open-consul/ui/packages/consul-ui/app/locations/fsm-with-optional.js

374 lines
11 KiB
JavaScript
Raw Normal View History

/**
* Copyright (c) HashiCorp, Inc.
* SPDX-License-Identifier: MPL-2.0
*/
import { env } from 'consul-ui/env';
const OPTIONAL = {};
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
if (env('CONSUL_PARTITIONS_ENABLED')) {
OPTIONAL.partition = /^_([a-zA-Z0-9]([a-zA-Z0-9-]{0,62}[a-zA-Z0-9])?)$/;
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
}
if (env('CONSUL_NSPACES_ENABLED')) {
OPTIONAL.nspace = /^~([a-zA-Z0-9]([a-zA-Z0-9-]{0,62}[a-zA-Z0-9])?)$/;
}
ui: feature-flagged peering mvp (#13425) * add peers route * add peers to nav * use regular app ui patterns peers template * use empty state in peers UI * mock `v1/peerings` request * implement custom adapter/serializer for `peers`-model * index request for peerings on peers route * update peers list to show as proper list * Use tailwind for easier styling * Unique ids in peerings response mock-api * Add styling peerings list * Allow creating empty tooltip To make it easier to iterate over a set of items where some items should not display a tooltip and others should. * Add tooltip Peerings:Badge * Add undefined peering state badge * Remove imported/exported services count peering This won't be included in the initial version of the API response * Implement Peerings::Search * Make it possible to filter peerings by name * Install ember-keyboard For idiomatic handling of key-presses. * Clear peering search input when pressing `Escape` * use peers.index instead of peers for peerings listing * Allow to include peered services in services-query * update services mock to add peerName * add Consul::Peer component To surface peering information on a resource * add PeerName as attribute to service model * surface peering information in service list * Add tooltip to Consul::Peer * Make services searchable by peer-name * Allow passing optional query-params to href-to * Add peer query-param to dc.services.show * Pass peer as query-param services listing * support option peer route-param * set peer-name undefined in services serializer when empty * update peer route-param when navigating to peered service * request sercice with peer-name if need be * make sure to reset peer route-param when leaving service.show * componentize services.peer-info * surface peer info services.show * make sure to reset peer route-param in main nav * fix services breadcrumb services.intentions we need to reset peer route-param here to not break the app * surface peer when querying for it on service api call * query for peer info service-instance api calls * surface peer info service-instance.show * Camelize peer attributes to match rest of app * Refactor peers.index to reflect camelized attributes for peer * Remove unused query-params services.show * make logo href reset peer route-param * Cleanup optional peer param query service-instance * Use replace decorator instead of serializer for empty peerName * make sure to only send peer info when correct qp is passed * Always send qp for querying peers services request * rename with-imports to with-peers * Use css for peer-icon * Refactor bucket-list component to surface peer-info * Remove Consul::Peer component This info is now displayed via the bucket-list component * Fix bucket-list component to surface service again * Update bucket-list docs to reflect peer-info addition * Remove tailwind related styles * Remove consul-tailwind package We won't be using tailwind for now * Fix typo badge scss * Add with-import handling mock-api nodes * Add peerName to node attributes * include peers when querying nodes * reflect api updates node list mock * Create consul::node::peer-info component * Surface peer-info in nodes list * Mock peer response for node request * Make it possible to add peer-name to node request * Update peer route-param when linking to node * Reset peers route-param when leaving nodes.show We need to reset the route-param to not introduce a bug - otherwise subsequent node show request would request with the old peer query-param * Add sourcePeer intentions api mock * add SourcePeer attr to intentions model * Surface peering info on intentions list * Request peered intentions differently intentions.edit * Handle peer info in intentions/exact mock * Surface peering info intention view * Add randomized peer data topology mock * Surface peer info topology view * fix service/peer-info styling We aren't using tailwind anymore - we need to create a custom scss file * Update peerings api mocks * Update peerings::badge with updated styling * cleanup intentions/exact mock * Create watcher component to declaratively register polling * Poll peers in background when on peers route * use existing colors for peering-badge * Add test for requesting service with `with-peers`-query * add imported/exported count to peers model * update mock-api to surface exported/imported count on peers * Show exported/imported peers count on peers list * Use translations for service import/export UI peers * Make sure to ask for nodes with peers * Add match-url step for easier url testing of service urls * Add test for peer-name on peered services * Add test for service navigation peered service * Implement feature-flag handling * Enable peering feature in test and development * Redirect peers to services.index when feature-flag is disabled * Only query for peers when feature is enabled * Only show peers in nav when feature is enabled * Componentize peering service count detail * Handle non-state Peerings::Badge * Use Peerings::ServiceCount in peerings list * Only send peer query for peered service-instances. * Add step to visit url directly * add test for accessing peered service directly * Remove unused service import peers.index * Only query for peer when peer provided node-adapter * fix tests
2022-06-23 13:16:26 +00:00
OPTIONAL.peer = /^:([a-zA-Z0-9]([a-zA-Z0-9-]{0,62}[a-zA-Z0-9])?)$/;
const trailingSlashRe = /\/$/;
// see below re: ember double slashes
// const moreThan1SlashRe = /\/{2,}/g;
