open-consul/website/content/docs/k8s/crds/index.mdx

422 lines
13 KiB
Plaintext
Raw Normal View History

2020-10-09 19:54:15 +00:00
---
layout: docs
page_title: Consul Custom Resource Definitions
2020-10-09 19:54:15 +00:00
description: >-
Consul supports managing configuration entries via Kubernetes Custom Resources.
2020-10-09 19:54:15 +00:00
These custom resource can be used to manage the configuration for workloads
deployed within the cluster.
---
# Custom Resource Definitions
2020-10-09 19:54:15 +00:00
This topic describes how to manage Consul [configuration entries](/docs/agent/config-entries)
via Kubernetes Custom Resources. Configuration entries provide cluster-wide defaults for the service mesh.
2020-10-09 23:58:21 +00:00
## Requirements
2020-10-09 23:58:21 +00:00
* consul-helm 0.28.0 or later
* consul-k8s 0.22.0 or later
* consul 1.8.4 or later; some configuration entries require a newer version of Consul
2020-10-09 23:58:21 +00:00
## Supported Configuration Entries
You can specify the following values in the `kind` field. Click on a configuration entry to view its documentation:
- [`Mesh`](/docs/connect/config-entries/mesh) (requires Consul 1.10.0+)
- [`ExportedServices`](/docs/connect/config-entries/exported-services) <EnterpriseAlert inline />
- [`ProxyDefaults`](/docs/connect/config-entries/proxy-defaults)
- [`ServiceDefaults`](/docs/connect/config-entries/service-defaults)
- [`ServiceSplitter`](/docs/connect/config-entries/service-splitter)
- [`ServiceRouter`](/docs/connect/config-entries/service-router)
- [`ServiceResolver`](/docs/connect/config-entries/service-resolver)
- [`ServiceIntentions`](/docs/connect/config-entries/service-intentions) (requires Consul 1.9.0+)
- [`IngressGateway`](/docs/connect/config-entries/ingress-gateway)
- [`TerminatingGateway`](/docs/connect/config-entries/terminating-gateway)
2020-10-09 23:58:21 +00:00
## Installation
Verify that the minimum version of the helm chart (`0.28.0`) is installed:
2020-10-09 23:58:21 +00:00
```shell-session
$ helm search repo hashicorp/consul
NAME CHART VERSION APP VERSION DESCRIPTION
hashicorp/consul 0.28.0 1.9.1 Official HashiCorp Consul Chart
2020-10-09 23:58:21 +00:00
```
Update your helm repository cache if necessary:
2020-10-09 23:58:21 +00:00
```shell-session
$ helm repo update
Hang tight while we grab the latest from your chart repositories...
...Successfully got an update from the "hashicorp" chart repository
Update Complete. ⎈Happy Helming!⎈
```
Next, you must configure consul-helm via your `values.yaml` to install the custom resource definitions
and enable the controller that acts on them:
<CodeBlockConfig filename="values.yaml" highlight="4-5,7-8">
2020-10-09 23:58:21 +00:00
```yaml
global:
name: consul
controller:
enabled: true
connectInject:
enabled: true
```
</CodeBlockConfig>
2020-10-09 23:58:21 +00:00
Note that:
1. `controller.enabled: true` installs the CRDs and enables the controller.
1. Configuration entries are used to configure Consul service mesh so it's also
expected that `connectInject` will be enabled.
See [Install with Helm Chart](/docs/k8s/installation/install) for further installation
instructions.
## Upgrading An Existing Cluster to CRDs
If you have an existing Consul cluster running on Kubernetes you may need to perform
extra steps to migrate to CRDs. See [Upgrade An Existing Cluster to CRDs](/docs/k8s/crds/upgrade-to-crds) for full instructions.
2020-10-09 23:58:21 +00:00
## Usage
Once installed, you can use `kubectl` to create and manage Consul's configuration entries.
2020-10-09 23:58:21 +00:00
### Create
You can create configuration entries via `kubectl apply`.
2020-10-09 23:58:21 +00:00
```shell-session
$ cat <<EOF | kubectl apply --filename -
2020-10-09 23:58:21 +00:00
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceDefaults
metadata:
name: foo
spec:
protocol: "http"
EOF
servicedefaults.consul.hashicorp.com/foo created
```
See [Configuration Entries](/docs/agent/config-entries) for detailed schema documentation.
