs/connect/gateways/terminating-gateway)
@ -328,7 +328,7 @@ You can specify the following values:
 For non-service registration roles, the `kind` field has a different context when used to define configuration entries, such as `service-defaults`. Refer to the documentation for the configuration entry you want to implement for additional information. 

 ### proxy
-Object that specifies proxy configurations when the service is configured to operate as a proxy in a service mesh. Do not configure the `proxy` parameter for non-proxy service instances. Refer to [Register a Service Mesh Proxy Outside of a Service Registration](/consul/docs/connect/registration/service-registration) for details about registering your service as a service mesh proxy. Refer to [`kind`](#kind) for information about the types of proxies you can define. Services that you assign proxy roles to are registered as services in the catalog. 
+Object that specifies proxy configurations when the service is configured to operate as a proxy in a service mesh. Do not configure the `proxy` parameter for non-proxy service instances. Refer to [Service mesh proxies overview](/consul/docs/connect/proxies) for details about registering your service as a service mesh proxy. Refer to [`kind`](#kind) for information about the types of proxies you can define. Services that you assign proxy roles to are registered as services in the catalog. 

 ### connect
 Object that configures a Consul service mesh connection. You should only configure the `connect` block of parameters if you are using Consul service mesh. Refer to [Consul Service Mesh](/consul/docs/connect) for additional information. 
@ -338,7 +338,7 @@ The following table describes the parameters that you can place in the `connect`
 | Parameter | Description | Default |
 | ---       | ---         | ---     |
 | `native` | Boolean value that advertises the service as a native service mesh proxy. Use this parameter to integrate your application with the `connect` API. Refer to [Service Mesh Native App Integration Overview](/consul/docs/connect/native) for additional information. If set to `true`, do not configure a `sidecar_service`. | `false` |
-| `sidecar_service` | Object that defines a sidecar proxy for the service. Do not configure if `native` is set to `true`. Refer to [Register a Service Mesh Proxy in a Service Registration](/consul/docs/connect/registration/sidecar-service) for usage and configuration details. | Refer to [Register a Service Mesh Proxy in a Service Registration](/consul/docs/connect/registration/sidecar-service) for default configurations. |
+| `sidecar_service` | Object that defines a sidecar proxy for the service. Do not configure if `native` is set to `true`. Refer to [Deploy sidecar services](/consul/docs/connect/proxies/deploy-sidecar-services) for usage and configuration details. | Refer to [Sidecar service defaults](/consul/docs/connect/proxies/deploy-sidecar-services#sidecar-service-defaults). |

 ### weights
 Object that configures how the service responds to DNS SRV requests based on the service's health status. Configuring allows service instances with more capacity to respond to DNS SRV requests. It also reduces the load on services with checks in `warning` status by giving passing instances a higher weight.
--- a/website/content/docs/services/discovery/dns-overview.mdx
+++ b/website/content/docs/services/discovery/dns-overview.mdx
@ -26,7 +26,7 @@ Refer to [ Native App Integration](/consul/docs/connect/native) and its [Go pack
 ### DNS versus upstreams
 If you are using Consul for service discovery and have not enabled service mesh features, then use the DNS to discover services and nodes in the Consul catalog.

-If you are using Consul for service mesh on VMs, you can use upstreams or DNS. We recommend using upstreams because you can query services and nodes without modifying the application code or environment variables. Refer to [Upstream Configuration Reference](/consul/docs/connect/registration/service-registration#upstream-configuration-reference) for additional information.
+If you are using Consul for service mesh on VMs, you can use upstreams or DNS. We recommend using upstreams because you can query services and nodes without modifying the application code or environment variables. Refer to [Upstream Configuration Reference](/consul/docs/connect/proxies/proxy-config-reference#upstream-configuration-reference) for additional information.

 If you are using Consul on Kubernetes, refer to [the upstreams annotation documentation](/consul/docs/k8s/annotations-and-labels#consul-hashicorp-com-connect-service-upstreams) for additional information.

--- a/website/content/docs/services/services.mdx
+++ b/website/content/docs/services/services.mdx
@ -35,7 +35,7 @@ Consul redirects service traffic through sidecar proxies if you use Consul servi

 ### Virtual machines

-You must define upstream services in the service definition. Consul uses the upstream configuration to bind the service with its upstreams. After registering the service, you must start a sidecar proxy on the VM to enable mesh connectivity. Refer to [Register a Service Mesh Proxy in a Service Registration](/consul/docs/connect/registration/sidecar-service) for details.
+You must define upstream services in the service definition. Consul uses the upstream configuration to bind the service with its upstreams. After registering the service, you must start a sidecar proxy on the VM to enable mesh connectivity. Refer to [Deploy sidecar services](/consul/docs/connect/proxies/deploy-sidecar-services) for additional information.

 ### Kubernetes

--- a/website/content/docs/upgrading/upgrade-specific.mdx
+++ b/website/content/docs/upgrading/upgrade-specific.mdx
@ -786,7 +786,7 @@ Starting with Consul 1.7.1 this is the new default.
 Managed proxies, which are deprecated since Consul v1.3.0, have now been 
 [removed](/consul/docs/connect/proxies). Before upgrading, you must
 migrate any managed proxy usage to [sidecar service
-registrations](/consul/docs/connect/registration/sidecar-service).
+registrations](/consul/docs/connect/proxies/deploy-sidecar-services).

 ## Consul 1.4.0