ui: chore - upgrade ember and friends (#14518) * v3.20.2...v3.24.0 * Fix handle undefined outlet in route component * Don't use template helper for optional modal.open Using the optional-helper here will trigger a computation in the same runloop error. This is because we are setting the `modal`-property when the `<Ref>` component gets rendered which will update the `this.modal`-property which will then recompute the `optional`-helper leading to this error. Instead we will create an action that will call the `open`-method on the modal when it is defined. This gets rid of the double computation error as we will not access the modal property twice in the same runloop when `modal` is getting set. * Fix - fn needs to be passed function tab-nav We create functions in the component file instead so that fn-helper stops complaining about the need to pass a function. * Update ember-exam to 6.1 version "Makes it compatible" with ember-qunit v5 * scheduleOnce setMaxHeight paged-collection We need to schedule to get around double-computation error. * Fix - model.data is removed from ember-data This has been private API all along - we need to work around the removal. Reference: https://github.com/emberjs/data/pull/7338/files#diff-9a8746fc5c86fd57e6122f00fef3155f76f0f3003a24b53fb7c4621d95dcd9bfL1310 * Fix `propContains` instead of `deepEqual` policy Recent model.data works differently than iterating attributes. We use `propContains` instead of `deepEqual`. We are only interested in the properties we assert against and match the previous behavior with this change. * Fix `propContains` instead of `deepEqual` token * Better handling single-records repo test-helper `model.data` has been removed we need to handle proxies and model instances differently. * Fix remaining repository tests with propContains We don't want to match entire objects - we don't care about properties we haven't defined in the assertion. * Don't use template helper for optional modal.open Using a template helper will give us a recomputation error - we work around it by creating an explicit action on the component instead. * Await `I $verb the $pageObject object` step * Fix no more customization ember-can No need to customize, the helper handles destruction fine on its own. * Fix - don't pass `optional` functions to fn We will declare the functions on the component instead. This gives us the same behavior but no error from `fn`, which expects a function to be passed. * Fix - handle `undefined` state on validate modifier StateChart can yield out an undefined `state` we need to handle that in the validate modifier * Fix linting errors tests directory * Warn / turn off new ember linting issues We will tackle them one by one and don't want to autofix issues that could be dangerous to auto-fix. * Auto-fix linting issues * More linting configuration * Fix remaining linting issues * Fix linting issues new files after rebase * ui: Remove ember-cli-uglify config now we are using terser (#14574) Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
2022-09-15 08:43:17 +00:00
const _uuid = function () {
return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, (c) => {
const r = (Math.random() * 16) | 0;
return (c === 'x' ? r : (r & 3) | 8).toString(16);
});
};
// let popstateFired = false;
/**
* Register a callback to be invoked whenever the browser history changes,
* including using forward and back buttons.
*/
ui: chore - upgrade ember and friends (#14518) * v3.20.2...v3.24.0 * Fix handle undefined outlet in route component * Don't use template helper for optional modal.open Using the optional-helper here will trigger a computation in the same runloop error. This is because we are setting the `modal`-property when the `<Ref>` component gets rendered which will update the `this.modal`-property which will then recompute the `optional`-helper leading to this error. Instead we will create an action that will call the `open`-method on the modal when it is defined. This gets rid of the double computation error as we will not access the modal property twice in the same runloop when `modal` is getting set. * Fix - fn needs to be passed function tab-nav We create functions in the component file instead so that fn-helper stops complaining about the need to pass a function. * Update ember-exam to 6.1 version "Makes it compatible" with ember-qunit v5 * scheduleOnce setMaxHeight paged-collection We need to schedule to get around double-computation error. * Fix - model.data is removed from ember-data This has been private API all along - we need to work around the removal. Reference: https://github.com/emberjs/data/pull/7338/files#diff-9a8746fc5c86fd57e6122f00fef3155f76f0f3003a24b53fb7c4621d95dcd9bfL1310 * Fix `propContains` instead of `deepEqual` policy Recent model.data works differently than iterating attributes. We use `propContains` instead of `deepEqual`. We are only interested in the properties we assert against and match the previous behavior with this change. * Fix `propContains` instead of `deepEqual` token * Better handling single-records repo test-helper `model.data` has been removed we need to handle proxies and model instances differently. * Fix remaining repository tests with propContains We don't want to match entire objects - we don't care about properties we haven't defined in the assertion. * Don't use template helper for optional modal.open Using a template helper will give us a recomputation error - we work around it by creating an explicit action on the component instead. * Await `I $verb the $pageObject object` step * Fix no more customization ember-can No need to customize, the helper handles destruction fine on its own. * Fix - don't pass `optional` functions to fn We will declare the functions on the component instead. This gives us the same behavior but no error from `fn`, which expects a function to be passed. * Fix - handle `undefined` state on validate modifier StateChart can yield out an undefined `state` we need to handle that in the validate modifier * Fix linting errors tests directory * Warn / turn off new ember linting issues We will tackle them one by one and don't want to autofix issues that could be dangerous to auto-fix. * Auto-fix linting issues * More linting configuration * Fix remaining linting issues * Fix linting issues new files after rebase * ui: Remove ember-cli-uglify config now we are using terser (#14574) Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
2022-09-15 08:43:17 +00:00
const route = function (e) {
const path = e.state.path;
const url = this.getURLForTransition(path);
// Ignore initial page load popstate event in Chrome
// if (!popstateFired) {
// popstateFired = true;
// if (url === this._previousURL) {
// return;
// }
// }
if (url === this._previousURL) {
if (path === this._previousPath) {
return;
}
this._previousPath = e.state.path;
// async
this.container.lookup('route:application').refresh();
}
if (typeof this.callback === 'function') {
// TODO: Can we use `settled` or similar to make this `route` method async?
