open-consul/agent/consul/client.go

430 lines
12 KiB
Go
Raw Normal View History

2013-12-19 22:48:14 +00:00
package consul
import (
"fmt"
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
"io"
2013-12-19 22:48:14 +00:00
"log"
"os"
"strconv"
2013-12-19 22:48:14 +00:00
"sync"
"sync/atomic"
2013-12-19 23:42:17 +00:00
"time"
"github.com/armon/go-metrics"
"github.com/hashicorp/consul/agent/pool"
"github.com/hashicorp/consul/agent/router"
"github.com/hashicorp/consul/agent/structs"
2017-01-18 06:20:11 +00:00
"github.com/hashicorp/consul/lib"
"github.com/hashicorp/consul/tlsutil"
"github.com/hashicorp/serf/serf"
"golang.org/x/time/rate"
2013-12-19 22:48:14 +00:00
)
const (
// clientRPCConnMaxIdle controls how long we keep an idle connection
// open to a server. 127s was chosen as the first prime above 120s
// (arbitrarily chose to use a prime) with the intent of reusing
// connections who are used by once-a-minute cron(8) jobs *and* who
// use a 60s jitter window (e.g. in vixie cron job execution can
// drift by up to 59s per job, or 119s for a once-a-minute cron job).
clientRPCConnMaxIdle = 127 * time.Second
2015-09-15 12:22:08 +00:00
// clientMaxStreams controls how many idle streams we keep
// open to a server
clientMaxStreams = 32
// serfEventBacklog is the maximum number of unprocessed Serf Events
// that will be held in queue before new serf events block. A
// blocking serf event queue is a bad thing.
serfEventBacklog = 256
// serfEventBacklogWarning is the threshold at which point log
// warnings will be emitted indicating a problem when processing serf
// events.
serfEventBacklogWarning = 200
)
2013-12-19 22:48:14 +00:00
// Client is Consul client which uses RPC to communicate with the
// services for service discovery, health checking, and DC forwarding.
type Client struct {
config *Config
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
// acls is used to resolve tokens to effective policies
acls *ACLResolver
// DEPRECATED (ACL-Legacy-Compat) - Only needed while we support both
// useNewACLs is a flag to indicate whether we are using the new ACL system
useNewACLs int32
2013-12-19 22:48:14 +00:00
// Connection pool to consul servers
connPool *pool.ConnPool
2013-12-19 22:48:14 +00:00
// routers is responsible for the selection and maintenance of
2016-03-25 18:57:54 +00:00
// Consul servers this agent uses for RPC requests
routers *router.Manager
2013-12-19 22:48:14 +00:00
// rpcLimiter is used to rate limit the total number of RPCs initiated
// from an agent.
rpcLimiter atomic.Value
2013-12-19 22:48:14 +00:00
// eventCh is used to receive events from the
// serf cluster in the datacenter
eventCh chan serf.Event
// Logger uses the provided LogOutput
logger *log.Logger
// serf is the Serf cluster maintained inside the DC
// which contains all the DC nodes
serf *serf.Serf
shutdown bool
shutdownCh chan struct{}
shutdownLock sync.Mutex
// embedded struct to hold all the enterprise specific data
EnterpriseClient
2013-12-19 22:48:14 +00:00
}
// NewClient is used to construct a new Consul client from the configuration,
// potentially returning an error.
// NewClient only used to help setting up a client for testing. Normal code
// exercises NewClientLogger.
2013-12-19 22:48:14 +00:00
func NewClient(config *Config) (*Client, error) {
c, err := tlsutil.NewConfigurator(config.ToTLSUtilConfig(), nil)
if err != nil {
return nil, err
}
return NewClientLogger(config, nil, c)
}
func NewClientLogger(config *Config, logger *log.Logger, tlsConfigurator *tlsutil.Configurator) (*Client, error) {
// Check the protocol version
2017-05-03 19:02:01 +00:00
if err := config.CheckProtocolVersion(); err != nil {
return nil, err
}
2013-12-19 22:48:14 +00:00
// Check for a data directory!