2020-10-09 23:58:21 +00:00
### Get
You can use `kubectl get [kind] [name]` to get the status of the configuration entry:
2020-10-09 23:58:21 +00:00
```shell-session
$ kubectl get servicedefaults foo
NAME SYNCED
foo True
```
The `SYNCED` status shows whether the configuration entry was successfully created
in Consul.
### Describe
You can use `kubectl describe [kind] [name]` to investigate the status of the
2020-10-09 23:58:21 +00:00
configuration entry. If `SYNCED` is false, the status will contain the reason
why.
```shell-session
$ kubectl describe servicedefaults foo
Status:
Conditions:
Last Transition Time: 2020-10-09T21:15:50Z
Status: True
Type: Synced
```
### Edit
You can use `kubectl edit [kind] [name]` to edit the configuration entry:
2020-10-09 23:58:21 +00:00
```shell
$ kubectl edit servicedefaults foo
# change protocol: http => protocol: tcp
servicedefaults.consul.hashicorp.com/foo edited
```
You can then use `kubectl get` to ensure the change was synced to Consul:
2020-10-09 23:58:21 +00:00
```shell-session
$ kubectl get servicedefaults foo
NAME SYNCED
foo True
```
### Delete
You can use `kubectl delete [kind] [name]` to delete the configuration entry:
2020-10-09 23:58:21 +00:00
```shell-session
$ kubectl delete servicedefaults foo
servicedefaults.consul.hashicorp.com "foo" deleted
```
You can then use `kubectl get` to ensure the configuration entry was deleted:
2020-10-09 23:58:21 +00:00
```shell-session
$ kubectl get servicedefaults foo
Error from server (NotFound): servicedefaults.consul.hashicorp.com "foo" not found
```
#### Delete Hanging
If running `kubectl delete` hangs without exiting, there may be
a dependent configuration entry registered with Consul that prevents the target configuration entry from being
2020-10-09 23:58:21 +00:00
deleted. For example, if you set the protocol of your service to `http` via `ServiceDefaults` and then
create a `ServiceSplitter`, you won't be able to delete the `ServiceDefaults`.
This is because by deleting the `ServiceDefaults` config, you are setting the
protocol back to the default which is `tcp`. Since `ServiceSplitter` requires
that the service has an `http` protocol, Consul will not allow the `ServiceDefaults`
to be deleted since that would put Consul into a broken state.
In order to delete the `ServiceDefaults` config, you would need to first delete
2020-10-09 23:58:21 +00:00
the `ServiceSplitter`.
## Kubernetes Namespaces
### Consul OSS
Consul Open Source (Consul OSS) ignores Kubernetes namespaces and registers all services into the same
global Consul registry based on their names. For example, service `web` in Kubernetes namespace
`web-ns` and service `admin` in Kubernetes namespace `admin-ns` will be registered into
Consul as `web` and `admin` with the Kubernetes source namespace ignored.
When creating custom resources to configure these services, the namespace of the
custom resource is also ignored. For example, you can create a `ServiceDefaults`
custom resource for service `web` in the Kubernetes namespace `admin-ns` even though
the `web` service is actually running in the `web-ns` namespace (although this is not recommended):
```yaml
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceDefaults
metadata:
name: web
namespace: admin-ns
spec:
protocol: http
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: web
namespace: web-ns
spec: ...
```
~> **NOTE:** If two custom resources of the same kind **and** the same name are attempted to
be created in different Kubernetes namespaces, the last one created will not be synced.
#### ServiceIntentions Special Case
`ServiceIntentions` are different from the other custom resources because the
name of the resource doesn't matter. For other resources, the name of the resource
determines which service it configures. For example, this resource configures
the service `web`:
<CodeBlockConfig highlight="4">
```yaml
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceDefaults
metadata:
name: web
spec:
protocol: http
```
</CodeBlockConfig>
For `ServiceIntentions`, because we need to support the ability to create
wildcard intentions (e.g. `foo => * (allow)` meaning that `foo` can talk to **any** service),
and because `*` is not a valid Kubernetes resource name, we instead use the field `spec.destination.name`
to configure the destination service for the intention:
<CodeBlockConfig highlight="6-8,18-20">
```yaml
# foo => * (allow)
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceIntentions
metadata:
name: name-does-not-matter
spec:
destination:
name: '*'
sources:
- name: foo
action: allow
---
# foo => web (allow)
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceIntentions
metadata:
name: name-does-not-matter
spec:
destination:
name: web
sources:
- name: foo
action: allow
```
</CodeBlockConfig>
~> **NOTE:** If two `ServiceIntentions` resources set the same `spec.destination.name`, the
last one created will not be synced.