// not async
this.callback(url);
}
// used for webkit workaround
this._previousURL = url;
this._previousPath = e.state.path;
};
export default class FSMWithOptionalLocation {
// extend FSMLocation
implementation = 'fsm-with-optional';
baseURL = '';
/**
* Set from router:main._setupLocation (-internals/routing/lib/system/router)
* Will be pre-pended to path upon state change
*/
rootURL = '/';
/**
* Path is the 'application path' i.e. the path/URL with no root/base URLs
* but potentially with optional parameters (these are remove when getURL is called)
*/
path = '/';
/**
* Sneaky undocumented property used in ember's main router used to skip any
* setup of location from the main router. We currently don't need this but
* document it here incase we ever do.
*/
cancelRouterSetup = false;
/**
* Used to store our 'optional' segments should we have any
*/
optional = {};
static create() {
return new this(...arguments);
}
constructor(owner, doc, env) {
this.container = Object.entries(owner)[0][1];
// add the route/state change handler
this.route = route.bind(this);
this.doc = typeof doc === 'undefined' ? this.container.lookup('service:-document') : doc;
this.env = typeof env === 'undefined' ? this.container.lookup('service:env') : env;
const base = this.doc.querySelector('base[href]');
if (base !== null) {
this.baseURL = base.getAttribute('href');
}
}
/**
* @internal
* Called from router:main._setupLocation (-internals/routing/lib/system/router)
* Used to set state on first call to setURL
*/
initState() {
this.location = this.location || this.doc.defaultView.location;
this.machine = this.machine || this.doc.defaultView.history;
this.doc.defaultView.addEventListener('popstate', this.route);
const state = this.machine.state;
const url = this.getURL();
const href = this.formatURL(url);
if (state && state.path === href) {
// preserve existing state
// used for webkit workaround, since there will be no initial popstate event
this._previousPath = href;
this._previousURL = url;
} else {
this.dispatch('replace', href);
}
}
getURLFrom(url) {
// remove trailing slashes if they exist
url = url || this.location.pathname;
this.rootURL = this.rootURL.replace(trailingSlashRe, '');
this.baseURL = this.baseURL.replace(trailingSlashRe, '');
// remove baseURL and rootURL from start of path
return url
.replace(new RegExp(`^${this.baseURL}(?=/|$)`), '')
.replace(new RegExp(`^${this.rootURL}(?=/|$)`), '');
// ember default locations remove double slashes here e.g. '//'
// .replace(moreThan1SlashRe, '/'); // remove extra slashes
}
getURLForTransition(url) {
this.optional = {};
url = this.getURLFrom(url)
.split('/')
.filter((item, i) => {
if (i < 3) {
let found = false;
Object.entries(OPTIONAL).reduce((prev, [key, re]) => {
const res = re.exec(item);
if (res !== null) {
prev[key] = {
value: item,
match: res[1],
};
found = true;
}
return prev;
}, this.optional);
return !found;
}
return true;
})
.join('/');
return url;
}
optionalParams() {
let optional = this.optional || {};
ui: feature-flagged peering mvp (#13425) * add peers route * add peers to nav * use regular app ui patterns peers template * use empty state in peers UI * mock `v1/peerings` request * implement custom adapter/serializer for `peers`-model * index request for peerings on peers route * update peers list to show as proper list * Use tailwind for easier styling * Unique ids in peerings response mock-api * Add styling peerings list * Allow creating empty tooltip To make it easier to iterate over a set of items where some items should not display a tooltip and others should. * Add tooltip Peerings:Badge * Add undefined peering state badge * Remove imported/exported services count peering This won't be included in the initial version of the API response * Implement Peerings::Search * Make it possible to filter peerings by name * Install ember-keyboard For idiomatic handling of key-presses. * Clear peering search input when pressing `Escape` * use peers.index instead of peers for peerings listing * Allow to include peered services in services-query * update services mock to add peerName * add Consul::Peer component To surface peering information on a resource * add PeerName as attribute to service model * surface peering information in service list * Add tooltip to Consul::Peer * Make services searchable by peer-name * Allow passing optional query-params to href-to * Add peer query-param to