if config.DataDir == "" {
return nil, fmt.Errorf("Config must provide a DataDir")
}
2014-08-05 22:20:35 +00:00
// Sanity check the ACLs
if err := config.CheckACL(); err != nil {
return nil, err
}
2013-12-19 22:48:14 +00:00
// Ensure we have a log output
if config.LogOutput == nil {
config.LogOutput = os.Stderr
}
// Create a logger
if logger == nil {
logger = log.New(config.LogOutput, "", log.LstdFlags)
}
2013-12-19 22:48:14 +00:00
connPool := &pool.ConnPool{
SrcAddr: config.RPCSrcAddr,
LogOutput: config.LogOutput,
MaxTime: clientRPCConnMaxIdle,
MaxStreams: clientMaxStreams,
TLSWrapper: tlsConfigurator.OutgoingRPCWrapper(),
ForceTLS: config.VerifyOutgoing,
}
// Create client
2013-12-19 22:48:14 +00:00
c := &Client{
config: config,
connPool: connPool,
eventCh: make(chan serf.Event, serfEventBacklog),
2013-12-19 22:48:14 +00:00
logger: logger,
shutdownCh: make(chan struct{}),
}
2018-06-27 13:07:22 +00:00
c.rpcLimiter.Store(rate.NewLimiter(config.RPCRate, config.RPCMaxBurst))
if err := c.initEnterprise(); err != nil {
c.Shutdown()
return nil, err
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
c.useNewACLs = 0
aclConfig := ACLResolverConfig{
Config: config,
Delegate: c,
Logger: logger,
AutoDisable: true,
CacheConfig: clientACLCacheConfig,
Sentinel: nil,
}
var err error
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
if c.acls, err = NewACLResolver(&aclConfig); err != nil {
c.Shutdown()
return nil, fmt.Errorf("Failed to create ACL resolver: %v", err)
}
// Initialize the LAN Serf
2013-12-19 22:48:14 +00:00
c.serf, err = c.setupSerf(config.SerfLANConfig,
c.eventCh, serfLANSnapshot)
if err != nil {
c.Shutdown()
return nil, fmt.Errorf("Failed to start lan serf: %v", err)
}
New ACLs (#4791) This PR is almost a complete rewrite of the ACL system within Consul. It brings the features more in line with other HashiCorp products. Obviously there is quite a bit left to do here but most of it is related docs, testing and finishing the last few commands in the CLI. I will update the PR description and check off the todos as I finish them over the next few days/week. Description At a high level this PR is mainly to split ACL tokens from Policies and to split the concepts of Authorization from Identities. A lot of this PR is mostly just to support CRUD operations on ACLTokens and ACLPolicies. These in and of themselves are not particularly interesting. The bigger conceptual changes are in how tokens get resolved, how backwards compatibility is handled and the separation of policy from identity which could lead the way to allowing for alternative identity providers. On the surface and with a new cluster the ACL system will look very similar to that of Nomads. Both have tokens and policies. Both have local tokens. The ACL management APIs for both are very similar. I even ripped off Nomad's ACL bootstrap resetting procedure. There are a few key differences though. Nomad requires token and policy replication where Consul only requires policy replication with token replication being opt-in. In Consul local tokens only work with token replication being enabled though. All policies in Nomad are globally applicable. In Consul all policies are stored and replicated globally but can be scoped to a subset of the datacenters. This allows for more granular access management. Unlike Nomad, Consul has legacy baggage in the form of the original ACL system. The ramifications of this are: A server running the new system must still support other clients using the legacy system. A client running the new system must be able to use the legacy RPCs when the servers in its datacenter are running the legacy system. The primary ACL DC's servers running in legacy mode needs to be a gate that keeps everything else in the entire multi-DC cluster running in legacy mode. So not only does this PR implement the new ACL system but has a legacy mode built in for when the cluster isn't ready for new ACLs. Also detecting that new ACLs can be used is automatic and requires no configuration on the part of administrators. This process is detailed more in the "Transitioning from Legacy to New ACL Mode" section below.
2018-10-19 16:04:07 +00:00
if c.acls.ACLsEnabled() {
go c.monitorACLMode()
}
// Start maintenance task for servers
c.routers = router.New(c.logger, c.shutdownCh, c.serf, c.connPool)
go c.routers.Start()
// Start LAN event handlers after the router is complete since the event
// handlers depend on the router and the router depends on Serf.