### Consul Enterprise <EnterpriseAlert inline />
Consul Enterprise supports multiple configurations for how Kubernetes namespaces are mapped
to Consul namespaces. The Consul namespace that the custom resource is registered
into depends on the configuration being used but in general, you should create your
custom resources in the same Kubernetes namespace as the service they're configuring and
everything will work as expected.
The details on each configuration are:
1. **Mirroring** - The Kubernetes namespace will be "mirrored" into Consul, i.e.
service `web` in Kubernetes namespace `web-ns` will be registered as service `web`
in the Consul namespace `web-ns`. In the same vein, a `ServiceDefaults` custom resource with
name `web` in Kubernetes namespace `web-ns` will configure that same service.
This is configured via [`connectInject.consulNamespaces`](/docs/k8s/helm#v-connectinject-consulnamespaces):
<CodeBlockConfig highlight="6-7">
```yaml
global:
name: consul
enableConsulNamespaces: true
image: hashicorp/consul-enterprise:<tag>-ent
connectInject:
consulNamespaces:
mirroringK8S: true
```
</CodeBlockConfig>
1. **Mirroring with prefix** - The Kubernetes namespace will be "mirrored" into Consul
with a prefix added to the Consul namespace, i.e.
if the prefix is `k8s-` then service `web` in Kubernetes namespace `web-ns` will be registered as service `web`
in the Consul namespace `k8s-web-ns`. In the same vein, a `ServiceDefaults` custom resource with
name `web` in Kubernetes namespace `web-ns` will configure that same service.
This is configured via [`connectInject.consulNamespaces`](/docs/k8s/helm#v-connectinject-consulnamespaces):
<CodeBlockConfig highlight="8">
```yaml
global:
name: consul
enableConsulNamespaces: true
image: hashicorp/consul-enterprise:<tag>-ent
connectInject:
consulNamespaces:
mirroringK8S: true
mirroringK8SPrefix: k8s-
```
</CodeBlockConfig>
1. **Single destination namespace** - The Kubernetes namespace is ignored and all services
will be registered into the same Consul namespace, i.e. if the destination Consul
namespace is `my-ns` then service `web` in Kubernetes namespace `web-ns` will
be registered as service `web` in Consul namespace `my-ns`.
In this configuration, the Kubernetes namespace of the custom resource is ignored.
For example, a `ServiceDefaults` custom resource with the name `web` in Kubernetes
namespace `admin-ns` will configure the service with name `web` even though that
service is running in Kubernetes namespace `web-ns` because the `ServiceDefaults`
resource ends up registered into the same Consul namespace `my-ns`.
This is configured via [`connectInject.consulNamespaces`](/docs/k8s/helm#v-connectinject-consulnamespaces):
<CodeBlockConfig highlight="7">
```yaml
global:
name: consul
enableConsulNamespaces: true
image: hashicorp/consul-enterprise:<tag>-ent
connectInject:
consulNamespaces:
consulDestinationNamespace: 'my-ns'
```
</CodeBlockConfig>
~> **NOTE:** In this configuration, if two custom resources of the same kind **and** the same name are attempted to
be created in two Kubernetes namespaces, the last one created will not be synced.
#### ServiceIntentions Special Case (Enterprise)
`ServiceIntentions` are different from the other custom resources because the
name of the resource doesn't matter. For other resources, the name of the resource
determines which service it configures. For example, this resource configures
the service `web`:
<CodeBlockConfig highlight="4">
```yaml
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceDefaults
metadata:
name: web
spec:
protocol: http
```
</CodeBlockConfig>
For `ServiceIntentions`, because we need to support the ability to create
wildcard intentions (e.g. `foo => * (allow)` meaning that `foo` can talk to **any** service),
and because `*` is not a valid Kubernetes resource name, we instead use the field `spec.destination.name`
to configure the destination service for the intention:
<CodeBlockConfig highlight="6-8,18-20">
```yaml
# foo => * (allow)
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceIntentions
metadata:
name: name-does-not-matter
spec:
destination:
name: '*'
sources:
- name: foo
action: allow
---
# foo => web (allow)
apiVersion: consul.hashicorp.com/v1alpha1
kind: ServiceIntentions
metadata:
name: name-does-not-matter
spec:
destination:
name: web
sources:
- name: foo
action: allow
```
</CodeBlockConfig>
In addition, we support the field `spec.destination.namespace` to configure
the destination service's Consul namespace. If `spec.destination.namespace`
is empty, then the Consul namespace used will be the same as the other
config entries as outlined above.