dc.services.show * Pass peer as query-param services listing * support option peer route-param * set peer-name undefined in services serializer when empty * update peer route-param when navigating to peered service * request sercice with peer-name if need be * make sure to reset peer route-param when leaving service.show * componentize services.peer-info * surface peer info services.show * make sure to reset peer route-param in main nav * fix services breadcrumb services.intentions we need to reset peer route-param here to not break the app * surface peer when querying for it on service api call * query for peer info service-instance api calls * surface peer info service-instance.show * Camelize peer attributes to match rest of app * Refactor peers.index to reflect camelized attributes for peer * Remove unused query-params services.show * make logo href reset peer route-param * Cleanup optional peer param query service-instance * Use replace decorator instead of serializer for empty peerName * make sure to only send peer info when correct qp is passed * Always send qp for querying peers services request * rename with-imports to with-peers * Use css for peer-icon * Refactor bucket-list component to surface peer-info * Remove Consul::Peer component This info is now displayed via the bucket-list component * Fix bucket-list component to surface service again * Update bucket-list docs to reflect peer-info addition * Remove tailwind related styles * Remove consul-tailwind package We won't be using tailwind for now * Fix typo badge scss * Add with-import handling mock-api nodes * Add peerName to node attributes * include peers when querying nodes * reflect api updates node list mock * Create consul::node::peer-info component * Surface peer-info in nodes list * Mock peer response for node request * Make it possible to add peer-name to node request * Update peer route-param when linking to node * Reset peers route-param when leaving nodes.show We need to reset the route-param to not introduce a bug - otherwise subsequent node show request would request with the old peer query-param * Add sourcePeer intentions api mock * add SourcePeer attr to intentions model * Surface peering info on intentions list * Request peered intentions differently intentions.edit * Handle peer info in intentions/exact mock * Surface peering info intention view * Add randomized peer data topology mock * Surface peer info topology view * fix service/peer-info styling We aren't using tailwind anymore - we need to create a custom scss file * Update peerings api mocks * Update peerings::badge with updated styling * cleanup intentions/exact mock * Create watcher component to declaratively register polling * Poll peers in background when on peers route * use existing colors for peering-badge * Add test for requesting service with `with-peers`-query * add imported/exported count to peers model * update mock-api to surface exported/imported count on peers * Show exported/imported peers count on peers list * Use translations for service import/export UI peers * Make sure to ask for nodes with peers * Add match-url step for easier url testing of service urls * Add test for peer-name on peered services * Add test for service navigation peered service * Implement feature-flag handling * Enable peering feature in test and development * Redirect peers to services.index when feature-flag is disabled * Only query for peers when feature is enabled * Only show peers in nav when feature is enabled * Componentize peering service count detail * Handle non-state Peerings::Badge * Use Peerings::ServiceCount in peerings list * Only send peer query for peered service-instances. * Add step to visit url directly * add test for accessing peered service directly * Remove unused service import peers.index * Only query for peer when peer provided node-adapter * fix tests
2022-06-23 13:16:26 +00:00
return ['partition', 'nspace', 'peer'].reduce((prev, item) => {
let value = '';
if (typeof optional[item] !== 'undefined') {
value = optional[item].match;
}
prev[item] = value;
return prev;
}, {});
}
// public entrypoints for app hrefs/URLs
// visit and transitionTo can't be async/await as they return promise-like
// non-promises that get re-wrapped by the addition of async/await
visit() {
return this.transitionTo(...arguments);
}
/**
* Turns a routeName into a full URL string for anchor hrefs etc.