go c.lanEventHandler()
if err := c.startEnterprise(); err != nil {
c.Shutdown()
return nil, err
}
2013-12-19 22:48:14 +00:00
return c, nil
}
// Shutdown is used to shutdown the client
func (c *Client) Shutdown() error {
2014-01-10 19:06:11 +00:00
c.logger.Printf("[INFO] consul: shutting down client")
2013-12-19 22:48:14 +00:00
c.shutdownLock.Lock()
defer c.shutdownLock.Unlock()
if c.shutdown {
return nil
}
c.shutdown = true
close(c.shutdownCh)
if c.serf != nil {
c.serf.Shutdown()
}
// Close the connection pool
c.connPool.Shutdown()
return nil
}
// Leave is used to prepare for a graceful shutdown
func (c *Client) Leave() error {
2014-01-10 19:06:11 +00:00
c.logger.Printf("[INFO] consul: client starting leave")
2013-12-19 22:48:14 +00:00
// Leave the LAN pool
if c.serf != nil {
if err := c.serf.Leave(); err != nil {
2014-01-10 19:06:11 +00:00
c.logger.Printf("[ERR] consul: Failed to leave LAN Serf cluster: %v", err)
2013-12-19 22:48:14 +00:00
}
}
return nil
}
// JoinLAN is used to have Consul client join the inner-DC pool
// The target address should be another node inside the DC
// listening on the Serf LAN address
func (c *Client) JoinLAN(addrs []string) (int, error) {
return c.serf.Join(addrs, true)
2013-12-19 22:48:14 +00:00
}
// LocalMember is used to return the local node
func (c *Client) LocalMember() serf.Member {
return c.serf.LocalMember()
}
2013-12-19 22:48:14 +00:00
// LANMembers is used to return the members of the LAN cluster
func (c *Client) LANMembers() []serf.Member {
return c.serf.Members()
}
// LANMembersAllSegments returns members from all segments.
func (c *Client) LANMembersAllSegments() ([]serf.Member, error) {
return c.serf.Members(), nil
}
// LANSegmentMembers only returns our own segment's members, because clients
// can't be in multiple segments.
func (c *Client) LANSegmentMembers(segment string) ([]serf.Member, error) {
if segment == c.config.Segment {
return c.LANMembers(), nil
}
return nil, fmt.Errorf("segment %q not found", segment)
}
// RemoveFailedNode is used to remove a failed node from the cluster
func (c *Client) RemoveFailedNode(node string) error {
return c.serf.RemoveFailedNode(node)
}
2014-11-20 00:45:49 +00:00
// KeyManagerLAN returns the LAN Serf keyring manager
func (c *Client) KeyManagerLAN() *serf.KeyManager {
return c.serf.KeyManager()
}
// Encrypted determines if gossip is encrypted
func (c *Client) Encrypted() bool {
return c.serf.EncryptionEnabled()
}
2013-12-19 23:08:55 +00:00
// RPC is used to forward an RPC call to a consul server, or fail if no servers
func (c *Client) RPC(method string, args interface{}, reply interface{}) error {
// This is subtle but we start measuring the time on the client side
// right at the time of the first request, vs. on the first retry as
// is done on the server side inside forward(). This is because the
// servers may already be applying the RPCHoldTimeout up there, so by
// starting the timer here we won't potentially double up the delay.
// TODO (slackpad) Plumb a deadline here with a context.
firstCheck := time.Now()
TRY:
server := c.routers.FindServer()
if server == nil {
return structs.ErrNoServers
}
// Enforce the RPC limit.
metrics.IncrCounter([]string{"client", "rpc"}, 1)
if !c.rpcLimiter.Load().(*rate.Limiter).Allow() {
metrics.IncrCounter([]string{"client", "rpc", "exceeded"}, 1)
return structs.ErrRPCRateExceeded
}
// Make the request.
rpcErr := c.connPool.RPC(c.config.Datacenter, server.Addr, server.Version, method, server.UseTLS, args, reply)
if rpcErr == nil {
return nil
}
// Move off to another server, and see if we can retry.
c.logger.Printf("[ERR] consul: %q RPC failed to server %s: %v", method, server.Addr, rpcErr)
metrics.IncrCounterWithLabels([]string{"client", "rpc", "failed"}, 1, []metrics.Label{{Name: "server", Value: server.Name}})
c.routers.NotifyFailedServer(server)
if retry := canRetry(args, rpcErr); !retry {
return rpcErr
}
// We can wait a bit and retry!
if time.Since(firstCheck) < c.config.RPCHoldTimeout {
jitter := lib.RandomStagger(c.config.RPCHoldTimeout / jitterFraction)
select {
case <-time.After(jitter):
goto TRY
case <-c.shutdownCh:
}
}
return rpcErr
2013-12-19 23:08:55 +00:00
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// SnapshotRPC sends the snapshot request to one of the servers, reading from
// the streaming input and writing to the streaming output depending on the
// operation.
func (c *Client) SnapshotRPC(args *structs.SnapshotRequest, in io.Reader, out io.Writer,
replyFn structs.SnapshotReplyFn) error {
server := c.routers.FindServer()
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
if server == nil {
return structs.ErrNoServers
}
// Enforce the RPC limit.
metrics.IncrCounter([]string{"client", "rpc"}, 1)
if !c.rpcLimiter.Load().(*rate.Limiter).Allow() {
metrics.IncrCounter([]string{"client", "rpc", "exceeded"}, 1)
return structs.ErrRPCRateExceeded
}
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
// Request the operation.
var reply structs.SnapshotResponse
snap, err := SnapshotRPC(c.connPool, c.config.Datacenter, server.Addr, server.UseTLS, args, in, &reply)
Adds support for snapshots and restores. (#2396) * Updates Raft library to get new snapshot/restore API. * Basic backup and restore working, but need some cleanup. * Breaks out a snapshot module and adds a SHA256 integrity check. * Adds snapshot ACL and fills in some missing comments. * Require a consistent read for snapshots. * Make sure snapshot works if ACLs aren't enabled. * Adds a bit of package documentation. * Returns an empty response from restore to avoid EOF errors. * Adds API client support for snapshots. * Makes internal file names match on-disk file snapshots. * Adds DC and token coverage for snapshot API test. * Adds missing documentation. * Adds a unit test for the snapshot client endpoint. * Moves the connection pool out of the client for easier testing. * Fixes an incidental issue in the prepared query unit test. I realized I had two servers in bootstrap mode so this wasn't a good setup. * Adds a half close to the TCP stream and fixes panic on error. * Adds client and endpoint tests for snapshots. * Moves the pool back into the snapshot RPC client. * Adds a TLS test and fixes half-closes for TLS connections. * Tweaks some comments. * Adds a low-level snapshot test. This is independent of Consul so we can pull this out into a library later if we want to. * Cleans up snapshot and archive and completes archive tests. * Sends a clear error for snapshot operations in dev mode. Snapshots require the Raft snapshots to be readable, which isn't supported in dev mode. Send a clear error instead of a deep-down Raft one. * Adds docs for the snapshot endpoint. * Adds a stale mode and index feedback for snapshot saves. This gives folks a way to extract data even if the cluster has no leader. * Changes the internal format of a snapshot from zip to tgz. * Pulls in Raft fix to cancel inflight before a restore. * Pulls in new Raft restore interface. * Adds metadata to snapshot saves and a verify function. * Adds basic save and restore snapshot CLI commands. * Gets rid of tarball extensions and adds restore message. * Fixes an incidental bad link in the KV docs. * Adds documentation for the snapshot CLI commands. * Scuttle any request body when a snapshot is saved. * Fixes archive unit test error message check. * Allows for nil output writers in snapshot RPC handlers. * Renames hash list Decode to DecodeAndVerify. * Closes the client connection for snapshot ops. * Lowers timeout for restore ops. * Updates Raft vendor to get new Restore signature and integrates with Consul. * Bounces the leader's internal state when we do a restore.
2016-10-26 02:20:24 +00:00
if err != nil {
return err
}
defer func() {
if err := snap.Close(); err != nil {
c.logger.Printf("[WARN] consul: Failed closing snapshot stream: %v", err)
}
}()
// Let the caller peek at the reply.
if replyFn != nil {
if err := replyFn(&reply); err != nil {
return nil
}
}
// Stream the snapshot.
if out != nil {
if _, err := io.Copy(out, snap); err != nil {
return fmt.Errorf("failed to stream snapshot: %v", err)
}
}
return nil
}
// Stats is used to return statistics for debugging and insight
// for various sub-systems
func (c *Client) Stats() map[string]map[string]string {
numServers := c.routers.NumServers()
toString := func(v uint64) string {
return strconv.FormatUint(v, 10)
}
stats := map[string]map[string]string{
"consul": map[string]string{
2014-02-24 02:08:58 +00:00
"server": "false",
"known_servers": toString(uint64(numServers)),
},
"serf_lan": c.serf.Stats(),
"runtime": runtimeStats(),
}
if c.ACLsEnabled() {
if c.UseLegacyACLs() {
stats["consul"]["acl"] = "legacy"
} else {
stats["consul"]["acl"] = "enabled"
}
} else {
stats["consul"]["acl"] = "disabled"
}
for outerKey, outerValue := range c.enterpriseStats() {
if _, ok := stats[outerKey]; ok {
for innerKey, innerValue := range outerValue {
stats[outerKey][innerKey] = innerValue
}
} else {
stats[outerKey] = outerValue
}
}
return stats
}
2015-04-15 23:12:45 +00:00
// GetLANCoordinate returns the network coordinate of the current node, as
// maintained by Serf.
func (c *Client) GetLANCoordinate() (lib.CoordinateSet, error) {
lan, err := c.serf.GetCoordinate()
if err != nil {
return nil, err
}
cs := lib.CoordinateSet{c.config.Segment: lan}
return cs, nil
2015-04-15 23:12:45 +00:00
}
// ReloadConfig is used to have the Client do an online reload of
// relevant configuration information
func (c *Client) ReloadConfig(config *Config) error {
c.rpcLimiter.Store(rate.NewLimiter(config.RPCRate, config.RPCMaxBurst))
return nil
}