*/
hrefTo(routeName, params, _hash) {
// copy to always work with a new hash even when helper persists hash
const hash = { ..._hash };
if (typeof hash.dc !== 'undefined') {
delete hash.dc;
}
if (typeof hash.nspace !== 'undefined') {
hash.nspace = `~${hash.nspace}`;
}
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
if (typeof hash.partition !== 'undefined') {
hash.partition = `_${hash.partition}`;
ui: Adds Partitions to the HTTP layer (#10447) This PR mainly adds partition to our HTTP adapter. Additionally and perhaps most importantly, we've also taken the opportunity to move our 'conditional namespaces' deeper into the app. The reason for doing this was, we like that namespaces should be thought of as required instead of conditional, 'special' things and would like the same thinking to be applied to partitions. Now, instead of using code throughout the app throughout the adapters to add/remove namespaces or partitions depending on whether they are enabled or not. As a UI engineer you just pretend that namespaces and partitions are always enabled, and we remove them for you deeper in the app, out of the way of you forgetting to treat these properties as a special case. Notes: Added a PartitionAbility while we were there (not used as yet) Started to remove the CONSTANT variables we had just for property names. I prefer that our adapters are as readable and straightforwards as possible, it just looks like HTTP. We'll probably remove our formatDatacenter method we use also at some point, it was mainly too make it look the same as our previous formatNspace, but now we don't have that, it instead now looks different! We enable parsing of partition in the UIs URL, but this is feature flagged so still does nothing just yet. All of the test changes were related to the fact that we were treating client.url as a function rather than a method, and now that we reference this in client.url (etc) it needs binding to client.
2021-09-15 17:09:55 +00:00
}
ui: feature-flagged peering mvp (#13425) * add peers route * add peers to nav * use regular app ui patterns peers template * use empty state in peers UI * mock `v1/peerings` request * implement custom adapter/serializer for `peers`-model * index request for peerings on peers route * update peers list to show as proper list * Use tailwind for easier styling * Unique ids in peerings response mock-api * Add styling peerings list * Allow creating empty tooltip To make it easier to iterate over a set of items where some items should not display a tooltip and others should. * Add tooltip Peerings:Badge * Add undefined peering state badge * Remove imported/exported services count peering This won't be included in the initial version of the API response * Implement Peerings::Search * Make it possible to filter peerings by name * Install ember-keyboard For idiomatic handling of key-presses. * Clear peering search input when pressing `Escape` * use peers.index instead of peers for peerings listing * Allow to include peered services in services-query * update services mock to add peerName * add Consul::Peer component To surface peering information on a resource * add PeerName as attribute to service model * surface peering information in service list * Add tooltip to Consul::Peer * Make services searchable by peer-name * Allow passing optional query-params to href-to * Add peer query-param to dc.services.show * Pass peer as query-param services listing * support option peer route-param * set peer-name undefined in services serializer when empty * update peer route-param when navigating to peered service * request sercice with peer-name if need be * make sure to reset peer route-param when leaving service.show * componentize services.peer-info * surface peer info services.show * make sure to reset peer route-param in main nav * fix services breadcrumb services.intentions we need to reset peer route-param here to not break the app * surface peer when querying for it on service api call * query for peer info service-instance api calls * surface peer info service-instance.show * Camelize peer attributes to match rest of app * Refactor peers.index to reflect camelized attributes for peer * Remove unused query-params services.show * make logo href reset peer route-param * Cleanup optional peer param query service-instance * Use replace decorator instead of serializer for empty peerName * make sure to only send peer info when correct qp is passed * Always send qp for querying peers services request * rename with-imports to with-peers * Use css for peer-icon * Refactor bucket-list component to surface peer-info * Remove Consul::Peer component This info is now displayed via the bucket-list component * Fix bucket-list component to surface service again * Update bucket-list docs to reflect peer-info addition * Remove tailwind related styles * Remove consul-tailwind package We won't be using tailwind for now * Fix typo badge scss * Add with-import handling mock-api nodes * Add peerName to node attributes * include peers when querying nodes * reflect api updates node list mock * Create consul::node::peer-info component * Surface peer-info in nodes list * Mock peer response for node request * Make it possible to add peer-name to node request * Update peer route-param when linking to node * Reset peers route-param when leaving nodes.show We need to reset the route-param to not introduce a bug - otherwise subsequent node show request would request with the old peer query-param * Add sourcePeer intentions api mock * add SourcePeer attr to intentions model * Surface peering info on intentions list * Request peered intentions differently intentions.edit * Handle peer info in intentions/exact mock * Surface peering info intention view * Add randomized peer data topology mock * Surface peer info topology view * fix service/peer-info styling We aren't using tailwind anymore - we need to create a custom scss file * Update peerings api mocks * Update peerings::badge with updated styling * cleanup intentions/exact mock * Create watcher component to declaratively register polling * Poll peers in background when on peers route * use existing colors for peering-badge * Add test for requesting service with `with-peers`-query * add imported/exported count to peers model * update mock-api to surface exported/imported count on peers * Show exported/imported peers count on peers list * Use translations for service import/export UI peers * Make sure to ask for nodes with peers * Add match-url step for easier url testing of service urls * Add test for peer-name on peered services * Add test for service navigation peered service * Implement feature-flag handling * Enable peering feature in test and development * Redirect peers to services.index when feature-flag is disabled * Only query for peers when feature is enabled * Only show peers in nav when feature is enabled * Componentize peering service count detail * Handle non-state Peerings::Badge * Use Peerings::ServiceCount in peerings list * Only send peer query for peered service-instances. * Add step to visit url directly * add test for accessing peered service directly * Remove unused service import peers.index * Only query for peer when peer provided node-adapter * fix tests
2022-06-23 13:16:26 +00:00
if (typeof hash.peer !== 'undefined') {
hash.peer = `:${hash.peer}`;
}
if (typeof this.router === 'undefined') {
this.router = this.container.lookup('router:main');
}
let withOptional = true;
switch (true) {
case routeName === 'settings':
case routeName.startsWith('docs.'):
withOptional = false;
ui: Adds initial CRUD for partitions (#11188) * Add `is` and `test` helpers in a similar vein to `can` Adds 2 new helpers in a similar vein to ember-cans can: - `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability. - `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined. * Adds TextInput component + related modifiers/helpers/machines/services (#11189) Adds a few new components/modifiers/helpers to aid building forms. - state-chart helper, used in lieu of a more generic approach for requiring our statecharts. - A few modifications to our existing disabled modifier. - A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this. - A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date. Documentation is included for all of ^ * ui: Adds initial CRUD for partitions (#11190) Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application. New components: - Consul::Partition::Form - Consul::Partition::List - Consul::Partition::Notifications - Consul::Partition::SearchBar - Consul::Partition::Selector See additional documentation here for more details New Route templates: - index.hbs partition listing/searching/filtering - edit.hbs partition editing and creation Additionally: There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site. Our softDelete functionality has been DRYed out a little to be used across two repos. isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components. * ui: Exclude all debug-like files from the build (#11211) This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
2021-10-08 15:29:30 +00:00
break;
}
if (this.router.currentRouteName.startsWith('docs.')) {
// If we are in docs, then add a default dc as there won't be one in the
// URL
params.unshift(env('CONSUL_DATACENTER_PRIMARY'));
if (routeName.startsWith('dc')) {
// if its an app URL replace it with debugging instead of linking
return `console://${routeName} <= ${JSON.stringify(params)}`;
ui: Adds initial CRUD for partitions (#11188) * Add `is` and `test` helpers in a similar vein to `can` Adds 2 new helpers in a similar vein to ember-cans can: - `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability. - `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined. * Adds TextInput component + related modifiers/helpers/machines/services (#11189) Adds a few new components/modifiers/helpers to aid building forms. - state-chart helper, used in lieu of a more generic approach for requiring our statecharts. - A few modifications to our existing disabled modifier. - A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this. - A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date. Documentation is included for all of ^ * ui: Adds initial CRUD for partitions (#11190) Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application. New components: - Consul::Partition::Form - Consul::Partition::List - Consul::Partition::Notifications - Consul::Partition::SearchBar - Consul::Partition::Selector See additional documentation here for more details New Route templates: - index.hbs partition listing/searching/filtering - edit.hbs partition editing and creation Additionally: There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site. Our softDelete functionality has been DRYed out a little to be used across two repos. isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components. * ui: Exclude all debug-like files from the build (#11211) This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
2021-10-08 15:29:30 +00:00
}
}
const router = this.router._routerMicrolib;
let url;
try {
url = router.generate(routeName, ...params, {
queryParams: {},
});
} catch (e) {
// if the previous generation throws due to params not being available
// its probably due to the view wanting to re-render even though we are
// leaving the view and the router has already moved the state to old
// state so try again with the old state to avoid errors
params = Object.values(router.oldState.params).reduce((prev, item) => {
return prev.concat(Object.keys(item).length > 0 ? item : []);
}, []);
url = router.generate(routeName, ...params);
}
return this.formatURL(url, hash, withOptional);
}
/**
* Takes a full browser URL including rootURL and optional (a full href) and
* performs an ember transition/refresh and browser location update using that
*/
transitionTo(url) {
if (this.router.currentRouteName.startsWith('docs') && url.startsWith('console://')) {
console.info(`location.transitionTo: ${url.substr(10)}`);
ui: Adds initial CRUD for partitions (#11188) * Add `is` and `test` helpers in a similar vein to `can` Adds 2 new helpers in a similar vein to ember-cans can: - `is` allows you to use vocab/phrases such as (is "something model") which calls isSomething() on the models ability. - `test` allows you to use vocab/phrases such as (test "is something model") or (test "can something model")which calls isSomething() / canSomething() on the models ability. Mostly using the is helper and the can helper. It's basically the is/can helper combined. * Adds TextInput component + related modifiers/helpers/machines/services (#11189) Adds a few new components/modifiers/helpers to aid building forms. - state-chart helper, used in lieu of a more generic approach for requiring our statecharts. - A few modifications to our existing disabled modifier. - A new 'validation' modifier, a super small form validation approach built to make use of state charts (optionally). Eventually we should be able to replace our current validation approach (ember-changeset-validations + extra deps) with this. - A new TextInput component, which is the first of our new components specifically to make it easy to build forms with validations. This is still a WIP, I left some comments in pointing out where this one would be progressed, but as we don't need the planned functionality yet, I left it where it was. All of this will be fleshed out more at a later date. Documentation is included for all of ^ * ui: Adds initial CRUD for partitions (#11190) Adds basic CRUD support for partitions. Engineering-wise probably the biggest takeaway here is that we needed to write very little javascript code to add this entire feature, and the little javascript we did need to write was very straightforwards. Everything is pretty much just HTML. Another note to make is that both ember-changeset and ember-data (model layer things) are now completely abstracted away from the view layer of the application. New components: - Consul::Partition::Form - Consul::Partition::List - Consul::Partition::Notifications - Consul::Partition::SearchBar - Consul::Partition::Selector See additional documentation here for more details New Route templates: - index.hbs partition listing/searching/filtering - edit.hbs partition editing and creation Additionally: There is some additional debug work here for better observability and to prevent any errors regarding our href-to usage when a dc is not available in our documentation site. Our softDelete functionality has been DRYed out a little to be used across two repos. isLinkable was removed from our ListCollection component for lists like upstream and service listing, and instead use our new is helper from within the ListCollection, meaning we've added a few more lighterweight templateOnly components. * ui: Exclude all debug-like files from the build (#11211) This PR adds **/*-debug.* to our test/prod excluded files (realised I needed to add test-support.js also so added that here as its more or less the same thing). Conditionally juggling ES6 static imports (specifically debug ones) for this was also getting a little hairy, so I moved it all to use the same approach as our conditional routes. All in all it brings the vendor build back down to ~430kb gzipped.
2021-10-08 15:29:30 +00:00
return true;
}
const previousOptional = Object.entries(this.optionalParams());
const transitionURL = this.getURLForTransition(url);
if (this._previousURL === transitionURL) {
// probably an optional parameter change as the Ember URLs are the same
// whereas the entire URL is different
this.dispatch('push', url);
return Promise.resolve();
// this.setURL(url);
} else {
const currentOptional = this.optionalParams();
if (previousOptional.some(([key, value]) => currentOptional[key] !== value)) {
// an optional parameter change and a normal param change as the Ember
// URLs are different and we know the optional params changed
// TODO: Consider changing the above previousURL === transitionURL to
// use the same 'check the optionalParams' approach
this.dispatch('push', url);
}
// use ember to transition, which will eventually come around to use location.setURL
return this.container.lookup('router:main').transitionTo(transitionURL);
}
}
//
// Ember location interface
/**
* Returns the current `location.pathname` without `rootURL` or `baseURL`
*/
getURL() {
const search = this.location.search || '';
let hash = '';
if (typeof this.location.hash !== 'undefined') {
hash = this.location.hash.substr(0);
}
const url = this.getURLForTransition(this.location.pathname);
return `${url}${search}${hash}`;
}
formatURL(url, optional, withOptional = true) {
if (url !== '') {
// remove trailing slashes if they exists
this.rootURL = this.rootURL.replace(trailingSlashRe, '');
this.baseURL = this.baseURL.replace(trailingSlashRe, '');
} else if (this.baseURL[0] === '/' && this.rootURL[0] === '/') {
// if baseURL and rootURL both start with a slash
// ... remove trailing slash from baseURL if it exists
this.baseURL = this.baseURL.replace(trailingSlashRe, '');
}
if (withOptional) {
const temp = url.split('/');
optional = {
...this.optional,
ui: chore - upgrade ember and friends (#14518) * v3.20.2...v3.24.0 * Fix handle undefined outlet in route component * Don't use template helper for optional modal.open Using the optional-helper here will trigger a computation in the same runloop error. This is because we are setting the `modal`-property when the `<Ref>` component gets rendered which will update the `this.modal`-property which will then recompute the `optional`-helper leading to this error. Instead we will create an action that will call the `open`-method on the modal when it is defined. This gets rid of the double computation error as we will not access the modal property twice in the same runloop when `modal` is getting set. * Fix - fn needs to be passed function tab-nav We create functions in the component file instead so that fn-helper stops complaining about the need to pass a function. * Update ember-exam to 6.1 version "Makes it compatible" with ember-qunit v5 * scheduleOnce setMaxHeight paged-collection We need to schedule to get around double-computation error. * Fix - model.data is removed from ember-data This has been private API all along - we need to work around the removal. Reference: https://github.com/emberjs/data/pull/7338/files#diff-9a8746fc5c86fd57e6122f00fef3155f76f0f3003a24b53fb7c4621d95dcd9bfL1310 * Fix `propContains` instead of `deepEqual` policy Recent model.data works differently than iterating attributes. We use `propContains` instead of `deepEqual`. We are only interested in the properties we assert against and match the previous behavior with this change. * Fix `propContains` instead of `deepEqual` token * Better handling single-records repo test-helper `model.data` has been removed we need to handle proxies and model instances differently. * Fix remaining repository tests with propContains We don't want to match entire objects - we don't care about properties we haven't defined in the assertion. * Don't use template helper for optional modal.open Using a template helper will give us a recomputation error - we work around it by creating an explicit action on the component instead. * Await `I $verb the $pageObject object` step * Fix no more customization ember-can No need to customize, the helper handles destruction fine on its own. * Fix - don't pass `optional` functions to fn We will declare the functions on the component instead. This gives us the same behavior but no error from `fn`, which expects a function to be passed. * Fix - handle `undefined` state on validate modifier StateChart can yield out an undefined `state` we need to handle that in the validate modifier * Fix linting errors tests directory * Warn / turn off new ember linting issues We will tackle them one by one and don't want to autofix issues that could be dangerous to auto-fix. * Auto-fix linting issues * More linting configuration * Fix remaining linting issues * Fix linting issues new files after rebase * ui: Remove ember-cli-uglify config now we are using terser (#14574) Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
2022-09-15 08:43:17 +00:00
...(optional || {}),
};
ui: chore - upgrade ember and friends (#14518) * v3.20.2...v3.24.0 * Fix handle undefined outlet in route component * Don't use template helper for optional modal.open Using the optional-helper here will trigger a computation in the same runloop error. This is because we are setting the `modal`-property when the `<Ref>` component gets rendered which will update the `this.modal`-property which will then recompute the `optional`-helper leading to this error. Instead we will create an action that will call the `open`-method on the modal when it is defined. This gets rid of the double computation error as we will not access the modal property twice in the same runloop when `modal` is getting set. * Fix - fn needs to be passed function tab-nav We create functions in the component file instead so that fn-helper stops complaining about the need to pass a function. * Update ember-exam to 6.1 version "Makes it compatible" with ember-qunit v5 * scheduleOnce setMaxHeight paged-collection We need to schedule to get around double-computation error. * Fix - model.data is removed from ember-data This has been private API all along - we need to work around the removal. Reference: https://github.com/emberjs/data/pull/7338/files#diff-9a8746fc5c86fd57e6122f00fef3155f76f0f3003a24b53fb7c4621d95dcd9bfL1310 * Fix `propContains` instead of `deepEqual` policy Recent model.data works differently than iterating attributes. We use `propContains` instead of `deepEqual`. We are only interested in the properties we assert against and match the previous behavior with this change. * Fix `propContains` instead of `deepEqual` token * Better handling single-records repo test-helper `model.data` has been removed we need to handle proxies and model instances differently. * Fix remaining repository tests with propContains We don't want to match entire objects - we don't care about properties we haven't defined in the assertion. * Don't use template helper for optional modal.open Using a template helper will give us a recomputation error - we work around it by creating an explicit action on the component instead. * Await `I $verb the $pageObject object` step * Fix no more customization ember-can No need to customize, the helper handles destruction fine on its own. * Fix - don't pass `optional` functions to fn We will declare the functions on the component instead. This gives us the same behavior but no error from `fn`, which expects a function to be passed. * Fix - handle `undefined` state on validate modifier StateChart can yield out an undefined `state` we need to handle that in the validate modifier * Fix linting errors tests directory * Warn / turn off new ember linting issues We will tackle them one by one and don't want to autofix issues that could be dangerous to auto-fix. * Auto-fix linting issues * More linting configuration * Fix remaining linting issues * Fix linting issues new files after rebase * ui: Remove ember-cli-uglify config now we are using terser (#14574) Co-authored-by: John Cowen <johncowen@users.noreply.github.com>
2022-09-15 08:43:17 +00:00
optional = Object.values(optional)
.filter((item) => Boolean(item))
.map((item) => item.value || item, []);
temp.splice(...[1, 0].concat(optional));
url = temp.join('/');
}
return `${this.baseURL}${this.rootURL}${url}`;
}
/**
* Change URL takes an ember application URL
*/
changeURL(type, path) {
this.path = path;
const state = this.machine.state;
path = this.formatURL(path);
if (!state || state.path !== path) {
this.dispatch(type, path);
}
}
setURL(path) {
// this.optional = {};
this.changeURL('push', path);
}
replaceURL(path) {
this.changeURL('replace', path);
}
onUpdateURL(callback) {
this.callback = callback;
}
//
/**
* Dispatch takes a full actual browser URL with all the rootURL and optional
* params if they exist
*/
dispatch(event, path) {
const state = {
path: path,
uuid: _uuid(),
};
this.machine[`${event}State`](state, null, path);
// popstate listeners only run from a browser action not when a state change
// is called directly, so manually call the popstate listener.
// https://developer.mozilla.org/en-US/docs/Web/API/Window/popstate_event#the_history_stack
this.route({ state: state });
}
willDestroy() {
this.doc.defaultView.removeEventListener('popstate', this.route);
}
}